My Menubar in Xfce Terminal Disappeared

Hi,

The menu bar does not appear/terminal and if I right click on the background and select the option… it appears, but when I close and open it again, it disappears …

Thhanks

Hi @Won ,
Sorry, which Destop Enviroment do you use? Is it Gnome?

need a lot more info for other to help look to the top left of the forum website, see where it says help? click forum log tool and follow further

Sorry, lack of attention …

won@won-hpprobook455156inchg10notebookpc ~$ inxi -Fxxc0z
System:
  Kernel: 6.6.57-1-lts arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.43 wm: xfwm4 dm: LightDM
    Distro: EndeavourOS base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP ProBook 455 15.6 inch G10 Notebook PC
    v: SBKPF serial: <superuser required> Chassis: type: 10
    serial: <superuser required>
  Mobo: HP model: 8B5C v: KBC Version 53.24.00 serial: <superuser required>
    part-nu: 7P3B4UT#ABA UEFI: HP v: 78 Ver. 01.04.01 date: 11/10/2023
Battery:
  ID-1: BAT0 charge: 34.2 Wh (78.8%) condition: 43.4/42.8 Wh (101.5%)
    volts: 12.2 min: 11.4 model: Hewlett-Packard Primary serial: <filter>
    status: not charging
CPU:
  Info: 8-core model: AMD Ryzen 7 7730U with Radeon Graphics bits: 64
    type: MT MCP arch: Zen 3 rev: 0 cache: L1: 512 KiB L2: 4 MiB L3: 16 MiB
  Speed (MHz): avg: 400 min/max: 400/4546 cores: 1: 400 2: 400 3: 400 4: 400
    5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 400 14: 400
    15: 400 16: 400 bogomips: 63917
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: Advanced Micro Devices [AMD/ATI] Barcelo vendor: Hewlett-Packard
    driver: amdgpu v: kernel arch: GCN-5 pcie: speed: 8 GT/s lanes: 16 ports:
    active: eDP-1 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 04:00.0 chip-ID: 1002:15e7
    temp: 51.0 C
  Device-2: Quanta HP HD Camera driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 bus-ID: 3-4:2 chip-ID: 0408:5483
  Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.3
    compositor: xfwm4 v: 4.18.0 driver: X: loaded: amdgpu unloaded: modesetting
    alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0.0
    screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96
  Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x1512 res: 1920x1080
    dpi: 142 diag: 394mm (15.5")
  API: EGL v: 1.5 platforms: device: 0 drv: radeonsi device: 1 drv: swrast
    gbm: drv: kms_swrast surfaceless: drv: radeonsi x11: drv: radeonsi
    inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.2.5-arch1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi
    renoir LLVM 18.1.8 DRM 3.54 6.6.57-1-lts) device-ID: 1002:15e7
Audio:
  Device-1: Advanced Micro Devices [AMD/ATI] Renoir Radeon High Definition
    Audio driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s lanes: 16
    bus-ID: 04:00.1 chip-ID: 1002:1637
  Device-2: Advanced Micro Devices [AMD] ACP/ACP3X/ACP6x Audio Coprocessor
    vendor: Hewlett-Packard driver: N/A pcie: speed: 8 GT/s lanes: 16
    bus-ID: 04:00.5 chip-ID: 1022:15e2
  Device-3: Advanced Micro Devices [AMD] Family 17h/19h HD Audio
    vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: speed: 8 GT/s
    lanes: 16 bus-ID: 04:00.6 chip-ID: 1022:15e3
  API: ALSA v: k6.6.57-1-lts status: kernel-api
  Server-1: PipeWire v: 1.2.5 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel pcie: speed: 2.5 GT/s
    lanes: 1 port: 2000 bus-ID: 01:00.0 chip-ID: 10ec:8168
  IF: enp1s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter
    driver: mt7921e v: kernel pcie: speed: 5 GT/s lanes: 1 bus-ID: 02:00.0
    chip-ID: 14c3:0616
  IF: wlan0 state: down mac: <filter>
Bluetooth:
  Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 bus-ID: 1-3:3 chip-ID: 0e8d:223c
  Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: disabled
    rfk-block: hardware: no software: no address: N/A
Drives:
  Local Storage: total: 476.94 GiB used: 29.56 GiB (6.2%)
  ID-1: /dev/nvme0n1 vendor: Western Digital model: WD PC SN740
    SDDPNQD-512G-2006 size: 476.94 GiB speed: 63.2 Gb/s lanes: 4
    serial: <filter> temp: 28.9 C
Partition:
  ID-1: / size: 34.78 GiB used: 29.45 GiB (84.7%) fs: ext4 dev: /dev/nvme0n1p4
  ID-2: /boot/efi size: 1.48 GiB used: 108.4 MiB (7.1%) fs: vfat
    dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: partition size: 1.37 GiB used: 0 KiB (0.0%) priority: -2
    dev: /dev/nvme0n1p2
Sensors:
  System Temperatures: cpu: 58.0 C mobo: 32.0 C gpu: amdgpu temp: 50.0 C
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB note: est. available: 14.94 GiB used: 1.89 GiB (12.7%)
  Processes: 313 Power: uptime: 28m wakeups: 0 Init: systemd v: 256
    default: graphical
  Packages: pm: pacman pkgs: 969 Compilers: clang: 18.1.8 gcc: 14.2.1
    Shell: Bash v: 5.2.37 running-in: xfce4-terminal inxi: 3.3.36
won@won-hpprobook455156inchg10notebookpc ~$ 

Which one do you mean? Maybe xfce4-terminal?
You might want to use some translation software/website to help communication :man_shrugging:

You may want to inspect configuration file contents for xfce4-terminal ( ~/.config/xfce4/terminal/ ) or search settings with dconf-editor.

You may find relevant messages in ~/.xsession-errors, or in the system journal (using journalctl command).

I think they may mean the menu bar in the terminal but totally get the confusion

Yes, xfce4-terminal menu-bar
/home/won/.config/xfce4/terminal/

[Configuration]
BackgroundDarkness=0.920000
MiscSearchDialogOpacity=100
MiscShowUnsafePasteDialog=FALSE
BackgroundMode=TERMINAL_BACKGROUND_TRANSPARENT
MiscAlwaysShowTabs=FALSE
MiscBell=FALSE
MiscBellUrgent=FALSE
MiscBordersDefault=TRUE
MiscCursorBlinks=FALSE
MiscCursorShape=TERMINAL_CURSOR_SHAPE_BLOCK
MiscDefaultGeometry=115x25
MiscInheritGeometry=FALSE
MiscMenubarDefault=FALSE
MiscMouseAutohide=FALSE
MiscMouseWheelZoom=TRUE
MiscToolbarDefault=FALSE
MiscConfirmClose=TRUE
MiscCycleTabs=TRUE
MiscTabCloseButtons=TRUE
MiscTabCloseMiddleClick=TRUE
MiscTabPosition=GTK_POS_TOP
MiscHighlightUrls=TRUE
MiscMiddleClickOpensUri=FALSE
MiscCopyOnSelect=FALSE
MiscShowRelaunchDialog=TRUE
MiscRewrapOnResize=TRUE
MiscUseShiftArrowsToScroll=FALSE
MiscSlimTabs=FALSE
MiscNewTabAdjacent=FALSE
ColorForeground=#e3e3ea
ColorBackground=#08052b
ColorCursor=#ff7f7f
ColorCursorForeground=#FFFFFF
ColorBold=#7fbaff
TabActivityColor=#81813d3d9c9c
ColorCursorUseDefault=FALSE
ColorBoldIsBright=TRUE
ScrollingUnlimited=FALSE
ScrollingLines=50000
FontName=Source Code Pro 10
ColorPalette=rgb(8,5,43);rgb(255,127,127);rgb(127,63,191);rgb(204,57,128);rgb(127,186,255);rgb(127,63,191);rgb(127,127,255);rgb(205,204,219);rgb(127,186,255);rgb(255,127,127);rgb(153,153,204);rgb(255,127,127);rgb(127,127,255);rgb(127,63,191);rgb(127,127,255);rgb(227,227,234)
ScrollingBar=TERMINAL_SCROLLBAR_NONE
MiscRightClickAction=TERMINAL_RIGHT_CLICK_ACTION_CONTEXT_MENU

1 Like

Thought so, one of the first things I remove, same menus available with right click too

I found it, was not checked by default (?)

Thanks!

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.