I’m running Cinnamon DE on EOS in a fresh install. I can’t seem to set the settings for mouse to change the size of the pointer on the screen. You can move the slider, but nothing happens. So I need a specific theme or something?
System:
Kernel: 6.0.12-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
Desktop: Cinnamon v: 5.6.4 tk: GTK v: 3.24.35 vt: 7 dm: LightDM v: 1.32.0
Distro: EndeavourOS base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: NUC-TGL serial: <superuser required>
UEFI: American Megatrends LLC. v: P1.60 date: 10/31/2022
Battery:
Device-1: hidpp_battery_0 model: Logitech M570 serial: <filter> charge: 100%
rechargeable: yes status: discharging
CPU:
Info: quad core model: 11th Gen Intel Core i7-1165G7 bits: 64 type: MT MCP
smt: enabled arch: Tiger Lake rev: 1 cache: L1: 320 KiB L2: 5 MiB L3: 12 MiB
Speed (MHz): avg: 400 min/max: 400/2701 boost: enabled cores: 1: 400
2: 400 3: 400 4: 400 5: 400 6: 400 7: 400 8: 400 bogomips: 44864
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: ASRock
driver: i915 v: kernel arch: Gen-12.1 ports: active: HDMI-A-1 empty: DP-1,
DP-2, DP-3, HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:9a49 class-ID: 0300
Display: x11 server: X.Org v: 21.1.6 driver: X: loaded: intel
unloaded: modesetting alternate: fbdev,vesa dri: i965 gpu: i915
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.00x22.48")
s-diag: 1165mm (45.88")
Monitor-1: HDMI-A-1 mapped: HDMI1 model: Sony TV 30 serial: <filter>
res: 3840x2160 hz: 60 dpi: 68 size: 1440x810mm (56.69x31.89")
diag: 1651mm (65") modes: max: 3840x2160 min: 640x480
API: OpenGL v: 4.6 Mesa 22.3.1 renderer: Mesa Intel Xe Graphics (TGL GT2)
direct render: Yes
Audio:
Device-1: Intel Tiger Lake-LP Smart Sound Audio vendor: ASRock
driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a0c8
class-ID: 0403
Sound API: ALSA v: k6.0.12-arch1-1 running: yes
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.63 running: yes
Network:
Device-1: Intel Ethernet I219-V vendor: ASRock driver: e1000e v: kernel
port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15fc class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie:
speed: 5 GT/s lanes: 1 bus-ID: 59:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlan0 state: down mac: <filter>
Device-3: Intel Ethernet I225-LM vendor: ASRock driver: igc v: kernel
pcie: speed: 5 GT/s lanes: 1 port: N/A bus-ID: 5a:00.0 chip-ID: 8086:15f2
class-ID: 0200
IF: enp90s0 state: down mac: <filter>
IF-ID-1: br0 state: up speed: 1000 Mbps duplex: unknown mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8 bus-ID: 3-9:3
chip-ID: 8087:0029 class-ID: e001
Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: disabled
rfk-block: hardware: no software: no address: see --recommends
Drives:
Local Storage: total: 1.82 TiB used: 166.83 GiB (9.0%)
ID-1: /dev/nvme0n1 vendor: Western Digital model: WD Blue SN570 1TB
size: 931.51 GiB speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 234110WD temp: 32.9 C scheme: GPT
ID-2: /dev/sda vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB
speed: 6.0 Gb/s type: SSD serial: <filter> rev: 1B6Q scheme: GPT
Partition:
ID-1: / size: 931.22 GiB used: 58.41 GiB (6.3%) fs: btrfs
dev: /dev/nvme0n1p2
ID-2: /boot/efi size: 299.4 MiB used: 608 KiB (0.2%) fs: vfat
dev: /dev/nvme0n1p1
ID-3: /home size: 931.22 GiB used: 58.41 GiB (6.3%) fs: btrfs
dev: /dev/nvme0n1p2
ID-4: /var/log size: 931.22 GiB used: 58.41 GiB (6.3%) fs: btrfs
dev: /dev/nvme0n1p2
Swap:
ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 52.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 262 Uptime: 8m wakeups: 5 Memory: 14.97 GiB
used: 2.66 GiB (17.8%) Init: systemd v: 252 default: graphical Compilers:
gcc: 12.2.0 Packages: pm: pacman pkgs: 1149 Shell: Bash v: 5.1.16
running-in: terminator inxi: 3.3.24
