Replace partition installer option crashes it

On checking out Cassini by installation on a new Laptop, the installer crashes when clicking anywhere in the window, if replace partition is selected. Any chance to reproduce?

I tested that option quite a lot and never saw that behaviour.

If you can reproduce it consistently, please let us know how so we can look into it.

Yes, it is reproducible and happens on an MSI Laptop with recent Firmware and BIOS updates

We need to know exactly how to reproduce it.

Does the installer write a log file? If so, I am happy to upload it. I did nothing unusual.

~/endeavour-install.log

inside livesession users home…

Hardware info would help too:
inxi -Fxxc0z | eos-sendlog

1 Like

Thanks, I will upload this information sometime during the week.

1 Like
endeavour-install.txt

########## /home/liveuser/endeavour-install.log by eos-install-mode-run-calamares
########## Started (UTC): 01/03/2023 02:31:27 PM
########## Install mode: online
########## ISO version: 2022.12.17
########## Calamares version:
########## inxi:
CPU:
Info: 8-core model: AMD Ryzen 7 5700U with Radeon Graphics bits: 64 type: MT MCP cache: L2: 4 MiB
Speed (MHz): avg: 599 min/max: 400/4372 cores: 1: 1242 2: 400 3: 400 4: 400 5: 400 6: 987
7: 400 8: 400 9: 400 10: 400 11: 986 12: 400 13: 987 14: 986 15: 400 16: 400
Memory:
RAM: total: 14.99 GiB used: 2.08 GiB (13.9%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
Graphics:
Device-1: AMD Lucienne vendor: Micro-Star MSI driver: amdgpu v: kernel arch: GCN-5.1 code: Vega-2
process: TSMC n7 (7nm) built: 2018-21 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s ports: active: eDP-1 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 04:00.0
chip-ID: 1002:164c class-ID: 0300 temp: 15.0 C
Device-2: Acer HD Webcam type: USB driver: uvcvideo bus-ID: 1-4:2 chip-ID: 5986:211c
class-ID: 0e02
Display: server: X.Org v: 21.1.5 compositor: xfwm v: 4.18.0 driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 mapped: eDP model: AU Optronics 0x2e8d built: 2019 res: 1920x1080 hz: 60
dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: OpenGL v: 4.6 Mesa 22.3.1 renderer: AMD Radeon Graphics (renoir LLVM 14.0.6 DRM 3.48
6.0.12-arch1-1) direct render: Yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel modules: wl pcie: gen: 2 speed: 5 GT/s
lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlan0 state: down mac:
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152 bus-ID: 2-1:2
chip-ID: 0bda:8153 class-ID: 0000 serial:
IF: enp4s0f3u1 state: up speed: 1000 Mbps duplex: full mac:

>>> Preliminary log before starting calamares:

==> eos-welcome: info: setting timezone to ‘Europe/Berlin’
==> hotfix-start.bash: info: hotfixes after ISO 2022.12.17
==> hotfix-start.bash: info: skip installing package(s): ipw2100-fw ipw2200-fw
==> hotfix-start.bash: info: no hotfixes for ISO version 2022.12.17.
==> Hotfixes definition file from https://gitlab.com/endeavouros-filemirror/ISO-hotfixes/-/raw/main/hotfix-start.bash executed.
==> File settings.conf updated.

<<< End of preliminary log.

