EndeavourOS hangs on boot (display drvr)

General system Newbie
1

Hi,

I must say at first - getting into Arch linux even with EndeavourOS has pretty damn steep learning curve. More on this later.

However my problem:
I’m running Dell Precision 5510 laptop with Nvidia Quadro M1000 graphics card. I installed Nvidia-drivers using these instructions. Everything went fine no problems, no errors. It told me to reboot so I did.

After reboot it wouldn’t boot so I disabled quiet mode. I have these messages as the last messages before it hangs:

[ OK ] Started Light Display Manager
[ OK ] Created slice system-systemd\x2dbacklight.slice.
          Starting Load/Save screen ?of leds:dell::kbd_backlight
[ OK ] Finished Load/Save screen ?s of leds:dell:kdb_backlight
[ OK ] Finished Load/save Random seed

And here I am completely stuck again, thinking whether it’s really worth it to try to get into Arch Linux. I have already had fair share of problems with Wifi, bluetooth and EndeavourOS accessibility -option that I accidentally installed. Tbh I spent 2 days fixing bluetooth/wifi so kinda feeling tired of yet another challenge. Btw I kinda disagree with Arch wiki saying bluetooth is more stable used from CLI - I have the opposite experience.

And I haven’t even started configuring tiling window manager that is one of my targets for using linux in the first place. Before that I should fix mouse scrolling speed and it doesnt seem like easy either.

So please… Tell me should I start fixing this problem? :upside_down_face:

2

Hello, what processor do you have?

3

That should be Nvidia display port / 4k monitor bug i believe, blame green!

Until it’s fixed unfortunately best way out is to switch for free nvidia drivers…

4
5

Not sure if request for help or just rant…

6

Fair enough =) I have looked for solutions for this issue for few hours as well. Haven’t found one yet. These are the sources I have been looking at…

https://wiki.archlinux.org/title/NVIDIA
https://wiki.archlinux.org/title/NVIDIA_Optimus#Using_PRIME_render_offload
+Dozen forum / reddit -threads.

7

Thanks! I noticed this as well. tty2…3 etc are working without problems. But display manager doesn’t start as you say.

8

Is there any way to export Xorg.0.log easily from terminal into some place where I could post/link it here if it helps?

9

Also tried this script. I’m using LightDM btw.

If I type xrandr it says “Can’t open display”.

10

You can upload that directly, or rather copy its contents (just use cat in the terminal to read the file), to a pastebin. Depending on how much or how little it is, you can paste the contents here, enclosed in code tags (three backticks, enter, paste code, enter, three backticks).

There’s also a couple of tools to grab logs for you, and I think the links to those are top right under Help, but I haven’t used those myself so you’ll have to figure those out yourself.

11

3 hours in trying to resolve… Output of:

inxi -Ga
https://pastebin.com/JsvRFQpR

lsmod | grep nvidia
https://pastebin.com/eScwQKwH

lightdm.log
https://pastebin.com/k5vjVe0D

seat0.greeter.log
https://pastebin.com/TgU7XT5P

xorg.conf
https://pastebin.com/wm5xhy3t

12

lspci -nnk
https://pastebin.com/yn7uQUDg

dmesg
https://pastebin.com/udh0Vyii

13

@Eraseri
Did you set up all the optional nvidia enhancements.

Also did you set logind-check-graphical=true

14

If your thinking is that everything has a copy-paste quick-fix then no, Arch probably isn’t worth it. You probably want to start with Ubuntu or Mint.

1 Like
15

Thanks for help!

Another thing I noticed is that when I SSH into computer, the SSH-client gives me error: X11 forwarding request failed on channel 0.

Installed arandr and… Well I don’t know how to configure arandr from CLI. I’m starting to think I have messed xorg somehow because of these error messages.

arandr --help
Unable to init server: Could not connect: Connection refused
Unable to init server: Could not connect: Connection refused
Usage: arandr [savedfile]

Another XRandrR GUI

Options:
  --version          show program's version number and exit
  -h, --help         show this help message and exit
  --randr-display=D  Use D as display for xrandr (but still show the GUI on
                     the display from the environment; e.g. `localhost:10.0`)
  --force-version    Even run with untested XRandR versions

I edited lightdm config and set logind-check-graphical=true

I ran the nvidia optional enchantments. There was …somekind of progress. Now my cursor isn’t blinking any more in top left corner after I boot. Now it just sits there. It used to blink previously. I booted without quiet-mode. So unfortunately it didn’t help. I didn’t run the enchament to avoid screen tearing or build hook.

Here is my Xorg.0.log

cat /var/log/Xorg.0.log
[     5.776] 
X.Org X Server 1.20.11
X Protocol Version 11, Revision 0
[     5.776] Build Operating System: Linux Archlinux
[     5.776] Current Operating System: Linux presari5510 5.12.8-arch1-1 #1 SMP PREEMPT Fri, 28 May 2021 15:10:20 +0000 x86_64
[     5.776] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=554454db-65bd-4971-a1e1-fefe7725058c rw nvidia-drm.modeset=1 resume=UUID=ed67a59e-0370-4bdd-8bef-ff58e161dbb1 loglevel=3 nowatchdog
[     5.776] Build Date: 13 April 2021  03:12:10PM
[     5.776]  
[     5.776] Current version of pixman: 0.40.0
[     5.776] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.776] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.776] (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 31 16:01:38 2021
[     5.777] (==) Using config file: "/etc/X11/xorg.conf"
[     5.777] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     5.777] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.778] (==) ServerLayout "Layout0"
[     5.778] (**) |-->Screen "Screen0" (0)
[     5.778] (**) |   |-->Monitor "Monitor0"
[     5.778] (**) |   |-->Device "Device0"
[     5.778] (**) |   |-->GPUDevice "Device0"
[     5.778] (**) |-->Input Device "Keyboard0"
[     5.778] (**) |-->Input Device "Mouse0"
[     5.778] (==) Automatically adding devices
[     5.778] (==) Automatically enabling devices
[     5.778] (==) Automatically adding GPU devices
[     5.778] (==) Automatically binding GPU devices
[     5.778] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.778] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     5.778] 	Entry deleted from font path.
[     5.779] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[     5.779] 	Entry deleted from font path.
[     5.779] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[     5.779] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[     5.779] 	Entry deleted from font path.
[     5.779] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF").
[     5.779] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     5.779] 	Entry deleted from font path.
[     5.779] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     5.779] 	Entry deleted from font path.
[     5.779] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     5.779] 	Entry deleted from font path.
[     5.779] (==) FontPath set to:
	
[     5.779] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.779] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[     5.779] (WW) Disabling Keyboard0
[     5.779] (WW) Disabling Mouse0
[     5.779] (II) Module ABI versions:
[     5.779] 	X.Org ANSI C Emulation: 0.4
[     5.779] 	X.Org Video Driver: 24.1
[     5.779] 	X.Org XInput driver : 24.1
[     5.779] 	X.Org Server Extension : 10.0
[     5.780] (++) using VT number 7

[     5.780] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     5.780] (II) xfree86: Adding drm device (/dev/dri/card0)
[     5.781] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[     5.782] (--) PCI:*(0@0:2:0) 8086:191b:1028:06e5 rev 6, Mem @ 0xdb000000/16777216, 0x70000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     5.782] (--) PCI: (1@0:0:0) 10de:13b1:1028:06e5 rev 162, Mem @ 0xdc000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[     5.782] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     5.782] (II) LoadModule: "glx"
[     5.785] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.810] (II) Module glx: vendor="X.Org Foundation"
[     5.810] 	compiled for 1.20.11, module version = 1.0.0
[     5.810] 	ABI class: X.Org Server Extension, version 10.0
[     5.810] (II) LoadModule: "nvidia"
[     5.813] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     5.822] (II) Module nvidia: vendor="NVIDIA Corporation"
[     5.822] 	compiled for 1.6.99.901, module version = 1.0.0
[     5.822] 	Module class: X.Org Video Driver
[     5.822] (II) NVIDIA dlloader X Driver  465.31  Thu May 13 22:19:15 UTC 2021
[     5.822] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     5.827] (II) Loading sub module "fb"
[     5.827] (II) LoadModule: "fb"
[     5.828] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.829] (II) Module fb: vendor="X.Org Foundation"
[     5.829] 	compiled for 1.20.11, module version = 1.0.0
[     5.829] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.829] (II) Loading sub module "wfb"
[     5.829] (II) LoadModule: "wfb"
[     5.829] (II) Loading /usr/lib/xorg/modules/libwfb.so
[     5.830] (II) Module wfb: vendor="X.Org Foundation"
[     5.830] 	compiled for 1.20.11, module version = 1.0.0
[     5.830] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.830] (II) Loading sub module "ramdac"
[     5.830] (II) LoadModule: "ramdac"
[     5.830] (II) Module "ramdac" already built-in
[     5.853] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[     5.853] (==) NVIDIA(0): RGB weight 888
[     5.853] (==) NVIDIA(0): Default visual is TrueColor
[     5.853] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.858] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[     5.858] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[     5.858] (**) NVIDIA(0): Enabling 2D acceleration
[     5.859] (II) Loading sub module "glxserver_nvidia"
[     5.859] (II) LoadModule: "glxserver_nvidia"
[     5.859] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[     5.908] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[     5.908] 	compiled for 1.6.99.901, module version = 1.0.0
[     5.908] 	Module class: X.Org Server Extension
[     5.908] (II) NVIDIA GLX Module  465.31  Thu May 13 22:16:59 UTC 2021
[     5.909] (II) NVIDIA: The X server supports PRIME Render Offload.
[     5.910] (II) NVIDIA(0): NVIDIA GPU NVIDIA Quadro M1000M (GM107GL-A) at PCI:1:0:0
[     5.910] (II) NVIDIA(0):     (GPU-0)
[     5.910] (--) NVIDIA(0): Memory: 2097152 kBytes
[     5.910] (--) NVIDIA(0): VideoBIOS: 82.07.82.00.29
[     5.910] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[     5.910] (II) NVIDIA(0): Validated MetaModes:
[     5.910] (II) NVIDIA(0):     "NULL"
[     5.910] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[     5.910] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[     5.910] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[     5.911] (II) NVIDIA: Reserving 6144.00 MB of virtual memory for indirect memory
[     5.911] (II) NVIDIA:     access.
[     5.916] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[     5.916] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[     5.916] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[     5.916] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[     5.916] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[     5.916] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[     5.916] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[     5.916] (II) NVIDIA(0):     Config Options in the README.
[     5.972] (II) NVIDIA(0): Setting mode "NULL"
[     5.999] (==) NVIDIA(0): Disabling shared memory pixmaps
[     5.999] (==) NVIDIA(0): Backing store enabled
[     6.000] (==) NVIDIA(0): Silken mouse disabled
[     6.000] (**) NVIDIA(0): DPMS enabled
[     6.002] (II) Loading sub module "dri2"
[     6.002] (II) LoadModule: "dri2"
[     6.002] (II) Module "dri2" already built-in
[     6.002] (II) NVIDIA(0): [DRI2] Setup complete
[     6.002] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[     6.003] (II) Initializing extension Generic Event Extension
[     6.003] (II) Initializing extension SHAPE
[     6.003] (II) Initializing extension MIT-SHM
[     6.003] (II) Initializing extension XInputExtension
[     6.003] (II) Initializing extension XTEST
[     6.003] (II) Initializing extension BIG-REQUESTS
[     6.003] (II) Initializing extension SYNC
[     6.003] (II) Initializing extension XKEYBOARD
[     6.003] (II) Initializing extension XC-MISC
[     6.003] (II) Initializing extension SECURITY
[     6.003] (II) Initializing extension XFIXES
[     6.003] (II) Initializing extension RENDER
[     6.004] (II) Initializing extension RANDR
[     6.004] (II) Initializing extension COMPOSITE
[     6.004] (II) Initializing extension DAMAGE
[     6.004] (II) Initializing extension MIT-SCREEN-SAVER
[     6.004] (II) Initializing extension DOUBLE-BUFFER
[     6.004] (II) Initializing extension RECORD
[     6.004] (II) Initializing extension DPMS
[     6.004] (II) Initializing extension Present
[     6.004] (II) Initializing extension DRI3
[     6.004] (II) Initializing extension X-Resource
[     6.004] (II) Initializing extension XVideo
[     6.004] (II) Initializing extension XVideo-MotionCompensation
[     6.004] (II) Initializing extension GLX
[     6.004] (II) Initializing extension GLX
[     6.005] (II) Indirect GLX disabled.
[     6.005] (II) GLX: Another vendor is already registered for screen 0
[     6.005] (II) Initializing extension XFree86-VidModeExtension
