Hello,
I’ve been having an odd problem where my XPpen tablet (XP pen artist 15.6) will randomly freeze my system. Here is the output from the log in /var/log/
/var/log/ dump
[ 11.242]
X.Org X Server 1.21.1.14
X Protocol Version 11, Revision 0
[ 11.242] Current Operating System: Linux [PC] 6.11.7-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 08 Nov 2024 17:57:56 +0000 x86_64
[ 11.242] Kernel command line: initrd=\4530fcc87bd24f35b52b27ef29a6dc6e\6.11.7-arch1-1\initrd nvme_load=YES nowatchdog rw root=UUID=0cc9f05e-15e6-4e73-881d-f1147fd9f1c1 nvidia_drm.modeset=1 rw root=UUID=0cc9f05e-15e6-4e73-881d-f1147fd9f1c1 nvidia_drm.modeset=1 systemd.machine_id=4530fcc87bd24f35b52b27ef29a6dc6e
[ 11.242]
[ 11.242] Current version of pixman: 0.44.0
[ 11.242] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.242] Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.242] (==) Log file: “/var/log/Xorg.0.log”, Time: Thu Nov 21 15:25:04 2024
[ 11.244] (==) Using config directory: “/etc/X11/xorg.conf.d”
[ 11.244] (==) Using system config directory “/usr/share/X11/xorg.conf.d”
[ 11.245] (==) No Layout section. Using the first Screen section.
[ 11.245] (==) No screen section available. Using defaults.
[ 11.245] () |–>Screen “Default Screen Section” (0)
[ 11.245] () | |–>Monitor “”
[ 11.245] (==) No monitor specified for screen “Default Screen Section”.
Using a default monitor configuration.
[ 11.245] () Allowing byte-swapped clients
[ 11.245] (==) Automatically adding devices
[ 11.245] (==) Automatically enabling devices
[ 11.245] (==) Automatically adding GPU devices
[ 11.245] (==) Automatically binding GPU devices
[ 11.245] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.245] (WW) The directory “/usr/share/fonts/misc” does not exist.
[ 11.245] Entry deleted from font path.
[ 11.245] (WW) `fonts.dir’ not found (or not valid) in “/usr/share/fonts/TTF”.
[ 11.245] Entry deleted from font path.
[ 11.245] (Run ‘mkfontdir’ on “/usr/share/fonts/TTF”).
[ 11.245] (WW) The directory “/usr/share/fonts/OTF” does not exist.
[ 11.245] Entry deleted from font path.
[ 11.245] (WW) The directory “/usr/share/fonts/Type1” does not exist.
[ 11.245] Entry deleted from font path.
[ 11.245] (WW) The directory “/usr/share/fonts/100dpi” does not exist.
[ 11.245] Entry deleted from font path.
[ 11.245] (WW) The directory “/usr/share/fonts/75dpi” does not exist.
[ 11.245] Entry deleted from font path.
[ 11.245] (==) FontPath set to:
[ 11.245] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 11.245] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.245] (II) Module ABI versions:
[ 11.245] X.Org ANSI C Emulation: 0.4
[ 11.245] X.Org Video Driver: 25.2
[ 11.245] X.Org XInput driver : 24.4
[ 11.245] X.Org Server Extension : 10.0
[ 11.245] (++) using VT number 7
[ 11.245] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 11.246] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.246] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.1/0000:01:00.0/drm/card0
[ 11.258] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11.258] (II) Platform probe for /sys/devices/pci0000:00/0000:00:08.1/0000:10:00.0/drm/card1
[ 11.284] () OutputClass “nvidia” ModulePath extended to “/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules”
[ 11.286] (–) PCI:*(1@0:0:0) 10de:2504:1458:40e2 rev 161, Mem @ 0xf5000000/16777216, 0xf800000000/17179869184, 0xfc00000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x???/524288
[ 11.286] (–) PCI: (16@0:0:0) 1002:164e:1458:d000 rev 195, Mem @ 0xfc10000000/268435456, 0xfc20000000/2097152, 0xf6a00000/524288, I/O @ 0x0000e000/256
[ 11.286] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.286] (II) LoadModule: “glx”
[ 11.286] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.291] (II) Module glx: vendor=“X.Org Foundation”
[ 11.291] compiled for 1.21.1.14, module version = 1.0.0
[ 11.291] ABI class: X.Org Server Extension, version 10.0
[ 11.291] (II) Applying OutputClass “nvidia” to /dev/dri/card0
[ 11.291] loading driver: nvidia
[ 11.291] (II) Applying OutputClass “AMDgpu” to /dev/dri/card1
[ 11.291] loading driver: amdgpu
[ 11.291] (==) Matched nvidia as autoconfigured driver 0
[ 11.291] (==) Matched nouveau as autoconfigured driver 1
[ 11.291] (==) Matched nv as autoconfigured driver 2
[ 11.291] (==) Matched amdgpu as autoconfigured driver 3
[ 11.291] (==) Matched ati as autoconfigured driver 4
[ 11.291] (==) Matched modesetting as autoconfigured driver 5
[ 11.291] (==) Matched fbdev as autoconfigured driver 6
[ 11.291] (==) Matched vesa as autoconfigured driver 7
[ 11.291] (==) Assigned the driver to the xf86ConfigLayout
[ 11.291] (II) LoadModule: “nvidia”
[ 11.291] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.294] (II) Module nvidia: vendor=“NVIDIA Corporation”
[ 11.294] compiled for 1.6.99.901, module version = 1.0.0
[ 11.294] Module class: X.Org Video Driver
[ 11.294] (II) LoadModule: “nouveau”
[ 11.295] (WW) Warning, couldn’t open module nouveau
[ 11.295] (EE) Failed to load module “nouveau” (module does not exist, 0)
[ 11.295] (II) LoadModule: “nv”
[ 11.295] (WW) Warning, couldn’t open module nv
[ 11.295] (EE) Failed to load module “nv” (module does not exist, 0)
[ 11.295] (II) LoadModule: “amdgpu”
[ 11.295] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 11.372] (II) Module amdgpu: vendor=“X.Org Foundation”
[ 11.372] compiled for 1.21.1.11, module version = 23.0.0
[ 11.372] Module class: X.Org Video Driver
[ 11.372] ABI class: X.Org Video Driver, version 25.2
[ 11.372] (II) LoadModule: “ati”
[ 11.372] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 11.372] (II) Module ati: vendor=“X.Org Foundation”
[ 11.372] compiled for 1.21.1.11, module version = 22.0.0
[ 11.372] Module class: X.Org Video Driver
[ 11.372] ABI class: X.Org Video Driver, version 25.2
[ 11.399] (II) LoadModule: “modesetting”
[ 11.399] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.400] (II) Module modesetting: vendor=“X.Org Foundation”
[ 11.400] compiled for 1.21.1.14, module version = 1.21.1
[ 11.400] Module class: X.Org Video Driver
[ 11.400] ABI class: X.Org Video Driver, version 25.2
[ 11.400] (II) LoadModule: “fbdev”
[ 11.400] (WW) Warning, couldn’t open module fbdev
[ 11.400] (EE) Failed to load module “fbdev” (module does not exist, 0)
[ 11.400] (II) LoadModule: “vesa”
[ 11.400] (WW) Warning, couldn’t open module vesa
[ 11.400] (EE) Failed to load module “vesa” (module does not exist, 0)
[ 11.400] (II) NVIDIA dlloader X Driver 565.57.01 Thu Oct 10 12:05:50 UTC 2024
[ 11.400] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.400] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 11.400] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.409] (II) Loading sub module “fb”
[ 11.409] (II) LoadModule: “fb”
[ 11.409] (II) Module “fb” already built-in
[ 11.409] (II) Loading sub module “wfb”
[ 11.409] (II) LoadModule: “wfb”
[ 11.409] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.410] (II) Module wfb: vendor=“X.Org Foundation”
[ 11.410] compiled for 1.21.1.14, module version = 1.0.0
[ 11.410] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.410] (WW) Falling back to old probe method for modesetting
[ 11.426] (II) NVIDIA(0): Creating default Display subsection in Screen section
“Default Screen Section” for depth/fbbpp 24/32
[ 11.426] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11.426] (==) NVIDIA(0): RGB weight 888
[ 11.426] (==) NVIDIA(0): Default visual is TrueColor
[ 11.426] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.426] (II) Applying OutputClass “nvidia” options to /dev/dri/card0
[ 11.426] () NVIDIA(0): Option “AllowEmptyInitialConfiguration”
[ 11.427] () NVIDIA(0): Enabling 2D acceleration
[ 11.427] (II) Loading sub module “glxserver_nvidia”
[ 11.427] (II) LoadModule: “glxserver_nvidia”
[ 11.427] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[ 11.482] (II) Module glxserver_nvidia: vendor=“NVIDIA Corporation”
[ 11.482] compiled for 1.6.99.901, module version = 1.0.0
[ 11.482] Module class: X.Org Server Extension
[ 11.482] (II) NVIDIA GLX Module 565.57.01 Thu Oct 10 12:09:28 UTC 2024
[ 11.483] (II) NVIDIA: The X server supports PRIME Render Offload.
