Grub and/or Kernel missing after Update - repeated

milkytwix · January 27, 2024, 7:05pm

So, this has happened now multiple times. Like almost every 4th Kernel-Update, guestimating here. Last step I did was going LTS, and this solved it, at least that was what I thought. Until today - new Kernel Update, again booting into UEFI. I can solve this quite fine with archrooting and reinstall Kernel (ignoring the message that Kernel is already installed), but this requieres booting into the ISO via ventoy, copypasting my mounting stuff and then rebooting (below for reference what I really do) - highly annoying…
What can be the issue here? I do not interrupt the update in any way, I just perform a yay, answer everything that makes sense with “yes”, do not exclude packages, and reboot via “reboot” in the same Konsolewindow that I used for “yay” itself. What am I missing here? What logs or information should I provide?

What I do to solve it:

sudo mount -o subvol=@ UUID=178ba18b-3faa-4b38-b7e5-5b0f5d2f285c /mnt
sudo mount -o subvol=@log UUID=178ba18b-3faa-4b38-b7e5-5b0f5d2f285c /mnt/var/log
sudo mount -o subvol=@cache UUID=178ba18b-3faa-4b38-b7e5-5b0f5d2f285c /mnt/var/cache
sudo mount -o subvol=@home UUID=178ba18b-3faa-4b38-b7e5-5b0f5d2f285c /mnt/home
sudo mount UUID=BDEB-C54C /mnt/boot/efi
sudo arch-chroot /mnt
sudo pacman -S linux
sudo grub-mkconfig -o /boot/grub/grub.cfg
exit
reboot

System information::

inxi -Fza
System:
  Kernel: 6.6.14-1-lts arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
    root=UUID=178ba18b-3faa-4b38-b7e5-5b0f5d2f285c rw rootflags=subvol=@
    nowatchdog nvme_load=YES loglevel=3 zswap.enabled=0 amd-pstate=active
  Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.12 wm: kwin_x11 vt: 2
    dm: SDDM Distro: EndeavourOS base: Arch Linux
Machine:
  Type: Desktop Mobo: Micro-Star model: MAG X570 TOMAHAWK WIFI (MS-7C84)
    v: 1.0 serial: <superuser required> UEFI: American Megatrends LLC. v: 1.B0
    date: 08/11/2022
CPU:
  Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
    level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
    model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
  Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
    L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB
    L3: 64 MiB desc: 2x32 MiB
  Speed (MHz): avg: 835 high: 3600 min/max: 550/5084 scaling:
    driver: amd-pstate-epp governor: powersave cores: 1: 550 2: 3599 3: 550
    4: 550 5: 550 6: 550 7: 550 8: 550 9: 550 10: 550 11: 3599 12: 550 13: 550
    14: 550 15: 3600 16: 550 17: 550 18: 550 19: 550 20: 550 21: 550 22: 550
    23: 550 24: 550 25: 550 26: 550 27: 550 28: 550 29: 550 30: 550 31: 550
    32: 550 bogomips: 217680
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: gather_data_sampling status: Not affected
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data status: Not affected
  Type: retbleed status: Not affected
  Type: spec_rstack_overflow status: Vulnerable: Safe RET, no microcode
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Navi 21 [Radeon RX 6800/6800 XT / 6900 XT] driver: amdgpu
    v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22
    pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1,DP-2
    empty: DP-3,HDMI-A-1 bus-ID: 2f:00.0 chip-ID: 1002:73bf class-ID: 0300
  Display: x11 server: X.Org v: 21.1.11 compositor: kwin_x11 driver: X:
    loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa
    dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 5120x1440 s-dpi: 96 s-size: 1354x381mm (53.31x15.00")
    s-diag: 1407mm (55.38")
  Monitor-1: DP-1 mapped: DisplayPort-0 pos: primary,left
    model: LG (GoldStar) ULTRAGEAR serial: <filter> built: 2023 res: 2560x1440
    hz: 165 dpi: 93 gamma: 1.2 size: 697x392mm (27.44x15.43")
    diag: 690mm (27.2") ratio: 16:9 modes: max: 2560x1440 min: 640x350
  Monitor-2: DP-2 mapped: DisplayPort-1 pos: right
    model: LG (GoldStar) ULTRAGEAR serial: <filter> built: 2023 res: 2560x1440
    hz: 165 dpi: 93 gamma: 1.2 size: 697x392mm (27.44x15.43")
    diag: 690mm (27.2") ratio: 16:9 modes: max: 2560x1440 min: 640x350
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
    inactive: gbm,wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.3.4-arch1.2
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 6800 XT (radeonsi
    navi21 LLVM 16.0.6 DRM 3.54 6.6.14-1-lts) device-ID: 1002:73bf
    memory: 15.62 GiB unified: no
  API: Vulkan v: 1.3.276 layers: N/A device: 0 type: discrete-gpu name: AMD
    Radeon RX 6800 XT (RADV NAVI21) driver: mesa radv v: 23.3.4-arch1.2
    device-ID: 1002:73bf surfaces: xcb,xlib
Audio:
  Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
    gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 2f:00.1 chip-ID: 1002:ab28
    class-ID: 0403
  Device-2: Thesycon System & Consulting GmbH DX3 Pro+ driver: snd-usb-audio
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-2:3
    chip-ID: 152a:8750 class-ID: fe01
  API: ALSA v: k6.6.14-1-lts status: kernel-api
    tools: alsactl,alsamixer,amixer
  Server-1: PipeWire v: 1.0.1 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Mellanox MT27500 Family [ConnectX-3] driver: mlx4_core v: 4.0-0
    pcie: gen: 3 speed: 8 GT/s lanes: 4 port: N/A bus-ID: 24:00.0
    chip-ID: 15b3:1003 class-ID: 0200
  IF: enp36s0 state: up speed: 10000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-4:7 chip-ID: 8087:0029
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 5.2 lmp-v: 11
    status: discoverable: no pairing: no
Drives:
  Local Storage: total: 18.66 TiB used: 8.54 TiB (45.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Seagate model: FireCuda 530
    ZP2000GM30013 size: 1.82 TiB block-size: physical: 512 B logical: 512 B
    speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: SU6SM001
    temp: 40.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Seagate model: FireCuda 530
    ZP2000GM30013 size: 1.82 TiB block-size: physical: 512 B logical: 512 B
    speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: SU6SM001
    temp: 26.9 C scheme: GPT
  ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 PRO 512GB
    size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 1B6Q scheme: GPT
  ID-4: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST16000NM001G-2KK103
    size: 14.55 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 7200 serial: <filter> fw-rev: SN03 scheme: GPT
Partition:
  ID-1: / raw-size: 1.82 TiB size: 1.82 TiB (100.00%) used: 771.23 GiB (41.4%)
    fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:3
  ID-2: /boot/efi raw-size: 1000 MiB size: 998 MiB (99.80%)
    used: 576 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:2
  ID-3: /home raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
    used: 771.23 GiB (41.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:3
  ID-4: /var/log raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
    used: 771.23 GiB (41.4%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:3
Swap:
  Kernel: swappiness: 180 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 16 GiB used: 20.2 MiB (0.1%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 32 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 56.0 C mobo: 34.0 C gpu: amdgpu temp: 51.0 C
    mem: 48.0 C
  Fan Speeds (rpm): fan-1: 0 fan-2: 419 fan-3: 361 fan-4: 0 fan-5: 0
    fan-6: 0 fan-7: 0 gpu: amdgpu fan: 0
Info:
  Processes: 547 Uptime: 3h 7m wakeups: 0 Memory: total: 64 GiB note: est.
  available: 62.72 GiB used: 10.3 GiB (16.4%) Init: systemd v: 255
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
  pm: pacman pkgs: 1333 libs: 413 tools: yay pm: flatpak pkgs: 0 Shell: Bash
  v: 5.2.26 running-in: konsole inxi: 3.3.31

Hard Disk Layout:

lsblk -o +uuid,name,model
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
                                                 UUID                                 NAME      MODEL
sda           8:0    0 476,9G  0 disk                                                 sda       Samsung SSD 860 PRO 512GB
└─sda1        8:1    0 476,9G  0 part /Data      fc6a43bb-ec9a-4f23-94e9-eff7cf5f250c sda1      
sdb           8:16   0  14,6T  0 disk                                                 sdb       ST16000NM001G-2KK103
├─sdb1        8:17   0   3,8T  0 part /Misc      e0e1bff4-1418-4574-b3da-823cfe4fc668 sdb1      
├─sdb2        8:18   0   9,3T  0 part /Stuff     545f70e0-5226-4d38-862e-cf159fbf6e7f sdb2      
└─sdb3        8:19   0   1,5T  0 part /backup    8c7a3875-418a-49de-8a6e-47a480315c22 sdb3      
zram0       254:0    0    16G  0 disk [SWAP]                                          zram0     
nvme0n1     259:0    0   1,8T  0 disk                                                 nvme0n1   Seagate FireCuda 530 ZP2000GM30013
├─nvme0n1p1 259:2    0  1000M  0 part /boot/efi  BDEB-C54C                            nvme0n1p1 
└─nvme0n1p2 259:3    0   1,8T  0 part /var/log   178ba18b-3faa-4b38-b7e5-5b0f5d2f285c nvme0n1p2 
                                      /var/cache                                                
                                      /home                                                     
                                      /Virtual                                                  
                                      /                                                         
nvme1n1     259:1    0   1,8T  0 disk                                                 nvme1n1   Seagate FireCuda 530 ZP2000GM30013
├─nvme1n1p1 259:4    0  1000M  0 part            5B0B-DC27                            nvme1n1p1 
└─nvme1n1p2 259:5    0   1,8T  0 part            178ba18b-3faa-4b38-b7e5-5b0f5d2f285c nvme1n1p2

Any help will be highly appreciated!

Edit: I checked pacman.log, but did not see any errors in it, but this beast is so big that it does not help me mcuh, that is…

dalto · January 27, 2024, 7:11pm

To answer that, we would need to see the full pacman log from the update right before it failed.

milkytwix · January 27, 2024, 7:29pm

Here we go:

