Gotta add that maybe I did things i’m not aware of since i’m newbie, was just trying to fix my wifi. My bluetooth also isn’t working since I passed the installation phase.
jul 11 19:42:21 loopz kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
jul 11 19:42:21 loopz kernel: NET: Registered PF_INET protocol family
jul 11 19:42:21 loopz kernel: IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
jul 11 19:42:21 loopz kernel: tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
jul 11 19:42:21 loopz kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
jul 11 19:42:21 loopz kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
jul 11 19:42:21 loopz kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
jul 11 19:42:21 loopz kernel: TCP: Hash tables configured (established 262144 bind 65536)
jul 11 19:42:21 loopz kernel: MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
jul 11 19:42:21 loopz kernel: UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
jul 11 19:42:21 loopz kernel: UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
jul 11 19:42:21 loopz kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
jul 11 19:42:21 loopz kernel: NET: Registered PF_XDP protocol family
jul 11 19:42:21 loopz kernel: pci 0000:01:00.0: BAR 7: assigned [mem 0xfc814000-0xfc853fff 64bit]
jul 11 19:42:21 loopz kernel: pci 0000:00:01.1: PCI bridge to [bus 01]
jul 11 19:42:21 loopz kernel: pci 0000:00:01.1: bridge window [mem 0xfc800000-0xfc8fffff]
jul 11 19:42:21 loopz kernel: pci 0000:03:00.0: PCI bridge to [bus 04]
jul 11 19:42:21 loopz kernel: pci 0000:03:01.0: PCI bridge to [bus 05]
jul 11 19:42:21 loopz kernel: pci 0000:03:02.0: PCI bridge to [bus 06]
jul 11 19:42:21 loopz kernel: pci 0000:03:03.0: PCI bridge to [bus 07]
jul 11 19:42:21 loopz kernel: pci 0000:03:04.0: PCI bridge to [bus 08]
jul 11 19:42:21 loopz kernel: pci 0000:03:05.0: PCI bridge to [bus 09]
jul 11 19:42:21 loopz kernel: pci 0000:03:06.0: PCI bridge to [bus 0a]
jul 11 19:42:21 loopz kernel: pci 0000:03:06.0: bridge window [io 0xe000-0xefff]
jul 11 19:42:21 loopz kernel: pci 0000:03:06.0: bridge window [mem 0xfc600000-0xfc6fffff]
jul 11 19:42:21 loopz kernel: pci 0000:03:07.0: PCI bridge to [bus 0b]
jul 11 19:42:21 loopz kernel: pci 0000:03:07.0: bridge window [io 0xd000-0xdfff]
jul 11 19:42:21 loopz kernel: pci 0000:03:07.0: bridge window [mem 0xfc500000-0xfc5fffff]
jul 11 19:42:21 loopz kernel: pci 0000:03:07.0: bridge window [mem 0xe2100000-0xe21fffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci 0000:02:00.2: PCI bridge to [bus 03-0b]
jul 11 19:42:21 loopz kernel: pci 0000:02:00.2: bridge window [io 0xd000-0xefff]
jul 11 19:42:21 loopz kernel: pci 0000:02:00.2: bridge window [mem 0xfc500000-0xfc6fffff]
jul 11 19:42:21 loopz kernel: pci 0000:02:00.2: bridge window [mem 0xe2100000-0xe21fffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci 0000:00:01.3: PCI bridge to [bus 02-0b]
jul 11 19:42:21 loopz kernel: pci 0000:00:01.3: bridge window [io 0xd000-0xefff]
jul 11 19:42:21 loopz kernel: pci 0000:00:01.3: bridge window [mem 0xfc500000-0xfc7fffff]
jul 11 19:42:21 loopz kernel: pci 0000:00:01.3: bridge window [mem 0xe2100000-0xe21fffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci 0000:00:03.1: PCI bridge to [bus 0c]
jul 11 19:42:21 loopz kernel: pci 0000:00:03.1: bridge window [io 0xf000-0xffff]
jul 11 19:42:21 loopz kernel: pci 0000:00:03.1: bridge window [mem 0xfb000000-0xfc0fffff]
jul 11 19:42:21 loopz kernel: pci 0000:00:03.1: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci 0000:00:07.1: PCI bridge to [bus 0d]
jul 11 19:42:21 loopz kernel: pci 0000:00:08.1: PCI bridge to [bus 0e]
jul 11 19:42:21 loopz kernel: pci 0000:00:08.1: bridge window [mem 0xfc200000-0xfc4fffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
jul 11 19:42:21 loopz kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
jul 11 19:42:21 loopz kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
jul 11 19:42:21 loopz kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
jul 11 19:42:21 loopz kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
jul 11 19:42:21 loopz kernel: pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
jul 11 19:42:21 loopz kernel: pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
jul 11 19:42:21 loopz kernel: pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfc8fffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xefff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:02: resource 1 [mem 0xfc500000-0xfc7fffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:02: resource 2 [mem 0xe2100000-0xe21fffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:03: resource 1 [mem 0xfc500000-0xfc6fffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:03: resource 2 [mem 0xe2100000-0xe21fffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0a: resource 0 [io 0xe000-0xefff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0a: resource 1 [mem 0xfc600000-0xfc6fffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0b: resource 0 [io 0xd000-0xdfff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0b: resource 1 [mem 0xfc500000-0xfc5fffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0b: resource 2 [mem 0xe2100000-0xe21fffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0c: resource 0 [io 0xf000-0xffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0c: resource 1 [mem 0xfb000000-0xfc0fffff]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
jul 11 19:42:21 loopz kernel: pci_bus 0000:0e: resource 1 [mem 0xfc200000-0xfc4fffff]
jul 11 19:42:21 loopz kernel: pci 0000:0c:00.1: extending delay after power-on from D3hot to 20 msec
jul 11 19:42:21 loopz kernel: pci 0000:0c:00.1: D0 power state depends on 0000:0c:00.0
jul 11 19:42:21 loopz kernel: PCI: CLS 64 bytes, default 64
jul 11 19:42:21 loopz kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
jul 11 19:42:21 loopz kernel: software IO TLB: mapped [mem 0x00000000af946000-0x00000000b3946000] (64MB)
jul 11 19:42:21 loopz kernel: Trying to unpack rootfs image as initramfs...