[ 11.485] (–) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:1:0:0
[ 11.485] (–) NVIDIA(0): DFP-0
[ 11.485] (–) NVIDIA(0): DFP-1
[ 11.485] (–) NVIDIA(0): DFP-2
[ 11.485] (–) NVIDIA(0): DFP-3 (boot)
[ 11.485] (–) NVIDIA(0): DFP-4
[ 11.485] (–) NVIDIA(0): DFP-5
[ 11.496] (II) NVIDIA(0): NVIDIA GPU NVIDIA GeForce RTX 3060 (GA106-A) at PCI:1:0:0
[ 11.496] (II) NVIDIA(0): (GPU-0)
[ 11.496] (–) NVIDIA(0): Memory: 12582912 kBytes
[ 11.496] (–) NVIDIA(0): VideoBIOS: 94.06.2f.40.95
[ 11.496] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11.594] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): connected
[ 11.594] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): Internal TMDS
[ 11.594] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): 600.0 MHz maximum pixel clock
[ 11.594] (–) NVIDIA(GPU-0):
[ 11.594] (–) NVIDIA(GPU-0): DFP-1: disconnected
[ 11.594] (–) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 11.594] (–) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[ 11.594] (–) NVIDIA(GPU-0):
[ 11.594] (–) NVIDIA(GPU-0): DFP-2: disconnected
[ 11.594] (–) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 11.594] (–) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 11.594] (–) NVIDIA(GPU-0):
[ 11.639] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): connected
[ 11.639] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): Internal TMDS
[ 11.639] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): 600.0 MHz maximum pixel clock
[ 11.639] (–) NVIDIA(GPU-0):
[ 11.639] (–) NVIDIA(GPU-0): DFP-4: disconnected
[ 11.639] (–) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 11.639] (–) NVIDIA(GPU-0): DFP-4: 2670.0 MHz maximum pixel clock
[ 11.639] (–) NVIDIA(GPU-0):
[ 11.640] (–) NVIDIA(GPU-0): DFP-5: disconnected
[ 11.640] (–) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 11.640] (–) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[ 11.640] (–) NVIDIA(GPU-0):
[ 11.680] (==) NVIDIA(0):
[ 11.680] (==) NVIDIA(0): No modes were requested; the default mode “nvidia-auto-select”
[ 11.680] (==) NVIDIA(0): will be used as the requested mode.
[ 11.680] (==) NVIDIA(0):
[ 11.683] (II) NVIDIA(0): Validated MetaModes:
[ 11.683] (II) NVIDIA(0): “DFP-3:nvidia-auto-select,DFP-0:nvidia-auto-select”
[ 11.683] (II) NVIDIA(0): Virtual screen size determined to be 3520 x 1080
[ 11.802] (–) NVIDIA(0): DPI set to (92, 91); computed from “UseEdidDpi” X config
[ 11.802] (–) NVIDIA(0): option
[ 11.802] (==) AMDGPU(G0): Depth 24, (–) framebuffer bpp 32
[ 11.802] (II) AMDGPU(G0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 11.802] (==) AMDGPU(G0): Default visual is TrueColor
[ 11.802] (II) Applying OutputClass “AMDgpu” options to /dev/dri/card1
[ 11.802] (==) AMDGPU(G0): RGB weight 888
[ 11.802] (II) AMDGPU(G0): Using 8 bits per RGB (8 bit DAC)
[ 11.802] (–) AMDGPU(G0): Chipset: “AMD Radeon Graphics” (ChipID = 0x164e)
[ 11.802] (II) Loading sub module “fb”
[ 11.802] (II) LoadModule: “fb”
[ 11.802] (II) Module “fb” already built-in
[ 11.802] (II) Loading sub module “dri2”
[ 11.802] (II) LoadModule: “dri2”
[ 11.802] (II) Module “dri2” already built-in
[ 11.848] (II) Loading sub module “glamoregl”
[ 11.848] (II) LoadModule: “glamoregl”
[ 11.848] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 11.852] (II) Module glamoregl: vendor=“X.Org Foundation”
[ 11.852] compiled for 1.21.1.14, module version = 1.0.1
[ 11.852] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.895] (II) AMDGPU(G0): glamor X acceleration enabled on AMD Radeon Graphics (radeonsi, raphael_mendocino, LLVM 18.1.8, DRM 3.59, 6.11.7-arch1-1)
[ 11.895] (II) AMDGPU(G0): glamor detected, initialising EGL layer.
[ 11.895] (==) AMDGPU(G0): TearFree property default: auto
[ 11.896] (II) AMDGPU(G0): Output HDMI-A-1-2 has no monitor section
[ 11.896] (II) AMDGPU(G0): Output DisplayPort-1-2 has no monitor section
[ 11.896] (II) AMDGPU(G0): Output DisplayPort-1-3 has no monitor section
[ 11.896] (II) AMDGPU(G0): Output DisplayPort-1-4 has no monitor section
[ 11.899] (II) AMDGPU(G0): EDID for output HDMI-A-1-2
[ 11.899] (II) AMDGPU(G0): Manufacturer: UGD Model: 1501 Serial#: 538968854
[ 11.899] (II) AMDGPU(G0): Year: 2020 Week: 14
[ 11.899] (II) AMDGPU(G0): EDID Version: 1.3
[ 11.899] (II) AMDGPU(G0): Digital Display Input
[ 11.899] (II) AMDGPU(G0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 11.899] (II) AMDGPU(G0): Gamma: 2.20
[ 11.899] (II) AMDGPU(G0): No DPMS capabilities specified
[ 11.899] (II) AMDGPU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.899] (II) AMDGPU(G0): First detailed timing is preferred mode
[ 11.899] (II) AMDGPU(G0): redX: 0.664 redY: 0.322 greenX: 0.306 greenY: 0.571
[ 11.899] (II) AMDGPU(G0): blueX: 0.143 blueY: 0.068 whiteX: 0.310 whiteY: 0.321
[ 11.899] (II) AMDGPU(G0): Supported established timings:
[ 11.899] (II) AMDGPU(G0): 640x480@60Hz
[ 11.899] (II) AMDGPU(G0): 800x600@60Hz
[ 11.899] (II) AMDGPU(G0): 1024x768@60Hz
[ 11.899] (II) AMDGPU(G0): Manufacturer’s mask: 0
[ 11.899] (II) AMDGPU(G0): Supported standard timings:
[ 11.899] (II) AMDGPU(G0): #0: hsize: 1152 vsize 648 refresh: 60 vid: 49265
[ 11.899] (II) AMDGPU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 11.899] (II) AMDGPU(G0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 11.899] (II) AMDGPU(G0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
[ 11.899] (II) AMDGPU(G0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 11.899] (II) AMDGPU(G0): #6: hsize: 1680 vsize 1050 refresh: 61 vid: 435
[ 11.899] (II) AMDGPU(G0): Supported detailed timing:
[ 11.899] (II) AMDGPU(G0): clock: 149.0 MHz Image Size: 344 x 193 mm
[ 11.899] (II) AMDGPU(G0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2200 h_border: 0
[ 11.899] (II) AMDGPU(G0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1128 v_border: 0
[ 11.899] (II) AMDGPU(G0): Monitor name: Artist 15.6
[ 11.899] (II) AMDGPU(G0): Serial No: 20200316
[ 11.899] (II) AMDGPU(G0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 70 kHz, PixClock max 175 MHz
[ 11.899] (II) AMDGPU(G0): EDID (in hex):
[ 11.899] (II) AMDGPU(G0): 00ffffffffffff0054e4011516032020
[ 11.899] (II) AMDGPU(G0): 0e1e0103802213780a25a5aa524e9224
[ 11.899] (II) AMDGPU(G0): 114f5221080071c0818081c08bc09500
[ 11.899] (II) AMDGPU(G0): 0140b3010101343a8018713830406c30
[ 11.899] (II) AMDGPU(G0): aa0058c11000001e000000fc00417274
[ 11.899] (II) AMDGPU(G0): 6973742031352e360a20000000ff0032
[ 11.899] (II) AMDGPU(G0): 303230303331360a20202020000000fd
[ 11.899] (II) AMDGPU(G0): 003b3d1f4611000a202020202020000a
[ 11.899] (II) AMDGPU(G0): Printing probed modes for output HDMI-A-1-2
[ 11.899] (II) AMDGPU(G0): Modeline "1920x1080"x60.0 149.00 1920 2028 2076 2200 1080 1090 1100 1128 +hsync +vsync (67.7 kHz eP)
[ 11.899] (II) AMDGPU(G0): Modeline "1680x1050"x61.0 149.72 1680 1784 1968 2256 1050 1051 1054 1088 -hsync +vsync (66.4 kHz)
[ 11.899] (II) AMDGPU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.899] (II) AMDGPU(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 11.899] (II) AMDGPU(G0): Modeline "1360x768"x59.9 84.96 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.8 kHz)
[ 11.899] (II) AMDGPU(G0): Modeline "1280x800"x60.0 149.00 1280 2028 2076 2200 800 1090 1100 1128 +hsync +vsync (67.7 kHz e)
[ 11.899] (II) AMDGPU(G0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11.899] (II) AMDGPU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.899] (II) AMDGPU(G0): Modeline "1152x648"x60.0 59.92 1152 1200 1320 1488 648 649 652 671 -hsync +vsync (40.3 kHz)
[ 11.899] (II) AMDGPU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.899] (II) AMDGPU(G0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.899] (II) AMDGPU(G0): EDID for output DisplayPort-1-2
[ 11.899] (II) AMDGPU(G0): EDID for output DisplayPort-1-3
[ 11.899] (II) AMDGPU(G0): EDID for output DisplayPort-1-4
[ 11.899] (II) AMDGPU(G0): mem size init: gart size :3cf24b000 vram size: s:1e054000 visible:1e054000
[ 11.899] (==) AMDGPU(G0): DPI set to (96, 96)
[ 11.899] (==) AMDGPU(G0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.899] (II) Loading sub module “ramdac”
[ 11.899] (II) LoadModule: “ramdac”
[ 11.899] (II) Module “ramdac” already built-in
[ 11.899] (II) UnloadModule: “modesetting”
[ 11.899] (II) Unloading modesetting
[ 11.900] (II) NVIDIA: Reserving 24576.00 MB of virtual memory for indirect memory
[ 11.900] (II) NVIDIA: access.
[ 11.911] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 11.911] (II) NVIDIA(0): may not be running or the “AcpidSocketPath” X
[ 11.911] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 11.911] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 11.911] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 11.911] (II) NVIDIA(0): details, please see the “ConnectToAcpid” and
[ 11.911] (II) NVIDIA(0): “AcpidSocketPath” X configuration options in Appendix B: X
[ 11.911] (II) NVIDIA(0): Config Options in the README.