[     6.005] (II) Initializing extension XFree86-DGA
[     6.005] (II) Initializing extension XFree86-DRI
[     6.005] (II) Initializing extension DRI2
[     6.005] (II) Initializing extension NV-GLX
[     6.005] (II) Initializing extension NV-CONTROL
[     6.087] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     6.088] (**) Power Button: Applying InputClass "devname"
[     6.088] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.088] (**) Power Button: Applying InputClass "system-keyboard"
[     6.088] (II) LoadModule: "libinput"
[     6.088] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     6.092] (II) Module libinput: vendor="X.Org Foundation"
[     6.092] 	compiled for 1.20.11, module version = 1.0.1
[     6.092] 	Module class: X.Org XInput Driver
[     6.092] 	ABI class: X.Org XInput driver, version 24.1
[     6.092] (II) Using input driver 'libinput' for 'Power Button'
[     6.092] (**) Power Button: always reports core events
[     6.092] (**) Option "Device" "/dev/input/event3"
[     6.093] (**) Option "_source" "server/udev"
[     6.101] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.101] (II) event3  - Power Button: device is a keyboard
[     6.101] (II) event3  - Power Button: device removed
[     6.116] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     6.116] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     6.116] (**) Option "xkb_layout" "fi"
[     6.116] (**) Option "xkb_variant" "winkeys"
[     6.133] (II) event3  - Power Button: is tagged by udev as: Keyboard
[     6.133] (II) event3  - Power Button: device is a keyboard
[     6.134] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     6.134] (**) Power Button: Applying InputClass "devname"
[     6.134] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     6.134] (**) Power Button: Applying InputClass "system-keyboard"
[     6.134] (II) Using input driver 'libinput' for 'Power Button'
[     6.134] (**) Power Button: always reports core events
[     6.134] (**) Option "Device" "/dev/input/event1"
[     6.134] (**) Option "_source" "server/udev"
[     6.134] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.134] (II) event1  - Power Button: device is a keyboard
[     6.134] (II) event1  - Power Button: device removed
[     6.136] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     6.136] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     6.136] (**) Option "xkb_layout" "fi"
[     6.136] (**) Option "xkb_variant" "winkeys"
[     6.137] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     6.137] (II) event1  - Power Button: device is a keyboard
[     6.137] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     6.137] (**) Lid Switch: Applying InputClass "devname"
[     6.137] (II) Using input driver 'libinput' for 'Lid Switch'
[     6.137] (**) Lid Switch: always reports core events
[     6.137] (**) Option "Device" "/dev/input/event0"
[     6.137] (**) Option "_source" "server/udev"
[     6.138] (II) event0  - Lid Switch: is tagged by udev as: Switch
[     6.138] (II) event0  - Lid Switch: device is a switch device
[     6.138] (II) event0  - Lid Switch: device is a switch device
[     6.138] (II) event0  - Lid Switch: device removed
[     6.153] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0"
[     6.153] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 8)
[     6.153] (II) event0  - Lid Switch: is tagged by udev as: Switch
[     6.153] (II) event0  - Lid Switch: device is a switch device
[     6.153] (II) event0  - Lid Switch: device is a switch device
[     6.154] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     6.154] (**) Sleep Button: Applying InputClass "devname"
[     6.154] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     6.154] (**) Sleep Button: Applying InputClass "system-keyboard"
[     6.154] (II) Using input driver 'libinput' for 'Sleep Button'
[     6.154] (**) Sleep Button: always reports core events
[     6.154] (**) Option "Device" "/dev/input/event2"
[     6.154] (**) Option "_source" "server/udev"
[     6.154] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     6.154] (II) event2  - Sleep Button: device is a keyboard
[     6.154] (II) event2  - Sleep Button: device removed
[     6.166] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[     6.166] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     6.166] (**) Option "xkb_layout" "fi"
[     6.166] (**) Option "xkb_variant" "winkeys"
[     6.167] (II) event2  - Sleep Button: is tagged by udev as: Keyboard
[     6.167] (II) event2  - Sleep Button: device is a keyboard
[     6.168] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[     6.168] (**) Intel HID events: Applying InputClass "devname"
[     6.168] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     6.168] (**) Intel HID events: Applying InputClass "system-keyboard"
[     6.168] (II) Using input driver 'libinput' for 'Intel HID events'
[     6.168] (**) Intel HID events: always reports core events
[     6.168] (**) Option "Device" "/dev/input/event5"
[     6.168] (**) Option "_source" "server/udev"
[     6.168] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     6.168] (II) event5  - Intel HID events: device is a keyboard
[     6.168] (II) event5  - Intel HID events: device removed
[     6.183] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event5"
[     6.183] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 10)
[     6.183] (**) Option "xkb_layout" "fi"
[     6.183] (**) Option "xkb_variant" "winkeys"
[     6.183] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     6.183] (II) event5  - Intel HID events: device is a keyboard
[     6.184] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[     6.184] (**) Dell WMI hotkeys: Applying InputClass "devname"
[     6.184] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.184] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[     6.184] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     6.184] (**) Dell WMI hotkeys: always reports core events