jul 11 19:42:21 loopz kernel: LVT offset 0 assigned for vector 0x400
jul 11 19:42:21 loopz kernel: perf: AMD IBS detected (0x000003ff)
jul 11 19:42:21 loopz kernel: Initialise system trusted keyrings
jul 11 19:42:21 loopz kernel: Key type blacklist registered
jul 11 19:42:21 loopz kernel: workingset: timestamp_bits=41 max_order=23 bucket_order=0
jul 11 19:42:21 loopz kernel: zbud: loaded
jul 11 19:42:21 loopz kernel: integrity: Platform Keyring initialized
jul 11 19:42:21 loopz kernel: integrity: Machine keyring initialized
jul 11 19:42:21 loopz kernel: Key type asymmetric registered
jul 11 19:42:21 loopz kernel: Asymmetric key parser 'x509' registered
jul 11 19:42:21 loopz kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
jul 11 19:42:21 loopz kernel: io scheduler mq-deadline registered
jul 11 19:42:21 loopz kernel: io scheduler kyber registered
jul 11 19:42:21 loopz kernel: io scheduler bfq registered
jul 11 19:42:21 loopz kernel: pcieport 0000:00:01.1: PME: Signaling with IRQ 26
jul 11 19:42:21 loopz kernel: pcieport 0000:00:01.1: AER: enabled with IRQ 26
jul 11 19:42:21 loopz kernel: pcieport 0000:00:01.3: PME: Signaling with IRQ 27
jul 11 19:42:21 loopz kernel: pcieport 0000:00:01.3: AER: enabled with IRQ 27
jul 11 19:42:21 loopz kernel: pcieport 0000:00:03.1: PME: Signaling with IRQ 28
jul 11 19:42:21 loopz kernel: pcieport 0000:00:03.1: AER: enabled with IRQ 28
jul 11 19:42:21 loopz kernel: pcieport 0000:00:07.1: PME: Signaling with IRQ 30
jul 11 19:42:21 loopz kernel: pcieport 0000:00:07.1: AER: enabled with IRQ 30
jul 11 19:42:21 loopz kernel: pcieport 0000:00:08.1: PME: Signaling with IRQ 31
jul 11 19:42:21 loopz kernel: pcieport 0000:00:08.1: AER: enabled with IRQ 31
jul 11 19:42:21 loopz kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
jul 11 19:42:21 loopz kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
jul 11 19:42:21 loopz kernel: ACPI: button: Power Button [PWRB]
jul 11 19:42:21 loopz kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
jul 11 19:42:21 loopz kernel: ACPI: button: Power Button [PWRF]
jul 11 19:42:21 loopz kernel: Estimated ratio of average max frequency by base frequency (times 1024): 1220
jul 11 19:42:21 loopz kernel: Monitor-Mwait will be used to enter C-1 state
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C000: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C002: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C004: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C006: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C008: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C00A: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C00C: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C00E: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C001: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C003: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C005: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C007: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C009: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C00B: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C00D: Found 2 idle states
jul 11 19:42:21 loopz kernel: ACPI: \_PR_.C00F: Found 2 idle states
jul 11 19:42:21 loopz kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
jul 11 19:42:21 loopz kernel: 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
jul 11 19:42:21 loopz kernel: Non-volatile memory driver v1.3
jul 11 19:42:21 loopz kernel: Linux agpgart interface v0.103
jul 11 19:42:21 loopz kernel: tpm_crb MSFT0101:00: Disabling hwrng
jul 11 19:42:21 loopz kernel: AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
jul 11 19:42:21 loopz kernel: ACPI: bus type drm_connector registered
jul 11 19:42:21 loopz kernel: ahci 0000:02:00.1: version 3.0
jul 11 19:42:21 loopz kernel: ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
jul 11 19:42:21 loopz kernel: ahci 0000:02:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
jul 11 19:42:21 loopz kernel: ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
jul 11 19:42:21 loopz kernel: scsi host0: ahci
jul 11 19:42:21 loopz kernel: scsi host1: ahci
jul 11 19:42:21 loopz kernel: scsi host2: ahci
jul 11 19:42:21 loopz kernel: scsi host3: ahci
jul 11 19:42:21 loopz kernel: scsi host4: ahci
jul 11 19:42:21 loopz kernel: scsi host5: ahci
jul 11 19:42:21 loopz kernel: scsi host6: ahci
jul 11 19:42:21 loopz kernel: scsi host7: ahci
jul 11 19:42:21 loopz kernel: ata1: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780100 irq 42
jul 11 19:42:21 loopz kernel: ata2: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780180 irq 42
jul 11 19:42:21 loopz kernel: ata3: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780200 irq 42
jul 11 19:42:21 loopz kernel: ata4: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780280 irq 42
jul 11 19:42:21 loopz kernel: ata5: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780300 irq 42
jul 11 19:42:21 loopz kernel: ata6: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780380 irq 42
jul 11 19:42:21 loopz kernel: ata7: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780400 irq 42
jul 11 19:42:21 loopz kernel: ata8: SATA max UDMA/133 abar m131072@0xfc780000 port 0xfc780480 irq 42
jul 11 19:42:21 loopz kernel: ahci 0000:0a:00.0: SSS flag set, parallel bus scan disabled
jul 11 19:42:21 loopz kernel: ahci 0000:0a:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
jul 11 19:42:21 loopz kernel: ahci 0000:0a:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc
jul 11 19:42:21 loopz kernel: scsi host8: ahci
jul 11 19:42:21 loopz kernel: scsi host9: ahci
jul 11 19:42:21 loopz kernel: ata9: SATA max UDMA/133 abar m512@0xfc600000 port 0xfc600100 irq 43
jul 11 19:42:21 loopz kernel: ata10: SATA max UDMA/133 abar m512@0xfc600000 port 0xfc600180 irq 43
jul 11 19:42:21 loopz kernel: usbcore: registered new interface driver usbserial_generic
jul 11 19:42:21 loopz kernel: usbserial: USB Serial support registered for generic
jul 11 19:42:21 loopz kernel: rtc_cmos 00:03: RTC can wake from S4
jul 11 19:42:21 loopz kernel: rtc_cmos 00:03: registered as rtc0
jul 11 19:42:21 loopz kernel: rtc_cmos 00:03: setting system clock to 2024-07-11T22:42:18 UTC (1720737738)
jul 11 19:42:21 loopz kernel: rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram
jul 11 19:42:21 loopz kernel: amd_pstate: driver load is disabled, boot with specific mode to enable this
jul 11 19:42:21 loopz kernel: ledtrig-cpu: registered to indicate activity on CPUs
jul 11 19:42:21 loopz kernel: efifb: probing for efifb
jul 11 19:42:21 loopz kernel: efifb: framebuffer at 0xd0000000, using 8100k, total 8100k
jul 11 19:42:21 loopz kernel: efifb: mode is 1920x1080x32, linelength=7680, pages=1
jul 11 19:42:21 loopz kernel: efifb: scrolling: redraw
jul 11 19:42:21 loopz kernel: efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
jul 11 19:42:21 loopz kernel: fbcon: Deferring console take-over
jul 11 19:42:21 loopz kernel: fb0: EFI VGA frame buffer device
jul 11 19:42:21 loopz kernel: hid: raw HID events driver (C) Jiri Kosina
jul 11 19:42:21 loopz kernel: drop_monitor: Initializing network drop monitor service
jul 11 19:42:21 loopz kernel: Initializing XFRM netlink socket
jul 11 19:42:21 loopz kernel: NET: Registered PF_INET6 protocol family
jul 11 19:42:21 loopz kernel: Freeing initrd memory: 97788K
jul 11 19:42:21 loopz kernel: Segment Routing with IPv6
jul 11 19:42:21 loopz kernel: RPL Segment Routing with IPv6
jul 11 19:42:21 loopz kernel: In-situ OAM (IOAM) with IPv6
jul 11 19:42:21 loopz kernel: NET: Registered PF_PACKET protocol family
jul 11 19:42:21 loopz kernel: microcode: CPU0: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU2: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU3: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU6: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU8: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU5: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU4: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU7: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU9: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU10: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU11: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU1: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU12: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU13: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU14: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: CPU15: patch_level=0x0a20120e
jul 11 19:42:21 loopz kernel: microcode: Microcode Update Driver: v2.2.
jul 11 19:42:21 loopz kernel: resctrl: L3 allocation detected
jul 11 19:42:21 loopz kernel: resctrl: MB allocation detected
jul 11 19:42:21 loopz kernel: resctrl: L3 monitoring detected
jul 11 19:42:21 loopz kernel: IPI shorthand broadcast: enabled
jul 11 19:42:21 loopz kernel: sched_clock: Marking stable (540007602, 255260)->(556056501, -15793639)
jul 11 19:42:21 loopz kernel: registered taskstats version 1
jul 11 19:42:21 loopz kernel: Loading compiled-in X.509 certificates
jul 11 19:42:21 loopz kernel: Loaded X.509 cert 'Build time autogenerated kernel key: a9dab79398e058d5fb31732224f25766cb1a0700'
jul 11 19:42:21 loopz kernel: zswap: loaded using pool zstd/zsmalloc
jul 11 19:42:21 loopz kernel: Key type .fscrypt registered
jul 11 19:42:21 loopz kernel: Key type fscrypt-provisioning registered
jul 11 19:42:21 loopz kernel: integrity: Loading X.509 certificate: UEFI:db
jul 11 19:42:21 loopz kernel: integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
jul 11 19:42:21 loopz kernel: integrity: Loading X.509 certificate: UEFI:db
jul 11 19:42:21 loopz kernel: integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
jul 11 19:42:21 loopz kernel: PM: Magic number: 0:851:754
jul 11 19:42:21 loopz kernel: ata_link link5: hash matches
jul 11 19:42:21 loopz kernel: link5: hash matches
jul 11 19:42:21 loopz kernel: tty ttyS5: hash matches
jul 11 19:42:21 loopz kernel: RAS: Correctable Errors collector initialized.
jul 11 19:42:21 loopz kernel: ata9: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
jul 11 19:42:21 loopz kernel: ata1.00: ATA-10: SanDisk SSD PLUS 1000GB, UH4504RL, max UDMA/133
jul 11 19:42:21 loopz kernel: ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32)
jul 11 19:42:21 loopz kernel: ata1.00: Features: Dev-Sleep
jul 11 19:42:21 loopz kernel: ata1.00: configured for UDMA/133
jul 11 19:42:21 loopz kernel: scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 04RL PQ: 0 ANSI: 5
jul 11 19:42:21 loopz kernel: sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
jul 11 19:42:21 loopz kernel: sd 0:0:0:0: [sda] Write Protect is off
jul 11 19:42:21 loopz kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
jul 11 19:42:21 loopz kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
jul 11 19:42:21 loopz kernel: sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
jul 11 19:42:21 loopz kernel: sda: sda1 sda2
jul 11 19:42:21 loopz kernel: sd 0:0:0:0: [sda] Attached SCSI disk
jul 11 19:42:21 loopz kernel: ata2: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: tsc: Refined TSC clocksource calibration: 2994.374 MHz
jul 11 19:42:21 loopz kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b29828a32c, max_idle_ns: 440795270613 ns
jul 11 19:42:21 loopz kernel: clocksource: Switched to clocksource tsc
jul 11 19:42:21 loopz kernel: ata3: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: ata4: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: ata5: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: ata6: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: ata7: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: ata8: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: ata10: SATA link down (SStatus 0 SControl 300)
jul 11 19:42:21 loopz kernel: clk: Disabling unused clocks
jul 11 19:42:21 loopz kernel: Freeing unused decrypted memory: 2028K
jul 11 19:42:21 loopz kernel: Freeing unused kernel image (initmem) memory: 3420K
jul 11 19:42:21 loopz kernel: Write protecting the kernel read-only data: 30720k
jul 11 19:42:21 loopz kernel: Freeing unused kernel image (rodata/data gap) memory: 1316K
jul 11 19:42:21 loopz kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
jul 11 19:42:21 loopz kernel: rodata_test: all tests were successful
jul 11 19:42:21 loopz kernel: Run /init as init process
jul 11 19:42:21 loopz kernel: with arguments:
jul 11 19:42:21 loopz kernel: /init
jul 11 19:42:21 loopz kernel: with environment:
jul 11 19:42:21 loopz kernel: HOME=/
jul 11 19:42:21 loopz kernel: TERM=linux
jul 11 19:42:21 loopz kernel: nvme_load=YES
jul 11 19:42:21 loopz systemd[1]: Successfully made /usr/ read-only.