[ 11.923] (II) NVIDIA(0): Setting mode “DFP-3:nvidia-auto-select,DFP-0:nvidia-auto-select”
[ 12.328] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 12.328] (==) NVIDIA(0): Backing store enabled
[ 12.328] (==) NVIDIA(0): Silken mouse enabled
[ 12.328] (==) NVIDIA(0): DPMS enabled
[ 12.328] (II) Loading sub module “dri2”
[ 12.328] (II) LoadModule: “dri2”
[ 12.328] (II) Module “dri2” already built-in
[ 12.328] (II) NVIDIA(0): [DRI2] Setup complete
[ 12.328] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 12.328] (II) AMDGPU(G0): [DRI2] Setup complete
[ 12.328] (II) AMDGPU(G0): [DRI2] DRI driver: radeonsi
[ 12.328] (II) AMDGPU(G0): [DRI2] VDPAU driver: radeonsi
[ 12.329] (II) AMDGPU(G0): Front buffer pitch: 4096 bytes
[ 12.329] (II) AMDGPU(G0): SYNC extension fences enabled
[ 12.329] (II) AMDGPU(G0): Present extension enabled
[ 12.329] (==) AMDGPU(G0): DRI3 enabled
[ 12.329] (==) AMDGPU(G0): Backing store enabled
[ 12.329] (II) AMDGPU(G0): Direct rendering enabled
[ 12.338] (II) AMDGPU(G0): Use GLAMOR acceleration.
[ 12.338] (II) AMDGPU(G0): Acceleration enabled
[ 12.338] (==) AMDGPU(G0): DPMS enabled
[ 12.338] (==) AMDGPU(G0): Silken mouse enabled
[ 12.348] (WW) AMDGPU(G0): Option “HotplugDriver” is not used
[ 12.348] (II) Initializing extension Generic Event Extension
[ 12.348] (II) Initializing extension SHAPE
[ 12.348] (II) Initializing extension MIT-SHM
[ 12.348] (II) Initializing extension XInputExtension
[ 12.348] (II) Initializing extension XTEST
[ 12.349] (II) Initializing extension BIG-REQUESTS
[ 12.349] (II) Initializing extension SYNC
[ 12.349] (II) Initializing extension XKEYBOARD
[ 12.349] (II) Initializing extension XC-MISC
[ 12.349] (II) Initializing extension SECURITY
[ 12.349] (II) Initializing extension XFIXES
[ 12.349] (II) Initializing extension RENDER
[ 12.349] (II) Initializing extension RANDR
[ 12.349] (II) Initializing extension COMPOSITE
[ 12.349] (II) Initializing extension DAMAGE
[ 12.349] (II) Initializing extension MIT-SCREEN-SAVER
[ 12.349] (II) Initializing extension DOUBLE-BUFFER
[ 12.349] (II) Initializing extension RECORD
[ 12.349] (II) Initializing extension DPMS
[ 12.349] (II) Initializing extension Present
[ 12.349] (II) Initializing extension DRI3
[ 12.350] (II) Initializing extension X-Resource
[ 12.350] (II) Initializing extension XVideo
[ 12.350] (II) Initializing extension XVideo-MotionCompensation
[ 12.350] (II) Initializing extension GLX
[ 12.350] (II) Initializing extension GLX
[ 12.350] (II) Indirect GLX disabled.
[ 12.350] (II) GLX: Another vendor is already registered for screen 0
[ 12.350] (II) Initializing extension XFree86-VidModeExtension
[ 12.350] (II) Initializing extension XFree86-DGA
[ 12.350] (II) Initializing extension XFree86-DRI
[ 12.350] (II) Initializing extension DRI2
[ 12.350] (II) Initializing extension NV-GLX
[ 12.350] (II) Initializing extension NV-CONTROL
[ 12.350] (II) Initializing extension XINERAMA
[ 12.460] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 12.460] () Power Button: Applying InputClass “devname”
[ 12.461] () Power Button: Applying InputClass “libinput keyboard catchall”
[ 12.461] () Power Button: Applying InputClass “system-keyboard”
[ 12.461] (II) LoadModule: “libinput”
[ 12.461] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 12.463] (II) Module libinput: vendor=“X.Org Foundation”
[ 12.463] compiled for 1.21.1.13, module version = 1.5.0
[ 12.463] Module class: X.Org XInput Driver
[ 12.463] ABI class: X.Org XInput driver, version 24.4
[ 12.463] (II) Using input driver ‘libinput’ for ‘Power Button’
[ 12.463] () Power Button: always reports core events
[ 12.463] () Option “Device” “/dev/input/event1”
[ 12.466] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 12.467] (II) event1 - Power Button: device is a keyboard
[ 12.467] (II) event1 - Power Button: device removed
[ 12.516] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1”
[ 12.516] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 6)
[ 12.516] () Option “xkb_layout” “us”
[ 12.516] (WW) Option “xkb_variant” requires a string value
[ 12.517] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 12.517] (II) event1 - Power Button: device is a keyboard
[ 12.517] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 12.517] () Video Bus: Applying InputClass “devname”
[ 12.517] () Video Bus: Applying InputClass “libinput keyboard catchall”
[ 12.517] () Video Bus: Applying InputClass “system-keyboard”
[ 12.517] (II) Using input driver ‘libinput’ for ‘Video Bus’
[ 12.517] () Video Bus: always reports core events
[ 12.517] () Option “Device” “/dev/input/event2”
[ 12.518] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 12.518] (II) event2 - Video Bus: device is a keyboard
[ 12.518] (II) event2 - Video Bus: device removed
[ 12.583] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:20/LNXVIDEO:00/input/input2/event2”
[ 12.583] (II) XINPUT: Adding extended input device “Video Bus” (type: KEYBOARD, id 7)
[ 12.583] () Option “xkb_layout” “us”
[ 12.583] (WW) Option “xkb_variant” requires a string value
[ 12.584] (II) event2 - Video Bus: is tagged by udev as: Keyboard
[ 12.584] (II) event2 - Video Bus: device is a keyboard
[ 12.584] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 12.584] () Power Button: Applying InputClass “devname”
[ 12.584] () Power Button: Applying InputClass “libinput keyboard catchall”
[ 12.584] () Power Button: Applying InputClass “system-keyboard”
[ 12.584] (II) Using input driver ‘libinput’ for ‘Power Button’
[ 12.584] () Power Button: always reports core events
[ 12.584] () Option “Device” “/dev/input/event0”
[ 12.585] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 12.585] (II) event0 - Power Button: device is a keyboard
[ 12.585] (II) event0 - Power Button: device removed
[ 12.613] () Option “config_info” “udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0”
[ 12.613] (II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD, id 8)
[ 12.613] () Option “xkb_layout” “us”
[ 12.613] (WW) Option “xkb_variant” requires a string value
[ 12.614] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 12.614] (II) event0 - Power Button: device is a keyboard
[ 12.614] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[ 12.615] () HDA NVidia HDMI/DP,pcm=3: Applying InputClass “devname”
[ 12.615] (II) Using input driver ‘libinput’ for ‘HDA NVidia HDMI/DP,pcm=3’
[ 12.615] () HDA NVidia HDMI/DP,pcm=3: always reports core events
[ 12.615] () Option “Device” “/dev/input/event19”
[ 12.615] (II) event19 - HDA NVidia HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 12.660] (II) event19 - not using input device ‘/dev/input/event19’.
[ 12.660] (EE) libinput: HDA NVidia HDMI/DP,pcm=3: Failed to create a device for /dev/input/event19
[ 12.660] (EE) PreInit returned 2 for “HDA NVidia HDMI/DP,pcm=3”
[ 12.660] (II) UnloadModule: “libinput”
[ 12.660] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20)
[ 12.660] () HDA NVidia HDMI/DP,pcm=7: Applying InputClass “devname”
[ 12.660] (II) Using input driver ‘libinput’ for ‘HDA NVidia HDMI/DP,pcm=7’
[ 12.660] () HDA NVidia HDMI/DP,pcm=7: always reports core events
[ 12.660] () Option “Device” “/dev/input/event20”
[ 12.661] (II) event20 - HDA NVidia HDMI/DP,pcm=7: is tagged by udev as: Switch
[ 12.713] (II) event20 - not using input device ‘/dev/input/event20’.
[ 12.713] (EE) libinput: HDA NVidia HDMI/DP,pcm=7: Failed to create a device for /dev/input/event20
[ 12.713] (EE) PreInit returned 2 for “HDA NVidia HDMI/DP,pcm=7”
[ 12.713] (II) UnloadModule: “libinput”
[ 12.713] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event23)
[ 12.713] () HDA NVidia HDMI/DP,pcm=8: Applying InputClass “devname”
[ 12.713] (II) Using input driver ‘libinput’ for ‘HDA NVidia HDMI/DP,pcm=8’
[ 12.713] () HDA NVidia HDMI/DP,pcm=8: always reports core events
[ 12.713] () Option “Device” “/dev/input/event23”
[ 12.714] (II) event23 - HDA NVidia HDMI/DP,pcm=8: is tagged by udev as: Switch
[ 12.767] (II) event23 - not using input device ‘/dev/input/event23’.
[ 12.767] (EE) libinput: HDA NVidia HDMI/DP,pcm=8: Failed to create a device for /dev/input/event23
[ 12.767] (EE) PreInit returned 2 for “HDA NVidia HDMI/DP,pcm=8”
[ 12.767] (II) UnloadModule: “libinput”
[ 12.767] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event24)
[ 12.767] () HDA NVidia HDMI/DP,pcm=9: Applying InputClass “devname”
[ 12.767] (II) Using input driver ‘libinput’ for ‘HDA NVidia HDMI/DP,pcm=9’
[ 12.767] () HDA NVidia HDMI/DP,pcm=9: always reports core events
[ 12.767] () Option “Device” “/dev/input/event24”
[ 12.768] (II) event24 - HDA NVidia HDMI/DP,pcm=9: is tagged by udev as: Switch
[ 12.820] (II) event24 - not using input device ‘/dev/input/event24’.
