So disappointed. Another black screen again after another update

xenotek · January 2, 2024, 8:32pm

With reference to to my last post, Newish installation black screen after update - #13 by xenotek

I just completed a yay update, and again boot stops after image select with black screen and no tty. I had a few updates since fresh install referenced in the link above, but now it updated the linux kernel and the system is broken. I use the LTS as the arch-1 causes black scrceen also.

So disappointed as this system worked flawless for over 2 years and now this problems repeatedly appears and with no apparent fix. Tried to use arch-root, did not work, ended up doing a fresh install with LTS.

Sooooo many other posts with same issue.

So so so disappointed. Actually considdering giving MX a try or going back to W10.

paclog

[2024-01-02T19:44:28+0200] [PACMAN] Running ‘pacman -S -y --config /etc/pacman.conf --’
[2024-01-02T19:44:28+0200] [PACMAN] synchronizing package lists
[2024-01-02T19:44:47+0200] [PACMAN] Running ‘pacman -S -y -u --config /etc/pacman.conf --’
[2024-01-02T19:44:47+0200] [PACMAN] synchronizing package lists
[2024-01-02T19:44:48+0200] [PACMAN] starting full system upgrade
[2024-01-02T21:06:38+0200] [PACMAN] Running ‘pacman -S -y --config /etc/pacman.conf --’
[2024-01-02T21:06:38+0200] [PACMAN] synchronizing package lists
[2024-01-02T21:09:53+0200] [PACMAN] Running ‘pacman -S -y -u --config /etc/pacman.conf --’
[2024-01-02T21:09:53+0200] [PACMAN] synchronizing package lists
[2024-01-02T21:09:54+0200] [PACMAN] starting full system upgrade
[2024-01-02T21:40:59+0200] [PACMAN] Running ‘pacman -S -y --config /etc/pacman.conf --’
[2024-01-02T21:40:59+0200] [PACMAN] synchronizing package lists
[2024-01-02T21:41:04+0200] [PACMAN] Running ‘pacman -S -y -u --config /etc/pacman.conf --’
[2024-01-02T21:41:04+0200] [PACMAN] synchronizing package lists
[2024-01-02T21:41:04+0200] [PACMAN] starting full system upgrade
[2024-01-02T21:41:37+0200] [ALPM] running ‘71-dkms-remove.hook’…
[2024-01-02T21:41:37+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod broadcom-wl/6.30.223.271 -k 6.6.7-arch1-1
[2024-01-02T21:41:38+0200] [ALPM-SCRIPTLET] ==> dkms remove --no-depmod broadcom-wl/6.30.223.271 -k 6.1.68-1-lts
[2024-01-02T21:41:38+0200] [ALPM-SCRIPTLET] ==> depmod 6.6.7-arch1-1
[2024-01-02T21:41:45+0200] [ALPM-SCRIPTLET] ==> depmod 6.1.68-1-lts
[2024-01-02T21:41:51+0200] [ALPM] running ‘90-kernel-remove.hook’…
[2024-01-02T21:41:51+0200] [ALPM-SCRIPTLET] :: kernel-install removing kernel 6.1.68-1-lts
[2024-01-02T21:41:52+0200] [ALPM-SCRIPTLET] :: kernel-install removing kernel 6.6.7-arch1-1
[2024-01-02T21:41:52+0200] [ALPM] transaction started
[2024-01-02T21:41:52+0200] [ALPM] upgraded tzdata (2023c-2 → 2023d-1)
[2024-01-02T21:41:52+0200] [ALPM] upgraded krb5 (1.20.1-2 → 1.21.2-2)
[2024-01-02T21:41:52+0200] [ALPM] upgraded libcap-ng (0.8.3-2 → 0.8.4-1)
[2024-01-02T21:41:52+0200] [ALPM] upgraded lz4 (1:1.9.4-1 → 1:1.9.4-2)
[2024-01-02T21:41:52+0200] [ALPM] upgraded systemd-libs (255-2 → 255.2-1)
[2024-01-02T21:41:52+0200] [ALPM] upgraded ca-certificates-mozilla (3.95-1 → 3.96.1-1)
[2024-01-02T21:41:52+0200] [ALPM] upgraded archlinux-keyring (20231207-1 → 20231222-1)
[2024-01-02T21:41:52+0200] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg…
[2024-01-02T21:41:57+0200] [ALPM-SCRIPTLET] ==> Updating trust database…
[2024-01-02T21:41:57+0200] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2024-01-21
[2024-01-02T21:41:57+0200] [ALPM] upgraded bind (9.18.20-1 → 9.18.21-1)
[2024-01-02T21:41:57+0200] [ALPM] upgraded bluez (5.71-2 → 5.71-3)
[2024-01-02T21:41:57+0200] [ALPM] upgraded bluez-libs (5.71-2 → 5.71-3)
[2024-01-02T21:41:57+0200] [ALPM] upgraded libseccomp (2.5.4-2 → 2.5.5-1)
[2024-01-02T21:41:58+0200] [ALPM] upgraded systemd (255-2 → 255.2-1)
[2024-01-02T21:42:00+0200] [ALPM] upgraded bluez-utils (5.71-2 → 5.71-3)
[2024-01-02T21:42:00+0200] [ALPM] upgraded c-ares (1.23.0-1 → 1.24.0-1)
[2024-01-02T21:42:00+0200] [ALPM] upgraded cdparanoia (10.2-8 → 10.2-9)
[2024-01-02T21:42:00+0200] [ALPM] upgraded fontconfig (2:2.14.2-1 → 2:2.15.0-2)
[2024-01-02T21:42:00+0200] [ALPM-SCRIPTLET] Rebuilding fontconfig cache…
[2024-01-02T21:42:08+0200] [ALPM] upgraded libdrm (2.4.118-1 → 2.4.119-1)
[2024-01-02T21:42:08+0200] [ALPM] upgraded vulkan-icd-loader (1.3.273-1 → 1.3.274-1)
[2024-01-02T21:42:09+0200] [ALPM] upgraded mesa (1:23.3.1-1 → 1:23.3.2-2)
[2024-01-02T21:42:09+0200] [ALPM] upgraded gtk3 (1:3.24.38-1 → 1:3.24.39-2)
[2024-01-02T21:42:09+0200] [ALPM] upgraded nss (3.95-1 → 3.96.1-1)
[2024-01-02T21:42:10+0200] [ALPM] upgraded chromium (120.0.6099.109-2 → 120.0.6099.129-1)
[2024-01-02T21:42:11+0200] [ALPM] upgraded dkms (3.0.11-1 → 3.0.12-1)
[2024-01-02T21:42:11+0200] [ALPM] upgraded endeavouros-keyring (20230523-1 → 20231222-1)
[2024-01-02T21:42:11+0200] [ALPM-SCRIPTLET] ==> Appending keys from endeavouros.gpg…
[2024-01-02T21:42:13+0200] [ALPM-SCRIPTLET] ==> Updating trust database…
[2024-01-02T21:42:13+0200] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2024-01-21
[2024-01-02T21:42:13+0200] [ALPM] upgraded gstreamer (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:13+0200] [ALPM] upgraded gst-plugins-base-libs (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:13+0200] [ALPM] upgraded gst-plugins-bad-libs (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:13+0200] [ALPM] upgraded svt-av1 (1.7.0-1 → 1.8.0-1)
[2024-01-02T21:42:13+0200] [ALPM] upgraded eos-bash-shared (23.30-1 → 23.31-1)
[2024-01-02T21:42:14+0200] [ALPM] upgraded eos-apps-info (23-6 → 23-7)
[2024-01-02T21:42:14+0200] [ALPM] upgraded eos-rankmirrors (2.25-1 → 2.26-1)
[2024-01-02T21:42:14+0200] [ALPM] upgraded hwloc (2.9.1-1 → 2.10.0-1)
[2024-01-02T21:42:14+0200] [ALPM] upgraded openmpi (4.1.5-5 → 4.1.6-1)
[2024-01-02T21:42:21+0200] [ALPM] upgraded firefox (120.0.1-1 → 121.0-1)
[2024-01-02T21:42:21+0200] [ALPM] upgraded gst-libav (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:21+0200] [ALPM] upgraded libde265 (1.0.14-1 → 1.0.15-1)
[2024-01-02T21:42:21+0200] [ALPM] upgraded imagemagick (7.1.1.23-1 → 7.1.1.24-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded gst-plugins-bad (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded gst-plugins-base (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded gst-plugins-good (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded gst-plugins-ugly (1.22.7-1 → 1.22.8-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded iputils (20221126-2 → 20231222-2)
[2024-01-02T21:42:22+0200] [ALPM] upgraded iwd (2.11-1 → 2.12-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded kernel-install-for-dracut (1.9.1-1 → 1.10.1-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded ngspice (41-1 → 42-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded libraw (0.21.1-2 → 0.21.2-1)
[2024-01-02T21:42:22+0200] [ALPM] upgraded onetbb (2021.10.0-1 → 2021.11.0-1)
[2024-01-02T21:42:23+0200] [ALPM] upgraded kicad (7.0.9-2 → 7.0.10-1)
[2024-01-02T21:42:27+0200] [ALPM] upgraded kicad-library (7.0.9-1 → 7.0.10-1)
[2024-01-02T21:43:54+0200] [ALPM] upgraded kicad-library-3d (7.0.9-1 → 7.0.10-1)
[2024-01-02T21:43:54+0200] [ALPM] upgraded libebml (1.4.4-1 → 1.4.5-1)
[2024-01-02T21:43:54+0200] [ALPM] upgraded libexttextcat (3.4.6-1 → 3.4.7-1)
[2024-01-02T21:43:54+0200] [ALPM] upgraded libheif (1.17.5-2 → 1.17.6-1)
[2024-01-02T21:43:54+0200] [ALPM] upgraded libnvme (1.6-2 → 1.7.1-1)
[2024-01-02T21:44:05+0200] [ALPM] upgraded linux (6.6.7.arch1-1 → 6.6.8.arch1-1)
[2024-01-02T21:44:09+0200] [ALPM] upgraded linux-headers (6.6.7.arch1-1 → 6.6.8.arch1-1)
[2024-01-02T21:44:12+0200] [ALPM] upgraded linux-lts (6.1.68-1 → 6.1.70-1)
[2024-01-02T21:44:19+0200] [ALPM] upgraded linux-lts-headers (6.1.68-1 → 6.1.70-1)
[2024-01-02T21:44:19+0200] [ALPM] upgraded parallel (20231122-1 → 20231222-1)
[2024-01-02T21:44:19+0200] [ALPM] upgraded ppp (2.5.0-1 → 2.5.0-2)
[2024-01-02T21:44:19+0200] [ALPM] upgraded python-capng (0.8.3-2 → 0.8.4-1)
[2024-01-02T21:44:19+0200] [ALPM] upgraded python-psutil (5.9.6-1 → 5.9.7-1)
[2024-01-02T21:44:19+0200] [ALPM] upgraded python-shtab (1.6.4-1 → 1.6.5-1)
[2024-01-02T21:44:19+0200] [ALPM] upgraded qpdf (11.6.4-1 → 11.7.0-1)
[2024-01-02T21:44:19+0200] [ALPM] upgraded qt5-script (5.15.15-2 → 5.15.16-1)
[2024-01-02T21:44:25+0200] [ALPM] upgraded qt5-webengine (5.15.15-3 → 5.15.16-1)
[2024-01-02T21:44:27+0200] [ALPM] upgraded qt6-base (6.6.1-2 → 6.6.1-3)
[2024-01-02T21:44:27+0200] [ALPM] upgraded sof-firmware (2023.09.2-1 → 2023.12-1)
[2024-01-02T21:44:27+0200] [ALPM] upgraded systemd-resolvconf (255-2 → 255.2-1)
[2024-01-02T21:44:27+0200] [ALPM] upgraded systemd-sysvcompat (255-2 → 255.2-1)
[2024-01-02T21:44:28+0200] [ALPM] upgraded vlc (3.0.20-2 → 3.0.20-4)
[2024-01-02T21:44:28+0200] [ALPM] upgraded xmlsec (1.2.37-1 → 1.2.39-1)
[2024-01-02T21:44:28+0200] [ALPM] upgraded xterm (388-1 → 389-1)
[2024-01-02T21:44:30+0200] [ALPM] transaction completed
[2024-01-02T21:44:33+0200] [ALPM] running ‘20-systemd-sysusers.hook’…
[2024-01-02T21:44:33+0200] [ALPM] running ‘30-systemd-catalog.hook’…
[2024-01-02T21:44:33+0200] [ALPM] running ‘30-systemd-daemon-reload-system.hook’…
[2024-01-02T21:44:34+0200] [ALPM] running ‘30-systemd-daemon-reload-user.hook’…
[2024-01-02T21:44:34+0200] [ALPM] running ‘30-systemd-hwdb.hook’…
[2024-01-02T21:44:34+0200] [ALPM] running ‘30-systemd-sysctl.hook’…
[2024-01-02T21:44:34+0200] [ALPM] running ‘30-systemd-tmpfiles.hook’…
[2024-01-02T21:44:34+0200] [ALPM] running ‘30-systemd-udev-reload.hook’…
[2024-01-02T21:44:36+0200] [ALPM] running ‘30-systemd-update.hook’…
[2024-01-02T21:44:36+0200] [ALPM] running ‘30-update-mime-database.hook’…
[2024-01-02T21:44:37+0200] [ALPM] running ‘40-update-ca-trust.hook’…
[2024-01-02T21:44:38+0200] [ALPM] running ‘60-depmod.hook’…
[2024-01-02T21:44:42+0200] [ALPM] running ‘70-dkms-install.hook’…
[2024-01-02T21:44:42+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod broadcom-wl/6.30.223.271 -k 6.6.8-arch1-1
[2024-01-02T21:44:53+0200] [ALPM-SCRIPTLET] ==> dkms install --no-depmod broadcom-wl/6.30.223.271 -k 6.1.70-1-lts
[2024-01-02T21:45:03+0200] [ALPM-SCRIPTLET] ==> depmod 6.6.8-arch1-1
[2024-01-02T21:45:09+0200] [ALPM-SCRIPTLET] ==> depmod 6.1.70-1-lts
[2024-01-02T21:45:11+0200] [ALPM] running ‘90-kernel-install.hook’…
[2024-01-02T21:45:11+0200] [ALPM-SCRIPTLET] Running kernel-install for 6.6.8-arch1-1
[2024-01-02T21:45:13+0200] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --no-hostonly --force /efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.6.8-arch1-1/initrd-fallback 6.6.8-arch1-1
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dash’ will not be installed, because command ‘dash’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘mksh’ will not be installed, because command ‘mksh’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘systemd-pcrphase’ will not be installed, because command ‘/usr/lib/systemd/systemd-pcrphase’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘busybox’ will not be installed, because command ‘busybox’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dbus-broker’ will not be installed, because command ‘dbus-broker’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘rngd’ will not be installed, because command ‘rngd’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmanctl’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand-wait-online’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘network-wicked’ will not be installed, because command ‘wicked’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dmraid’ will not be installed, because command ‘kpartx’ could not be found!
[2024-01-02T21:45:22+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘multipath’ will not be installed, because command ‘multipath’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘tpm2-tss’ will not be installed, because command ‘tpm2’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘dcbtool’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘fipvlan’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘lldpad’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘fcoemon’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘fcoeadm’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe-uefi’ will not be installed, because command ‘dcbtool’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe-uefi’ will not be installed, because command ‘fipvlan’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe-uefi’ will not be installed, because command ‘lldpad’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsi-iname’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsiadm’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsid’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘nvmf’ will not be installed, because command ‘nvme’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘biosdevname’ will not be installed, because command ‘biosdevname’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘memstrack’ will not be installed, because command ‘memstrack’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘mksquashfs’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘unsquashfs’ could not be found!
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: *** Including module: modsign ***
[2024-01-02T21:45:23+0200] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-02T21:45:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2024-01-02T21:45:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: crypt ***
[2024-01-02T21:45:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: dm ***
[2024-01-02T21:45:24+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-02T21:45:24+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-dm.rules
[2024-01-02T21:45:24+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 55-dm.rules
[2024-01-02T21:45:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: lvm ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 56-lvm.rules
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: mdraid ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-md-raid.rules
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: nvdimm ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: qemu ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: qemu-net ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: lunmask ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: resume ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-02T21:45:28+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Including module: virtiofs ***
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-02T21:45:29+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-02T21:45:30+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-02T21:45:30+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Mode: real
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Method: memcmp
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Files: 2003
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Linked: 8 files
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Compared: 0 xattrs
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Compared: 442 files
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Saved: 1.42 MiB
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: Duration: 0.023080 seconds
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Constructing AuthenticAMD.bin ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Using microcode found in ‘/boot/intel-ucode.img’ ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-02T21:45:31+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-02T21:45:32+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-02T21:45:32+0200] [ALPM-SCRIPTLET] dracut: *** Creating image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.6.8-arch1-1/initrd-fallback’ ***
[2024-01-02T21:45:39+0200] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.6.8-arch1-1/initrd-fallback’ done ***
[2024-01-02T21:45:40+0200] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --hostonly --no-hostonly-cmdline -f /efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.6.8-arch1-1/initrd 6.6.8-arch1-1
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dash’ will not be installed, because command ‘dash’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘mksh’ will not be installed, because command ‘mksh’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘systemd-pcrphase’ will not be installed, because command ‘/usr/lib/systemd/systemd-pcrphase’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘busybox’ will not be installed, because command ‘busybox’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dbus-broker’ will not be installed, because command ‘dbus-broker’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘rngd’ will not be installed, because command ‘rngd’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmanctl’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand-wait-online’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘network-wicked’ will not be installed, because command ‘wicked’ could not be found!
[2024-01-02T21:45:41+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dmraid’ will not be installed, because command ‘kpartx’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘tpm2-tss’ will not be installed, because command ‘tpm2’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsi-iname’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsiadm’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsid’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘nvmf’ will not be installed, because command ‘nvme’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘biosdevname’ will not be installed, because command ‘biosdevname’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘memstrack’ will not be installed, because command ‘memstrack’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘mksquashfs’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘unsquashfs’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dash’ will not be installed, because command ‘dash’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘mksh’ will not be installed, because command ‘mksh’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘systemd-pcrphase’ will not be installed, because command ‘/usr/lib/systemd/systemd-pcrphase’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘busybox’ will not be installed, because command ‘busybox’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dbus-broker’ will not be installed, because command ‘dbus-broker’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘rngd’ will not be installed, because command ‘rngd’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmanctl’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand-wait-online’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘network-wicked’ will not be installed, because command ‘wicked’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dmraid’ will not be installed, because command ‘kpartx’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘tpm2-tss’ will not be installed, because command ‘tpm2’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsi-iname’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsiadm’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsid’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘nvmf’ will not be installed, because command ‘nvme’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘memstrack’ will not be installed, because command ‘memstrack’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘mksquashfs’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘unsquashfs’ could not be found!
[2024-01-02T21:45:42+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-02T21:45:43+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-02T21:45:43+0200] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-02T21:45:43+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 70-persistent-net.rules
[2024-01-02T21:45:45+0200] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-02T21:45:46+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Mode: real
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Method: memcmp
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Files: 783
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Linked: 2 files
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Compared: 0 xattrs
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Compared: 37 files
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Saved: 356.65 KiB
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: Duration: 0.007144 seconds
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Using microcode found in ‘/boot/intel-ucode.img’ ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-02T21:45:47+0200] [ALPM-SCRIPTLET] dracut: *** Creating image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.6.8-arch1-1/initrd’ ***
[2024-01-02T21:45:51+0200] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.6.8-arch1-1/initrd’ done ***
[2024-01-02T21:45:52+0200] [ALPM-SCRIPTLET] Running kernel-install for 6.1.70-1-lts
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --no-hostonly --force /efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.1.70-1-lts/initrd-fallback 6.1.70-1-lts
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dash’ will not be installed, because command ‘dash’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘mksh’ will not be installed, because command ‘mksh’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘systemd-pcrphase’ will not be installed, because command ‘/usr/lib/systemd/systemd-pcrphase’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘busybox’ will not be installed, because command ‘busybox’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dbus-broker’ will not be installed, because command ‘dbus-broker’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘rngd’ will not be installed, because command ‘rngd’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmanctl’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand-wait-online’ could not be found!
[2024-01-02T21:46:02+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘network-wicked’ will not be installed, because command ‘wicked’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dmraid’ will not be installed, because command ‘kpartx’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘multipath’ will not be installed, because command ‘multipath’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘tpm2-tss’ will not be installed, because command ‘tpm2’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘dcbtool’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘fipvlan’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘lldpad’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘fcoemon’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe’ will not be installed, because command ‘fcoeadm’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe-uefi’ will not be installed, because command ‘dcbtool’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe-uefi’ will not be installed, because command ‘fipvlan’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘fcoe-uefi’ will not be installed, because command ‘lldpad’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsi-iname’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsiadm’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsid’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘nvmf’ will not be installed, because command ‘nvme’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘biosdevname’ will not be installed, because command ‘biosdevname’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘memstrack’ will not be installed, because command ‘memstrack’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘mksquashfs’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘unsquashfs’ could not be found!
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: *** Including module: modsign ***
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: *** Including module: btrfs ***
[2024-01-02T21:46:03+0200] [ALPM-SCRIPTLET] dracut: *** Including module: crypt ***
[2024-01-02T21:46:04+0200] [ALPM-SCRIPTLET] dracut: *** Including module: dm ***
[2024-01-02T21:46:04+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-02T21:46:04+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-dm.rules
[2024-01-02T21:46:04+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 55-dm.rules
[2024-01-02T21:46:04+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: lvm ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-device-mapper.rules
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 56-lvm.rules
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: mdraid ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 64-md-raid.rules
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: nvdimm ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: qemu ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: qemu-net ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: lunmask ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: resume ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-02T21:46:07+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Including module: virtiofs ***
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-02T21:46:08+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-02T21:46:09+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-02T21:46:09+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Mode: real
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Method: memcmp
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Files: 1981
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Linked: 8 files
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Compared: 0 xattrs
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Compared: 445 files
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Saved: 1.42 MiB
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: Duration: 0.027104 seconds
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Constructing AuthenticAMD.bin ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Using microcode found in ‘/boot/intel-ucode.img’ ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-02T21:46:10+0200] [ALPM-SCRIPTLET] dracut: *** Creating image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.1.70-1-lts/initrd-fallback’ ***
[2024-01-02T21:46:17+0200] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.1.70-1-lts/initrd-fallback’ done ***
[2024-01-02T21:46:19+0200] [ALPM-SCRIPTLET] dracut: Executing: /usr/bin/dracut --hostonly --no-hostonly-cmdline -f /efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.1.70-1-lts/initrd 6.1.70-1-lts
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dash’ will not be installed, because command ‘dash’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘mksh’ will not be installed, because command ‘mksh’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘systemd-pcrphase’ will not be installed, because command ‘/usr/lib/systemd/systemd-pcrphase’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘busybox’ will not be installed, because command ‘busybox’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dbus-broker’ will not be installed, because command ‘dbus-broker’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘rngd’ will not be installed, because command ‘rngd’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmanctl’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand-wait-online’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘network-wicked’ will not be installed, because command ‘wicked’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dmraid’ will not be installed, because command ‘kpartx’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘tpm2-tss’ will not be installed, because command ‘tpm2’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsi-iname’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsiadm’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsid’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘nvmf’ will not be installed, because command ‘nvme’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘biosdevname’ will not be installed, because command ‘biosdevname’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘memstrack’ will not be installed, because command ‘memstrack’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘mksquashfs’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘unsquashfs’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dash’ will not be installed, because command ‘dash’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘mksh’ will not be installed, because command ‘mksh’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘systemd-pcrphase’ will not be installed, because command ‘/usr/lib/systemd/systemd-pcrphase’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘busybox’ will not be installed, because command ‘busybox’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dbus-broker’ will not be installed, because command ‘dbus-broker’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘rngd’ will not be installed, because command ‘rngd’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmanctl’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘connman’ will not be installed, because command ‘connmand-wait-online’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘network-wicked’ will not be installed, because command ‘wicked’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘dmraid’ will not be installed, because command ‘kpartx’ could not be found!
[2024-01-02T21:46:20+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘tpm2-tss’ will not be installed, because command ‘tpm2’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsi-iname’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsiadm’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘iscsi’ will not be installed, because command ‘iscsid’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘nvmf’ will not be installed, because command ‘nvme’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘memstrack’ will not be installed, because command ‘memstrack’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: memstrack is not available
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘mksquashfs’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: dracut module ‘squash’ will not be installed, because command ‘unsquashfs’ could not be found!
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd ***
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: *** Including module: systemd-initrd ***
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: *** Including module: i18n ***
[2024-01-02T21:46:21+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules ***
[2024-01-02T21:46:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: kernel-modules-extra ***
[2024-01-02T21:46:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: rootfs-block ***
[2024-01-02T21:46:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: terminfo ***
[2024-01-02T21:46:24+0200] [ALPM-SCRIPTLET] dracut: *** Including module: udev-rules ***
[2024-01-02T21:46:24+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 40-redhat.rules
[2024-01-02T21:46:24+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-firmware.rules
[2024-01-02T21:46:24+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 50-udev.rules
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 91-permissions.rules
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 80-drivers-modprobe.rules
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: Skipping udev rule: 70-persistent-net.rules
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Including module: dracut-systemd ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Including module: usrmount ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Including module: base ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Including module: fs-lib ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Including module: shutdown ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Including modules done ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Installing kernel module dependencies done ***
[2024-01-02T21:46:25+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies ***
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: *** Resolving executable dependencies done ***
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files ***
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Mode: real
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Method: memcmp
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Files: 766
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Linked: 2 files
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Compared: 0 xattrs
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Compared: 37 files
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Saved: 356.65 KiB
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: Duration: 0.006821 seconds
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: *** Hardlinking files done ***
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: *** Generating early-microcode cpio image ***
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: *** Using microcode found in ‘/boot/intel-ucode.img’ ***
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: *** Store current command line parameters ***
[2024-01-02T21:46:27+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files ***
[2024-01-02T21:46:28+0200] [ALPM-SCRIPTLET] dracut: *** Stripping files done ***
[2024-01-02T21:46:28+0200] [ALPM-SCRIPTLET] dracut: *** Creating image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.1.70-1-lts/initrd’ ***
[2024-01-02T21:46:34+0200] [ALPM-SCRIPTLET] dracut: *** Creating initramfs image file ‘/efi/e0c1fcb310634f8e9ff179c5a0da3a34/6.1.70-1-lts/initrd’ done ***
[2024-01-02T21:46:35+0200] [ALPM] running ‘dbus-reload.hook’…
[2024-01-02T21:46:35+0200] [ALPM] running ‘detect-old-perl-modules.hook’…
[2024-01-02T21:46:35+0200] [ALPM] running ‘eos-reboot-required.hook’…
[2024-01-02T21:46:36+0200] [ALPM] running ‘fontconfig.hook’…
[2024-01-02T21:46:36+0200] [ALPM] running ‘gdk-pixbuf-query-loaders.hook’…
[2024-01-02T21:46:36+0200] [ALPM] running ‘glib-compile-schemas.hook’…
[2024-01-02T21:46:36+0200] [ALPM] running ‘gtk-query-immodules-3.0.hook’…
[2024-01-02T21:46:37+0200] [ALPM] running ‘gtk-update-icon-cache.hook’…
[2024-01-02T21:46:37+0200] [ALPM] running ‘rebuild-detector.hook’…
[2024-01-02T21:46:44+0200] [ALPM] running ‘systemd-boot.hook’…
[2024-01-02T21:46:44+0200] [ALPM-SCRIPTLET] Copied “/usr/lib/systemd/boot/efi/systemd-bootx64.efi” to “/efi/EFI/systemd/systemd-bootx64.efi”.
[2024-01-02T21:46:44+0200] [ALPM-SCRIPTLET] Copied “/usr/lib/systemd/boot/efi/systemd-bootx64.efi” to “/efi/EFI/BOOT/BOOTX64.EFI”.
[2024-01-02T21:46:44+0200] [ALPM] running ‘update-desktop-database.hook’…
[2024-01-02T21:46:44+0200] [ALPM] running ‘update-vlc-plugin-cache.hook’…

ricklinux · January 2, 2024, 8:50pm

What is your current hardware output?

inxi -Faz | eos-sendlog

xenotek · January 2, 2024, 9:38pm

root@EndeavourOS /]# inxi -Faz
12System:
12Kernel 6.6.1-arch1-1 12arch x86_64 12bits 64 12compiler gcc 12v 13.2.1 12clocksource tsc
12available hpet,acpi_pm 12parameters initrd=\arch\boot\intel-ucode.img
initrd=\arch\boot\amd-ucode.img initrd=\arch\boot\x86_64\initramfs-linux.img
archisobasedir=arch archisolabel=EOS_202311 cow_spacesize=10G copytoram=n
module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm,pcspkr nouveau.modeset=1
i915.modeset=1 radeon.modeset=1 nvme_load=yes
12Desktop KDE Plasma 12v ERR-101 12tk Qt 12v 5.15.11 12dm N/A 12Distro EndeavourOS 12base Arch Linux
12Machine:
12Type Laptop 12System Dell 12product Latitude E6420 12v 01 12serial 12Chassis 12type 9
12serial
12Mobo Dell 12model 032T9K 12v A02 12serial 12UEFI Dell 12v A21 12date 11/14/2013
12Battery:
12ID-1 BAT0 12charge 31.7 Wh (100.0%) 12condition 31.7/49.9 Wh (63.4%) 12volts 12.5 12min 11.1 12model Samsung
SDI DELL 5G67C13 12type Li-ion 12serial 12status full
12CPU:
12Info 12model Intel Core i5-2520M 12bits 64 12type MT MCP 12arch Sandy Bridge 12gen core 2 12level v2
12built 2010-12 12process Intel 32nm 12family 6 12model-id 0x2A (42) 12stepping 7 12microcode 0x2F
12Topology 12cpus 1x 12cores 2 12tpc 2 12threads 4 12smt enabled 12cache 12L1 128 KiB
12desc d-2x32 KiB; i-2x32 KiB 12L2 512 KiB 12desc 2x256 KiB 12L3 3 MiB 12desc 1x3 MiB
12Speed (MHz) 12avg 798 12high 800 12min/max 800/3200 12base/boost 2500/4000 12scaling 12driver intel_cpufreq
12governor schedutil 12volts 0.0 V 12ext-clock 100 MHz 12cores 121 798 122 798 123 800 124 798 12bogomips 19967
12Flags avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
12Vulnerabilities
12Type gather_data_sampling 12status Not affected
12Type itlb_multihit 12status KVM: VMX disabled
12Type l1tf 12mitigation PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
12Type mds 12mitigation Clear CPU buffers; SMT vulnerable
12Type meltdown 12mitigation PTI
12Type mmio_stale_data 12status Unknown: No mitigations
12Type retbleed 12status Not affected
12Type spec_rstack_overflow 12status Not affected
12Type spec_store_bypass 12mitigation Speculative Store Bypass disabled via prctl
12Type spectre_v1 12mitigation usercopy/swapgs barriers and __user pointer sanitization
12Type spectre_v2 12mitigation Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
12Type srbds 12status Not affected
12Type tsx_async_abort 12status Not affected
12Graphics:
12Device-1 Intel 2nd Generation Core Processor Family Integrated Graphics 12vendor Dell 12driver i915
12v kernel 12arch Gen-6 12code Sandybridge 12process Intel 32nm 12built 2011 12ports 12active LVDS-1
12empty VGA-1 12bus-ID 00:02.0 12chip-ID 8086:0126 12class-ID 0300
12Device-2 NVIDIA GF119M [NVS 4200M] 12vendor Dell 12driver nouveau 12v kernel 12non-free 12series 390.xx+
12status legacy (EOL~2022-11-22) 12last 12release 390.157 12kernel 6.0 12xorg 1.21 12arch Fermi 12code GF1xx
12process 40/28nm 12built 2010-2016 12pcie 12gen 1 12speed 2.5 GT/s 12lanes 16 12ports 12active none 12empty DP-1,
DP-2, HDMI-A-1, LVDS-2, VGA-2 12bus-ID 01:00.0 12chip-ID 10de:1056 12class-ID 0300 12temp 53.0 C
12Device-3 Sunplus Innovation Laptop_Integrated_Webcam_FHD 12driver uvcvideo 12type USB 12rev 2.0
12speed 480 Mb/s 12lanes 1 12mode 2.0 12bus-ID 2-1.5:4 12chip-ID 1bcf:2802 12class-ID 0e02
12Display 12server X.org 12v 1.21.1.10 12driver 12X 12loaded modesetting
12alternate fbdev,intel,nouveau,nv,vesa 12dri crocus,nouveau 12gpu i915 12display-ID :0