less /var/log/pacman.log | grep 2024-01-27
[2024-01-27T12:05:13+0100] [PACMAN] Running 'pacman -S -y --config /etc/pacman.conf --'
[2024-01-27T12:05:14+0100] [PACMAN] synchronizing package lists
[2024-01-27T12:05:16+0100] [PACMAN] Running 'pacman -S -y -u --config /etc/pacman.conf --'
[2024-01-27T12:05:16+0100] [PACMAN] synchronizing package lists
[2024-01-27T12:05:16+0100] [PACMAN] starting full system upgrade
[2024-01-27T12:05:20+0100] [ALPM] running '05-snap-pac-pre.hook'...
[2024-01-27T12:05:20+0100] [ALPM-SCRIPTLET] ==> root: 2568
[2024-01-27T12:05:20+0100] [ALPM] running '60-dracut-remove.hook'...
[2024-01-27T12:05:21+0100] [ALPM] running '71-dkms-remove.hook'...
[2024-01-27T12:05:21+0100] [ALPM] transaction started
[2024-01-27T12:05:21+0100] [ALPM] upgraded xz (5.4.5-1 -> 5.4.6-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded chafa (1.14.0-1 -> 1.14.0-2)
[2024-01-27T12:05:21+0100] [ALPM] upgraded endeavouros-theming (23.11.1.1-1 -> 23.11.2.1-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded vulkan-icd-loader (1.3.274-1 -> 1.3.276-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded mesa (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:21+0100] [ALPM] upgraded libwpe (1.14.1-2 -> 1.14.2-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded orc (0.4.35-1 -> 0.4.36-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded eos-bash-shared (24.5-1 -> 24.6-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-xz (5.4.5-1 -> 5.4.6-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-colord (1.4.6-1 -> 1.4.7-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-libva-mesa-driver (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-vulkan-icd-loader (1.3.274-1 -> 1.3.276-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-mesa (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-mesa-vdpau (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-orc (0.4.34-1 -> 0.4.36-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded vulkan-radeon (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:21+0100] [ALPM] upgraded lib32-vulkan-radeon (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:21+0100] [ALPM] upgraded libjcat (0.2.0-1 -> 0.2.1-1)
[2024-01-27T12:05:21+0100] [ALPM] upgraded libva-mesa-driver (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:22+0100] [ALPM] upgraded linux-lts (6.6.13-1 -> 6.6.14-1)
[2024-01-27T12:05:23+0100] [ALPM] upgraded linux-lts-headers (6.6.13-1 -> 6.6.14-1)
[2024-01-27T12:05:23+0100] [ALPM] upgraded mesa-vdpau (1:23.3.3-1 -> 1:23.3.4-2)
[2024-01-27T12:05:23+0100] [ALPM] upgraded protobuf (25.1-1 -> 25.2-1)
[2024-01-27T12:05:23+0100] [ALPM] upgraded vulkan-headers (1:1.3.274-1 -> 1:1.3.276-1)
[2024-01-27T12:05:23+0100] [ALPM] transaction completed
[2024-01-27T12:05:23+0100] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2024-01-27T12:05:24+0100] [ALPM] running '30-systemd-update.hook'...
[2024-01-27T12:05:24+0100] [ALPM] running '60-depmod.hook'...
[2024-01-27T12:05:25+0100] [ALPM] running '70-dkms-install.hook'...
[2024-01-27T12:05:25+0100] [ALPM-SCRIPTLET] ==> dkms install --no-depmod vboxhost/7.0.14_OSE -k 6.6.14-1-lts
[2024-01-27T12:05:28+0100] [ALPM-SCRIPTLET] ==> dkms install --no-depmod zenpower3/0.2.0 -k 6.6.14-1-lts
[2024-01-27T12:05:30+0100] [ALPM-SCRIPTLET] ==> depmod 6.6.14-1-lts
[2024-01-27T12:05:31+0100] [ALPM] running '90-dracut-install.hook'...
[2024-01-27T12:05:31+0100] [ALPM-SCRIPTLET] :: Building initramfs for linux-lts (6.6.14-1-lts)
[2024-01-27T12:05:31+0100] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --force --hostonly --no-hostonly-cmdline /boot/initramfs-linux-lts.img 6.6.14-1-lts
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
[2024-01-27T12:05:32+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs-snapshot-overlay ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 70-persistent-net.rules
[2024-01-27T12:05:33+0100] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Files:                    815
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Linked:                   2 files
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Compared:                 45 files
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Saved:                    822 B
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: Duration:                 0.003723 seconds
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Constructing AuthenticAMD.bin ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-27T12:05:34+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-27T12:05:35+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-27T12:05:35+0100] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux-lts.img' ***
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux-lts.img' done ***
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] :: Building fallback initramfs for linux-lts (6.6.14-1-lts)
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --force --no-hostonly /boot/initramfs-linux-lts-fallback.img 6.6.14-1-lts
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'nvmf' depends on 'network', which can't be installed
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: *** Including module: bash ***
[2024-01-27T12:05:36+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: *** Including module: modsign ***
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: *** Including module: crypt ***
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: *** Including module: dm ***
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-dm.rules
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 55-dm.rules
[2024-01-27T12:05:37+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: lvm ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 56-lvm.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: mdraid ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-md-raid.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: nvdimm ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: qemu ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: qemu-net ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs-snapshot-overlay ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: lunmask ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: resume ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: virtiofs ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-27T12:05:38+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Files:                    2027
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Linked:                   9 files
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Compared:                 462 files
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Saved:                    1.42 MiB
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: Duration:                 0.012347 seconds
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: *** Constructing AuthenticAMD.bin ***
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-27T12:05:39+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-27T12:05:40+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-27T12:05:40+0100] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux-lts-fallback.img' ***
[2024-01-27T12:05:41+0100] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux-lts-fallback.img' done ***
[2024-01-27T12:05:41+0100] [ALPM] running '90-packagekit-refresh.hook'...
[2024-01-27T12:05:41+0100] [ALPM] running 'eos-reboot-required.hook'...
[2024-01-27T12:05:41+0100] [ALPM] running 'rebuild-detector.hook'...
[2024-01-27T12:05:42+0100] [ALPM] running 'update-desktop-database.hook'...
[2024-01-27T12:05:42+0100] [ALPM] running 'zz-snap-pac-post.hook'...
[2024-01-27T12:05:43+0100] [ALPM-SCRIPTLET] ==> root: 2569
[2024-01-27T12:18:14+0100] [PACMAN] Running 'pacman -S linux-lts'
[2024-01-27T12:18:17+0100] [ALPM] running '05-snap-pac-pre.hook'...
[2024-01-27T12:18:19+0100] [ALPM-SCRIPTLET] ==> root: 2570
[2024-01-27T12:18:19+0100] [ALPM] transaction started
[2024-01-27T12:18:19+0100] [ALPM] reinstalled linux-lts (6.6.14-1)
[2024-01-27T12:18:21+0100] [ALPM] transaction completed
[2024-01-27T12:18:22+0100] [ALPM] running '30-systemd-update.hook'...
[2024-01-27T12:18:22+0100] [ALPM] running '60-depmod.hook'...
[2024-01-27T12:18:23+0100] [ALPM] running '90-dracut-install.hook'...
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] :: Building initramfs for linux-lts (6.6.14-1-lts)
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --force --hostonly --no-hostonly-cmdline /boot/initramfs-linux-lts.img 6.6.14-1-lts
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
[2024-01-27T12:18:23+0100] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2024-01-27T12:18:24+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs-snapshot-overlay ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 70-persistent-net.rules
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-27T12:18:25+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Files:                    817
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Linked:                   2 files
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Compared:                 45 files
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Saved:                    822 B
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: Duration:                 0.003963 seconds
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Constructing AuthenticAMD.bin ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-27T12:18:26+0100] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux-lts.img' ***
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux-lts.img' done ***
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] :: Building fallback initramfs for linux-lts (6.6.14-1-lts)
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --force --no-hostonly /boot/initramfs-linux-lts-fallback.img 6.6.14-1-lts
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'dmraid' will not be installed, because command 'kpartx' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'nvmf' depends on 'network', which can't be installed
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
[2024-01-27T12:18:27+0100] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'mksquashfs' could not be found!
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: dracut module 'squash' will not be installed, because command 'unsquashfs' could not be found!
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: bash ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: modsign ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: crypt ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: dm ***
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-dm.rules
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 55-dm.rules
[2024-01-27T12:18:28+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: lvm ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 56-lvm.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: mdraid ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-md-raid.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: nvdimm ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: qemu ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: qemu-net ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs-snapshot-overlay ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: lunmask ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: resume ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: virtiofs ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-27T12:18:29+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Mode:                     real
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Method:                   sha256
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Files:                    2027
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Linked:                   9 files
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Compared:                 0 xattrs
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Compared:                 462 files
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Saved:                    1.42 MiB
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: Duration:                 0.017648 seconds
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Constructing AuthenticAMD.bin ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-27T12:18:30+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-27T12:18:31+0100] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-27T12:18:31+0100] [ALPM-SCRIPTLET] dracut: *** Creating image file '/boot/initramfs-linux-lts-fallback.img' ***
[2024-01-27T12:18:32+0100] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file '/boot/initramfs-linux-lts-fallback.img' done ***
[2024-01-27T12:18:32+0100] [ALPM] running '90-packagekit-refresh.hook'...
[2024-01-27T12:18:32+0100] [ALPM-SCRIPTLET] Error connecting: Could not connect: No such file or directory
[2024-01-27T12:18:32+0100] [ALPM] running 'eos-reboot-required.hook'...
[2024-01-27T12:18:32+0100] [ALPM] running 'rebuild-detector.hook'...
[2024-01-27T12:18:32+0100] [ALPM-SCRIPTLET] fatal library error, lookup self
[2024-01-27T12:18:33+0100] [ALPM] running 'zz-snap-pac-post.hook'...
[2024-01-27T12:18:33+0100] [ALPM-SCRIPTLET] fatal library error, lookup self
[2024-01-27T12:18:34+0100] [ALPM-SCRIPTLET] ==> root: 2571
[2024-01-27T16:11:10+0100] [PACMAN] Running 'pacman -S -y --config /etc/pacman.conf --'
[2024-01-27T16:11:10+0100] [PACMAN] synchronizing package lists
[2024-01-27T16:11:13+0100] [PACMAN] Running 'pacman -S -y -u --config /etc/pacman.conf --'
[2024-01-27T16:11:13+0100] [PACMAN] synchronizing package lists
[2024-01-27T16:11:13+0100] [PACMAN] starting full system upgrade
[2024-01-27T16:11:14+0100] [ALPM] running '05-snap-pac-pre.hook'...
[2024-01-27T16:11:14+0100] [ALPM-SCRIPTLET] ==> root: 2577
[2024-01-27T16:11:14+0100] [ALPM] transaction started
[2024-01-27T16:11:14+0100] [ALPM] upgraded atkmm (2.28.3-1 -> 2.28.4-1)
[2024-01-27T16:11:14+0100] [ALPM] upgraded gnupg (2.4.3-2 -> 2.4.4-1)
[2024-01-27T16:11:14+0100] [ALPM] upgraded pangomm (2.46.3-1 -> 2.46.4-1)
[2024-01-27T16:11:14+0100] [ALPM] transaction completed
[2024-01-27T16:11:14+0100] [ALPM] running '30-systemd-daemon-reload-system.hook'...
[2024-01-27T16:11:14+0100] [ALPM] running '30-systemd-daemon-reload-user.hook'...
[2024-01-27T16:11:14+0100] [ALPM] running '30-systemd-update.hook'...
[2024-01-27T16:11:14+0100] [ALPM] running '90-packagekit-refresh.hook'...
[2024-01-27T16:11:14+0100] [ALPM] running 'rebuild-detector.hook'...
[2024-01-27T16:11:15+0100] [ALPM] running 'texinfo-install.hook'...
[2024-01-27T16:11:15+0100] [ALPM] running 'zz-snap-pac-post.hook'...
[2024-01-27T16:11:15+0100] [ALPM-SCRIPTLET] ==> root: 2578

dalto · January 27, 2024, 7:38pm

What was the error/issue you saw during boot this time?

milkytwix · January 27, 2024, 7:42pm

There was no error at all - after boot it just had the three crucial grub options missing, the only one left was “Boot into UEFI settings”. So I did just that, grabbed my ventoy, plugged it in, rebooted into UEFI and did the reinstallation stuff - there I got the hint that Linux-LTS is already installed, I installed it anyway and then it was booting fine…

dalto · January 27, 2024, 7:55pm

EndeavourOS doesn’t modify your grub menu during an update.

I wonder if it has something to do with snap-pac.

dalto · January 27, 2024, 7:58pm

Actually, maybe it is btrfs-grub.

What does this command return:

systemctl list-unit-files | grep grub

milkytwix · January 27, 2024, 9:16pm

Wait… what?

systemctl list-unit-files | grep grub
grub-btrfsd.service                          enabled         disabled

dalto · January 27, 2024, 9:24pm

Any issues with that service? What does systemctl status grub-btrfsd.service show?

milkytwix · January 27, 2024, 9:48pm

None that I know of, beside the topic mentioned here, and the confusing “enabled disabled”.

systemctl status grub-btrfsd.service
● grub-btrfsd.service - Regenerate grub-btrfs.cfg
     Loaded: loaded (/usr/lib/systemd/system/grub-btrfsd.service; enabled; preset: disabled)
     Active: active (running) since Sat 2024-01-27 22:14:27 CET; 33min ago
   Main PID: 1112 (bash)
      Tasks: 3 (limit: 77041)
     Memory: 13.2M (peak: 21.0M)
        CPU: 4.727s
     CGroup: /system.slice/grub-btrfsd.service
             ├─ 1112 bash /usr/bin/grub-btrfsd --syslog /.snapshots
             ├─ 1119 bash /usr/bin/grub-btrfsd --syslog /.snapshots
             └─15364 inotifywait -q -q -e create -e delete -e unmount -t 0 /.snapshots

Jan 27 22:14:27 neuromancer grub-btrfsd[1117]: grub-btrfsd starting up...
Jan 27 22:14:27 neuromancer grub-btrfsd[1120]: 1119: Watching /.snapshots for new snapshots...
Jan 27 22:14:27 neuromancer grub-btrfsd[1175]: 1119: Detected snapshot creation/ deletion, recreating Grub menu
Jan 27 22:14:37 neuromancer grub-btrfsd[3252]: Grub menu recreated
Jan 27 22:24:22 neuromancer grub-btrfsd[13371]: 1119: Detected snapshot creation/ deletion, recreating Grub menu
Jan 27 22:24:29 neuromancer grub-btrfsd[15357]: Grub menu recreated

dalto · January 27, 2024, 10:01pm

That tells you it is enabled but it’s default state is disabled. That is pretty normal.

Here is the issue. It seems like something is changing your grub menu when you update. By default, we don’t touch the grub menu during an update.

At this point, we are guessing what it could be.

maqni · January 27, 2024, 11:16pm

For me, a similar thing has happened whenever during an update grub was updated, unless I enter following two lines into the terminal after the update and before rebooting:

sudo grub-install [...]
sudo grub-mkconfig -o /boot/grub/grub.cfg

whereby [...] needs to be replaced by the right command for BIOS or UEFI.
See this forum topic: Attention grub update.

Maybe that’s what can prevent you from having to archroot.

dalto · January 27, 2024, 11:32pm

Probably only the second one is needed in this case. However, that isn’t normal. You shouldn’t need to run grub-mkconfig after an update.

milkytwix · January 28, 2024, 1:00am

Any Idea how to proceed next time for additional information gathering?

ricklinux · January 28, 2024, 1:58am

I use grub on all my systems and i don’t run into this issue whether booting on EOS alone or dual booting with Windows. Only when there is an updated grub version do i reinstall grub and run the grub update command unless there is another reason to just run the update grub command. I am also running on btrfs with btrfs-assistant, snapper-support, and btrfsmaintenance. Not sure if i needed the btrfsd.service running or not as i recently reinstalled and just checked. It wasn’t running so i did start the service.