:: jack2-1.9.22-2 and pipewire-jack-1:1.6.9-1 are in conflict (jack). Remove pipewire-jack? [y/N]
Pressing N leads to the transaction failing. Pressing Y yields:
:: removing pipewire-jack breaks dependency 'pipewire-jack' required by zrythm
Similar issues have been brought up on the forum before; the problem is, I don’t actually have JACK installed:
$ sudo pacman -Q jack
pipewire-jack 1:1.6.9-1
$
Additionally, pacmandoes not see this conflict:
$ sudo pacman -Syu
:: Synchronizing package databases...
endeavouros is up to date
core is up to date
extra is up to date
multilib is up to date
:: Starting full system upgrade...
there is nothing to do
$
I can’t find any packages on my system that depend on specifically jack2 (and not the generic jack target), although maybe I’m not searching correctly.
Uninstalling zrythm allows the replacement to proceed.
I checked the dependency lists of all of the upgraded packages and none of them explicitly require jack2. The closest I can find is lib32-portaudio and lib32-openal requiring lib32-jack and libjack.so, both of which can be provided by pipewire packages listed explicitly alongside the JACK equivalents in the dependencies. Why, then, is yay trying to install a conflicting version of the dependency when a non-conflicting version is available?
warning: pipewire-jack-1:1.6.9-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Package (1) Old Version New Version Net Change
extra/pipewire-jack 1:1.6.9-1 1:1.6.9-1 0.00 MiB
Total Installed Size: 0.68 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
I think the culprit is lib32-jack via lib32-openal
$ yay -Si lib32-opeal
Repository : aur
Name : lib32-openal
Version : 1.25.2-2
Description : Cross-platform 3D audio library, software implementation (32-bit)
URL : https://github.com/kcat/openal-soft
Licenses : LGPL-2.0-or-later
Groups : None
Provides : libopenal.so
Depends On : lib32-gcc-libs lib32-glibc openal
Optional Deps : lib32-fluidsynth
Make Deps : cmake git lib32-alsa-lib lib32-jack lib32-libpulse lib32-pipewire lib32-portaudio ninja
Check Deps : None
Conflicts With : None
Replaces : None
AUR URL : https://aur.archlinux.org/packages/lib32-openal
First Submitted : Sun 16 Aug 2026 09:35:21 PM CEST
Keywords : None
Last Modified : Wed 23 Sep 2026 07:53:05 PM CEST
Maintainer : Refreeze5911
Popularity : 6.445626
Votes : 13
Out-of-date : No
$ yay -Si lib32-jack
error: package 'lib32-jack' was not found
-> exit status 1
lib32-jack does not exist, neither in arch repos nor on aur. Maybe yay then tries with lib32-jack2 instead, hence maybe creating conflicts.
Edit
This made me look a bit deeper into pipewire-jack (I don’t have that on my system, I only have jack2). And according to pacman, pipewire-jack is a dependency of for example ffmpeg, which is not true:
$ pacman -Sii pipewire-jack
Repository : extra
Name : pipewire-jack
Version : 1:1.6.9-1
Description : Low-latency audio/video router and processor - JACK replacement
Architecture : x86_64
URL : https://pipewire.org
Licenses : MIT GPL-2.0-only LGPL-2.1-or-later
Groups : None
Provides : jack libjack.so=0-64 libjacknet.so=0-64 libjackserver.so=0-64
Depends On : libpipewire=1:1.6.9-1 libpipewire-0.3.so=0-64 pipewire-audio=1:1.6.9-1 pipewire=1:1.6.9-1 glibc pipewire-session-manager sh
Optional Deps : jack-example-tools: for official JACK example-clients and tools
Required By : a2jmidid adljack adlplug-standalone aeolus aj-snapshot aliki allegro4 ambdec ams amsynth-standalone ardour aubio audacious-plugins audacity audaspace blender cardinal-standalone
cava chuck csound-plugins dexed-standalone drumgizmo-standalone drumkv1-standalone dssi ebumeter ecasound ffmpeg ffmpeg4.4 fluidsynth freewheeling geonkick-standalone gnuradio
gpac guitarix hydrogen iempluginsuite-standalone jaaa jack-example-tools jack-stdio jack2-dbus jack_delay jack_mixer jack_utils jackmeter jackminimix jacktrip jalv jami-daemon
