I just got a laptop and installed Endeavor OS on it with the KDE Plasma desktop environment, since I already installed it this way on my desktop and it’s been working beautifully there, however I seem to be having a problem with my audio. Audio does not play at all, nor does it seem to detect the laptop’s built in microphone. When I go to the audio settings, it lists several audio devices, seemingly associated with the different cores on the cpu. None of them play any sound when I go between them. Attempting to change the audio device, the only option seems to be “Pro Audio”.
Honestly, I’m not sure where to begin with this problem. I’m not sure if its a problem with Endeavor, KDE, Linux, or the laptop hardware itself. Any help?
What choices do you get in the drop-downs?
These are mine…
Just “Off” and “Pro Audio”, on both playback devices and recording devices
Post the output of the following, It will provide your system’s audio and driver info.
inxi -Aaz
Please use the preformatted text option when posting terminal output.
Audio:
Device-1: Intel Core Ultra Processors HD Audio vendor: Lenovo
driver: sof-audio-pci-intel-ptl
alternate: snd_sof_pci_intel_ptl,snd_hda_intel bus-ID: 00:1f.3
chip-ID: 8086:e428 class-ID: 0401
API: ALSA v: k6.18.63-3-lts status: kernel-api
tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.6.11 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Bink
November 16, 2026, 12:11am
6
Welcome to the community @CyberValkyrie
Just expanding a little on @UncleSpellbinder ’s command, could you share the output of this command too? (it does overlap with @UncleSpellbinder ’s):
inxi -SMAxx --za
System:
Kernel: 6.18.63-3-lts arch: x86_64 bits: 64 compiler: gcc v: 16.2.1
Desktop: KDE Plasma v: 6.8.3 tk: Qt v: N/A wm: kwin_wayland dm: N/A
Distro: EndeavourOS base: Arch Linux
Machine:
Type: Convertible System: LENOVO product: 83TE v: Yoga 7 2-in-1 16IPH11
serial: <superuser required> Chassis: type: 31 v: Yoga 7 2-in-1 16IPH11
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0T76574 WIN
serial: <superuser required> part-nu: LENOVO_MT_83TE_BU_idea_FM_Yoga 7
2-in-1 16IPH11 Firmware: UEFI vendor: LENOVO v: T7CN18WW date: 04/20/2026
Audio:
Device-1: Intel Core Ultra Processors HD Audio vendor: Lenovo
driver: sof-audio-pci-intel-ptl bus-ID: 00:1f.3 chip-ID: 8086:e428
API: ALSA v: k6.18.63-3-lts status: kernel-api
Server-1: sndiod v: N/A status: off
Server-2: PipeWire v: 1.6.11 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin
Bink
November 16, 2026, 12:20am
8
Just to begin with, are you able to confirm the issue persists when you boot into the mainline (non-LTS) kernel?
It does persist, though I now have a “Stereo Output” option on the devices dropdown. This option also does not seem to work
Bink
November 16, 2026, 12:25am
10
Are you able to plug a pair of headphones in and see if those work?
Use the “Stereo Output” setting.
Headphones do work, with both “Pro Audio” and “Stereo Output”
Bink
November 16, 2026, 12:30am
12
Sorry, I should have noted this, but just confirming, those headphones are plugged into the 3.5mm audio jack, not a USB port?
Correct, just directly into the headphone jack
Bink
November 16, 2026, 12:32am
14
Without the headphones plugged in, if you crank the volume, do you hear anything at all? Even something tinny?
Bink
November 16, 2026, 12:34am
16
There is an issue reported here:
opened 08:18PM - 18 Sep 26 UTC
Realtek
[alsa-info.txt](https://github.com/user-attachments/files/32395770/alsa-info.txt… )
**Hardware**
- Lenovo Yoga 7 2-in-1 Aura Edition 16IPH11, MT 83TE (83TE000CGE)
- Intel Core Ultra 7 355 (Panther Lake)
- Codec: Realtek RT721 (ALC3347) + RT1320 smart amp, SoundWire link 3
- DMI: sys_vendor=LENOVO, product_name=83TE, product_sku="LENOVO_MT_83TE_BU_idea_FM_Yoga 7 2-in-1 16IPH11"
- BIOS: T7CN19WW (updated from T7CN18WW)
**Software**
- Fedora 44, kernel 7.2.5-200.fc44.x86_64 (6.19.10-300.fc44 also installed)
- alsa-sof-firmware-2025.12.2-1.fc44, alsa-ucm-1.2.16.1-1.fc44
- pipewire-1.6.8, wireplumber-0.5.17
**Summary**
Internal speakers and DMIC are not usable out of the box. GNOME shows only the headphone jack ("stereo-fallback") and no input source. The hardware itself works: with manual workarounds (see below) speakers, headphones, DMIC and headset jack all function.