12Monitor-1 LVDS-1 12model AU Optronics 0x313e 12built 2010 12res 1600x900 12dpi 132 12gamma 1.2
12size 309x174mm (12.17x6.85") 12diag 355mm (14") 12ratio 16:9 12modes 1600x900
12API EGL 12v 1.5 12hw 12drv intel crocus 12drv nvidia nouveau 12platforms 12device 0 12drv crocus 12device 1
12drv nouveau 12device 2 12drv swrast 12gbm 12drv nouveau 12surfaceless 12drv crocus 12inactive wayland,x11
12API OpenGL 12v 4.5 12compat-v 3.3 12vendor mesa 12v 23.3.2-arch1.2 12note incomplete (EGL sourced)
12renderer NVD9, Mesa Intel HD Graphics 3000 (SNB GT2), llvmpipe (LLVM 16.0.6 256 bits)
12API Vulkan 12Message No Vulkan data available.
12Audio:
12Device-1 Intel 6 Series/C200 Series Family High Definition Audio 12vendor Dell 6
12driver snd_hda_intel 12v kernel 12bus-ID 00:1b.0 12chip-ID 8086:1c20 12class-ID 0403
12Device-2 NVIDIA GF119 HDMI Audio 12vendor Dell 12driver snd_hda_intel 12v kernel 12pcie 12gen 1
12speed 2.5 GT/s 12lanes 16 12bus-ID 01:00.1 12chip-ID 10de:0e08 12class-ID 0403
12API ALSA 12v k6.6.1-arch1-1 12status kernel-api 12tools alsactl,alsamixer,amixer
12Server-1 PipeWire 12v 1.0.0 12status off 12with 121 pipewire-pulse 12status off 122 wireplumber 12status off
123 pipewire-alsa 12type plugin 124 pw-jack 12type plugin 12tools pactl,pw-cat,pw-cli,wpctl
12Network:
12Device-1 Intel 82579LM Gigabit Network 12vendor Dell 12driver e1000e 12v kernel 12port 5080
12bus-ID 00:19.0 12chip-ID 8086:1502 12class-ID 0200
12IF eno1 12state up 12speed 100 Mbps 12duplex full 12mac
12Device-2 Intel Centrino Ultimate-N 6300 12driver iwlwifi 12v kernel 12pcie 12gen 1 12speed 2.5 GT/s
12lanes 1 12bus-ID 03:00.0 12chip-ID 8086:422b 12class-ID 0280
12IF wlan0 12state down 12mac
12Bluetooth:
12Device-1 Dell DW375 Bluetooth Module 12driver btusb 12v 0.8 12type USB 12rev 2.0 12speed 12 Mb/s 12lanes 1
12mode 1.1 12bus-ID 2-1.4:3 12chip-ID 413c:8187 12class-ID fe01 12serial
12Report btmgmt 12ID hci0 12rfk-id 0 12state down 12bt-service N/A 12rfk-block 12hardware no 12software no
12address N/A
12RAID:
12Hardware-1 Intel 82801 Mobile SATA Controller [RAID mode] 12driver ahci 12v 3.0 12port 5060
12bus-ID 00:1f.2 12chip-ID 8086:282a 12rev N/A 12class-ID 0104
12Drives:
12Local Storage 12total 472.99 GiB 12used 29.4 GiB (6.2%)
12ID-1 /dev/sda 12maj-min 8:0 12vendor Seagate 12model ST500LM000-1EJ162 12family Laptop SSHD
12size 465.76 GiB 12block-size 12physical 4096 B 12logical 512 B 12sata 3.1 12speed 6.0 Gb/s 12tech HDD
12rpm 5400 12serial 12fw-rev DEMG 12temp 41 C
12SMART yes 12state enabled 12health PASSED 12on 1y 24d 21h 12cycles 2169 12read 510.67 TiB
12written 13.06 TiB 12Pre-Fail 12attribute Spin_Retry_Count 12value 100 12worst 100 12threshold 97
12ID-2 /dev/sdb 12maj-min 8:16 12model USB FLASH DRIVE 12size 7.23 GiB 12block-size 12physical 512 B
12logical 512 B 12type USB 12rev 2.0 12spd 480 Mb/s 12lanes 1 12mode 2.0 12tech SSD 12serial 12fw-rev 1100
12SMART Message Unknown USB bridge. Flash drive/Unsupported enclosure?
12Partition:
12ID-1 / 12raw-size 73.24 GiB 12size 71.54 GiB (97.68%) 12used 29.23 GiB (40.9%) 12fs ext4
12block-size 4096 B 12dev /dev/sda2 12maj-min 8:2
12Swap:
12Alert No swap data was found.
12Sensors:
12System Temperatures 12cpu 56.0 C 12mobo 37.0 C 12sodimm SODIMM C 12gpu nouveau 12temp 53.0 C
12Fan Speeds (rpm) 12cpu 2899
12Info:
12Processes 0 12Uptime 1h 43m 12wakeups 0 12Memory 12total 8 GiB 12available 7.64 GiB 12used 2.56 GiB (33.5%)
12igpu 64 MiB 12Init systemd 12v 255 12default graphical 12tool systemctl 12Compilers 12gcc 13.2.1 12clang 16.0.6
12Packages 12pm pacman 12pkgs 1157 12libs 274 12tools yay 12Client Unknown Client: systemd 12inxi 3.3.31

