It’s a really good piece of kit. Even the keyboard is not too bad even though I am unlikely to use it or the mouse. The real shame is the pen. I would use that but it’s very disappointing, maybe I just need to get used to it.
It claims to be:
- Chemical Free
- Antioxidants
But antioxidants are chemical compounds…
Must be one of those miracles 
TP-LINK Deco X10 WiFi 6
We upgraded our net to faster one and when testing WiFi I noticed that it was really slow compared to new speed. Started digging around and asked from customer-service and found out that the box was notorious from it’s mind numbing slow WiFi speed.
So went and bought this. Now we get WiFi almost as fast as compared from wall. 
is it dd-wrt or openwrt compatible ?
How did you get vanilla Arch on there? You should be able to install and run Raspberry Pi OS from a Flash Drive first and then run those scripts and then see if your nvme installation will work. You might have to do it multiple times to get the scripts to to work/install right. I’ve had to do it 4 or 5 times before it would work and I’m testing MX-Linux 23.5 on it now. There’s also a V3_script_check.pdf that you can find online. Also there’s a firmware update for the RP2040 Chip that’s in there.
Here the bags are 4lbs 8.5lbs and 17.6 lbs or 1.5kg 3 kg 8 kg. They have multicare stress urinary care and also multicare urinary care. Around 58.95 Cdn plus taxes for 1.5kg 3 kg is almost double. 8 kg is 4x price of 1.5 kg.
I initially installed EOS on the microSD card. Then I booted from the microSD card & followed the instructions here to set up Arch. I deviated slightly from the guide in setting up an ext4 filesystem. The guide’s also a little out if date. You need linux-rpi-16k for the Pi 5 now. Not linux-rpi. The manual that comes with the Argon ONE V3 NVMe case lists some eeprom & /boot/config.txt parameters to set in order to get sufficient power to the PCIe interface, & to be able to boot from it. Otherwise, all I altered was to change the location of the root partition in the /boot/cmdline.text file. When I rebooted it booted from the SSD. I then removed the microSD.
Okay. Thanks. I’ll give it a shot.
If you really want to give your cat good food, go barfing. Cats need fresh meat, they are true carnivores.
That is true. But in case of barfing you have to make sure cat gets enough vitamins and in case of urinary problems this is not necessarily the best choice.
Well, vitaminsupplements (for example via added vegetables) are an important part of barfing, so that must be done right. Sad truth is: Most vets never heard of barfing, and (in germany at least) most vets have contracts with food producers… Shit show.
And fresh meat with enough (good) liquid is often the best solution, even with urinary issues. These often come from a diet based on too dry or too processed food.
My cousin did barfing for her dog and it worked well for her. This cat of ours starts to be senior and there have never been issues considering his health. And not every meat is good in the case of barfing with cat that has vulnerability considering urinary issues so you have to be really careful with it.
But I am not certain if this is right place to have this discussion, because after all, this is thread about purchases. 
I am not certain about dd-wrt. Older models of this were apparently not compatible with openwrt, but couldn’t find info about this newer model. 
message me the details about those scripts, let me see what I can do
Or start a topic in arm category
I’m bad with these types of questions and I can’t even identify what this part is. But looking it I assume those are 4 electrical terminals on the end (I could be wrong). I will guess anyway, this isn’t a part of a hydraulic press by any chance?
build in 1976 it makes simply awesome espresso and is very simple.
Looks like a heating coil.