japa jconvolver jnoisemeter lib32-pipewire-jack liblsp-audio-jack-lib librespot libspectmorph linuxsampler liquidsfz-standalone loadtracker luppp megra mididings mpd mplayer mpv
mumble muse new-session-manager njconnect obs-studio opnplug-standalone osc2midi overwitch padthv1-standalone patchmatrix pd pipewire-jack-client polyphone portaudio praat
pulseaudio-jack python-jack-client python-rtmidi python-zita-jacktools qemu-audio-jack qjackctl qmidiarp-standalone qmidinet qtractor recordmydesktop rosegarden rtaudio rtmidi
samplv1-standalone setbfree-standalone sfizz-standalone shairport-sync snd spectmorph-tools ssr stk supercollider synthv1-standalone tenacity timidity++ vlc-plugin-jack waybar
wolf-spectrum x42-plugins-standalone xjadeo xwax yass yoshimi-standalone zam-plugins-standalone zita-ajbridge zita-at1 zita-bls1 zita-dc1 zita-dpl1 zita-jclient zita-lrx zita-mu1
zita-njbridge zita-rev1 zynaddsubfx
Optional For : alsa-plugins avidemux-cli bespokesynth carla cmus csound dpf-plugins-standalone faust freeverb3 furnace gst-plugins-good milkytracker mlt mpg123 ob-xf-standalone
odin2-synthesizer-standalone ot-bboi-standalone ot-chonk-standalone ot-cryptid-standalone ot-keys-standalone ot-simian-standalone ot-urchin-standalone pipewire qmmp reaper sdl3
surge-xt-standalone xmms2
Conflicts With : jack jack2 pipewire-jack-client
Replaces : None
Download Size : 171,13 KiB
Installed Size : 701,21 KiB
Packager : Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Build Date : 2026-09-17T18:43:55 CEST
MD5 Sum : None
SHA-256 Sum : 333f297b165d9d059125d0b1bda6de4f4a628c36a7e904c6880665a730e6a7cc
Signatures : B8AC08600F108CDF
Extended Data : None
$ pacman -Si ffmpeg
Repository : extra
Name : ffmpeg
Version : 2:9.0.2-2
Description : Complete solution to record, convert and stream audio and video
Architecture : x86_64
URL : https://ffmpeg.org
Licenses : GPL-3.0-only
Groups : None
Provides : libavcodec.so=63-64 libavdevice.so=63-64 libavfilter.so=12-64 libavformat.so=63-64 libavutil.so=61-64 libswresample.so=7-64 libswscale.so=10-64
Depends On : alsa-lib aom bzip2 cairo dav1d fontconfig freetype2 fribidi glib2 glibc gmp gnutls gsm harfbuzz jack lame lcms2 libass libavc1394 libbluray libbs2b libdrm libdvdnav
libdvdread libgcc libgl libiec61883 libjxl libmodplug libopenmpt libplacebo libpulse libraw1394 librsvg libsoxr libssh libtheora libva libvdpau libvorbis libvpx libwebp
libx11 libxcb libxext libxml2 libxv ocl-icd onevpl opencore-amr openjpeg2 opus rav1e rubberband sdl2 snappy sndio speex srt svt-av1 v4l-utils vapoursynth vid.stab vmaf
vulkan-icd-loader x264 x265 xvidcore xz zeromq zimg zlib libass.so=9-64 libbs2b.so=0-64 libdav1d.so=7-64 libfreetype.so=6-64 libharfbuzz.so=0-64 libopenmpt.so=0-64
libplacebo.so=360-64 librav1e.so=0.8-64 librsvg-2.so=2-64 librubberband.so=3-64 libva.so=2-64 libva-drm.so=2-64 libva-x11.so=2-64 libvidstab.so=1.2-64 libvorbisenc.so=2-64
libvorbis.so=0-64 libvpx.so=12-64 libx264.so=165-64 libxvidcore.so=4-64 libzimg.so=2-64 libzmq.so=5-64
Optional Deps : avisynthplus: AviSynthPlus support
frei0r-plugins: Frei0r video effects support
intel-media-sdk: Intel QuickSync support (legacy)
ladspa: LADSPA filters
nvidia-utils: Nvidia NVDEC/NVENC support
onevpl-intel-gpu: Intel QuickSync support
Conflicts With : None
Replaces : None
Download Size : 15,16 MiB
Installed Size : 48,45 MiB
Packager : Robin Candau <antiz@archlinux.org>
Build Date : 2026-09-30T10:13:38 CEST
Validated By : SHA-256 Sum Signature
This is also one of the reasons I never use anything other than pacman to preform system updates, but rather just yay -S <package> if I absolutely need something from aur. Then yay -Quaq to check if there are any packages out of date from aur. (pacman -Qm to show installed packages from aur)
If it helps, I abandoned jack2 a long time ago, in favour of pipewire-jack. Works real smooth, plus you can use the pipewire tools to make JACK connections, too.