15:31:30 [6]: Calamares::Settings::Settings(const QString&, bool)
Using Calamares settings file at “/etc/calamares/settings.conf”
15:31:30 [6]: void Logger::setupLogfile()
Using log file: “/root/.cache/calamares/session.log”
15:31:30 [6]: void CalamaresApplication::init()
Calamares version: 3.3.0-alpha3
… languages: (“ar”, “as”, “ast”, “az”, “az_AZ”, “be”, “bg”, “bn”, “ca”, “ca@valencia”, “cs_CZ”, “da”, “de”, “el”, “en”, “en_GB”, “es”, “es_MX”, “et”, “eu”, “fa”, “fi_FI”, “fr”, “fur”, “gl”, “he”, “hi”, “hr”, “hu”, “id”, “is”, “it_IT”, “ja”, “ko”, “lt”, “ml”, “mr”, “nb”, “nl”, “oc”, “pl”, “pt_BR”, “pt_PT”, “ro”, “ru”, “si”, “sk”, “sl”, “sq”, “sr”, “sr@latin”, “sv”, “tg”, “th”, “tr_TR”, “uk”, “vi”, “zh_CN”, “zh_TW”)
15:31:30 [6]: bool CalamaresUtils::initQmlModulesDir()
Using Calamares QML directory “/usr/share/calamares/qml”
15:31:30 [6]: Calamares::Branding::Branding(const QString&, QObject*)
Using Calamares branding file at “/etc/calamares/branding/endeavouros/branding.desc”
15:31:30 [6]: Calamares::Branding::Branding(const QString&, QObject*)
Loaded branding component “endeavouros”
… Loaded QRC translation “tz_” “en_US”
… Loaded QRC translation “calamares_” “en_US”
… STARTUP: initSettings, initQmlPath, initBranding done
… STARTUP: initModuleManager: module init started
15:31:30 [6]: void Calamares::ModuleManager::doInit()
Found 47 modules
15:31:30 [6]: void CalamaresApplication::initView()
STARTUP: initModuleManager: all modules init done
15:31:30 [6]: void CalamaresApplication::initView()
STARTUP: initJobQueue done
15:31:30 [6]: CalamaresWindow::CalamaresWindow(QWidget*)
Available desktop QSize(1920, 1046) minimum size QSize(1024, 520)
… Proposed window size: 1215 715
15:31:30 [6]: void CalamaresApplication::initView()
STARTUP: CalamaresWindow created; loadModules started
15:31:30 [6]: void Config::initLanguages()
Trying to match locale “en_US”
15:31:30 [6]: void Config::initLanguages()
Trying to match locale QLocale(English, Latin, United States)
15:31:30 [6]: void Config::setLocaleIndex(int)
Index 14 Selected locale “en”
… Loading “calamares-endeavouros_en” from “/etc/calamares/branding/endeavouros/lang”
… Branding no translation for “en” using default (en)
… Loaded QRC translation “tz_” “en”
… Loaded QRC translation “calamares_” “en”
15:31:31 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “welcome@online” loading complete.
15:31:31 [6]: QStringList loadLocales(const QString&)
Loading locales from “/usr/share/i18n/SUPPORTED”
… Read 492 lines
… After filtering 317 lines
15:31:31 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “locale@locale” loading complete.
15:31:31 [6]: QStringList CalamaresUtils::GeoIP::getElementTexts(const QByteArray&, const QString&)
GeoIP found 1 elements
15:31:31 [6]: KeyboardModelsModel::KeyboardModelsModel(QObject*)
Loaded 189 keyboard models
15:31:31 [6]: KeyboardPage::KeyboardPage(Config*, QWidget*)
Variants now total= 0 selected= -1
… Loaded QRC translation “kb_” “en”
15:31:31 [6]: void Config::detectCurrentKeyboardLayout()
(“pc”, “us”, “inet(evdev)"”)
15:31:31 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “keyboard@keyboard” loading complete.
15:31:31 [6]: void fillModel(PackageListModel*, const QVariantList&)
Loading PackageChooser model items from config
… Loaded PackageChooser with 10 entries.
15:31:32 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “packagechooser@packagechooser” loading complete.
15:31:32 [6]: void Config::setConfigurationMap(const QVariantMap&)
Loading netinstall from 1 alternate sources.
15:31:32 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “netinstall@netinstall” loading complete.
15:31:32 [6]: virtual void Config::setConfigurationMap(const QVariantMap&)
Using module ID “packagechooserq@packagechooserq”
15:31:32 [2]: virtual void Calamares::QmlViewStep::setConfigurationMap(const QVariantMap&)
WARNING: Bad QML search mode set for “packagechooserq@packagechooserq”
15:31:32 [6]: QString CalamaresUtils::searchQmlFile(QmlSearch, const QString&, const Calamares::ModuleSystem::InstanceKey&)
Looking for QML for “packagechooserq@packagechooserq”
… Looking at QML file “/etc/calamares/branding/endeavouros/packagechooserq@packagechooserq.qml”
… Looking at QML file “/etc/calamares/branding/endeavouros/packagechooserq.qml”
… Looking at QML file “:/packagechooserq@packagechooserq.qml”
… Looking at QML file “:/packagechooserq.qml”
15:31:32 [6]: virtual void Calamares::QmlViewStep::setConfigurationMap(const QVariantMap&)
QmlViewStep “packagechooserq@packagechooserq” loading “qrc:/packagechooserq.qml”
15:31:32 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “packagechooserq@packagechooserq” loading complete.
15:31:32 [6]: CalamaresUtils::Partition::InternalManager::InternalManager()
KPMCore backend starting …
15:31:32 [6]: Loaded backend plugin: “pmsfdiskbackendplugin”
… Backend @0x561e68405360 “pmsfdiskbackendplugin” “1”
15:31:32 [2]: virtual void PartitionViewStep::setConfigurationMap(const QVariantMap&)
WARNING: Partition-module setting defaultPartitionTableType is unset, will use gpt for efi or msdos for bios
15:31:32 [2]: QString PartUtils::canonicalFilesystemName(const QString&, FileSystem::Type*)
WARNING: Filesystem “unknown” not found, using ext4
15:31:32 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “partition@partition” loading complete.
… minLength set to 1
15:31:32 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “users@users” loading complete.
15:31:32 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “summary@summary” loading complete.
15:31:32 [6]: void Calamares::ModuleManager::loadModules()
Module “partition@partition” already loaded.
15:31:32 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
QML import paths:
“/usr/share/calamares/qml”
“/usr/bin”
“qrc:/qt-project.org/imports”
“/usr/lib/qt/qml”
15:31:32 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
QML load on startup, API 2.
15:31:32 [2]: QThread::setPriority: Cannot set priority, thread is not running
15:31:32 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “shellprocess@initialize_pacman” loading complete.
15:31:32 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “machineid@machineid” loading complete.
15:31:32 [6]: void Calamares::ModuleManager::loadModules()
Module “locale@locale” already loaded.
15:31:32 [6]: void Calamares::ModuleManager::loadModules()
Module “keyboard@keyboard” already loaded.
15:31:32 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “userpkglist@userpkglist” loading complete.
15:31:32 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “luksbootkeyfile@luksbootkeyfile” loading complete.
15:31:32 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “dracutlukscfg@dracutlukscfg” loading complete.
15:31:32 [6]: void Calamares::ModuleManager::loadModules()
Module “users@users” already loaded.
15:31:33 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “shellprocess@removeucode” loading complete.
15:31:33 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “preservefiles@preservefiles” loading complete.
15:31:33 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “shellprocess@copyfiles” loading complete.
15:31:33 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “umount@umount” loading complete.
15:31:33 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “finished@finished” loading complete.
15:31:33 [6]: void Config::xkbApply()
xkbmap selection changed to: “us” - “”
15:31:33 [6]: setGeoIP(Config*, const QVariantMap&)::<lambda()>
GeoIP result for welcome= “DE”
15:31:33 [6]: void Config::setLocaleIndex(int)
Index 12 Selected locale “de”
… Loading “calamares-endeavouros_de” from “/etc/calamares/branding/endeavouros/lang”
… Branding no translation for “de” using default (en)
… No translation for “tz_” “de” using default (en)
… Loaded QRC translation “calamares_” “de”
15:31:33 [6]: void LoaderQueue::fetch(const QUrl&)
NetInstall loading groups from QUrl(“file:///etc/calamares/modules/netinstall.yaml”)
15:31:33 [6]: void CalamaresApplication::initViewSteps()
STARTUP: loadModules for all modules done
15:31:33 [6]: void Calamares::ModuleManager::checkRequirements()
Checking module requirements …
15:31:33 [6]: void CalamaresApplication::initViewSteps()
