Auch Updateproblem

Hallo,
hatte grad per yay ein Update angestossen und es kommen folgende Fehlermeldungen:

Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von mirror.ubrco.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'qt5-declarative-5.15.9+kde+r26-1-x86_64.pkg.tar.zst' nicht von mirror.ubrco.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'geoip-database-20230519-1-any.pkg.tar.zst' nicht von mirror.ubrco.de übertragen : The requested URL returned error: 404
Warnung: zu viele Fehlermeldungen von mirror.ubrco.de, überspringe den Rest des Vorgangs
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von pkg.fef.moe übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von mirror.selfnet.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von pkg.fef.moe übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'libbytesize-2.8-1-x86_64.pkg.tar.zst' nicht von pkg.fef.moe übertragen : The requested URL returned error: 404
Warnung: zu viele Fehlermeldungen von pkg.fef.moe, überspringe den Rest des Vorgangs
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von mirror.selfnet.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'libbytesize-2.8-1-x86_64.pkg.tar.zst' nicht von mirror.selfnet.de übertragen : The requested URL returned error: 404
Warnung: zu viele Fehlermeldungen von mirror.selfnet.de, überspringe den Rest des Vorgangs
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von mirror.gnomus.de übertragen : Failed to connect to mirror.gnomus.de port 443 after 10000 ms: Timeout was reached
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von mirror.gnomus.de übertragen : Failed to connect to mirror.gnomus.de port 443 after 10001 ms: Timeout was reached
Fehler: Konnte Datei 'libbytesize-2.8-1-x86_64.pkg.tar.zst' nicht von mirror.gnomus.de übertragen : Failed to connect to mirror.gnomus.de port 443 after 10000 ms: Timeout was reached
Warnung: zu viele Fehlermeldungen von mirror.gnomus.de, überspringe den Rest des Vorgangs
Fehler: Konnte Datei 'mkinitcpio-nfs-utils-0.3-8-x86_64.pkg.tar.zst' nicht von mirror.gnomus.de übertragen : Failed to connect to mirror.gnomus.de port 443 after 10000 ms: Timeout was reached
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von mirror.pseudoform.org übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'libbytesize-2.8-1-x86_64.pkg.tar.zst' nicht von mirror.pseudoform.org übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von mirror.pseudoform.org übertragen : The requested URL returned error: 404
Warnung: zu viele Fehlermeldungen von mirror.pseudoform.org, überspringe den Rest des Vorgangs
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von arch.unixpeople.org übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von arch.unixpeople.org übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'libbytesize-2.8-1-x86_64.pkg.tar.zst' nicht von arch.unixpeople.org übertragen : The requested URL returned error: 404
Warnung: zu viele Fehlermeldungen von arch.unixpeople.org, überspringe den Rest des Vorgangs
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von mirror.kumi.systems übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von mirror.kumi.systems übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von ftp.fau.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von ftp.fau.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von mirror.cmt.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von mirror.cmt.de übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'python-pyaml-23.5.6-1-any.pkg.tar.zst' nicht von mirror.f4st.host übertragen : The requested URL returned error: 404
Fehler: Konnte Datei 'qt5-base-5.15.9+kde+r152-1-x86_64.pkg.tar.zst' nicht von mirror.f4st.host übertragen : The requested URL returned error: 404
Warnung: Konnte einige Dateien nicht übertragen
Fehler: Der Vorgang konnte nicht durchgeführt werden (Konnte manche Dateien nicht übertragen)
Fehler sind aufgetreten, keine Pakete wurden aktualisiert.
 -> error installing repo packages

Drücke ENTER um dieses Fenster zu schließen: 


1 Like

z.B. hinzufügen

Server = https://mirror.moson.org/arch/$repo/os/$arch

als erste in die Datei /etc/pacman.d/mirrorlist einfügen.