[ 12.820] (EE) libinput: HDA NVidia HDMI/DP,pcm=9: Failed to create a device for /dev/input/event24
[ 12.820] (EE) PreInit returned 2 for “HDA NVidia HDMI/DP,pcm=9”
[ 12.820] (II) UnloadModule: “libinput”
[ 12.820] (II) config/udev: Adding input device UGTABLET 15.6 inch PenDisplay Mouse (/dev/input/event5)
[ 12.820] () UGTABLET 15.6 inch PenDisplay Mouse: Applying InputClass “devname”
[ 12.820] () UGTABLET 15.6 inch PenDisplay Mouse: Applying InputClass “libinput pointer catchall”
[ 12.820] (II) Using input driver ‘libinput’ for ‘UGTABLET 15.6 inch PenDisplay Mouse’
[ 12.820] () UGTABLET 15.6 inch PenDisplay Mouse: always reports core events
[ 12.820] () Option “Device” “/dev/input/event5”
[ 12.821] (II) event5 - UGTABLET 15.6 inch PenDisplay Mouse: is tagged by udev as: Mouse
[ 12.821] (II) event5 - UGTABLET 15.6 inch PenDisplay Mouse: device is a pointer
[ 12.821] (II) event5 - UGTABLET 15.6 inch PenDisplay Mouse: device removed
[ 12.873] (II) libinput: UGTABLET 15.6 inch PenDisplay Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 12.873] (II) libinput: UGTABLET 15.6 inch PenDisplay Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 12.873] (II) libinput: UGTABLET 15.6 inch PenDisplay Mouse: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 12.873] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:02.1/0000:03:00.0/0000:04:0c.0/0000:0e:00.0/usb1/1-3/1-3:1.0/0003:28BD:091A.0005/input/input8/event5”
[ 12.873] (II) XINPUT: Adding extended input device “UGTABLET 15.6 inch PenDisplay Mouse” (type: MOUSE, id 9)
[ 12.873] () Option “AccelerationScheme” “none”
[ 12.873] () UGTABLET 15.6 inch PenDisplay Mouse: (accel) selected scheme none/0
[ 12.873] () UGTABLET 15.6 inch PenDisplay Mouse: (accel) acceleration factor: 2.000
[ 12.873] () UGTABLET 15.6 inch PenDisplay Mouse: (accel) acceleration threshold: 4
[ 12.874] (II) event5 - UGTABLET 15.6 inch PenDisplay Mouse: is tagged by udev as: Mouse
[ 12.874] (II) event5 - UGTABLET 15.6 inch PenDisplay Mouse: device is a pointer
[ 12.875] (II) config/udev: Adding input device UGTABLET 15.6 inch PenDisplay Mouse (/dev/input/mouse1)
[ 12.875] () UGTABLET 15.6 inch PenDisplay Mouse: Applying InputClass “devname”
[ 12.875] (II) Using input driver ‘libinput’ for ‘UGTABLET 15.6 inch PenDisplay Mouse’
[ 12.875] () UGTABLET 15.6 inch PenDisplay Mouse: always reports core events
[ 12.875] () Option “Device” “/dev/input/mouse1”
[ 12.920] (II) mouse1 - not using input device ‘/dev/input/mouse1’.
[ 12.920] (EE) libinput: UGTABLET 15.6 inch PenDisplay Mouse: Failed to create a device for /dev/input/mouse1
[ 12.920] (EE) PreInit returned 2 for “UGTABLET 15.6 inch PenDisplay Mouse”
[ 12.920] (II) UnloadModule: “libinput”
[ 12.921] (II) config/udev: Adding input device UGTABLET 15.6 inch PenDisplay Keyboard (/dev/input/event6)
[ 12.921] () UGTABLET 15.6 inch PenDisplay Keyboard: Applying InputClass “devname”
[ 12.921] () UGTABLET 15.6 inch PenDisplay Keyboard: Applying InputClass “libinput keyboard catchall”
[ 12.921] () UGTABLET 15.6 inch PenDisplay Keyboard: Applying InputClass “system-keyboard”
[ 12.921] (II) Using input driver ‘libinput’ for ‘UGTABLET 15.6 inch PenDisplay Keyboard’
[ 12.921] () UGTABLET 15.6 inch PenDisplay Keyboard: always reports core events
[ 12.921] () Option “Device” “/dev/input/event6”
[ 12.921] (II) event6 - UGTABLET 15.6 inch PenDisplay Keyboard: is tagged by udev as: Keyboard
[ 12.922] (II) event6 - UGTABLET 15.6 inch PenDisplay Keyboard: device is a keyboard
[ 12.922] (II) event6 - UGTABLET 15.6 inch PenDisplay Keyboard: device removed
[ 12.936] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:02.1/0000:03:00.0/0000:04:0c.0/0000:0e:00.0/usb1/1-3/1-3:1.0/0003:28BD:091A.0005/input/input9/event6”
[ 12.937] (II) XINPUT: Adding extended input device “UGTABLET 15.6 inch PenDisplay Keyboard” (type: KEYBOARD, id 10)
[ 12.937] () Option “xkb_layout” “us”
[ 12.937] (WW) Option “xkb_variant” requires a string value
[ 12.938] (II) event6 - UGTABLET 15.6 inch PenDisplay Keyboard: is tagged by udev as: Keyboard
[ 12.938] (II) event6 - UGTABLET 15.6 inch PenDisplay Keyboard: device is a keyboard
[ 12.938] (II) config/udev: Adding input device UGTABLET 15.6 inch PenDisplay Stylus (/dev/input/event7)
[ 12.938] () UGTABLET 15.6 inch PenDisplay Stylus: Applying InputClass “devname”
[ 12.938] () UGTABLET 15.6 inch PenDisplay Stylus: Applying InputClass “libinput tablet catchall”
[ 12.938] () UGTABLET 15.6 inch PenDisplay Stylus: Applying InputClass “XP-Pen 15.6 inch PenDisplay”
[ 12.938] (II) LoadModule: “wacom”
[ 12.938] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
[ 12.940] (II) Module wacom: vendor=“X.Org Foundation”
[ 12.940] compiled for 1.21.1.13, module version = 1.2.2
[ 12.940] Module class: X.Org XInput Driver
[ 12.940] ABI class: X.Org XInput driver, version 24.4
[ 12.940] (II) Build version: 1.2.2
[ 12.940] (II) wacom: Driver for Wacom graphics tablets: PenPartner, Graphire,
Graphire2 4x5, Graphire2 5x7, Graphire3 4x5, Graphire3 6x8,
Graphire4 4x5, Graphire4 6x8, BambooFun 4x5, BambooFun 6x8,
Bamboo1 Medium, Graphire4 6x8 BlueTooth, CTL-460, CTH-461, CTL-660,
CTL-461/S, Bamboo Touch, CTH-460/K, CTH-461/S, CTH-661/S1, CTH-461/L,
CTH-661/L, Intuos 4x5, Intuos 6x8, Intuos 9x12, Intuos 12x12,
Intuos 12x18, PTU600, PL400, PL500, PL600, PL600SX, PL550, PL800,
PL700, PL510, PL710, DTI520, DTF720, DTF720a, DTF521, DTU1931,
DTU2231, DTU1631, DTH1152, DTH1152, DTK2451, DTH2452, DTH2452,
Wacom One Pen Display 13, Intuos2 4x5, Intuos2 6x8, Intuos2 9x12,
Intuos2 12x12, Intuos2 12x18, Intuos2 6x8 , Volito, PenStation,
Volito2 4x5, Volito2 2x3, PenPartner2, Bamboo, Bamboo1, Bamboo1 4x6,
Bamboo1 5x8, Intuos3 4x5, Intuos3 6x8, Intuos3 9x12, Intuos3 12x12,
Intuos3 12x19, Intuos3 6x11, Intuos3 4x6, Intuos4 4x6, Intuos4 6x9,
Intuos4 8x13, Intuos4 12x19, Intuos4 WL USB Endpoint,
Intuos4 WL Bluetooth Endpoint, Intuos5 touch S, Intuos5 touch M,
Intuos5 touch L, Intuos5 S, Intuos5 M, Intuos Pro S, Intuos Pro M,
Intuos Pro L, Cintiq 21UX, Cintiq 20WSX, Cintiq 12WX, Cintiq 21UX2,
Cintiq 24HD, Cintiq 22HD, Cintiq 24HD touch (EMR digitizer),
Cintiq 13HD, DTK2241, DTH2242, Cintiq 22HDT, Cintiq 27QHDT,
Cintiq 27QHDT, Mobilestudio Pro 13, MobileStudio Pro 16,
MobileStudio Pro 13, MobileStudio Pro 16, Cintiq 13 FHD Pro,
Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq 13 FHD Pro,
Cintiq 16 UHD Pro, Cintiq Pro 24, Cintiq Pro 32, Cintiq Pro 24,
Mobilestudio Pro 13, MobileStudio Pro 16, MobileStudio Pro 13,
MobileStudio Pro 16, MobileStudio Pro 16, MobileStudio Pro 16,
TabletPC 0x90, TabletPC 0x93, TabletPC 0x97, TabletPC 0x9A,
CapPlus 0x9F, TabletPC 0xE2, TabletPC 0xE3, TabletPC 0xE5,
TabletPC 0xE6, TabletPC 0xEC, TabletPC 0xED, TabletPC 0xEF,
TabletPC 0x100, TabletPC 0x101, TabletPC 0x10D, TabletPC 0x116,
TabletPC 0x12C, TabletPC 0x4001, TabletPC 0x4004, TabletPC 0x5000,
TabletPC 0x5002, usb:172f:0024, usb:172f:0025, usb:172f:0026,
usb:172f:0027, usb:172f:0028, usb:172f:0030, usb:172f:0031,
usb:172f:0032, usb:172f:0033, usb:172f:0034, usb:172f:0035,
usb:172f:0036, usb:172f:0037, usb:172f:0038, usb:172f:0039,
usb:172f:0051, usb:172f:0052, usb:172f:0053, usb:172f:0054,
usb:172f:0055, usb:172f:0056, usb:172f:0057, usb:172f:0058,
usb:172f:0500, usb:172f:0501, usb:172f:0502, usb:172f:0503,
usb:1b96:0001, usb:17ef:6004
[ 12.940] (II) Using input driver ‘wacom’ for ‘UGTABLET 15.6 inch PenDisplay Stylus’
[ 12.940] () UGTABLET 15.6 inch PenDisplay Stylus: always reports core events
[ 12.940] () Option “Device” “/dev/input/event7”
[ 12.996] (II) wacom: UGTABLET 15.6 inch PenDisplay Stylus: type not specified, assuming ‘stylus’.