STARTUP: Window now visible and ProgressTreeView populated
… 11 view steps loaded.
… No translation for “kb_” “de” using default (en)
15:31:33 [6]: void LoaderQueue::dataArrived()
NetInstall group data received 13721 bytes from QUrl(“file:///etc/calamares/modules/netinstall.yaml”)
… No translation for “kb_” “de” using default (en)
15:31:33 [6]: bool GeneralRequirements::checkHasPower()
A battery exists, checking for mains power.
15:31:33 [6]: void Calamares::QmlViewStep::loadComplete()
QML component “qrc:/packagechooserq.qml” QQmlComponent::Ready
… QML component complete “qrc:/packagechooserq.qml” creating object
15:31:33 [6]: void Calamares::SlideshowQML::loadQmlV2Complete()
QML component complete, API 2
15:31:33 [6]: getting temp failed for “/dev/nvme0n1” : Success
15:31:33 [6]: getting powered on time failed for “/dev/nvme0n1” : Success
15:31:33 [6]: getting power cycles failed for “/dev/nvme0n1” : Success
… Loading “/etc/calamares/branding/endeavouros/show.qml”
15:31:33 [2]: unknown file system type “” on “/dev/nvme0n1p2”
15:31:33 [6]: 31973119 15545791 4096
15:31:33 [6]: 230399 58856 4096
15:31:33 [6]: 4486911 195108 4096
15:31:33 [6]: 12898815 11798148 4096
15:31:33 [6]: Calamares::RequirementsList GeneralRequirements::checkRequirements()
GeneralRequirements output:
storage : 5905580032
enoughStorage : true
RAM : 1503238553
enoughRam : true
hasPower : true
hasInternet : true
isRoot : true
15:31:33 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
Got 6 requirement results from “welcome”
15:31:34 [6]: smartctl initialization failed for “/dev/sda” : No such file or directory
15:31:34 [6]: error during smart output parsing for “/dev/sda” : Success
15:31:34 [6]: QList<Device*> PartUtils::getDevices(DeviceType)
Removing unsuitable devices: 2 candidates.
… Running (“blkid”, “/dev/nvme0n1”)
… Running (“blkid”, “/dev/nvme0n1p1”)
… Running (“blkid”, “/dev/nvme0n1p2”)
… Running (“blkid”, “/dev/nvme0n1p3”)
… Running (“blkid”, “/dev/nvme0n1p6”)
… Running (“blkid”, “/dev/nvme0n1p9”)
… Running (“blkid”, “/dev/nvme0n1p7”)
… Running (“blkid”, “”)
… Target cmd: (“blkid”, “”) Exit code: 2 (no output)
… Running (“blkid”, “/dev/nvme0n1p11”)
… Running (“blkid”, “/dev/nvme0n1p12”)
… Running (“blkid”, “/dev/nvme0n1p13”)
… Running (“blkid”, “/dev/nvme0n1p14”)
… Running (“blkid”, “”)
… Target cmd: (“blkid”, “”) Exit code: 2 (no output)
… Running (“blkid”, “/dev/nvme0n1p8”)
… Running (“blkid”, “/dev/nvme0n1p4”)
… Running (“blkid”, “/dev/nvme0n1p5”)
… Running (“blkid”, “/dev/sda”)
… Removing device with iso9660 filesystem (probably a CD) on it “/dev/sda”
… there are 1 devices left.
15:31:34 [6]: void PartitionCoreModule::doInit()
LIST OF DETECTED DEVICES:
… node capacity name prettyName
… “/dev/nvme0n1” 512105932800 DevName$9eaef848 DevNamePretty$f21f15ba
… 1 devices detected.
15:31:34 [1]: OsproberEntryList PartUtils::runOsprober(DeviceModel*)
ERROR: os-prober cannot start.
15:31:34 [6]: OsproberEntryList PartUtils::runOsprober(DeviceModel*)
os-prober gave no output.
15:31:34 [6]: void PartitionCoreModule::scanForEfiSystemPartitions()
system is EFI and new EFI system partition has been found.
15:31:34 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
Got 1 requirement results from “partition”
15:31:34 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
15:31:34 [6]: void ChoicePage::updateDeviceStatePreview()
Updating partitioning state widgets.
15:31:34 [6]: void ChoicePage::setupActions()
Setting up actions for “/dev/nvme0n1” with 0 entries.
… Can not resize “/dev/nvme0n1p1” , filesystem “fat32” does not support resize.
… Checking if “/dev/nvme0n1p1” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 314572800 “(0GiB)”
… Can not resize “/dev/nvme0n1p2” , filesystem “unknown” does not support resize.
… Checking if “/dev/nvme0n1p2” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 134217728 “(0GiB)”
… Partition “/dev/nvme0n1p3” authorized for resize + autopartition install.
… contains resizable “/dev/nvme0n1p3”
… Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
… contains replaceable “/dev/nvme0n1p3”