1 Like

Soweit so gut, lief auch an, aber dann gab es wieder Fehlermeldung:

:: Paketdatenbanken werden synchronisiert …
 endeavouros ist aktuell
 core ist aktuell
 extra ist aktuell
 community ist aktuell
 multilib ist aktuell
:: Vollständige Systemaktualisierung wird gestartet …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …

Warnung: Zu wenig Spalten für Tabellenanzeige vorhanden
Pakete (83) alsa-card-profiles-1:0.3.71-1  bash-5.1.016-4  bind-9.18.15-1  binutils-2.40-6
            curl-8.1.1-1  diffutils-3.10-1  ell-0.57-1  endeavouros-keyring-20230523-1
            endeavouros-skel-xfce4-3.7-1  eos-bash-shared-23-19.1  eos-qogir-icons-5-1
            exiv2-0.27.6-2  f2fs-tools-1.16.0-2  ffmpeg-2:6.0-7  firefox-113.0.2-1
            fribidi-1.0.13-1  fzf-0.41.0-1  geoip-database-20230519-1  glances-3.4.0.3-1
            glib2-2.76.3-1  gst-libav-1.22.3-2  gst-plugin-pipewire-1:0.3.71-1
            gst-plugins-bad-1.22.3-2  gst-plugins-bad-libs-1.22.3-2  gst-plugins-base-1.22.3-2
            gst-plugins-base-libs-1.22.3-2  gst-plugins-good-1.22.3-2  gst-plugins-ugly-1.22.3-2
            gstreamer-1.22.3-2  gtk-update-icon-cache-1:4.10.3-3  gtk3-1:3.24.38-1  hidapi-0.14.0-1
            imagemagick-7.1.1.10-1  imath-3.1.8-1  iwd-2.5-1  lib32-curl-8.1.1-1
            lib32-glib2-2.76.3-1  lib32-mesa-23.1.0-1  lib32-util-linux-2.39-1  libbytesize-2.8-2
            libepoxy-1.5.10-2  libexif-0.6.24-2  libheif-1.16.2-1  libjxl-0.8.1-2  libmfx-23.2.2-1
            libpipewire-1:0.3.71-1  libtiff-4.5.0-4  libwebp-1.3.0-3  libxfce4ui-4.18.4-1
            linux-6.3.4.arch1-1  linux-headers-6.3.4.arch1-1  mesa-23.1.0-1
            mkinitcpio-nfs-utils-0.3-8  mpfr-4.2.0.p9-1  nmap-7.94-1  openconnect-1:9.12-1
            openexr-3.1.7-2  pacman-6.0.2-7  pam-1.5.3-2  parallel-20230522-1  patch-2.7.6-10
            perl-uri-5.19-1  pipewire-1:0.3.71-1  pipewire-alsa-1:0.3.71-1
            pipewire-audio-1:0.3.71-1  pipewire-jack-1:0.3.71-1  pipewire-pulse-1:0.3.71-1
            python-pyaml-23.5.9-1  qt5-base-5.15.9+kde+r154-1  qt5-declarative-5.15.9+kde+r26-1
            qt5-webengine-5.15.14-1  qt6-base-6.5.1-1  qt6-declarative-6.5.1-1
            qt6-translations-6.5.1-1  rav1e-0.6.6-1  thunderbird-102.11.1-1  util-linux-2.39-3
            util-linux-libs-2.39-3  v4l-utils-1.24.1-2  wget-1.21.4-1  xfce4-panel-4.18.4-1
            yay-12.0.5-1  zbar-0.23.90-3

Gesamtgröße des Downloads:              508,12 MiB
Gesamtgröße der installierten Pakete:  1747,39 MiB
Größendifferenz der Aktualisierung:      13,66 MiB