[ 12.997] (II) wacom: UGTABLET 15.6 inch PenDisplay Stylus: other types will be automatically added.
[ 12.997] () wacom: UGTABLET 15.6 inch PenDisplay Stylus stylus: Smooth panscrolling is enabled
[ 12.997] (–) wacom: UGTABLET 15.6 inch PenDisplay Stylus stylus: using pressure threshold of 851 for button 1
[ 12.997] () wacom: UGTABLET 15.6 inch PenDisplay Stylus stylus: panscroll is 0
[ 12.997] () wacom: UGTABLET 15.6 inch PenDisplay Stylus stylus: panscroll modified to 1313
[ 12.997] (–) wacom: UGTABLET 15.6 inch PenDisplay Stylus stylus: maxX=34419 maxY=19461 maxZ=8191 resX=100000 resY=101000 tilt=enabled
[ 12.997] (II) wacom: UGTABLET 15.6 inch PenDisplay Stylus stylus: hotplugging dependent devices.
[ 12.997] (II) wacom: UGTABLET 15.6 inch PenDisplay Stylus stylus: hotplugging completed.
[ 13.050] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:02.1/0000:03:00.0/0000:04:0c.0/0000:0e:00.0/usb1/1-3/1-3:1.1/0003:28BD:091A.0006/input/input10/event7”
[ 13.050] (II) XINPUT: Adding extended input device “UGTABLET 15.6 inch PenDisplay Stylus stylus” (type: STYLUS, id 11)
[ 13.050] () UGTABLET 15.6 inch PenDisplay Stylus stylus: (accel) keeping acceleration scheme 1
[ 13.050] () UGTABLET 15.6 inch PenDisplay Stylus stylus: (accel) acceleration profile 0
[ 13.050] () UGTABLET 15.6 inch PenDisplay Stylus stylus: (accel) acceleration factor: 2.000
[ 13.050] () UGTABLET 15.6 inch PenDisplay Stylus stylus: (accel) acceleration threshold: 4
[ 13.107] (II) config/udev: Adding input device UGTABLET 15.6 inch PenDisplay Stylus (/dev/input/mouse2)
[ 13.107] () UGTABLET 15.6 inch PenDisplay Stylus: Applying InputClass “devname”
[ 13.107] (II) Using input driver ‘libinput’ for ‘UGTABLET 15.6 inch PenDisplay Stylus’
[ 13.107] () UGTABLET 15.6 inch PenDisplay Stylus: always reports core events
[ 13.107] () Option “Device” “/dev/input/mouse2”
[ 13.160] (II) mouse2 - not using input device ‘/dev/input/mouse2’.
[ 13.160] (EE) libinput: UGTABLET 15.6 inch PenDisplay Stylus: Failed to create a device for /dev/input/mouse2
[ 13.160] (EE) PreInit returned 2 for “UGTABLET 15.6 inch PenDisplay Stylus”
[ 13.160] (II) UnloadModule: “libinput”
[ 13.160] (II) config/udev: Adding input device UGTABLET 15.6 inch PenDisplay (/dev/input/event8)
[ 13.160] () UGTABLET 15.6 inch PenDisplay: Applying InputClass “devname”
[ 13.160] (II) Using input driver ‘libinput’ for ‘UGTABLET 15.6 inch PenDisplay’
[ 13.160] () UGTABLET 15.6 inch PenDisplay: always reports core events
[ 13.160] () Option “Device” “/dev/input/event8”
[ 13.161] (II) event8 - UGTABLET 15.6 inch PenDisplay: not tagged as supported input device
[ 13.210] (II) event8 - not using input device ‘/dev/input/event8’.
[ 13.210] (EE) libinput: UGTABLET 15.6 inch PenDisplay: Failed to create a device for /dev/input/event8
[ 13.210] (EE) PreInit returned 2 for “UGTABLET 15.6 inch PenDisplay”
[ 13.210] (II) UnloadModule: “libinput”
[ 13.210] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event17)
[ 13.210] () HD-Audio Generic HDMI/DP,pcm=3: Applying InputClass “devname”
[ 13.210] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic HDMI/DP,pcm=3’
[ 13.210] () HD-Audio Generic HDMI/DP,pcm=3: always reports core events
[ 13.210] () Option “Device” “/dev/input/event17”
[ 13.211] (II) event17 - HD-Audio Generic HDMI/DP,pcm=3: is tagged by udev as: Switch
[ 13.243] (II) event17 - not using input device ‘/dev/input/event17’.
[ 13.243] (EE) libinput: HD-Audio Generic HDMI/DP,pcm=3: Failed to create a device for /dev/input/event17
[ 13.243] (EE) PreInit returned 2 for “HD-Audio Generic HDMI/DP,pcm=3”
[ 13.243] (II) UnloadModule: “libinput”
[ 13.243] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=7 (/dev/input/event18)
[ 13.243] () HD-Audio Generic HDMI/DP,pcm=7: Applying InputClass “devname”
[ 13.243] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic HDMI/DP,pcm=7’
[ 13.243] () HD-Audio Generic HDMI/DP,pcm=7: always reports core events
[ 13.243] () Option “Device” “/dev/input/event18”
[ 13.244] (II) event18 - HD-Audio Generic HDMI/DP,pcm=7: is tagged by udev as: Switch
[ 13.276] (II) event18 - not using input device ‘/dev/input/event18’.
[ 13.276] (EE) libinput: HD-Audio Generic HDMI/DP,pcm=7: Failed to create a device for /dev/input/event18
[ 13.276] (EE) PreInit returned 2 for “HD-Audio Generic HDMI/DP,pcm=7”
[ 13.276] (II) UnloadModule: “libinput”
[ 13.277] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=8 (/dev/input/event21)
[ 13.277] () HD-Audio Generic HDMI/DP,pcm=8: Applying InputClass “devname”
[ 13.277] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic HDMI/DP,pcm=8’
[ 13.277] () HD-Audio Generic HDMI/DP,pcm=8: always reports core events
[ 13.277] () Option “Device” “/dev/input/event21”
[ 13.277] (II) event21 - HD-Audio Generic HDMI/DP,pcm=8: is tagged by udev as: Switch
[ 13.343] (II) event21 - not using input device ‘/dev/input/event21’.
[ 13.343] (EE) libinput: HD-Audio Generic HDMI/DP,pcm=8: Failed to create a device for /dev/input/event21
[ 13.343] (EE) PreInit returned 2 for “HD-Audio Generic HDMI/DP,pcm=8”
[ 13.343] (II) UnloadModule: “libinput”
[ 13.344] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=9 (/dev/input/event22)
[ 13.344] () HD-Audio Generic HDMI/DP,pcm=9: Applying InputClass “devname”
[ 13.344] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic HDMI/DP,pcm=9’
[ 13.344] () HD-Audio Generic HDMI/DP,pcm=9: always reports core events
[ 13.344] () Option “Device” “/dev/input/event22”
[ 13.344] (II) event22 - HD-Audio Generic HDMI/DP,pcm=9: is tagged by udev as: Switch
[ 13.413] (II) event22 - not using input device ‘/dev/input/event22’.
[ 13.413] (EE) libinput: HD-Audio Generic HDMI/DP,pcm=9: Failed to create a device for /dev/input/event22
[ 13.413] (EE) PreInit returned 2 for “HD-Audio Generic HDMI/DP,pcm=9”
[ 13.413] (II) UnloadModule: “libinput”
[ 13.414] (II) config/udev: Adding input device Wacom Intuos Pro M Pen (/dev/input/event3)
[ 13.414] () Wacom Intuos Pro M Pen: Applying InputClass “devname”
[ 13.414] () Wacom Intuos Pro M Pen: Applying InputClass “libinput tablet catchall”
[ 13.414] () Wacom Intuos Pro M Pen: Applying InputClass “Wacom USB tablet class”
[ 13.414] () Wacom Intuos Pro M Pen: Applying InputClass “Wacom tablet class”
[ 13.414] (II) Using input driver ‘wacom’ for ‘Wacom Intuos Pro M Pen’
[ 13.414] () Wacom Intuos Pro M Pen: always reports core events
[ 13.414] () Option “Device” “/dev/input/event3”
[ 13.470] (II) wacom: Wacom Intuos Pro M Pen: type not specified, assuming ‘stylus’.
[ 13.470] (II) wacom: Wacom Intuos Pro M Pen: other types will be automatically added.
[ 13.470] () wacom: Wacom Intuos Pro M Pen stylus: Smooth panscrolling is enabled
[ 13.470] (–) wacom: Wacom Intuos Pro M Pen stylus: using pressure threshold of 851 for button 1
[ 13.470] () wacom: Wacom Intuos Pro M Pen stylus: panscroll is 0
[ 13.470] () wacom: Wacom Intuos Pro M Pen stylus: panscroll modified to 2600
[ 13.470] (–) wacom: Wacom Intuos Pro M Pen stylus: maxX=44800 maxY=29600 maxZ=8191 resX=200000 resY=200000 tilt=enabled
[ 13.470] (II) wacom: Wacom Intuos Pro M Pen stylus: hotplugging dependent devices.
[ 13.470] (II) wacom: Wacom Intuos Pro M Pen stylus: hotplugging completed.
[ 13.523] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.1/0000:10:00.3/usb3/3-1/3-1:1.0/0003:056A:0357.0001/input/input5/event3”
[ 13.523] (II) XINPUT: Adding extended input device “Wacom Intuos Pro M Pen stylus” (type: STYLUS, id 12)
[ 13.523] () Wacom Intuos Pro M Pen stylus: (accel) keeping acceleration scheme 1
[ 13.523] () Wacom Intuos Pro M Pen stylus: (accel) acceleration profile 0
[ 13.523] () Wacom Intuos Pro M Pen stylus: (accel) acceleration factor: 2.000
[ 13.523] () Wacom Intuos Pro M Pen stylus: (accel) acceleration threshold: 4
[ 13.580] (II) config/udev: Adding input device Wacom Intuos Pro M Pen (/dev/input/mouse0)
[ 13.581] () Wacom Intuos Pro M Pen: Applying InputClass “devname”
[ 13.581] (II) Using input driver ‘libinput’ for ‘Wacom Intuos Pro M Pen’
[ 13.581] () Wacom Intuos Pro M Pen: always reports core events
[ 13.581] () Option “Device” “/dev/input/mouse0”
[ 13.626] (II) mouse0 - not using input device ‘/dev/input/mouse0’.