jul 11 19:42:21 loopz systemd[1]: systemd 256.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
jul 11 19:42:21 loopz systemd[1]: Detected architecture x86-64.
jul 11 19:42:21 loopz systemd[1]: Running in initrd.
jul 11 19:42:21 loopz kernel: fbcon: Taking over console
jul 11 19:42:21 loopz kernel: Console: switching to colour frame buffer device 240x67
jul 11 19:42:21 loopz systemd[1]: Hostname set to <loopz>.
jul 11 19:42:21 loopz systemd[1]: Queued start job for default target Initrd Default Target.
jul 11 19:42:21 loopz systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
jul 11 19:42:21 loopz systemd[1]: Expecting device /dev/disk/by-uuid/0619913a-9aad-4f73-8f6f-56f5c815c99f...
jul 11 19:42:21 loopz systemd[1]: Expecting device /dev/disk/by-uuid/2fa1c21f-8991-4be8-a4e7-0ac469e17972...
jul 11 19:42:21 loopz systemd[1]: Reached target Initrd /usr File System.
jul 11 19:42:21 loopz systemd[1]: Reached target Path Units.
jul 11 19:42:21 loopz systemd[1]: Reached target Slice Units.
jul 11 19:42:21 loopz systemd[1]: Reached target Swaps.
jul 11 19:42:21 loopz systemd[1]: Reached target Timer Units.
jul 11 19:42:21 loopz systemd[1]: Listening on Journal Socket (/dev/log).
jul 11 19:42:21 loopz systemd[1]: Listening on Journal Sockets.
jul 11 19:42:21 loopz systemd[1]: Listening on udev Control Socket.
jul 11 19:42:21 loopz systemd[1]: Listening on udev Kernel Socket.
jul 11 19:42:21 loopz systemd[1]: Reached target Socket Units.
jul 11 19:42:21 loopz systemd[1]: Starting Create List of Static Device Nodes...
jul 11 19:42:21 loopz systemd[1]: Starting Journal Service...
jul 11 19:42:21 loopz systemd[1]: Starting Load Kernel Modules...
jul 11 19:42:21 loopz systemd[1]: Starting Virtual Console Setup...
jul 11 19:42:21 loopz systemd[1]: Finished Create List of Static Device Nodes.
jul 11 19:42:21 loopz systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
jul 11 19:42:21 loopz systemd[1]: Finished Virtual Console Setup.
jul 11 19:42:21 loopz systemd[1]: dracut ask for additional cmdline parameters was skipped because no trigger condition checks were met.
jul 11 19:42:21 loopz systemd[1]: Starting dracut cmdline hook...
jul 11 19:42:21 loopz systemd-journald[251]: Collecting audit messages is disabled.
jul 11 19:42:21 loopz kernel: i2c_dev: i2c /dev entries driver
jul 11 19:42:21 loopz systemd[1]: Finished Create Static Device Nodes in /dev gracefully.
jul 11 19:42:21 loopz systemd[1]: Starting Create System Users...
jul 11 19:42:21 loopz systemd[1]: Finished Create System Users.
jul 11 19:42:21 loopz systemd[1]: Starting Create Static Device Nodes in /dev...
jul 11 19:42:21 loopz systemd[1]: Finished Create Static Device Nodes in /dev.
jul 11 19:42:21 loopz systemd[1]: Started Journal Service.
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:02:00.0: xHCI Host Controller
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
jul 11 19:42:21 loopz kernel: sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
jul 11 19:42:21 loopz kernel: sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
jul 11 19:42:21 loopz kernel: sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
jul 11 19:42:21 loopz kernel: ccp 0000:0e:00.1: enabling device (0000 -> 0002)
jul 11 19:42:21 loopz kernel: ccp 0000:0e:00.1: ccp: unable to access the device: you might be running a broken BIOS.
jul 11 19:42:21 loopz kernel: ccp 0000:0e:00.1: psp enabled
jul 11 19:42:21 loopz kernel: cryptd: max_cpu_qlen set to 1000
jul 11 19:42:21 loopz kernel: nvme nvme0: pci function 0000:01:00.0
jul 11 19:42:21 loopz kernel: AVX2 version of gcm_enc/dec engaged.
jul 11 19:42:21 loopz kernel: AES CTR mode by8 optimization enabled
jul 11 19:42:21 loopz kernel: nvme nvme0: missing or invalid SUBNQN field.
jul 11 19:42:21 loopz kernel: nvme nvme0: allocated 128 MiB host memory buffer.