:: Installation fortsetzen? [J/n] j
:: Pakete werden empfangen …
 linux-headers-6.3.4.arch1-...    29,2 MiB  5,27 MiB/s 00:06 [--------------------------------] 100%
 thunderbird-102.11.1-1-x86_64    51,6 MiB  6,46 MiB/s 00:08 [--------------------------------] 100%
 qt6-base-6.5.1-1-x86_64          17,6 MiB  5,82 MiB/s 00:03 [--------------------------------] 100%
 firefox-113.0.2-1-x86_64         64,6 MiB  6,45 MiB/s 00:10 [--------------------------------] 100%
 qt6-declarative-6.5.1-1-x86_64   16,8 MiB  6,46 MiB/s 00:03 [--------------------------------] 100%
 mesa-23.1.0-1-x86_64             15,2 MiB  5,86 MiB/s 00:03 [--------------------------------] 100%
 lib32-mesa-23.1.0-1-x86_64       13,3 MiB  5,95 MiB/s 00:02 [--------------------------------] 100%
 qt5-base-5.15.9+kde+r154-1...    13,1 MiB  6,08 MiB/s 00:02 [--------------------------------] 100%
 ffmpeg-2:6.0-7-x86_64            11,4 MiB  5,63 MiB/s 00:02 [--------------------------------] 100%
 imagemagick-7.1.1.10-1-x86_64     8,3 MiB  6,28 MiB/s 00:01 [--------------------------------] 100%
 qt5-webengine-5.15.14-1-x86_64   48,3 MiB  3,49 MiB/s 00:14 [--------------------------------] 100%
 gtk3-1:3.24.38-1-x86_64           7,7 MiB  6,53 MiB/s 00:01 [--------------------------------] 100%
 binutils-2.40-6-x86_64            7,5 MiB  6,01 MiB/s 00:01 [--------------------------------] 100%
 nmap-7.94-1-x86_64                5,6 MiB  6,12 MiB/s 00:01 [--------------------------------] 100%
 glib2-2.76.3-1-x86_64             3,8 MiB  6,64 MiB/s 00:01 [--------------------------------] 100%
 imath-3.1.8-1-x86_64              4,0 MiB  5,06 MiB/s 00:01 [--------------------------------] 100%
 gst-plugins-base-libs-1.22...     2,2 MiB  6,49 MiB/s 00:00 [--------------------------------] 100%
 gst-plugins-bad-libs-1.22....     2,4 MiB  5,30 MiB/s 00:00 [--------------------------------] 100%
 qt6-translations-6.5.1-1-any      2,4 MiB  5,51 MiB/s 00:00 [--------------------------------] 100%
 util-linux-2.39-3-x86_64          2,7 MiB  5,37 MiB/s 00:00 [--------------------------------] 100%
 gst-plugins-good-1.22.3-2-...     2,2 MiB  7,33 MiB/s 00:00 [--------------------------------] 100%
 libjxl-0.8.1-2-x86_64          2038,5 KiB  5,38 MiB/s 00:00 [--------------------------------] 100%
 bind-9.18.15-1-x86_64          2006,9 KiB  5,25 MiB/s 00:00 [--------------------------------] 100%
 exiv2-0.27.6-2-x86_64          1970,8 KiB  5,16 MiB/s 00:00 [--------------------------------] 100%
 gstreamer-1.22.3-2-x86_64      1836,9 KiB  7,67 MiB/s 00:00 [--------------------------------] 100%
 bash-5.1.016-4-x86_64          1719,1 KiB  5,79 MiB/s 00:00 [--------------------------------] 100%
 rav1e-0.6.6-1-x86_64           1652,7 KiB  5,68 MiB/s 00:00 [--------------------------------] 100%
 linux-6.3.4.arch1-1-x86_64      146,5 MiB  9,25 MiB/s 00:16 [--------------------------------] 100%
 v4l-utils-1.24.1-2-x86_64      1490,7 KiB  5,09 MiB/s 00:00 [--------------------------------] 100%
 libtiff-4.5.0-4-x86_64         1262,6 KiB  7,85 MiB/s 00:00 [--------------------------------] 100%
 lib32-glib2-2.76.3-1-x86_64    1244,2 KiB  9,80 MiB/s 00:00 [--------------------------------] 100%
 openexr-3.1.7-2-x86_64         1196,3 KiB  7,49 MiB/s 00:00 [--------------------------------] 100%
 fzf-0.41.0-1-x86_64            1231,4 KiB  6,68 MiB/s 00:00 [--------------------------------] 100%
 curl-8.1.1-1-x86_64            1186,9 KiB  6,33 MiB/s 00:00 [--------------------------------] 100%
 gst-plugins-bad-1.22.3-2-x...  1112,2 KiB  6,03 MiB/s 00:00 [--------------------------------] 100%
 pipewire-audio-1:0.3.71-1-...  1077,4 KiB  11,3 MiB/s 00:00 [--------------------------------] 100%
 xfce4-panel-4.18.4-1-x86_64     931,0 KiB  10,1 MiB/s 00:00 [--------------------------------] 100%
 wget-1.21.4-1-x86_64            731,9 KiB  6,94 MiB/s 00:00 [--------------------------------] 100%
 openconnect-1:9.12-1-x86_64     866,8 KiB  6,51 MiB/s 00:00 [--------------------------------] 100%
 glances-3.4.0.3-1-any           708,3 KiB  7,20 MiB/s 00:00 [--------------------------------] 100%