[ 13.626] (EE) libinput: Wacom Intuos Pro M Pen: Failed to create a device for /dev/input/mouse0
[ 13.626] (EE) PreInit returned 2 for “Wacom Intuos Pro M Pen”
[ 13.626] (II) UnloadModule: “libinput”
[ 13.627] (II) config/udev: Adding input device Wacom Intuos Pro M Pad (/dev/input/event4)
[ 13.627] () Wacom Intuos Pro M Pad: Applying InputClass “devname”
[ 13.627] () Wacom Intuos Pro M Pad: Applying InputClass “libinput tablet catchall”
[ 13.627] () Wacom Intuos Pro M Pad: Applying InputClass “Wacom USB tablet class”
[ 13.627] () Wacom Intuos Pro M Pad: Applying InputClass “Wacom tablet class”
[ 13.627] (II) Using input driver ‘wacom’ for ‘Wacom Intuos Pro M Pad’
[ 13.627] () Wacom Intuos Pro M Pad: always reports core events
[ 13.627] () Option “Device” “/dev/input/event4”
[ 13.627] (II) wacom: Wacom Intuos Pro M Pad: type not specified, assuming ‘pad’.
[ 13.627] (II) wacom: Wacom Intuos Pro M Pad: other types will be automatically added.
[ 13.627] () wacom: Wacom Intuos Pro M Pad pad: Smooth panscrolling is enabled
[ 13.627] () wacom: Wacom Intuos Pro M Pad pad: panscroll is 0
[ 13.627] () wacom: Wacom Intuos Pro M Pad pad: panscroll modified to 1000
[ 13.627] (II) wacom: Wacom Intuos Pro M Pad pad: hotplugging dependent devices.
[ 13.627] (II) wacom: Wacom Intuos Pro M Pad pad: hotplugging completed.
[ 13.680] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.1/0000:10:00.3/usb3/3-1/3-1:1.0/0003:056A:0357.0001/input/input7/event4”
[ 13.680] (II) XINPUT: Adding extended input device “Wacom Intuos Pro M Pad pad” (type: PAD, id 13)
[ 13.680] () Wacom Intuos Pro M Pad pad: (accel) keeping acceleration scheme 1
[ 13.680] () Wacom Intuos Pro M Pad pad: (accel) acceleration profile 0
[ 13.680] () Wacom Intuos Pro M Pad pad: (accel) acceleration factor: 2.000
[ 13.680] () Wacom Intuos Pro M Pad pad: (accel) acceleration threshold: 4
[ 13.681] (II) config/udev: Adding input device Wacom Intuos Pro M Pad (/dev/input/js0)
[ 13.681] () Wacom Intuos Pro M Pad: Applying InputClass “devname”
[ 13.681] (II) Using input driver ‘libinput’ for ‘Wacom Intuos Pro M Pad’
[ 13.681] () Wacom Intuos Pro M Pad: always reports core events
[ 13.681] () Option “Device” “/dev/input/js0”
[ 13.723] (II) js0 - not using input device ‘/dev/input/js0’.
[ 13.723] (EE) libinput: Wacom Intuos Pro M Pad: Failed to create a device for /dev/input/js0
[ 13.723] (EE) PreInit returned 2 for “Wacom Intuos Pro M Pad”
[ 13.723] (II) UnloadModule: “libinput”
[ 13.724] (II) config/udev: Adding input device Wacom Intuos Pro M Finger (/dev/input/event9)
[ 13.724] () Wacom Intuos Pro M Finger: Applying InputClass “devname”
[ 13.724] () Wacom Intuos Pro M Finger: Applying InputClass “libinput touchpad catchall”
[ 13.724] () Wacom Intuos Pro M Finger: Applying InputClass “libinput tablet catchall”
[ 13.724] () Wacom Intuos Pro M Finger: Applying InputClass “Wacom USB tablet class”
[ 13.724] () Wacom Intuos Pro M Finger: Applying InputClass “Wacom USB touchpad class”
[ 13.724] () Wacom Intuos Pro M Finger: Applying InputClass “Wacom tablet class”
[ 13.724] () Wacom Intuos Pro M Finger: Applying InputClass “Wacom touchpad class”
[ 13.724] (II) Using input driver ‘wacom’ for ‘Wacom Intuos Pro M Finger’
[ 13.724] () Wacom Intuos Pro M Finger: always reports core events
[ 13.724] () Option “Device” “/dev/input/event9”
[ 13.780] (II) wacom: Wacom Intuos Pro M Finger: type not specified, assuming ‘touch’.
[ 13.780] (II) wacom: Wacom Intuos Pro M Finger: other types will be automatically added.
[ 13.780] () wacom: Wacom Intuos Pro M Finger touch: Smooth panscrolling is enabled
[ 13.780] () wacom: Wacom Intuos Pro M Finger touch: panscroll is 0
[ 13.780] () wacom: Wacom Intuos Pro M Finger touch: panscroll modified to 13
[ 13.780] (–) wacom: Wacom Intuos Pro M Finger touch: maxX=8960 maxY=5920 maxZ=0 resX=40000 resY=40000
[ 13.780] (II) wacom: Wacom Intuos Pro M Finger touch: hotplugging dependent devices.
[ 13.780] (II) wacom: Wacom Intuos Pro M Finger touch: hotplugging completed.
[ 13.813] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.1/0000:10:00.3/usb3/3-1/3-1:1.2/0003:056A:0357.0003/input/input13/event9”
[ 13.813] (II) XINPUT: Adding extended input device “Wacom Intuos Pro M Finger touch” (type: TOUCH, id 14)
[ 13.813] () Wacom Intuos Pro M Finger touch: (accel) keeping acceleration scheme 1
[ 13.813] () Wacom Intuos Pro M Finger touch: (accel) acceleration profile 0
[ 13.813] () Wacom Intuos Pro M Finger touch: (accel) acceleration factor: 2.000
[ 13.813] () Wacom Intuos Pro M Finger touch: (accel) acceleration threshold: 4
[ 13.870] (II) config/udev: Adding input device Wacom Intuos Pro M Finger (/dev/input/mouse3)
[ 13.870] () Wacom Intuos Pro M Finger: Applying InputClass “devname”
[ 13.870] (II) Using input driver ‘libinput’ for ‘Wacom Intuos Pro M Finger’
[ 13.870] () Wacom Intuos Pro M Finger: always reports core events
[ 13.870] () Option “Device” “/dev/input/mouse3”
[ 13.913] (II) mouse3 - not using input device ‘/dev/input/mouse3’.
[ 13.913] (EE) libinput: Wacom Intuos Pro M Finger: Failed to create a device for /dev/input/mouse3
[ 13.913] (EE) PreInit returned 2 for “Wacom Intuos Pro M Finger”
[ 13.913] (II) UnloadModule: “libinput”
[ 13.914] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event10)
[ 13.914] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “devname”
[ 13.914] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “libinput keyboard catchall”
[ 13.914] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “system-keyboard”
[ 13.914] (II) Using input driver ‘libinput’ for ‘Microsoft Natural® Ergonomic Keyboard 4000’
[ 13.914] () Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 13.914] () Option “Device” “/dev/input/event10”
[ 13.915] (II) event10 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 13.915] (II) event10 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 13.915] (II) event10 - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[ 13.930] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.1/0000:10:00.4/usb5/5-1/5-1:1.0/0003:045E:00DB.0002/input/input16/event10”
[ 13.930] (II) XINPUT: Adding extended input device “Microsoft Natural® Ergonomic Keyboard 4000” (type: KEYBOARD, id 15)
[ 13.930] () Option “xkb_layout” “us”
[ 13.930] (WW) Option “xkb_variant” requires a string value
[ 13.931] (II) event10 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 13.931] (II) event10 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 13.932] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event11)
[ 13.932] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “devname”
[ 13.932] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “libinput keyboard catchall”
[ 13.932] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “system-keyboard”
[ 13.932] (II) Using input driver ‘libinput’ for ‘Microsoft Natural® Ergonomic Keyboard 4000’
[ 13.932] () Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 13.932] () Option “Device” “/dev/input/event11”
[ 13.932] (II) event11 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 13.932] (II) event11 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 13.932] (II) event11 - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[ 13.946] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: needs a virtual subdevice
[ 13.947] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.1/0000:10:00.4/usb5/5-1/5-1:1.1/0003:045E:00DB.0004/input/input17/event11”
[ 13.947] (II) XINPUT: Adding extended input device “Microsoft Natural® Ergonomic Keyboard 4000” (type: MOUSE, id 16)
[ 13.947] () Option “AccelerationScheme” “none”
[ 13.947] () Microsoft Natural® Ergonomic Keyboard 4000: (accel) selected scheme none/0
[ 13.947] () Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[ 13.947] () Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[ 13.947] (II) event11 - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[ 13.948] (II) event11 - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[ 13.948] (II) config/udev: Adding input device HD-Audio Generic Rear Mic (/dev/input/event25)
[ 13.948] () HD-Audio Generic Rear Mic: Applying InputClass “devname”
[ 13.948] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic Rear Mic’
[ 13.948] () HD-Audio Generic Rear Mic: always reports core events
[ 13.948] () Option “Device” “/dev/input/event25”
[ 13.948] (II) event25 - HD-Audio Generic Rear Mic: is tagged by udev as: Switch
[ 13.980] (II) event25 - not using input device ‘/dev/input/event25’.