[     6.184] (**) Option "Device" "/dev/input/event9"
[     6.184] (**) Option "_source" "server/udev"
[     6.185] (II) event9  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.185] (II) event9  - Dell WMI hotkeys: device is a keyboard
[     6.185] (II) event9  - Dell WMI hotkeys: device removed
[     6.209] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12/event9"
[     6.209] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 11)
[     6.209] (**) Option "xkb_layout" "fi"
[     6.209] (**) Option "xkb_variant" "winkeys"
[     6.210] (II) event9  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.210] (II) event9  - Dell WMI hotkeys: device is a keyboard
[     6.211] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     6.211] (**) AT Translated Set 2 keyboard: Applying InputClass "devname"
[     6.211] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     6.211] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     6.211] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     6.211] (**) AT Translated Set 2 keyboard: always reports core events
[     6.211] (**) Option "Device" "/dev/input/event4"
[     6.211] (**) Option "_source" "server/udev"
[     6.211] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.211] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     6.212] (II) event4  - AT Translated Set 2 keyboard: device removed
[     6.223] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     6.223] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     6.223] (**) Option "xkb_layout" "fi"
[     6.223] (**) Option "xkb_variant" "winkeys"
[     6.224] (II) event4  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     6.224] (II) event4  - AT Translated Set 2 keyboard: device is a keyboard
[     6.224] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[     6.224] (**) PC Speaker: Applying InputClass "devname"
[     6.224] (II) Using input driver 'libinput' for 'PC Speaker'
[     6.224] (**) PC Speaker: always reports core events
[     6.224] (**) Option "Device" "/dev/input/event6"
[     6.224] (**) Option "_source" "server/udev"
[     6.225] (II) event6  - PC Speaker: not tagged as supported input device
[     6.249] (II) event6  - not using input device '/dev/input/event6'.
[     6.249] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event6
[     6.249] (EE) PreInit returned 2 for "PC Speaker"
[     6.249] (II) UnloadModule: "libinput"
[     6.255] (II) config/udev: removing device Intel HID events
[     6.255] (II) event5  - Intel HID events: device removed
[     6.269] (II) UnloadModule: "libinput"
[     6.270] (II) config/udev: Adding input device Intel HID events (/dev/input/event5)
[     6.270] (**) Intel HID events: Applying InputClass "devname"
[     6.270] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[     6.270] (**) Intel HID events: Applying InputClass "system-keyboard"
[     6.270] (II) Using input driver 'libinput' for 'Intel HID events'
[     6.270] (**) Intel HID events: always reports core events
[     6.270] (**) Option "Device" "/dev/input/event5"
[     6.270] (**) Option "_source" "server/udev"
[     6.270] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     6.270] (II) event5  - Intel HID events: device is a keyboard
[     6.270] (II) event5  - Intel HID events: device removed
[     6.283] (**) Option "config_info" "udev:/sys/devices/platform/INT33D5:00/input/input6/event5"
[     6.283] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 10)
[     6.283] (**) Option "xkb_layout" "fi"
[     6.283] (**) Option "xkb_variant" "winkeys"
[     6.284] (II) event5  - Intel HID events: is tagged by udev as: Keyboard
[     6.284] (II) event5  - Intel HID events: device is a keyboard
[     6.284] (II) config/udev: removing device Dell WMI hotkeys
[     6.284] (II) event9  - Dell WMI hotkeys: device removed
[     6.303] (II) UnloadModule: "libinput"
[     6.303] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event9)
[     6.303] (**) Dell WMI hotkeys: Applying InputClass "devname"
[     6.303] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     6.303] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[     6.303] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[     6.303] (**) Dell WMI hotkeys: always reports core events
[     6.303] (**) Option "Device" "/dev/input/event9"
[     6.303] (**) Option "_source" "server/udev"
[     6.304] (II) event9  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.304] (II) event9  - Dell WMI hotkeys: device is a keyboard
[     6.304] (II) event9  - Dell WMI hotkeys: device removed
[     6.336] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12/event9"
[     6.336] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 11)
[     6.336] (**) Option "xkb_layout" "fi"
[     6.336] (**) Option "xkb_variant" "winkeys"
[     6.337] (II) event9  - Dell WMI hotkeys: is tagged by udev as: Keyboard
[     6.337] (II) event9  - Dell WMI hotkeys: device is a keyboard
[     6.338] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event10)
[     6.338] (**) HDA Intel PCH Headphone Mic: Applying InputClass "devname"
[     6.338] (II) Using input driver 'libinput' for 'HDA Intel PCH Headphone Mic'
[     6.338] (**) HDA Intel PCH Headphone Mic: always reports core events
[     6.338] (**) Option "Device" "/dev/input/event10"
[     6.338] (**) Option "_source" "server/udev"
[     6.338] (II) event10 - HDA Intel PCH Headphone Mic: is tagged by udev as: Switch
[     6.363] (II) event10 - not using input device '/dev/input/event10'.
[     6.363] (EE) libinput: HDA Intel PCH Headphone Mic: Failed to create a device for /dev/input/event10
[     6.363] (EE) PreInit returned 2 for "HDA Intel PCH Headphone Mic"
[     6.363] (II) UnloadModule: "libinput"
[     6.363] (II) config/udev: Adding input device DLL06E5:01 06CB:7A13 Mouse (/dev/input/event7)
[     6.363] (**) DLL06E5:01 06CB:7A13 Mouse: Applying InputClass "devname"
[     6.363] (**) DLL06E5:01 06CB:7A13 Mouse: Applying InputClass "libinput pointer catchall"
[     6.363] (II) Using input driver 'libinput' for 'DLL06E5:01 06CB:7A13 Mouse'
[     6.363] (**) DLL06E5:01 06CB:7A13 Mouse: always reports core events
[     6.363] (**) Option "Device" "/dev/input/event7"
[     6.363] (**) Option "_source" "server/udev"
[     6.364] (II) event7  - DLL06E5:01 06CB:7A13 Mouse: is tagged by udev as: Mouse Pointingstick
[     6.364] (II) event7  - DLL06E5:01 06CB:7A13 Mouse: device is a pointer
[     6.365] (II) event7  - DLL06E5:01 06CB:7A13 Mouse: device removed
[     6.386] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input13/event7"
[     6.386] (II) XINPUT: Adding extended input device "DLL06E5:01 06CB:7A13 Mouse" (type: MOUSE, id 13)
[     6.386] (**) Option "AccelerationScheme" "none"
[     6.386] (**) DLL06E5:01 06CB:7A13 Mouse: (accel) selected scheme none/0
[     6.386] (**) DLL06E5:01 06CB:7A13 Mouse: (accel) acceleration factor: 2.000
[     6.386] (**) DLL06E5:01 06CB:7A13 Mouse: (accel) acceleration threshold: 4
[     6.387] (II) event7  - DLL06E5:01 06CB:7A13 Mouse: is tagged by udev as: Mouse Pointingstick
[     6.387] (II) event7  - DLL06E5:01 06CB:7A13 Mouse: device is a pointer
[     6.388] (II) config/udev: Adding input device DLL06E5:01 06CB:7A13 Touchpad (/dev/input/event8)
[     6.388] (**) DLL06E5:01 06CB:7A13 Touchpad: Applying InputClass "devname"
[     6.388] (**) DLL06E5:01 06CB:7A13 Touchpad: Applying InputClass "libinput touchpad catchall"
[     6.388] (II) Using input driver 'libinput' for 'DLL06E5:01 06CB:7A13 Touchpad'
[     6.388] (**) DLL06E5:01 06CB:7A13 Touchpad: always reports core events
[     6.388] (**) Option "Device" "/dev/input/event8"
[     6.388] (**) Option "_source" "server/udev"
[     6.389] (II) event8  - DLL06E5:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[     6.390] (II) event8  - DLL06E5:01 06CB:7A13 Touchpad: device is a touchpad
[     6.390] (II) event8  - DLL06E5:01 06CB:7A13 Touchpad: device removed
[     6.403] (**) Option "Tapping" "on"
[     6.403] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-2/i2c-DLL06E5:01/0018:06CB:7A13.0001/input/input14/event8"
[     6.403] (II) XINPUT: Adding extended input device "DLL06E5:01 06CB:7A13 Touchpad" (type: TOUCHPAD, id 14)
[     6.404] (**) Option "AccelerationScheme" "none"
[     6.404] (**) DLL06E5:01 06CB:7A13 Touchpad: (accel) selected scheme none/0
[     6.404] (**) DLL06E5:01 06CB:7A13 Touchpad: (accel) acceleration factor: 2.000
[     6.404] (**) DLL06E5:01 06CB:7A13 Touchpad: (accel) acceleration threshold: 4
[     6.404] (II) event8  - DLL06E5:01 06CB:7A13 Touchpad: is tagged by udev as: Touchpad
[     6.405] (II) event8  - DLL06E5:01 06CB:7A13 Touchpad: device is a touchpad
[     6.406] (II) config/udev: Adding input device DLL06E5:01 06CB:7A13 Mouse (/dev/input/mouse0)
[     6.406] (**) DLL06E5:01 06CB:7A13 Mouse: Applying InputClass "devname"
[     6.406] (II) Using input driver 'libinput' for 'DLL06E5:01 06CB:7A13 Mouse'
[     6.406] (**) DLL06E5:01 06CB:7A13 Mouse: always reports core events
[     6.406] (**) Option "Device" "/dev/input/mouse0"
[     6.406] (**) Option "_source" "server/udev"
[     6.423] (II) mouse0  - not using input device '/dev/input/mouse0'.
[     6.423] (EE) libinput: DLL06E5:01 06CB:7A13 Mouse: Failed to create a device for /dev/input/mouse0
[     6.423] (EE) PreInit returned 2 for "DLL06E5:01 06CB:7A13 Mouse"
[     6.423] (II) UnloadModule: "libinput"
[     6.423] (II) config/udev: Adding input device DLL06E5:01 06CB:7A13 Touchpad (/dev/input/mouse1)
[     6.423] (**) DLL06E5:01 06CB:7A13 Touchpad: Applying InputClass "devname"
[     6.423] (II) Using input driver 'libinput' for 'DLL06E5:01 06CB:7A13 Touchpad'
[     6.423] (**) DLL06E5:01 06CB:7A13 Touchpad: always reports core events
[     6.423] (**) Option "Device" "/dev/input/mouse1"
[     6.423] (**) Option "_source" "server/udev"
[     6.446] (II) mouse1  - not using input device '/dev/input/mouse1'.
[     6.446] (EE) libinput: DLL06E5:01 06CB:7A13 Touchpad: Failed to create a device for /dev/input/mouse1
[     6.446] (EE) PreInit returned 2 for "DLL06E5:01 06CB:7A13 Touchpad"
[     6.446] (II) UnloadModule: "libinput"
[     7.517] (II) config/udev: Adding input device Integrated_Webcam_HD: Integrate (/dev/input/event11)
[     7.517] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "devname"
[     7.517] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "libinput keyboard catchall"
[     7.517] (**) Integrated_Webcam_HD: Integrate: Applying InputClass "system-keyboard"
[     7.517] (II) Using input driver 'libinput' for 'Integrated_Webcam_HD: Integrate'
[     7.517] (**) Integrated_Webcam_HD: Integrate: always reports core events
[     7.517] (**) Option "Device" "/dev/input/event11"
[     7.517] (**) Option "_source" "server/udev"
[     7.520] (II) event11 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[     7.521] (II) event11 - Integrated_Webcam_HD: Integrate: device is a keyboard
[     7.521] (II) event11 - Integrated_Webcam_HD: Integrate: device removed
[     7.546] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input17/event11"
[     7.546] (II) XINPUT: Adding extended input device "Integrated_Webcam_HD: Integrate" (type: KEYBOARD, id 15)
[     7.546] (**) Option "xkb_layout" "fi"
[     7.546] (**) Option "xkb_variant" "winkeys"
[     7.548] (II) event11 - Integrated_Webcam_HD: Integrate: is tagged by udev as: Keyboard
[     7.549] (II) event11 - Integrated_Webcam_HD: Integrate: device is a keyboard
[   156.534] (II) event3  - Power Button: device removed
[   156.583] (II) event1  - Power Button: device removed
[   156.610] (II) event0  - Lid Switch: device removed
[   156.650] (II) event2  - Sleep Button: device removed
[   156.676] (II) event4  - AT Translated Set 2 keyboard: device removed
[   156.703] (II) event5  - Intel HID events: device removed
[   156.743] (II) event9  - Dell WMI hotkeys: device removed
[   156.810] (II) event7  - DLL06E5:01 06CB:7A13 Mouse: device removed
[   156.863] (II) event8  - DLL06E5:01 06CB:7A13 Touchpad: device removed
[   156.903] (II) event11 - Integrated_Webcam_HD: Integrate: device removed

and here is lightdm.log

[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.30.0, UID=0 PID=313
[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Registered seat module local
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ‘gio-vfs’
[+0.10s] DEBUG: Monitoring logind for seats
[+0.10s] DEBUG: New seat added from logind: seat0
[+0.10s] DEBUG: Seat seat0: Loading properties from config section Seat:*
[+0.10s] DEBUG: Seat seat0 has property CanMultiSession=no
[+0.10s] DEBUG: Seat seat0: Starting
[+0.10s] DEBUG: Seat seat0: Creating greeter session
[+0.10s] DEBUG: Seat seat0: Creating display server of type x
[+0.10s] DEBUG: Could not run plymouth --ping: Failed to execute child process “plymouth” (No such file or directory)
[+0.10s] DEBUG: Using VT 7
[+0.10s] DEBUG: Seat seat0: Starting local X display on VT 7
[+0.10s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log
[+0.10s] DEBUG: XServer 0: Writing X server authority to /run/lightdm/root/:0
[+0.10s] DEBUG: XServer 0: Launching X Server
[+0.10s] DEBUG: Launching process 331: /usr/bin/X :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.10s] DEBUG: XServer 0: Waiting for ready signal from X server :0
[+0.10s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.10s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.28s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.28s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+0.61s] DEBUG: Got signal 10 from process 331
[+0.61s] DEBUG: XServer 0: Got signal from X server :0
[+0.61s] DEBUG: XServer 0: Connecting to XServer :0
[+0.64s] DEBUG: Launching process 543: /etc/lightdm/display_setup.sh
[+0.80s] DEBUG: Process 543 exited with return value 0
[+0.80s] DEBUG: Seat seat0: Exit status of /etc/lightdm/display_setup.sh: 0
[+0.80s] DEBUG: Seat seat0: Display server ready, starting session authentication
[+0.80s] DEBUG: Session pid=577: Started with service 'lightdm-greeter', username 'lightdm'
[+0.81s] DEBUG: Session pid=577: Authentication complete with return value 0: Success
[+0.81s] DEBUG: Seat seat0: Session authenticated, running command
[+0.81s] DEBUG: Session pid=577: Running command /usr/bin/lightdm-gtk-greeter
[+0.81s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm
[+0.81s] DEBUG: Session pid=577: Logging to /var/log/lightdm/seat0-greeter.log
[+0.92s] DEBUG: Activating VT 7
[+0.92s] DEBUG: Activating login1 session c1
[+0.92s] DEBUG: Seat seat0 changes active session to c1
[+0.92s] DEBUG: Session c1 is already active
[+1.16s] DEBUG: Greeter connected version=1.30.0 api=1 resettable=false
[+1.41s] DEBUG: Greeter start authentication for olli
[+1.41s] DEBUG: Session pid=642: Started with service 'lightdm', username 'olli'
[+1.42s] DEBUG: Session pid=642: Got 1 message(s) from PAM
[+1.42s] DEBUG: Prompt greeter with 1 message(s)
[+151.30s] DEBUG: Seat seat0 changes active session to 
[+157.43s] DEBUG: Seat seat0 changes active session to 2
16

I’ve been using Ubuntu for some time now and surely it has it’s own problems =)

Here is my lightdm config. I tested with and without the display_setup.sh-script

lightdm --show-config
   [Seat:*]
A  logind-check-graphical=true 
A  display-setup-script=/etc/lightdm/display_setup.sh
A  greeter-session=lightdm-gtk-greeter
A  user-session=i3
A  session-wrapper=/etc/lightdm/Xsession

   [LightDM]
A  run-directory=/run/lightdm

Sources:
A  /etc/lightdm/lightdm.conf
17

Hmm. I checked status of lightdm-service and there seems to be something going on when I hammer buttons. Cursor is steady at top-left corner, otherwise blank screen.

lightdm.service - Light Display Manager
     Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; vendor preset: disabled)
     Active: active (running) since Mon 2021-05-31 17:34:31 EEST; 2min 25s ago
       Docs: man:lightdm(1)
   Main PID: 877 (lightdm)
      Tasks: 5 (limit: 18959)
     Memory: 18.0M
        CPU: 811ms
     CGroup: /system.slice/lightdm.service
             ├─877 /usr/bin/lightdm
             ├─883 /usr/lib/Xorg :0 -seat seat0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
             └─968 lightdm --session-child 12 19

touko 31 17:34:31 presari5510 systemd[1]: Starting Light Display Manager...
touko 31 17:34:31 presari5510 systemd[1]: Started Light Display Manager.
touko 31 17:34:32 presari5510 lightdm[892]: pam_unix(lightdm-greeter:session): session opened for user lightdm(uid=969) by>
touko 31 17:36:17 presari5510 lightdm[940]: pam_unix(lightdm:auth): authentication failure; logname= uid=0 euid=0 tty=:0 r>
touko 31 17:36:17 presari5510 lightdm[940]: pam_systemd_home(lightdm:auth): systemd-homed is not available: Unit dbus-org.>
touko 31 17:36:50 presari5510 lightdm[957]: pam_unix(lightdm:auth): authentication failure; logname= uid=0 euid=0 tty=:0 r>
touko 31 17:36:50 presari5510 lightdm[957]: pam_systemd_home(lightdm:auth): systemd-homed is not available: Unit dbus-org.>
touko 31 17:36:53 presari5510 lightdm[967]: pam_unix(lightdm:auth): authentication failure; logname= uid=0 euid=0 tty=:0 r>
touko 31 17:36:53 presari5510 lightdm[967]: pam_systemd_home(lightdm:auth): systemd-homed is not available: Unit dbus-org.>
touko 31 17:36:53 presari5510 lightdm[967]: pam_faillock(lightdm:auth): Consecutive login failures for user olli account t>
~
18

Please return the following outputs as text with three ``` before and after the text.

inxi -Fxxxza --no-host
sudo parted -l (the letter L not a #1)