Here’s my pacman -Qi pipewire-jack:
Name : pipewire-jack
Version : 1:1.6.9-1
Description : Low-latency audio/video router and processor - JACK
replacement
Architecture : x86_64
URL : https://pipewire.org
Licenses : MIT GPL-2.0-only LGPL-2.1-or-later
Groups : None
Provides : jack libjack.so=0-64 libjacknet.so=0-64
libjackserver.so=0-64
Depends On : libpipewire=1:1.6.9-1 libpipewire-0.3.so=0-64
pipewire-audio=1:1.6.9-1 pipewire=1:1.6.9-1 glibc
pipewire-session-manager sh
Optional Deps : jack-example-tools: for official JACK example-clients and
tools
Required By : audacious-plugins audacity ffmpeg ffmpeg4.4 fluidsynth
idjc mpv obs-studio portaudio simplescreenrecorder
Optional For : alsa-plugins gst-plugins-good mpg123 pipewire sdl3
Conflicts With : jack jack2 pipewire-jack-client
Replaces : None
Installed Size : 701,21 KiB
Packager : Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Build Date : Do 17 Sep 2026 18:43:55 CEST
Install Date : Fr 25 Sep 2026 11:59:44 CEST
Install Reason : Explicitly installed
Install Script : No
Validated By : Signature
On the assumption that you were correct about lib32-openal, I explicitly installed lib32-pipewire-jack and then reran yay -Syu, and everything worked.
(Also, I don’t understand the edit part of your reply. I only ever use pacman and yay to install or upgrade anything.)
As I understand things from my brief research, jack and lib32-jack are virtual packages which have multiple candidates that can provide them; this seems to be the standard way to handle multiple options for satisfying a dependency in Arch. The question now is, why was yay unable to handle these correctly in this case?
I would guess that the problem probably isn’t with yay or pacman themselves, as I have multiple other packages installed with similar virtual dependencies and have never had this issue before. Does this mean that the PKGBUILD for lib32-openal is misconfigured, and if so, should I let the package maintainer know?
That is a system update.
Use yay -S <package(s)> to update specific packages from aur, and make sure your system is up to date before running yay with sudo pacman -Syu
You are responsible to make sure there are no conflicts when using aur, IMHO trusting yay, paru, pamac etc to manage that systemwide when using aur is not a sustainable approach.
You are correct about the virtual packages though, I did not use my brain.
Gotcha, that makes sense. I did run pacman -Syu before running yay, but you’re right that upgrading my AUR packages one by one would have avoided most of my confusion.
My question still remains, though: does this issue indicate that the PKGBUILD for lib32-openal is misconfigured? It doesn’t look like it is; it has lib32-jack in the dependencies, which is the correct way to specify the virtual package. Is this an error with pacman?
Well I think it is good practice (and maybe even a must) if you install anything with yay or pacman to always use -Syu because on a rolling distro there are always updates available, and this will prevent you fom getting into “dependency hell” , never do a partial update, because this is not supported by Arch.