jul 11 19:42:21 loopz kernel: nvme nvme0: 8/0/0 default/read/poll queues
jul 11 19:42:21 loopz kernel: nvme0n1: p1 p2 p3
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010008000410
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:02:00.0: xHCI Host Controller
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
jul 11 19:42:21 loopz kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
jul 11 19:42:21 loopz kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
jul 11 19:42:21 loopz kernel: usb usb1: Product: xHCI Host Controller
jul 11 19:42:21 loopz kernel: usb usb1: Manufacturer: Linux 6.6.38-1-lts xhci-hcd
jul 11 19:42:21 loopz kernel: usb usb1: SerialNumber: 0000:02:00.0
jul 11 19:42:21 loopz kernel: hub 1-0:1.0: USB hub found
jul 11 19:42:21 loopz kernel: hub 1-0:1.0: 14 ports detected
jul 11 19:42:21 loopz kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
jul 11 19:42:21 loopz kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
jul 11 19:42:21 loopz kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
jul 11 19:42:21 loopz kernel: usb usb2: Product: xHCI Host Controller
jul 11 19:42:21 loopz kernel: usb usb2: Manufacturer: Linux 6.6.38-1-lts xhci-hcd
jul 11 19:42:21 loopz kernel: usb usb2: SerialNumber: 0000:02:00.0
jul 11 19:42:21 loopz kernel: hub 2-0:1.0: USB hub found
jul 11 19:42:21 loopz kernel: hub 2-0:1.0: 8 ports detected
jul 11 19:42:21 loopz kernel: usb: port power management may be unreliable
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:0e:00.3: xHCI Host Controller
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:0e:00.3: new USB bus registered, assigned bus number 3
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:0e:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:0e:00.3: xHCI Host Controller
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:0e:00.3: new USB bus registered, assigned bus number 4
jul 11 19:42:21 loopz kernel: xhci_hcd 0000:0e:00.3: Host supports USB 3.1 Enhanced SuperSpeed
jul 11 19:42:21 loopz kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
jul 11 19:42:21 loopz kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
jul 11 19:42:21 loopz kernel: usb usb3: Product: xHCI Host Controller
jul 11 19:42:21 loopz kernel: usb usb3: Manufacturer: Linux 6.6.38-1-lts xhci-hcd
jul 11 19:42:21 loopz kernel: usb usb3: SerialNumber: 0000:0e:00.3
jul 11 19:42:21 loopz kernel: hub 3-0:1.0: USB hub found
jul 11 19:42:21 loopz kernel: hub 3-0:1.0: 4 ports detected
jul 11 19:42:21 loopz kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
jul 11 19:42:21 loopz kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.06
jul 11 19:42:21 loopz kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
jul 11 19:42:21 loopz kernel: usb usb4: Product: xHCI Host Controller
jul 11 19:42:21 loopz kernel: usb usb4: Manufacturer: Linux 6.6.38-1-lts xhci-hcd
jul 11 19:42:21 loopz kernel: usb usb4: SerialNumber: 0000:0e:00.3
jul 11 19:42:21 loopz kernel: hub 4-0:1.0: USB hub found
jul 11 19:42:21 loopz kernel: hub 4-0:1.0: 4 ports detected
jul 11 19:42:21 loopz kernel: PM: Image not found (code -22)
jul 11 19:42:22 loopz kernel: usb 1-2: new full-speed USB device number 2 using xhci_hcd
jul 11 19:42:22 loopz kernel: usb 3-2: new low-speed USB device number 2 using xhci_hcd
jul 11 19:42:22 loopz kernel: nvidia: loading out-of-tree module taints kernel.
jul 11 19:42:22 loopz kernel: nvidia: module license 'NVIDIA' taints kernel.
jul 11 19:42:22 loopz kernel: Disabling lock debugging due to kernel taint
jul 11 19:42:22 loopz kernel: nvidia: module verification failed: signature and/or required key missing - tainting kernel
jul 11 19:42:22 loopz kernel: nvidia: module license taints kernel.
jul 11 19:42:22 loopz kernel: usb 3-2: New USB device found, idVendor=0e8f, idProduct=0022, bcdDevice= 2.10
jul 11 19:42:22 loopz kernel: usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
jul 11 19:42:22 loopz kernel: usb 3-2: Product: USB KB V11
jul 11 19:42:22 loopz kernel: usb 3-2: Manufacturer: GASIA
jul 11 19:42:22 loopz kernel: usb 1-2: New USB device found, idVendor=1ea7, idProduct=0064, bcdDevice= 2.00
jul 11 19:42:22 loopz kernel: usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
jul 11 19:42:22 loopz kernel: usb 1-2: Product: 2.4G Mouse
jul 11 19:42:22 loopz kernel: usb 3-3: new full-speed USB device number 3 using xhci_hcd
jul 11 19:42:22 loopz kernel: usb 1-9: new full-speed USB device number 3 using xhci_hcd
jul 11 19:42:22 loopz kernel: nvidia-nvlink: Nvlink Core is being initialized, major device number 235
jul 11 19:42:22 loopz kernel:
jul 11 19:42:22 loopz kernel: nvidia 0000:0c:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
jul 11 19:42:22 loopz kernel: NVRM: loading NVIDIA UNIX x86_64 Kernel Module 555.58.02 Tue Jun 25 01:39:15 UTC 2024
jul 11 19:42:22 loopz kernel: usb 3-3: New USB device found, idVendor=248a, idProduct=8367, bcdDevice= 1.00
jul 11 19:42:22 loopz kernel: usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
jul 11 19:42:22 loopz kernel: usb 3-3: Product: Wireless Receiver
jul 11 19:42:22 loopz kernel: usb 3-3: Manufacturer: Telink
jul 11 19:42:22 loopz kernel: nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
jul 11 19:42:22 loopz kernel: nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 555.58.02 Tue Jun 25 01:10:21 UTC 2024
jul 11 19:42:22 loopz kernel: [drm] [nvidia-drm] [GPU ID 0x00000c00] Loading driver
jul 11 19:42:22 loopz kernel: usb 3-4: new high-speed USB device number 4 using xhci_hcd
jul 11 19:42:22 loopz kernel: EXT4-fs (nvme0n1p2): mounted filesystem 2fa1c21f-8991-4be8-a4e7-0ac469e17972 r/w with ordered data mode. Quota mode: none.
jul 11 19:42:22 loopz kernel: usb 1-9: New USB device found, idVendor=8087, idProduct=0032, bcdDevice= 0.00
jul 11 19:42:22 loopz kernel: usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
jul 11 19:42:22 loopz kernel: input: GASIA USB KB V11 as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.0/0003:0E8F:0022.0001/input/input2
jul 11 19:42:22 loopz kernel: usb 3-4: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
jul 11 19:42:22 loopz kernel: usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
jul 11 19:42:22 loopz kernel: usb 3-4: Product: 802.11n NIC
jul 11 19:42:22 loopz kernel: usb 3-4: Manufacturer: Realtek
jul 11 19:42:22 loopz kernel: usb 3-4: SerialNumber: 00E04C0001
jul 11 19:42:22 loopz kernel: hid-generic 0003:0E8F:0022.0001: input,hidraw0: USB HID v1.10 Keyboard [GASIA USB KB V11] on usb-0000:0e:00.3-2/input0
jul 11 19:42:22 loopz kernel: input: GASIA USB KB V11 Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.1/0003:0E8F:0022.0002/input/input3
jul 11 19:42:23 loopz kernel: input: GASIA USB KB V11 System Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-2/3-2:1.1/0003:0E8F:0022.0002/input/input4
jul 11 19:42:23 loopz kernel: hid-generic 0003:0E8F:0022.0002: input,hidraw1: USB HID v1.10 Device [GASIA USB KB V11] on usb-0000:0e:00.3-2/input1
jul 11 19:42:23 loopz kernel: input: 2.4G Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-2/1-2:1.0/0003:1EA7:0064.0003/input/input5
jul 11 19:42:23 loopz kernel: input: 2.4G Mouse as /devices/pci0000:00/0000:00:01.3/0000:02:00.0/usb1/1-2/1-2:1.0/0003:1EA7:0064.0003/input/input6
jul 11 19:42:23 loopz kernel: hid-generic 0003:1EA7:0064.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [2.4G Mouse] on usb-0000:02:00.0-2/input0
jul 11 19:42:23 loopz kernel: input: Telink Wireless Receiver Mouse as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-3/3-3:1.0/0003:248A:8367.0004/input/input7
jul 11 19:42:23 loopz kernel: input: Telink Wireless Receiver Consumer Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-3/3-3:1.0/0003:248A:8367.0004/input/input8
jul 11 19:42:23 loopz kernel: input: Telink Wireless Receiver System Control as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-3/3-3:1.0/0003:248A:8367.0004/input/input9
jul 11 19:42:23 loopz kernel: hid-generic 0003:248A:8367.0004: input,hidraw3: USB HID v1.11 Mouse [Telink Wireless Receiver] on usb-0000:0e:00.3-3/input0
jul 11 19:42:23 loopz kernel: input: Telink Wireless Receiver as /devices/pci0000:00/0000:00:08.1/0000:0e:00.3/usb3/3-3/3-3:1.1/0003:248A:8367.0005/input/input10
jul 11 19:42:23 loopz kernel: hid-generic 0003:248A:8367.0005: input,hidraw4: USB HID v1.11 Keyboard [Telink Wireless Receiver] on usb-0000:0e:00.3-3/input1
jul 11 19:42:23 loopz kernel: usbcore: registered new interface driver usbhid
jul 11 19:42:23 loopz kernel: usbhid: USB HID core driver
jul 11 19:42:24 loopz kernel: nvidia-uvm: Loaded the UVM driver, major device number 511.
jul 11 19:42:24 loopz kernel: Asymmetric key parser 'pkcs8' registered
jul 11 19:42:24 loopz kernel: [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:0c:00.0 on minor 0
jul 11 19:42:25 loopz systemd-journald[251]: Received SIGTERM from PID 1 (systemd).
jul 11 19:42:25 loopz systemd[1]: systemd 256.2-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
jul 11 19:42:25 loopz systemd[1]: Detected architecture x86-64.
jul 11 19:42:25 loopz kernel: systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
jul 11 19:42:25 loopz systemd[1]: bpf-restrict-fs: LSM BPF program attached
jul 11 19:42:25 loopz systemd[1]: run-credentials-systemd\x2djournald.service.mount: Deactivated successfully.
jul 11 19:42:25 loopz systemd[1]: initrd-switch-root.service: Deactivated successfully.
jul 11 19:42:25 loopz systemd[1]: Stopped Switch Root.
jul 11 19:42:25 loopz systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/dirmngr.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/getty.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/gpg-agent.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/gpg-agent-browser.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/gpg-agent-extra.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/gpg-agent-ssh.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/keyboxd.
jul 11 19:42:25 loopz systemd[1]: Created slice Slice /system/systemd-fsck.
jul 11 19:42:25 loopz systemd[1]: Created slice User and Session Slice.
jul 11 19:42:25 loopz systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
jul 11 19:42:25 loopz systemd[1]: Started Forward Password Requests to Wall Directory Watch.
jul 11 19:42:25 loopz systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
jul 11 19:42:25 loopz systemd[1]: Expecting device /dev/disk/by-uuid/0619913a-9aad-4f73-8f6f-56f5c815c99f...
jul 11 19:42:25 loopz systemd[1]: Expecting device /dev/disk/by-uuid/834E-F2E0...
jul 11 19:42:25 loopz systemd[1]: Reached target Local Encrypted Volumes.
jul 11 19:42:25 loopz systemd[1]: Reached target Login Prompts.
jul 11 19:42:25 loopz systemd[1]: Stopped target Switch Root.
jul 11 19:42:25 loopz systemd[1]: Stopped target Initrd File Systems.
jul 11 19:42:25 loopz systemd[1]: Stopped target Initrd Root File System.
jul 11 19:42:25 loopz systemd[1]: Reached target Local Integrity Protected Volumes.
jul 11 19:42:25 loopz systemd[1]: Reached target Remote File Systems.
jul 11 19:42:25 loopz systemd[1]: Reached target Slice Units.
jul 11 19:42:25 loopz systemd[1]: Reached target Local Verity Protected Volumes.
jul 11 19:42:25 loopz systemd[1]: Listening on Device-mapper event daemon FIFOs.
jul 11 19:42:25 loopz systemd[1]: Listening on LVM2 poll daemon socket.
jul 11 19:42:25 loopz systemd[1]: Listening on Process Core Dump Socket.
jul 11 19:42:25 loopz systemd[1]: Listening on Credential Encryption/Decryption.
jul 11 19:42:25 loopz systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
jul 11 19:42:25 loopz systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
jul 11 19:42:25 loopz systemd[1]: Listening on udev Control Socket.
jul 11 19:42:25 loopz systemd[1]: Listening on udev Kernel Socket.
jul 11 19:42:25 loopz systemd[1]: Listening on User Database Manager Socket.
jul 11 19:42:25 loopz systemd[1]: Mounting Huge Pages File System...
jul 11 19:42:25 loopz systemd[1]: Mounting POSIX Message Queue File System...
jul 11 19:42:25 loopz systemd[1]: Mounting Kernel Debug File System...
jul 11 19:42:25 loopz systemd[1]: Mounting Kernel Trace File System...
jul 11 19:42:25 loopz systemd[1]: Starting Create List of Static Device Nodes...
jul 11 19:42:25 loopz systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
jul 11 19:42:25 loopz systemd[1]: Starting Load Kernel Module configfs...
jul 11 19:42:25 loopz systemd[1]: Starting Load Kernel Module dm_mod...
jul 11 19:42:25 loopz systemd[1]: Starting Load Kernel Module drm...
jul 11 19:42:25 loopz systemd[1]: Starting Load Kernel Module fuse...
jul 11 19:42:25 loopz systemd[1]: Starting Load Kernel Module loop...
jul 11 19:42:25 loopz systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
jul 11 19:42:25 loopz systemd[1]: Starting Journal Service...
jul 11 19:42:25 loopz systemd[1]: Starting Load Kernel Modules...
jul 11 19:42:25 loopz systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
jul 11 19:42:25 loopz systemd[1]: Starting Remount Root and Kernel File Systems...
jul 11 19:42:25 loopz systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
jul 11 19:42:25 loopz systemd[1]: Starting Load udev Rules from Credentials...
jul 11 19:42:25 loopz systemd[1]: Starting Coldplug All udev Devices...
jul 11 19:42:25 loopz systemd[1]: Mounted Huge Pages File System.
jul 11 19:42:25 loopz systemd[1]: Mounted POSIX Message Queue File System.
jul 11 19:42:25 loopz systemd[1]: Mounted Kernel Debug File System.
jul 11 19:42:25 loopz systemd[1]: Mounted Kernel Trace File System.
jul 11 19:42:25 loopz kernel: loop: module loaded
jul 11 19:42:25 loopz kernel: fuse: init (API version 7.39)
jul 11 19:42:25 loopz kernel: device-mapper: uevent: version 1.0.3
jul 11 19:42:25 loopz kernel: device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
jul 11 19:42:25 loopz systemd-journald[489]: Collecting audit messages is disabled.
jul 11 19:42:25 loopz systemd[1]: Finished Create List of Static Device Nodes.
jul 11 19:42:25 loopz kernel: EXT4-fs (nvme0n1p2): re-mounted 2fa1c21f-8991-4be8-a4e7-0ac469e17972 r/w. Quota mode: none.
jul 11 19:42:25 loopz systemd[1]: Started Journal Service.
jul 11 19:42:25 loopz systemd-journald[489]: Received client request to flush runtime journal.
jul 11 19:42:26 loopz kernel: mousedev: PS/2 mouse device common for all mice
jul 11 19:42:26 loopz kernel: Adding 36068352k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:36068352k SS
jul 11 19:42:26 loopz kernel: piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
jul 11 19:42:26 loopz kernel: piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
jul 11 19:42:26 loopz kernel: piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
jul 11 19:42:26 loopz kernel: input: PC Speaker as /devices/platform/pcspkr/input/input11
jul 11 19:42:26 loopz kernel: Bluetooth: Core ver 2.22
jul 11 19:42:26 loopz kernel: NET: Registered PF_BLUETOOTH protocol family
jul 11 19:42:26 loopz kernel: Bluetooth: HCI device and connection manager initialized
jul 11 19:42:26 loopz kernel: Bluetooth: HCI socket layer initialized
jul 11 19:42:26 loopz kernel: Bluetooth: L2CAP socket layer initialized
jul 11 19:42:26 loopz kernel: Bluetooth: SCO socket layer initialized
jul 11 19:42:26 loopz kernel: RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
jul 11 19:42:26 loopz kernel: RAPL PMU: hw unit of domain package 2^-16 Joules
jul 11 19:42:26 loopz kernel: cfg80211: Loading compiled-in X.509 certificates for regulatory database
jul 11 19:42:26 loopz kernel: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
jul 11 19:42:26 loopz kernel: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
jul 11 19:42:26 loopz kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
jul 11 19:42:26 loopz kernel: cfg80211: failed to load regulatory.db
jul 11 19:42:26 loopz kernel: usbcore: registered new interface driver btusb
jul 11 19:42:26 loopz kernel: r8169 0000:0b:00.0 eth0: RTL8168g/8111g, a8:a1:59:18:ed:99, XID 4c0, IRQ 76
jul 11 19:42:26 loopz kernel: r8169 0000:0b:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
jul 11 19:42:26 loopz kernel: Bluetooth: hci0: Firmware timestamp 2024.18 buildtype 1 build 81528
jul 11 19:42:26 loopz kernel: Bluetooth: hci0: No support for _PRR ACPI method
jul 11 19:42:26 loopz kernel: r8169 0000:0b:00.0 enp11s0: renamed from eth0
jul 11 19:42:26 loopz kernel: Bluetooth: hci0: Found device firmware: intel/ibt-0041-0041.sfi
jul 11 19:42:26 loopz kernel: Bluetooth: hci0: Boot Address: 0x100800
jul 11 19:42:26 loopz kernel: Bluetooth: hci0: Firmware Version: 120-18.24
jul 11 19:42:26 loopz kernel: Bluetooth: hci0: Firmware already loaded
jul 11 19:42:26 loopz kernel: kvm_amd: TSC scaling supported
jul 11 19:42:26 loopz kernel: kvm_amd: Nested Virtualization enabled
jul 11 19:42:26 loopz kernel: kvm_amd: Nested Paging enabled
jul 11 19:42:26 loopz kernel: kvm_amd: LBR virtualization supported
jul 11 19:42:26 loopz kernel: kvm_amd: Virtual VMLOAD VMSAVE supported
jul 11 19:42:26 loopz kernel: kvm_amd: Virtual GIF supported
jul 11 19:42:26 loopz kernel: snd_hda_intel 0000:0c:00.1: Disabling MSI
jul 11 19:42:26 loopz kernel: snd_hda_intel 0000:0c:00.1: Handle vga_switcheroo audio client
jul 11 19:42:26 loopz kernel: snd_hda_intel 0000:0e:00.4: enabling device (0000 -> 0002)
jul 11 19:42:26 loopz kernel: MCE: In-kernel MCE decoding enabled.