 pipewire-1:0.3.71-1-x86_64      638,3 KiB  9,45 MiB/s 00:00 [--------------------------------] 100%
 iwd-2.5-1-x86_64                565,3 KiB  9,68 MiB/s 00:00 [--------------------------------] 100%
 libexif-0.6.24-2-x86_64         483,7 KiB  7,87 MiB/s 00:00 [--------------------------------] 100%
 pam-1.5.3-2-x86_64              473,3 KiB  6,90 MiB/s 00:00 [--------------------------------] 100%
 mpfr-4.2.0.p9-1-x86_64          428,0 KiB  6,97 MiB/s 00:00 [--------------------------------] 100%
 util-linux-libs-2.39-3-x86_64   441,6 KiB  5,83 MiB/s 00:00 [--------------------------------] 100%
 lib32-util-linux-2.39-1-x86_64  415,4 KiB  8,63 MiB/s 00:00 [--------------------------------] 100%
 libwebp-1.3.0-3-x86_64          346,2 KiB  9,95 MiB/s 00:00 [--------------------------------] 100%
 libxfce4ui-4.18.4-1-x86_64      383,6 KiB  8,14 MiB/s 00:00 [--------------------------------] 100%
 libpipewire-1:0.3.71-1-x86_64   372,7 KiB  6,38 MiB/s 00:00 [--------------------------------] 100%
 diffutils-3.10-1-x86_64         344,6 KiB  6,73 MiB/s 00:00 [--------------------------------] 100%
 parallel-20230522-1-any         327,8 KiB  7,28 MiB/s 00:00 [--------------------------------] 100%
 libheif-1.16.2-1-x86_64         323,1 KiB  8,53 MiB/s 00:00 [--------------------------------] 100%
 libepoxy-1.5.10-2-x86_64        324,0 KiB  6,73 MiB/s 00:00 [--------------------------------] 100%
 gst-plugins-base-1.22.3-2-...   322,2 KiB  7,32 MiB/s 00:00 [--------------------------------] 100%
 lib32-curl-8.1.1-1-x86_64       302,2 KiB  8,20 MiB/s 00:00 [--------------------------------] 100%
 zbar-0.23.90-3-x86_64           249,8 KiB  10,6 MiB/s 00:00 [--------------------------------] 100%
 ell-0.57-1-x86_64               236,4 KiB  10,0 MiB/s 00:00 [--------------------------------] 100%
 gst-plugins-ugly-1.22.3-2-...   217,5 KiB  6,25 MiB/s 00:00 [--------------------------------] 100%
 f2fs-tools-1.16.0-2-x86_64      210,3 KiB  8,56 MiB/s 00:00 [--------------------------------] 100%
 pipewire-pulse-1:0.3.71-1-...   166,3 KiB  5,41 MiB/s 00:00 [--------------------------------] 100%
 pipewire-jack-1:0.3.71-1-x...   157,0 KiB  6,67 MiB/s 00:00 [--------------------------------] 100%
 gst-libav-1.22.3-2-x86_64        95,6 KiB  3,59 MiB/s 00:00 [--------------------------------] 100%
 patch-2.7.6-10-x86_64            93,0 KiB  2,67 MiB/s 00:00 [--------------------------------] 100%
 libmfx-23.2.2-1-x86_64           57,4 KiB  1913 KiB/s 00:00 [--------------------------------] 100%
 gst-plugin-pipewire-1:0.3....    48,0 KiB  1601 KiB/s 00:00 [--------------------------------] 100%
 fribidi-1.0.13-1-x86_64          42,2 KiB  1407 KiB/s 00:00 [--------------------------------] 100%
 hidapi-0.14.0-1-x86_64           41,2 KiB  1373 KiB/s 00:00 [--------------------------------] 100%
 python-pyaml-23.5.9-1-any        34,8 KiB  1161 KiB/s 00:00 [--------------------------------] 100%
 alsa-card-profiles-1:0.3.7...    28,4 KiB  2,13 MiB/s 00:00 [--------------------------------] 100%
 libbytesize-2.8-2-x86_64         25,2 KiB   933 KiB/s 00:00 [--------------------------------] 100%
 gtk-update-icon-cache-1:4....    16,5 KiB   973 KiB/s 00:00 [--------------------------------] 100%
 pipewire-alsa-1:0.3.71-1-x...     4,9 KiB   289 KiB/s 00:00 [--------------------------------] 100%
 Gesamt (73/73)                  508,1 MiB  30,6 MiB/s 00:17 [--------------------------------] 100%
(83/83) Schlüssel im Schlüsselbund werden geprüft            [--------------------------------] 100%
(83/83) Paket-Integrität wird überprüft                      [--------------------------------] 100%
Fehler: yay: signature from "manuel <manuel@endeavouros.com>" is unknown trust
:: Datei /var/cache/pacman/pkg/yay-12.0.5-1-x86_64.pkg.tar.zst ist beschädigt (Ungültiges oder beschädigtes Paket (PGP-Signatur)).
Soll die Datei entfernt werden? [J/n] j
Fehler: Der Vorgang konnte nicht durchgeführt werden (Ungültiges oder beschädigtes Paket (PGP-Signatur))
Fehler sind aufgetreten, keine Pakete wurden aktualisiert.
 -> error installing repo packages

Drücke ENTER um dieses Fenster zu schließen: 


  1. Update endeavouros-keyring, dann das ganze System.
  2. Entferne danach den Abschnitt “Community” aus der pacman.conf, bzw. kommentiere ihn komplett aus.

…bisweilen hilft es, wenn man die “Important Notifications” im Forum liest, da findet man das dann sofort. :wink:

2 Likes

Okay,
und wie mach ich das nun Step by Step als Beginner?

  1. sudo pacman -Sy endeavouros-keyring && sudo pacman -Syu

  2. sudo nano /etc/pacman.conf
    …darin die Änderungen vornehmen, sind 3-4 Zeilen mit “Community”, vor jeder Zeile eine Raute setzen (#), dann Strg+o für Speichern, dann Strg+x zum Beenden.

So schwer? Sorry, das hätte ich nicht gedacht… das wurde wie gesagt hier im Forum bereits alles gesagt unter “Wichtige Mitteilungen”, s.o. - :wink:

Doch es ist ‘so schwer’, denn ich nutze EOS täglich als simpler User.
Es ist schnell und stabil.
Ich nutze den Willkommensscreen um mit yay ein Update zu starten.
Programme die mir fehlten habe ich mit Pacseek installiert.
Habe im Grunde kaum Probleme, ausser eben wie dieses.
Zu dem Problem: Habe das gemacht was du geschrieben hattest.
Lief auch soweit durch, bis auf das nun ewig leidige Problem — die Bluetoothmouse wird mal wieder nicht erkannt.
OK, ich nimm’s mittlerweile mit 'nem Grinsen.
Also mal wieder das neueste Image zurückspulen und auf die Entwickler hoffen.
Danke!

2 Likes

Die Verwendung dieser:

eos-update

hilft bei dem Problem mit dem Schlüsselbund.

AUR-Pakete benötigen die Option --yay.