[ 13.980] (EE) libinput: HD-Audio Generic Rear Mic: Failed to create a device for /dev/input/event25
[ 13.980] (EE) PreInit returned 2 for “HD-Audio Generic Rear Mic”
[ 13.980] (II) UnloadModule: “libinput”
[ 13.980] (II) config/udev: Adding input device HD-Audio Generic Front Mic (/dev/input/event26)
[ 13.980] () HD-Audio Generic Front Mic: Applying InputClass “devname”
[ 13.980] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic Front Mic’
[ 13.980] () HD-Audio Generic Front Mic: always reports core events
[ 13.980] () Option “Device” “/dev/input/event26”
[ 13.981] (II) event26 - HD-Audio Generic Front Mic: is tagged by udev as: Switch
[ 14.013] (II) event26 - not using input device ‘/dev/input/event26’.
[ 14.013] (EE) libinput: HD-Audio Generic Front Mic: Failed to create a device for /dev/input/event26
[ 14.013] (EE) PreInit returned 2 for “HD-Audio Generic Front Mic”
[ 14.013] (II) UnloadModule: “libinput”
[ 14.013] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event27)
[ 14.013] () HD-Audio Generic Line: Applying InputClass “devname”
[ 14.013] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic Line’
[ 14.013] () HD-Audio Generic Line: always reports core events
[ 14.013] () Option “Device” “/dev/input/event27”
[ 14.014] (II) event27 - HD-Audio Generic Line: is tagged by udev as: Switch
[ 14.053] (II) event27 - not using input device ‘/dev/input/event27’.
[ 14.053] (EE) libinput: HD-Audio Generic Line: Failed to create a device for /dev/input/event27
[ 14.053] (EE) PreInit returned 2 for “HD-Audio Generic Line”
[ 14.053] (II) UnloadModule: “libinput”
[ 14.054] (II) config/udev: Adding input device HD-Audio Generic Line Out (/dev/input/event28)
[ 14.054] () HD-Audio Generic Line Out: Applying InputClass “devname”
[ 14.054] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic Line Out’
[ 14.054] () HD-Audio Generic Line Out: always reports core events
[ 14.054] () Option “Device” “/dev/input/event28”
[ 14.054] (II) event28 - HD-Audio Generic Line Out: is tagged by udev as: Switch
[ 14.086] (II) event28 - not using input device ‘/dev/input/event28’.
[ 14.087] (EE) libinput: HD-Audio Generic Line Out: Failed to create a device for /dev/input/event28
[ 14.087] (EE) PreInit returned 2 for “HD-Audio Generic Line Out”
[ 14.087] (II) UnloadModule: “libinput”
[ 14.087] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event29)
[ 14.087] () HD-Audio Generic Front Headphone: Applying InputClass “devname”
[ 14.087] (II) Using input driver ‘libinput’ for ‘HD-Audio Generic Front Headphone’
[ 14.087] () HD-Audio Generic Front Headphone: always reports core events
[ 14.087] () Option “Device” “/dev/input/event29”
[ 14.087] (II) event29 - HD-Audio Generic Front Headphone: is tagged by udev as: Switch
[ 14.120] (II) event29 - not using input device ‘/dev/input/event29’.
[ 14.120] (EE) libinput: HD-Audio Generic Front Headphone: Failed to create a device for /dev/input/event29
[ 14.120] (EE) PreInit returned 2 for “HD-Audio Generic Front Headphone”
[ 14.120] (II) UnloadModule: “libinput”
[ 14.120] (II) config/udev: Adding input device Sony PLAYSTATION(R)3 Controller (/dev/input/event15)
[ 14.120] () Sony PLAYSTATION(R)3 Controller: Applying InputClass “devname”
[ 14.120] (II) Using input driver ‘libinput’ for ‘Sony PLAYSTATION(R)3 Controller’
[ 14.120] () Sony PLAYSTATION(R)3 Controller: always reports core events
[ 14.120] () Option “Device” “/dev/input/event15”
[ 14.121] (II) event15 - Sony PLAYSTATION(R)3 Controller: is tagged by udev as: Joystick
[ 14.121] (II) event15 - Sony PLAYSTATION(R)3 Controller: device is a joystick or a gamepad, ignoring
[ 14.163] (II) event15 - not using input device ‘/dev/input/event15’.
[ 14.163] (EE) libinput: Sony PLAYSTATION(R)3 Controller: Failed to create a device for /dev/input/event15
[ 14.163] (EE) PreInit returned 2 for “Sony PLAYSTATION(R)3 Controller”
[ 14.163] (II) UnloadModule: “libinput”
[ 14.164] (II) config/udev: Adding input device Sony PLAYSTATION(R)3 Controller (/dev/input/js1)
[ 14.164] () Sony PLAYSTATION(R)3 Controller: Applying InputClass “devname”
[ 14.164] (II) Using input driver ‘libinput’ for ‘Sony PLAYSTATION(R)3 Controller’
[ 14.164] () Sony PLAYSTATION(R)3 Controller: always reports core events
[ 14.164] () Option “Device” “/dev/input/js1”
[ 14.196] (II) js1 - not using input device ‘/dev/input/js1’.
[ 14.196] (EE) libinput: Sony PLAYSTATION(R)3 Controller: Failed to create a device for /dev/input/js1
[ 14.197] (EE) PreInit returned 2 for “Sony PLAYSTATION(R)3 Controller”
[ 14.197] (II) UnloadModule: “libinput”
[ 14.197] (II) config/udev: Adding input device Sony PLAYSTATION(R)3 Controller Motion Sensors (/dev/input/event14)
[ 14.197] () Sony PLAYSTATION(R)3 Controller Motion Sensors: Applying InputClass “devname”
[ 14.197] (II) Using input driver ‘libinput’ for ‘Sony PLAYSTATION(R)3 Controller Motion Sensors’
[ 14.197] () Sony PLAYSTATION(R)3 Controller Motion Sensors: always reports core events
[ 14.197] () Option “Device” “/dev/input/event14”
[ 14.198] (II) event14 - Sony PLAYSTATION(R)3 Controller Motion Sensors: is tagged by udev as: Accelerometer
[ 14.198] (II) event14 - Sony PLAYSTATION(R)3 Controller Motion Sensors: device is an accelerometer, ignoring
[ 14.230] (II) event14 - not using input device ‘/dev/input/event14’.
[ 14.230] (EE) libinput: Sony PLAYSTATION(R)3 Controller Motion Sensors: Failed to create a device for /dev/input/event14
[ 14.230] (EE) PreInit returned 2 for “Sony PLAYSTATION(R)3 Controller Motion Sensors”
[ 14.230] (II) UnloadModule: “libinput”
[ 14.230] (II) config/udev: Adding input device Primax Kensington Eagle Trackball (/dev/input/event12)
[ 14.230] () Primax Kensington Eagle Trackball: Applying InputClass “devname”
[ 14.230] () Primax Kensington Eagle Trackball: Applying InputClass “libinput pointer catchall”
[ 14.231] (II) Using input driver ‘libinput’ for ‘Primax Kensington Eagle Trackball’
[ 14.231] () Primax Kensington Eagle Trackball: always reports core events
[ 14.231] () Option “Device” “/dev/input/event12”
[ 14.287] (II) event12 - Primax Kensington Eagle Trackball: is tagged by udev as: Mouse Trackball
[ 14.288] (II) event12 - Primax Kensington Eagle Trackball: device is a pointer
[ 14.288] (II) event12 - Primax Kensington Eagle Trackball: device removed
[ 14.320] (II) libinput: Primax Kensington Eagle Trackball: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 14.320] (II) libinput: Primax Kensington Eagle Trackball: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 14.320] (II) libinput: Primax Kensington Eagle Trackball: Step value 0 was provided, libinput Fallback acceleration function is used.
[ 14.320] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.3/0000:11:00.0/usb7/7-1/7-1.2/7-1.2:1.0/0003:047D:2048.000A/input/input18/event12”
[ 14.320] (II) XINPUT: Adding extended input device “Primax Kensington Eagle Trackball” (type: MOUSE, id 17)
[ 14.320] () Option “AccelerationScheme” “none”
[ 14.320] () Primax Kensington Eagle Trackball: (accel) selected scheme none/0
[ 14.320] () Primax Kensington Eagle Trackball: (accel) acceleration factor: 2.000
[ 14.320] () Primax Kensington Eagle Trackball: (accel) acceleration threshold: 4
[ 14.377] (II) event12 - Primax Kensington Eagle Trackball: is tagged by udev as: Mouse Trackball
[ 14.378] (II) event12 - Primax Kensington Eagle Trackball: device is a pointer
[ 14.378] (II) config/udev: Adding input device Primax Kensington Eagle Trackball (/dev/input/mouse4)
[ 14.378] () Primax Kensington Eagle Trackball: Applying InputClass “devname”
[ 14.378] (II) Using input driver ‘libinput’ for ‘Primax Kensington Eagle Trackball’
[ 14.378] () Primax Kensington Eagle Trackball: always reports core events
[ 14.378] () Option “Device” “/dev/input/mouse4”
[ 14.426] (II) mouse4 - not using input device ‘/dev/input/mouse4’.
[ 14.426] (EE) libinput: Primax Kensington Eagle Trackball: Failed to create a device for /dev/input/mouse4
[ 14.427] (EE) PreInit returned 2 for “Primax Kensington Eagle Trackball”
[ 14.427] (II) UnloadModule: “libinput”
[ 14.427] (II) config/udev: Adding input device Generic USB-C Audio (/dev/input/event13)
[ 14.427] () Generic USB-C Audio: Applying InputClass “devname”
[ 14.427] () Generic USB-C Audio: Applying InputClass “libinput keyboard catchall”
[ 14.427] () Generic USB-C Audio: Applying InputClass “system-keyboard”
[ 14.427] (II) Using input driver ‘libinput’ for ‘Generic USB-C Audio’
[ 14.427] () Generic USB-C Audio: always reports core events
[ 14.427] () Option “Device” “/dev/input/event13”
[ 14.428] (II) event13 - Generic USB-C Audio: is tagged by udev as: Keyboard
[ 14.428] (II) event13 - Generic USB-C Audio: device is a keyboard
[ 14.428] (II) event13 - Generic USB-C Audio: device removed
[ 14.473] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.3/0000:11:00.0/usb7/7-1/7-1.3/7-1.3:1.3/0003:001F:0B21.000C/input/input19/event13”
[ 14.473] (II) XINPUT: Adding extended input device “Generic USB-C Audio” (type: KEYBOARD, id 18)
[ 14.473] () Option “xkb_layout” “us”
[ 14.473] (WW) Option “xkb_variant” requires a string value
[ 14.474] (II) event13 - Generic USB-C Audio: is tagged by udev as: Keyboard
[ 14.474] (II) event13 - Generic USB-C Audio: device is a keyboard
[ 14.475] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[ 14.475] () PC Speaker: Applying InputClass “devname”
[ 14.475] (II) Using input driver ‘libinput’ for ‘PC Speaker’
[ 14.475] () PC Speaker: always reports core events
[ 14.475] () Option “Device” “/dev/input/event16”
[ 14.475] (II) event16 - PC Speaker: not tagged as supported input device
[ 14.506] (II) event16 - not using input device ‘/dev/input/event16’.