ricklinux · January 2, 2024, 10:46pm

This is hard to read this way. You could edit the post and just provide the link.

xenotek · January 3, 2024, 9:50am

FTS, 4 x black screens in 3 months and multiple other users with same unresolved issues.

i realise this is community supported, but too many issues at the moment. maybe my hardware too old, i dont know, but i cant sit for days trying to figure out drivers, chroot, etc, etc.

i jumped ship, trying out manjaro. if this fails, W10 it will be.

Bryanpwo · January 3, 2024, 9:54am

I think you’re better off using Debian, since the issue is related to the kernel and given the age of your hardware.

Just a note, we don’t modify the upstream packages and Debian is known for supporting a very wide range of hardware.

xenotek · January 3, 2024, 10:22am

i was looking at MX Linux. will give it a try if manjaro does not cut it.

BONK · January 3, 2024, 11:12am

You probably won’t like manjaro any more then Arch most likely less as they hold packages back and some package themselves and actually see more breakages then normal Arch. You also will not receive the same level of friendly support you receive in this forum. Mx is a good choice. Linux mint may also be a good fit for your needs.

Nomad · January 3, 2024, 1:02pm

This might not make sense to you on the surface, but I had plenty of issues on my newer hardware that would result in black screens after updates, and I narrowed it down to the incompatible older kernel I had installed alongside the mainline. I would suggest before giving up to try and remove the LTS kernel and only use the mainline one. See if that stops the black screens after updates. If that doesn’t work then, as @Bryanpwo suggested, maybe Debian is a better option for you.

xenotek · January 3, 2024, 1:58pm

mainline kernel boots to the black screen straight after install. that is why i am using the LTS.

Trying manjaro now. if it fails as well i will give MX a try. at the moment MX is no 1 on distrowatch and debian based with KDE version available.

mint does not look like it has a KDE version nad is ubuntu based which i absolutely hate after breaking a few times. I moved to EOS after ubuntu and was very with it for about 2.5 years.

ricklinux · January 3, 2024, 2:11pm

Was it working originally and stopped working after an update?

Edit: Does it work on the live ISO?

Nomad · January 3, 2024, 4:01pm

Do you happen to use ventoy or do you write your ISO images directly to USB?

Why Manjaro? Instead of hopping distro to disto for the sake of finding what works, why not stick to what you actually like and find the solution to your problem. This is Linux we’re talking, there’s almost always a solution. If I had weeks straight of issues on EOS, I still wouldn’t consider Manjaro. A big part of using Linux is to understand your system and how it works with your hardware. You learn a lot in the process of fixing issues.

herbie · January 3, 2024, 10:22pm

Do you have intel driver installed. Perhaps even 20-intel.conf in
/etc/X11/xorg.conf.d/20intel.conf
Remove the above via a root login on a CtrlAlr/F2
maybe?
llvmpipe was what caused me to suggest as I had the same problem on a diff os.

thefrog · January 4, 2024, 6:14am

FIFY

xenotek · January 4, 2024, 8:53am

FFS

Kresimir · January 4, 2024, 10:40am

I agree with @Bryanpwo, Debian seems like the best distro for you.