3 Likes

ahhh
manuel ist genial :wink: Ich habe die ganze Zeit darüber nachgedacht, warum Pacman das nicht macht :wink: Wenn Schlüsselringe veraltet sind, als erstes aktualisieren und dann das volle update… sehr simple …

ahhh @manuel is genius :wink: i was thinking all the time why pacman is not doing this :wink: if keyrings are outdated locally update them first… simply …

5 Likes

Same here, that’s very weird why it’s not implemented that way by default in pacman.
Except other arch distros would need to do this for their own keyrings as well anyway…but it could be solved by some pacman-pre-update config file where you can list all keyrings.

Arch devs have created a hook for keeping keys updated…
Maybe that hook could be used for the EndeavourOS keys too, haven’t looked at it yet.

2 Likes

hmm good reminder… i was asked one day if thismis enabled by default… now i remember… but it will not force update the package for the keyring… it does schedule Refresh existing PGP keys of archlinux-keyring regularly

lets check this @manuel but may we went out of offtopic in to devel forum :wink:

1 Like

That’s worse solution compared to what we have now, more resources wasted for nothing :upside_down_face:

1 Like

Hallo,

ich hab da keine “Community”-Einträge.

#
# /etc/pacman.conf
#
# See the pacman.conf(5) manpage for option and repository directives

#
# GENERAL OPTIONS
#
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
#CacheDir    = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
#GPGDir      = /etc/pacman.d/gnupg/
#HookDir     = /etc/pacman.d/hooks/
HoldPkg     = pacman glibc
#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg   =
#IgnoreGroup =

#NoUpgrade   =
#NoExtract   =

# Misc options
#UseSyslog
#Color
#NoProgressBar
CheckSpace
#VerbosePkgLists
#ParallelDownloads = 5

# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel    = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required

# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.

#
# REPOSITORIES
#   - can be defined here or included from another file
#   - pacman will search repositories in the order defined here
#   - local/custom mirrors can be added here or in separate files
#   - repositories listed first will take precedence when packages
#     have identical names, regardless of version number
#   - URLs will have $repo replaced by the name of the current repo
#   - URLs will have $arch replaced by the name of the architecture
#
# Repository entries are of the format:
#       [repo-name]
#       Server = ServerName
#       Include = IncludePath
#
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
#

# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.

#[core-testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

#[extra-testing]
#Include = /etc/pacman.d/mirrorlist

[extra]
Include = /etc/pacman.d/mirrorlist

# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.

#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist

#[multilib]
#Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

Oder meint ihr “core” und “extra”?

ist das die pacman.conf.pacnew?

Im Grunde kopierst du folgenden Abschnitt von der /etc/pacman.conf.pacnew

#[core-testing]
#Include = /etc/pacman.d/mirrorlist

[core]
Include = /etc/pacman.d/mirrorlist

#[extra-testing]
#Include = /etc/pacman.d/mirrorlist

[extra]
Include = /etc/pacman.d/mirrorlist

# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.

#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist

[multilib]
Include = /etc/pacman.d/mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

und fügst ihn in /etc/pacman.conf unter

[endeavouros]
SigLevel = PackageRequired
Include = /etc/pacman.d/endeavouros-mirrorlist

ein und entfernst beim Abschnitt multilib die # Zeichen, was ich in meinem Beispiel getan habe.

1 Like

Leider nicht. Es ist (mittlerweile) die pacman.conf.
Die bisherige hatte ich durch die .pacnew erstetzt.
Ich komm damit irgendwie (noch) nicht ganz klar, wann ich

  1. die bisherige pacman.conf belasse
  2. die beiden zusammen merge
  3. die alte pacman.conf mit der .pacnew überschreibe

Wo bekomme ich jetzt die alte pacman.conf wieder her?
Gibt’s davon eine pacman.conf.bak? ( ich schau mal … )
Edit: Nein, gibt wohl kein Backup. Mein Fehler.

nicht tragisch, solange du die Standard Repos benutzt hast, kannst du diese hier benutzen

Danke, EnOS Updates funktionieren wieder.

2 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.