[ 14.506] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event16
[ 14.507] (EE) PreInit returned 2 for “PC Speaker”
[ 14.507] (II) UnloadModule: “libinput”
[ 14.511] () UGTABLET 15.6 inch PenDisplay Stylus eraser: Applying InputClass “devname”
[ 14.511] () UGTABLET 15.6 inch PenDisplay Stylus eraser: Applying InputClass “libinput tablet catchall”
[ 14.511] () UGTABLET 15.6 inch PenDisplay Stylus eraser: Applying InputClass “XP-Pen 15.6 inch PenDisplay”
[ 14.511] (II) Using input driver ‘wacom’ for ‘UGTABLET 15.6 inch PenDisplay Stylus eraser’
[ 14.511] () UGTABLET 15.6 inch PenDisplay Stylus eraser: always reports core events
[ 14.511] () Option “Device” “/dev/input/event7”
[ 14.511] () Option “Type” “eraser”
[ 14.511] () wacom: UGTABLET 15.6 inch PenDisplay Stylus eraser: Smooth panscrolling is enabled
[ 14.511] () wacom: UGTABLET 15.6 inch PenDisplay Stylus eraser: panscroll is 1313
[ 14.511] () wacom: UGTABLET 15.6 inch PenDisplay Stylus eraser: panscroll modified to 1313
[ 14.511] (–) wacom: UGTABLET 15.6 inch PenDisplay Stylus eraser: maxX=34419 maxY=19461 maxZ=8191 resX=100000 resY=101000 tilt=enabled
[ 14.536] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:02.1/0000:03:00.0/0000:04:0c.0/0000:0e:00.0/usb1/1-3/1-3:1.1/0003:28BD:091A.0006/input/input10/event7”
[ 14.536] (II) XINPUT: Adding extended input device “UGTABLET 15.6 inch PenDisplay Stylus eraser” (type: ERASER, id 19)
[ 14.536] () UGTABLET 15.6 inch PenDisplay Stylus eraser: (accel) keeping acceleration scheme 1
[ 14.536] () UGTABLET 15.6 inch PenDisplay Stylus eraser: (accel) acceleration profile 0
[ 14.536] () UGTABLET 15.6 inch PenDisplay Stylus eraser: (accel) acceleration factor: 2.000
[ 14.536] () UGTABLET 15.6 inch PenDisplay Stylus eraser: (accel) acceleration threshold: 4
[ 14.536] () Wacom Intuos Pro M Pen eraser: Applying InputClass “devname”
[ 14.536] () Wacom Intuos Pro M Pen eraser: Applying InputClass “libinput tablet catchall”
[ 14.537] () Wacom Intuos Pro M Pen eraser: Applying InputClass “Wacom USB tablet class”
[ 14.537] () Wacom Intuos Pro M Pen eraser: Applying InputClass “Wacom tablet class”
[ 14.537] (II) Using input driver ‘wacom’ for ‘Wacom Intuos Pro M Pen eraser’
[ 14.537] () Wacom Intuos Pro M Pen eraser: always reports core events
[ 14.537] () Option “Device” “/dev/input/event3”
[ 14.537] () Option “Type” “eraser”
[ 14.537] () wacom: Wacom Intuos Pro M Pen eraser: Smooth panscrolling is enabled
[ 14.537] () wacom: Wacom Intuos Pro M Pen eraser: panscroll is 2600
[ 14.537] () wacom: Wacom Intuos Pro M Pen eraser: panscroll modified to 2600
[ 14.537] (–) wacom: Wacom Intuos Pro M Pen eraser: maxX=44800 maxY=29600 maxZ=8191 resX=200000 resY=200000 tilt=enabled
[ 14.563] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.1/0000:10:00.3/usb3/3-1/3-1:1.0/0003:056A:0357.0001/input/input5/event3”
[ 14.563] (II) XINPUT: Adding extended input device “Wacom Intuos Pro M Pen eraser” (type: ERASER, id 20)
[ 14.563] () Wacom Intuos Pro M Pen eraser: (accel) keeping acceleration scheme 1
[ 14.563] () Wacom Intuos Pro M Pen eraser: (accel) acceleration profile 0
[ 14.563] () Wacom Intuos Pro M Pen eraser: (accel) acceleration factor: 2.000
[ 14.563] () Wacom Intuos Pro M Pen eraser: (accel) acceleration threshold: 4
[ 14.563] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “devname”
[ 14.563] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “libinput keyboard catchall”
[ 14.563] () Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass “system-keyboard”
[ 14.563] (II) Using input driver ‘libinput’ for ‘Microsoft Natural® Ergonomic Keyboard 4000’
[ 14.563] () Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[ 14.563] () Option “Device” “/dev/input/event11”
[ 14.563] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: is a virtual subdevice
[ 14.563] () Option “config_info” “udev:/sys/devices/pci0000:00/0000:00:08.1/0000:10:00.4/usb5/5-1/5-1:1.1/0003:045E:00DB.0004/input/input17/event11”
[ 14.563] (II) XINPUT: Adding extended input device “Microsoft Natural® Ergonomic Keyboard 4000” (type: KEYBOARD, id 21)
[ 14.563] (**) Option “xkb_layout” “us”
[ 14.563] (WW) Option “xkb_variant” requires a string value
[ 19.739] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): connected
[ 19.739] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): Internal TMDS
[ 19.739] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): 600.0 MHz maximum pixel clock
[ 19.739] (–) NVIDIA(GPU-0):
[ 19.740] (–) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.740] (–) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 19.740] (–) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[ 19.740] (–) NVIDIA(GPU-0):
[ 19.740] (–) NVIDIA(GPU-0): DFP-2: disconnected
[ 19.740] (–) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 19.740] (–) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 19.740] (–) NVIDIA(GPU-0):
[ 19.785] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): connected
[ 19.785] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): Internal TMDS
[ 19.785] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): 600.0 MHz maximum pixel clock
[ 19.785] (–) NVIDIA(GPU-0):
[ 19.785] (–) NVIDIA(GPU-0): DFP-4: disconnected
[ 19.785] (–) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 19.785] (–) NVIDIA(GPU-0): DFP-4: 2670.0 MHz maximum pixel clock
[ 19.785] (–) NVIDIA(GPU-0):
[ 19.785] (–) NVIDIA(GPU-0): DFP-5: disconnected
[ 19.785] (–) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 19.785] (–) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[ 19.785] (–) NVIDIA(GPU-0):
[ 19.831] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): connected
[ 19.831] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): Internal TMDS
[ 19.831] (–) NVIDIA(GPU-0): DELL S2409W (DFP-0): 600.0 MHz maximum pixel clock
[ 19.831] (–) NVIDIA(GPU-0):
[ 19.831] (–) NVIDIA(GPU-0): DFP-1: disconnected
[ 19.831] (–) NVIDIA(GPU-0): DFP-1: Internal DisplayPort
[ 19.831] (–) NVIDIA(GPU-0): DFP-1: 2670.0 MHz maximum pixel clock
[ 19.831] (–) NVIDIA(GPU-0):
[ 19.831] (–) NVIDIA(GPU-0): DFP-2: disconnected
[ 19.831] (–) NVIDIA(GPU-0): DFP-2: Internal TMDS
[ 19.831] (–) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 19.831] (–) NVIDIA(GPU-0):
[ 19.876] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): connected
[ 19.876] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): Internal TMDS
[ 19.876] (–) NVIDIA(GPU-0): DELL ST2010 (DFP-3): 600.0 MHz maximum pixel clock
[ 19.876] (–) NVIDIA(GPU-0):
[ 19.876] (–) NVIDIA(GPU-0): DFP-4: disconnected
[ 19.876] (–) NVIDIA(GPU-0): DFP-4: Internal DisplayPort
[ 19.876] (–) NVIDIA(GPU-0): DFP-4: 2670.0 MHz maximum pixel clock
[ 19.876] (–) NVIDIA(GPU-0):
[ 19.876] (–) NVIDIA(GPU-0): DFP-5: disconnected
[ 19.877] (–) NVIDIA(GPU-0): DFP-5: Internal TMDS
[ 19.877] (–) NVIDIA(GPU-0): DFP-5: 165.0 MHz maximum pixel clock
[ 19.877] (–) NVIDIA(GPU-0):
[ 19.933] (II) NVIDIA(0): Setting mode “HDMI-1: nvidia-auto-select @1600x900 +0+0 {ViewPortIn=1600x900, ViewPortOut=1600x900+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}”
[ 19.981] (II) NVIDIA(0): Setting mode “HDMI-1: nvidia-auto-select @1600x900 +3840+0 {ViewPortIn=1600x900, ViewPortOut=1600x900+0+0}, HDMI-0: nvidia-auto-select @1920x1080 +1920+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}”
[ 20.031] randr: falling back to unsynchronized pixmap sharing
I have seen other issues with XP pen, nvidia drivers and Endeavour OS, but these both are not happening on my system. The tablet display works fine, it draws with pen pressure and the calibration is correct. It just randomly crashes when I even have it plugged in. I use the libwacom tablet driver, not the xp pen proprietary driver and connect it to my computer using this method.
My system details:
Nvidia RTX 3060
Proprietary nvidia driver
Kernel 6.11.7-arch1-1