**1. No SoundWire machine driver match**
sof-audio-pci-intel-ptl 0000:00:1f.3: No SoundWire machine driver found for the ACPI-reported configuration:
sof-audio-pci-intel-ptl 0000:00:1f.3: link 3 mfg_id 0x025d part_id 0x0721 version 0x3
sof-audio-pci-intel-ptl 0000:00:1f.3: link 3 mfg_id 0x025d part_id 0x1320 version 0x3
sof-audio-pci-intel-ptl 0000:00:1f.3: Use SoundWire default machine driver with function topologies
The fallback works: firmware 2.14.1.1 boots, function topologies load (sof-sdca-jack-id0, sof-sdca-1amp-id2, sof-ptl-dmic-4ch-id3, sof-hdmi-pcm5-id5), card "sof-soundwire" registers with Jack Out (0), Jack In (1), Speaker (2), HDMI (5-7), DMIC Raw (10). Topology ABI 3:29:1 vs kernel ABI 3:23:1.
**2. No working UCM profile**
- PipeWire/ACP falls back to "stereo-fallback", which only maps Jack Out. Speaker and DMIC are not exposed; no input source at all. Manually selected "pro-audio" is reverted to "stereo-fallback" after a jack plug/unplug event.
- "Dmic0 Capture Switch" (numid 69, bound to the mic-mute LED) defaults to off on all 4 channels, so the mic-mute LED stays on permanently.
- "Headset Mic" pin switch defaults to off.
- The RT1320 RAE/DSP update controls are never triggered, so no RAE parameters are requested (no "try to load RAE file" in dyndbg output).
**3. RT1320 without DSP firmware name and calibration from ACPI**
With dyndbg enabled for snd_soc_rt1320_sdw:
rt1320-sdca sdw:0:3:025d:1320:01: rt1320_parse_dp: temp_l_calib: 0 temp_r_calib: 0 r0_l_calib: 0, r0_r_calib: 0
rt1320-sdca sdw:0:3:025d:1320:01: rt1320_parse_dp: dspfw_name: (null)
rt1320-sdca sdw:0:3:025d:1320:01: rt1320_io_init version_id=2, dev_id=0x6981
rt1320-sdca sdw:0:3:025d:1320:01: rt1320_io_init hw_init complete
Speakers play, but sound very thin/tinny (no bass). linux-firmware only contains the generic patch files (rt1320-patch-code-vab/vc, rt1321-patch-code-va). Based on the driver's DMI naming, the expected RAE file would be:
realtek/rt1320/rt1320_RAE_LENOVO_83TE_LENOVO_MT_83TE_BU_idea_FM_Yoga.dat
**4. Possible BIOS regression**
With BIOS T7CN18WW, Fedora-Workstation-Live-44-1.7.x86_64.iso had working audio on this machine. After updating to T7CN19WW, the same live ISO only shows "Dummy Output". The old BIOS is no longer officially available, so this cannot be re-tested.
**Workaround (confirmed working, survives jack events and reboot)**
- `amixer -c 0 sset Dmic0 cap` and `amixer -c 0 sset 'Headset Mic' on`, then `alsactl store`
- WirePlumber rule setting `api.alsa.use-acp = false` for alsa_card.pci-0000_00_1f.3-platform-sof_sdw
**Related**
- thesofproject/sof#5902 (Yoga 7 Pro 15IPH11, ALC3347, Dummy Output)
- thesofproject/linux#5977 (Yoga Pro 7 15IPH11, rt721 + rt1320 + rt722 on link 3)
alsa-info.sh output attached.
This workaround was shared. You may like to give it a go?
Workaround (confirmed working, survives jack events and reboot)
amixer -c 0 sset Dmic0 cap and amixer -c 0 sset 'Headset Mic' on, then alsactl store
WirePlumber rule setting api.alsa.use-acp = false for alsa_card.pci-0000_00_1f.3-platform-sof_sdw
Was able to quite easily put in those commands for the first part of the workaround, but I’m not sure where that setting is located for WirePlumber or how exactly to change it.
Bink
November 16, 2026, 1:06am
18
I’d just like to confirm your PCI address matches what was shared in that GitHub issue. Can you please share the output of:
lspci -Dnnk | grep -A4 -iE 'audio|multimedia'
0000:00:1f.3 Multimedia audio controller [0401]: Intel Corporation Core Ultra Processors (Series 3) HD Audio [8086:e428] (rev 01)
Subsystem: Lenovo Device [17aa:380b]
Kernel driver in use: sof-audio-pci-intel-ptl
Kernel modules: snd_sof_pci_intel_ptl, snd_hda_intel
0000:00:1f.4 SMBus [0c05]: Intel Corporation Core Ultra Processors (Series 3) SMBus [8086:e422] (rev 01)
Subsystem: Lenovo Device [17aa:3845]
Kernel driver in use: i801_smbus
Bink
November 16, 2026, 1:14am
20
This’ll create a WirePlumber config path in your user config folder. If you need this system wide (multiple users), you might create this under /etc/wireplumber/wireplumber.conf.d/ instead.
mkdir -p ~/.config/wireplumber/wireplumber.conf.d
Create and edit your custom config file:
nano ~/.config/wireplumber/wireplumber.conf.d/99-test-disable-acp.conf
Paste this into it:
monitor.alsa.rules = [
{
matches = [
{
device.name = "alsa_card.pci-0000_00_1f.3-platform-sof_sdw"
}
]
actions = {
update-props = {
api.alsa.use-acp = false
}
}
}
]
Then restart your wireplumber service:
systemctl --user restart wireplumber
Please note, I’m not able to test this
Guided in part by: