Hi, i’m sort of a newbie here.
Yesterday i did a update (sudo pacman -Syyu), and after rebooting, i have no longer wifi.
I connect to wifi via a TP-Link TL WN822N(EU) antenna, which uses rtl-8192eu driver (rtl8192eu-dkms 5.6.4.r293.gf2fc8af-1 installed).
I tried changing to lts kernel, after reading this post . After doing so, i can boot on lts and wifi works properly, but i don’t have nvidia drivers installed and screen resolution is horrible.
So here i’m stuck: no wifi drivers in kernel 6.7 ; no graphic drivers in lts kernel. I’m not sure how to continue, as i really don´t know if i should try and install nvidia on lts and use it; or maybe it’s better to install wifi drivers in 6.7. I really don’t know what implies to use a lts kernel. What would you recommend?
Here is the output of
inxi -Fz
inxi -Fz
System:
Kernel: 6.7.0-arch3-1 arch: x86_64 bits: 64 Desktop: KDE Plasma v: 5.27.10
Distro: EndeavourOS
Machine:
Type: Desktop Mobo: Micro-Star model: H310M PRO-VDH (MS-7B29) v: 1.0
serial: UEFI-[Legacy]: American Megatrends v: 1.70
date: 03/28/2019
CPU:
Info: 6-core model: Intel Core i5-8400 bits: 64 type: MCP cache:
L2: 1.5 MiB
Speed (MHz): avg: 800 min/max: 800/4000 cores: 1: 800 2: 800 3: 800
4: 800 5: 800 6: 800
Graphics:
Device-1: NVIDIA GP107 [GeForce GTX 1050] driver: nvidia v: 545.29.06
Device-2: Microdia Integrated Camera driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.10 driver: X:
loaded: modesetting,nvidia gpu: nvidia resolution: 1: 1920x1080~60Hz 2: N/A
API: EGL v: 1.5 drivers: kms_swrast,nvidia,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 545.29.06
renderer: NVIDIA GeForce GTX 1050/PCIe/SSE2
API: Vulkan v: 1.3.274 drivers: nvidia surfaces: xcb,xlib
Audio:
Device-1: Intel Cannon Lake PCH cAVS driver: snd_hda_intel
Device-2: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel
API: ALSA v: k6.7.0-arch3-1 status: kernel-api
Server-1: PipeWire v: 1.0.1 status: active
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp2s0 state: down mac:
IF-ID-1: enp0s20f0u9 state: unknown speed: -1 duplex: half mac:
Bluetooth:
Device-1: Samsung Galaxy series misc. (tethering mode) driver: rndis_host
type: USB
Drives:
Local Storage: total: 1.58 TiB used: 255.16 GiB (15.7%)
ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-08WN4A0
size: 931.51 GiB
ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
ID-3: /dev/sdc vendor: Kingston model: SA400S37240G size: 223.57 GiB
Partition:
ID-1: / size: 72.25 GiB used: 23.54 GiB (32.6%) fs: ext4 dev: /dev/sdb4
ID-2: /home size: 76.35 GiB used: 41.48 GiB (54.3%) fs: ext4
dev: /dev/sdb2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 37.0 C pch: 53.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 205 Uptime: 13m Memory: total: 8 GiB available: 7.69 GiB
used: 4.19 GiB (54.4%) Shell: Bash inxi: 3.3.31
inxi -Fz on LTS
inxi -Fz
System:
Kernel: 6.6.11-2-lts arch: x86_64 bits: 64 Desktop: KDE Plasma
v: 5.27.10 Distro: EndeavourOS
Machine:
Type: Desktop Mobo: Micro-Star model: H310M PRO-VDH (MS-7B29) v: 1.0
serial: UEFI-[Legacy]: American Megatrends v: 1.70
date: 03/28/2019
CPU:
Info: 6-core model: Intel Core i5-8400 bits: 64 type: MCP cache:
L2: 1.5 MiB
Speed (MHz): avg: 800 min/max: 800/4000 cores: 1: 800 2: 800 3: 800
4: 800 5: 800 6: 800
Graphics:
Device-1: NVIDIA GP107 [GeForce GTX 1050] driver: N/A
Device-2: Microdia Integrated Camera driver: uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.10 driver: X: loaded: modesetting
gpu: N/A resolution: 640x480~60Hz
API: EGL v: 1.5 drivers: kms_swrast,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.5 vendor: mesa v: 23.3.3-arch1.1 renderer: llvmpipe
(LLVM 16.0.6 256 bits)
API: Vulkan Message: No Vulkan data available.
Audio:
Device-1: Intel Cannon Lake PCH cAVS driver: snd_hda_intel
Device-2: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel
API: ALSA v: k6.6.11-2-lts status: kernel-api
Server-1: PipeWire v: 1.0.1 status: active
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
driver: r8169
IF: enp2s0 state: down mac:
Device-2: TP-Link TL-WN822N Version 4 RTL8192EU driver: rtl8192eu
type: USB
IF: wlan0 state: up mac:
IF-ID-1: enp0s20f0u9 state: unknown speed: -1 duplex: half
mac:
Bluetooth:
Device-1: Samsung Galaxy series misc. (tethering mode)
driver: rndis_host type: USB
Drives:
Local Storage: total: 1.58 TiB used: 255.13 GiB (15.7%)
ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-08WN4A0
size: 931.51 GiB
ID-2: /dev/sdb vendor: Samsung model: SSD 860 EVO 500GB
size: 465.76 GiB
ID-3: /dev/sdc vendor: Kingston model: SA400S37240G size: 223.57 GiB
Partition:
ID-1: / size: 72.25 GiB used: 23.53 GiB (32.6%) fs: ext4 dev: /dev/sdb4
ID-2: /home size: 76.35 GiB used: 41.46 GiB (54.3%) fs: ext4
dev: /dev/sdb2
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 41.0 C pch: 53.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 189 Uptime: 0m Memory: total: 8 GiB available: 7.7 GiB
used: 1.53 GiB (19.9%) Shell: Bash inxi: 3.3.31
As you can see, on LTS i have:
Device-2: TP-Link TL-WN822N Version 4 RTL8192EU driver: rtl8192eu
type: USB
IF: wlan0 state: up mac:
IF-ID-1: enp0s20f0u9 state: unknown speed: -1 duplex: half
mac:
and on 6.7 i don´t.
Thanks for your help!