Install with Intel RST

Friends, I have a problem that I would like you to help me to solve if it is possible, in this computer with win8.1 and intel rst the speed with which it turns on and works is amazing, on the other hand when installing linux it is getting slower with time, I have had instead installed win for more than 6 years without having any problem or degradation. I would like to know if any of you are able to help me install with Intel RST in full installation for endeavour the problem is that when following the guide it seems that you have changed commands or something. is where the instructions from intel itself are.
I thank you in advance for your help,

[aldo@aldp-lap ~]$ lsblk
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 500M 0 part /boot/efi
├─sda2 8:2 0 97,7G 0 part /
└─sda3 8:3 0 833,4G 0 part
sdb 8:16 0 29,8G 0 disk
└─sdb1 8:17 0 26,9G 0 part
sr0 11:0 1 62,9M 0 rom
[aldo@aldp-lap ~]$

Translated by

Hello @AlDo
I don’t think you’ll be able to install EndeavourOS using Raid or Intel RST as it’s called. RST isn’t supported under Linux as far as i know. I’m not saying it can’t be done but there is not much benefit to it in Linux and it will be more trouble than it’s worth. Is your intention to install EndeavourOS as the only operating system on this device? If that is so you would be better off to switch the UEFI hardware settings to AHCI and you shouldn’t have any problems. Secure boot and fast boot also need to be disabled.

Hola, revisaste la página de Intel? ellos dicen que es posible y sin problemas, pero algo debió cambiar porque as instrucciones de mdadm no se ejecutan y no logro entender/ver donde está la falla.
Opensuse y algún otro tiene en su instalador la posibiidad de hacer raid y de instalar con RST, lo que me hace presumir que si se puede y además es una mejora interesante.
La alternativa es que cuando tenga dinero (soy pobre y ahora mas con a pandemia) cambie mi hdd por un ssd.
Gracias por tu interés y opinión.

Hi, did you check the Intel page? they say it’s possible and without problems, but something must have changed because as mdadm instructions are not executed and I can’t understand / see where the fault is.
Opensuse and some other have in their installer the possibility of raiding and installing with RST, which I presume is possible and also an interesting improvement.
The alternative is that when I have money (I’m poor and now more with a pandemic) I change my hdd for a ssd.
Thanks for your interest and opinion.

Translated with (free version)

Some versions of RST can be assembled with md. However, that doesn’t mean the installer supports that.

That being said, what are you using RST for that makes it a requirement?

Some additional info if required or it helps.