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: inputs:
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
jul 11 19:42:26 loopz kernel: snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
jul 11 19:42:26 loopz kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:0c:00.1/sound/card0/input12
jul 11 19:42:26 loopz kernel: input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:0c:00.1/sound/card0/input13
jul 11 19:42:26 loopz kernel: input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:0c:00.1/sound/card0/input14
jul 11 19:42:26 loopz kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:0c:00.1/sound/card0/input15
jul 11 19:42:26 loopz kernel: input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input16
jul 11 19:42:26 loopz kernel: input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input17
jul 11 19:42:26 loopz kernel: input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input18
jul 11 19:42:26 loopz kernel: input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input19
jul 11 19:42:26 loopz kernel: input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:0e:00.4/sound/card1/input20
jul 11 19:42:26 loopz kernel: intel_rapl_common: Found RAPL domain package
jul 11 19:42:26 loopz kernel: intel_rapl_common: Found RAPL domain core
jul 11 19:42:26 loopz kernel: usb 3-4: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
jul 11 19:42:27 loopz kernel: usb 3-4: RTL8188EU MAC: d0:37:45:9d:ef:23
jul 11 19:42:27 loopz kernel: usb 3-4: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
jul 11 19:42:27 loopz kernel: usb 3-4: Firmware revision 28.0 (signature 0x88e1)
jul 11 19:42:27 loopz kernel: Generic FE-GE Realtek PHY r8169-0-b00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-b00:00, irq=MAC)
jul 11 19:42:27 loopz kernel: r8169 0000:0b:00.0 enp11s0: Link is Down
jul 11 19:42:27 loopz kernel: usbcore: registered new interface driver rtl8xxxu
jul 11 19:42:29 loopz kernel: wlan0: authenticate with 24:e4:ce:2e:db:4b
jul 11 19:42:29 loopz kernel: wlan0: send auth to 24:e4:ce:2e:db:4b (try 1/3)
jul 11 19:42:29 loopz kernel: wlan0: authenticated
jul 11 19:42:29 loopz kernel: wlan0: associate with 24:e4:ce:2e:db:4b (try 1/3)
jul 11 19:42:29 loopz kernel: wlan0: RX AssocResp from 24:e4:ce:2e:db:4b (capab=0x1411 status=0 aid=17)
jul 11 19:42:29 loopz kernel: usb 3-4: rtl8xxxu_bss_info_changed: HT supported
jul 11 19:42:29 loopz kernel: wlan0: associated
jul 11 19:42:29 loopz kernel: wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:e4:ce:2e:db:4b
jul 11 19:42:33 loopz kernel: warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
jul 11 20:04:20 loopz kernel: NET: Registered PF_ALG protocol family
jul 11 20:04:26 loopz kernel: block nvme0n1: the capability attribute has been deprecated.
jul 11 21:31:05 loopz kernel: xwaylandv:zfq0[1326]: segfault at c0 ip 00007a4cd9efe965 sp 00007a4cd87fe488 error 4 in libnvidia-glcore.so.555.58.02[7a4cd9600000+c00000] likely on CPU 8 (core 0, socket 0)
jul 11 21:31:05 loopz kernel: Code: 30 48 8b 49 10 48 8b 49 58 8b 49 60 41 89 48 38 83 f8 08 74 52 48 8d 04 c0 48 8b 84 c6 70 01 00 00 48 85 c0 74 41 48 8b 48 10 <48> 8b 89 c0 00 00 00 41 c6 40 40 01 48 8b 70 10 49 89 70 48 8b 89
jul 11 21:36:51 loopz kernel: usb 3-4: USB disconnect, device number 4
jul 11 21:36:51 loopz kernel: wlan0: deauthenticating from 24:e4:ce:2e:db:4b by local choice (Reason: 3=DEAUTH_LEAVING)
jul 11 21:36:51 loopz kernel: usb 3-4: disconnecting
jul 11 21:37:41 loopz kernel: usb 3-4: new high-speed USB device number 5 using xhci_hcd
jul 11 21:37:41 loopz kernel: usb 3-4: New USB device found, idVendor=0bda, idProduct=8179, bcdDevice= 0.00
jul 11 21:37:42 loopz kernel: usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
jul 11 21:37:42 loopz kernel: usb 3-4: Product: 802.11n NIC
jul 11 21:37:42 loopz kernel: usb 3-4: Manufacturer: Realtek
jul 11 21:37:42 loopz kernel: usb 3-4: SerialNumber: 00E04C0001
jul 11 21:37:42 loopz kernel: usb 3-4: RTL8188EU rev D (TSMC) romver 0, 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0
jul 11 21:37:42 loopz kernel: usb 3-4: RTL8188EU MAC: d0:37:45:9d:ef:23
jul 11 21:37:42 loopz kernel: usb 3-4: rtl8xxxu: Loading firmware rtlwifi/rtl8188eufw.bin
jul 11 21:37:42 loopz kernel: usb 3-4: Firmware revision 28.0 (signature 0x88e1)
jul 11 21:37:44 loopz kernel: wlan0: authenticate with 24:e4:ce:2e:db:4b
jul 11 21:37:44 loopz kernel: wlan0: send auth to 24:e4:ce:2e:db:4b (try 1/3)
jul 11 21:37:44 loopz kernel: wlan0: authenticated
jul 11 21:37:44 loopz kernel: wlan0: associate with 24:e4:ce:2e:db:4b (try 1/3)
jul 11 21:37:44 loopz kernel: wlan0: RX AssocResp from 24:e4:ce:2e:db:4b (capab=0x1411 status=0 aid=33)
jul 11 21:37:44 loopz kernel: usb 3-4: rtl8xxxu_bss_info_changed: HT supported
jul 11 21:37:44 loopz kernel: wlan0: associated
jul 11 21:37:44 loopz kernel: wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 24:e4:ce:2e:db:4b