1 Like
19 
System:    Kernel: 5.12.8-arch1-1 x86_64 bits: 64 compiler: gcc v: 11.1.0 
           parameters: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=554454db-65bd-4971-a1e1-fefe7725058c rw 
           nvidia-drm.modeset=1 quiet resume=UUID=ed67a59e-0370-4bdd-8bef-ff58e161dbb1 loglevel=3 nowatchdog 
           Console: tty pts/0 DM: LightDM 1.30.0 Distro: EndeavourOS base: Arch Linux 
Machine:   Type: Laptop System: Dell product: Precision 5510 v: N/A serial: <filter> Chassis: type: 9 serial: <filter> 
           Mobo: Dell model: 0N8J4R v: A00 serial: <filter> UEFI: Dell v: 1.16.1 date: 02/23/2021 
Battery:   ID-1: BAT0 charge: 40.1 Wh (100.0%) condition: 40.1/84.0 Wh (47.8%) volts: 12.4 min: 11.4 
           model: SMP DELL 1P6KD5A type: Li-poly serial: <filter> status: Full 
CPU:       Info: Dual Core model: Intel Core i7-6820HQ bits: 64 type: MCP arch: Skylake-S family: 6 model-id: 5E (94) 
           stepping: 3 microcode: E2 cache: L2: 8 MiB 
           flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 10803 
           Speed: 800 MHz min/max: 800/3600 MHz Core speeds (MHz): 1: 800 2: 800 
           Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
           Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled 
           Type: mds mitigation: Clear CPU buffers; SMT disabled 
           Type: meltdown mitigation: PTI 
           Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp 
           Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
           Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, RSB filling 
           Type: srbds mitigation: Microcode 
           Type: tsx_async_abort mitigation: Clear CPU buffers; SMT disabled 
Graphics:  Device-1: Intel HD Graphics 530 vendor: Dell driver: N/A alternate: i915 bus-ID: 00:02.0 chip-ID: 8086:191b 
           class-ID: 0300 
           Device-2: NVIDIA GM107GLM [Quadro M1000M] vendor: Dell driver: nvidia v: 465.31 
           alternate: nouveau,nvidia_drm bus-ID: 01:00.0 chip-ID: 10de:13b1 class-ID: 0302 
           Device-3: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo bus-ID: 1-12:3 chip-ID: 0c45:6713 
           class-ID: 0e02 
           Display: server: X.org 1.20.11 driver: loaded: nvidia tty: 123x52 
           Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:     Device-1: Intel 100 Series/C230 Series Family HD Audio vendor: Dell driver: snd_hda_intel v: kernel 
           bus-ID: 00:1f.3 chip-ID: 8086:a170 class-ID: 0403 
           Sound Server-1: ALSA v: k5.12.8-arch1-1 running: yes 
           Sound Server-2: JACK v: 0.125.0 running: no 
           Sound Server-3: PulseAudio v: 14.2 running: no 
           Sound Server-4: PipeWire v: 0.3.28 running: no 
Network:   Device-1: Intel Wireless 8260 driver: iwlwifi v: kernel port: e000 bus-ID: 02:00.0 chip-ID: 8086:24f3 
           class-ID: 0280 
           IF: wlan0 state: up mac: <filter> 
Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-4:2 chip-ID: 8087:0a2b 
           class-ID: e001 
           Report: ID: hci0 state: down bt-service: enabled, running address: <filter> 
           Info: acl-mtu: 0:0 sco-mtu: 0:0 link-mode: slave accept 
Drives:    Local Storage: total: 476.94 GiB used: 6.91 GiB (1.4%) 
           SMART Message: Unable to run smartctl. Root privileges required. 
           ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: PM951 NVMe 512GB size: 476.94 GiB block-size: 
           physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4 rotation: SSD serial: <filter> rev: BXV77D0Q 
           scheme: GPT 
Partition: ID-1: / raw-size: 459.4 GiB size: 451.12 GiB (98.20%) used: 6.91 GiB (1.5%) fs: ext4 dev: /dev/nvme0n1p2 
           maj-min: 259:2 
           ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%) used: 280 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 
           maj-min: 259:1 
Swap:      Kernel: swappiness: 60 (default) cache-pressure: 100 (default) 
           ID-1: swap-1 type: partition size: 17.03 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/nvme0n1p3 
           maj-min: 259:3 
Sensors:   System Temperatures: cpu: 58.0 C mobo: N/A 
           Fan Speeds (RPM): cpu: 0 fan-2: 0 
Info:      Processes: 132 Uptime: 4m wakeups: 1 Memory: 15.48 GiB used: 511.3 MiB (3.2%) Init: systemd v: 248 
           tool: systemctl Compilers: gcc: 11.1.0 Packages: pacman: 827 lib: 248 Shell: Bash v: 5.1.8 
           running-in: tty pts/0 (SSH) inxi: 3.3.03 

Model: PM951 NVMe SAMSUNG 512GB (nvme)
Disk /dev/nvme0n1: 512GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags: 

Number  Start   End    Size    File system     Name  Flags
 1      2097kB  539MB  537MB   fat32                 boot, esp
 2      539MB   494GB  493GB   ext4                  legacy_boot
 3      494GB   512GB  18,3GB  linux-swap(v1)        swap
1 Like
20

OK one more please,

lsblk

1 Like