… Partition “/dev/nvme0n1p6” authorized for resize + autopartition install.
… contains resizable “/dev/nvme0n1p6”
… Checking if “/dev/nvme0n1p6” can be replaced.
… Partition “/dev/nvme0n1p6” authorized for replace install.
… contains replaceable “/dev/nvme0n1p6”
… NO, insufficient storage
Required storage B: 8589934592 “(8GiB)”
Available storage B: 1024458752 “(0GiB)” for “/dev/nvme0n1p9” length: 2000896 sectorsUsed: 0 fsType: “linuxswap”
… Checking if “/dev/nvme0n1p9” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1024458752 “(0GiB)”
… Partition “/dev/nvme0n1p7” authorized for resize + autopartition install.
… contains resizable “/dev/nvme0n1p7”
… Checking if “/dev/nvme0n1p7” can be replaced.
… Partition “/dev/nvme0n1p7” authorized for replace install.
… contains replaceable “/dev/nvme0n1p7”
… Can not resize “/dev/nvme0n1” , filesystem “unknown” does not support resize.
… Checking if “/dev/nvme0n1” can be replaced.
… Partition “/dev/nvme0n1” authorized for replace install.
… contains replaceable “unallocated”
… NO, insufficient storage
Required storage B: 8589934592 “(8GiB)”
Available storage B: 882438144 “(0GiB)” for “/dev/nvme0n1p11” length: 2097152 sectorsUsed: 373640 fsType: “ext4”
… Checking if “/dev/nvme0n1p11” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1073741824 “(1GiB)”
… Partition “/dev/nvme0n1p12” authorized for resize + autopartition install.
… contains resizable “/dev/nvme0n1p12”
… Checking if “/dev/nvme0n1p12” can be replaced.
… Partition “/dev/nvme0n1p12” authorized for replace install.
… contains replaceable “/dev/nvme0n1p12”
… NO, insufficient storage
Required storage B: 8589934592 “(8GiB)”
Available storage B: 4216324096 “(3GiB)” for “/dev/nvme0n1p13” length: 8235008 sectorsUsed: 0 fsType: “linuxswap”
… Checking if “/dev/nvme0n1p13” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 4216324096 “(3GiB)”
… Can not resize “/dev/nvme0n1p14” , filesystem “xfs” does not support resize.
… Checking if “/dev/nvme0n1p14” can be replaced.
… Partition “/dev/nvme0n1p14” authorized for replace install.
… contains replaceable “/dev/nvme0n1p14”
… Can not resize “/dev/nvme0n1” , filesystem “unknown” does not support resize.
… Checking if “/dev/nvme0n1” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 12582912 “(0GiB)”
… Partition “/dev/nvme0n1p8” authorized for resize + autopartition install.
… contains resizable “/dev/nvme0n1p8”
… Checking if “/dev/nvme0n1p8” can be replaced.
… Partition “/dev/nvme0n1p8” authorized for replace install.
… contains replaceable “/dev/nvme0n1p8”
… NO, insufficient storage
Required storage B: 8589934592 “(8GiB)”
Available storage B: 241078272 “(0GiB)” for “/dev/nvme0n1p4” length: 1843200 sectorsUsed: 1372344 fsType: “ntfs”
… Checking if “/dev/nvme0n1p4” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 943718400 “(0GiB)”
… NO, insufficient storage
Required storage B: 8589934592 “(8GiB)”
Available storage B: 799166464 “(0GiB)” for “/dev/nvme0n1p5” length: 35895296 sectorsUsed: 34334424 fsType: “ntfs”
… Checking if “/dev/nvme0n1p5” can be replaced.
… Partition “/dev/nvme0n1p5” authorized for replace install.
… contains replaceable “/dev/nvme0n1p5”
15:31:34 [6]: ChoicePage::setupActions()::<lambda()>
Setting texts for 0 osprober entries
15:31:34 [6]: void ChoicePage::continueApplyDeviceChoice()
Previous device -1 new device 0
15:31:34 [6]: void ChoicePage::applyActionChoice(InstallChoice)
Prev -1 InstallChoice Config::NoChoice “none”
15:31:34 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
15:31:34 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
Updating partitioning preview widgets.
15:31:34 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
15:31:34 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
15:31:34 [6]: void Calamares::RequirementsChecker::finished()
All requirements have been checked.
15:31:34 [6]: void Calamares::RequirementsModel::describe() const
Requirements model has 7 items
… requirement 0 “storage” satisfied? true mandatory? false
… requirement 1 “ram” satisfied? true mandatory? true
… requirement 2 “power” satisfied? true mandatory? false
… requirement 3 “internet” satisfied? true mandatory? true
… requirement 4 “root” satisfied? true mandatory? false
… requirement 5 “screen” satisfied? true mandatory? false
… requirement 6 “partitions” satisfied? true mandatory? true
15:31:38 [6]: void Config::setLocaleIndex(int)
Index 14 Selected locale “en”
… Loading “calamares-endeavouros_en” from “/etc/calamares/branding/endeavouros/lang”
… Branding no translation for “en” using default (en)
… Loaded QRC translation “tz_” “en”
… Loaded QRC translation “calamares_” “en”
… Loaded QRC translation “kb_” “en”
15:31:38 [6]: ChoicePage::setupActions()::<lambda()>
Setting texts for 0 osprober entries
15:31:42 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping “en” in “DE” to locale.
… Got best match for “en” as “en_ZW.UTF-8”
… Got best match for “en_DE” as “en_IN”
… Got best match for “en_US” as “en_US.UTF-8”
15:31:42 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping “en” in “DE” to locale.
… Got best match for “en” as “en_ZW.UTF-8”
… Got best match for “en_DE” as “en_IN”
… Got best match for “en_US” as “en_US.UTF-8”
15:31:42 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping “en” in “DE” to locale.
… Got best match for “en” as “en_ZW.UTF-8”
… Got best match for “en_DE” as “en_IN”
… Got best match for “en_US” as “en_US.UTF-8”
15:31:44 [6]: void Config::guessLocaleKeyboardLayout()
Got locale language “en_US.UTF-8”
… looking for locale part “US”
… matched “us”
15:31:44 [6]: void guessLayout(const QStringList&, KeyboardLayoutModel*, KeyboardVariantsModel*)
Next level: “en”
15:31:53 [6]: void Config::updateGlobalStorage(const QStringList&) const
QPair(“packagechooser”,“packagechooser”) groups to select in netinstall (“GNOME-Desktop”)
15:32:03 [6]: QML Component (default slideshow) Next slide
15:32:06 [6]: bool additions(Calamares::GlobalStorage*, const QString&, const QVariantList&, const QVariantList&)
Existing package operations length 0
… 170 critical packages.
… 4 non-critical packages.
15:32:06 [6]: void CalamaresUtils::callQmlFunction(QQuickItem*, const char*)
QML “onActivate()” is missing.
15:32:08 [6]: virtual void PartitionViewStep::onActivate()
The bootloader is “systemd-boot”
15:32:08 [6]: virtual void PartitionViewStep::onActivate()
The efi location is “/efi”
15:32:08 [6]: virtual void PartitionViewStep::onActivate()
The bootloader is “systemd-boot”
15:32:08 [6]: virtual void PartitionViewStep::onActivate()
The efi location is “/efi”
15:32:10 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
15:32:10 [6]: void ChoicePage::applyActionChoice(InstallChoice)
Prev -1 InstallChoice Config::Replace “replace”
15:32:10 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
15:32:10 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
Updating partitioning preview widgets.
15:32:10 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
15:32:10 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
15:32:33 [6]: QML Component (default slideshow) Next slide
15:33:03 [6]: QML Component (default slideshow) Next slide
15:33:33 [6]: QML Component (default slideshow) Next slide
15:34:03 [6]: QML Component (default slideshow) Next slide
15:34:33 [6]: QML Component (default slideshow) Next slide
15:35:03 [6]: QML Component (default slideshow) Next slide
15:35:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p7” can be replaced.
… Partition “/dev/nvme0n1p7” authorized for replace install.
15:35:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p7” can be replaced.
… Partition “/dev/nvme0n1p7” authorized for replace install.
15:35:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1” can be replaced.
… Partition “/dev/nvme0n1” authorized for replace install.
15:35:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1” can be replaced.
… Partition “/dev/nvme0n1” authorized for replace install.
15:35:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1” can be replaced.
… Partition “/dev/nvme0n1” authorized for replace install.
15:35:07 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1” can be replaced.
… Partition “/dev/nvme0n1” authorized for replace install.

This forum apparently does not allow me to upload text files. Please find the further info at https://0x0.st/oRWA.txt.

Please let me delete the two above posts when inspected. Thank you.

PM exist too :wink:

1 Like

i do not see any hint on the log… and the hardware should work too… nothing exotic…

   15:32:06 [6]: void CalamaresUtils::callQmlFunction(QQuickItem*, const char*)
    QML “onActivate()” is missing.

is showing while bootloader section… but i do not think thats related …

Yeah, that is normal.

the strange thing about the log is that the output is doubled all over the log?

    Checking if “/dev/nvme0n1p7” can be replaced.
    … Partition “/dev/nvme0n1p7” authorized for replace install.
    15:35:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
    Checking if “/dev/nvme0n1p7” can be replaced.
    … Partition “/dev/nvme0n1p7” authorized for replace install.
    15:35:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)

@ng0177 how do you create the install media usb ?

I have always used Fedora mediawriter. Of course, it could dd it but mediawriter restores the stick with one click which is conveniant.

yes Fedora Media Writer should be fine…

Any chance that this problem might be fixed in the upcoming release? In the meantime, I have to live w/o EOS on that latop.

Unfortunately, there is no way for us to fix it if we can’t reproduce it.

You could use the manual partitioning option.

1 Like

Have you tried using gparted first on that partition to remove it and then either use manual partitiong or see if it works.

1 Like

I tried all of that but it has zero impact. I am guessing, it might be a graphics library issue given this MSI AMD/Radeon based Laptop. E.g. when right clicking on the partition to be replaced, the installer also crashes.

In order to get to the bottom of it, I tried the same procedure on a second (gaming) laptop which also has the MSI AMD/Radeon hardware - same issue!

Manual partitioning is a workaround but needs thinking wrt systemd-boot. Therefore, I prefer to wait for now.