I’m copying and pasting the log here. I saw something about fat32 error, using ext4 instead, partitiontable type unset error, and eventually it stalled at a pacman keyring command at 10%. Any ideas?
Edit: I think when you select replace a partition, it doesn’t make all the smaller partitions such as the 100mb boot and the other 1gb EFI, So it gets stuck. I think this may be a bug for the devs to look at. I tried again but this time run alongside or whatever the first option was, and it automatically set aside a few partitions and installed correctly.
########## /home/liveuser/endeavour-install.log by eos-install-mode-run-calamares
########## Started (UTC): 03/24/2023 01:47:13 AM
########## Install mode: online
########## ISO version: 2023.03.06
########## Calamares version: 22.12.3.6-1
########## inxi:
CPU:
Info: quad core model: Intel Core i5-8265U bits: 64 type: MT MCP cache: L2: 1024 KiB
Speed (MHz): avg: 1550 min/max: 400/3900 cores: 1: 1800 2: 1800 3: 1800 4: 800 5: 1800 6: 1800
7: 1800 8: 800
Memory:
RAM: total: 7.61 GiB used: 1.85 GiB (24.3%)
RAM Report: permissions: Unable to run dmidecode. Root privileges required.
Graphics:
Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Acer Incorporated ALI driver: i915
v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: HDMI-A-1
bus-ID: 00:02.0 chip-ID: 8086:3ea0 class-ID: 0300
Device-2: Chicony HD WebCam type: USB driver: uvcvideo bus-ID: 1-5:4 chip-ID: 04f2:b5f7
class-ID: 0e02
Display: server: X.Org v: 21.1.7 compositor: xfwm v: 4.18.0 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: iris gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: ChiMei InnoLux 0x15e5 built: 2021 res: 1920x1080 hz: 60 dpi: 142
gamma: 1.2 size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel UHD Graphics 620 (WHL GT2)
direct-render: Yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Acer Incorporated ALI
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 01:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0 state: down mac:
Device-2: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter vendor: Lite-On
driver: ath10k_pci v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0
chip-ID: 168c:003e class-ID: 0280 temp: 39.0 C
IF: wlan0 state: up mac:
>>> Preliminary log before starting calamares:
==> eos-welcome: info: setting timezone to ‘America/Los_Angeles’
==> hotfix-start.bash: info: hotfixes after ISO 2023.03.06
==> Hotfixes definition file from https://gitlab.com/endeavouros-filemirror/ISO-hotfixes/-/raw/main/hotfix-start.bash executed.
==> File settings.conf updated.
<<< End of preliminary log.
18:47:14 [6]: Calamares::Settings::Settings(const QString&, bool)
Using Calamares settings file at “/etc/calamares/settings.conf”
18:47:14 [6]: void Logger::setupLogfile()
Using log file: “/root/.cache/calamares/session.log”
18:47:14 [6]: void CalamaresApplication::init()
Calamares version: 3.3.0-alpha3
… languages: (“ar”, “as”, “ast”, “az”, “az_AZ”, “be”, “bg”, “bn”, “ca”, “ca@valencia”, “cs_CZ”, “da”, “de”, “el”, “en”, “en_GB”, “es”, “es_MX”, “et”, “eu”, “fa”, “fi_FI”, “fr”, “fur”, “gl”, “he”, “hi”, “hr”, “hu”, “id”, “is”, “it_IT”, “ja”, “ko”, “lt”, “ml”, “mr”, “nb”, “nl”, “oc”, “pl”, “pt_BR”, “pt_PT”, “ro”, “ru”, “si”, “sk”, “sl”, “sq”, “sr”, “sr@latin”, “sv”, “tg”, “th”, “tr_TR”, “uk”, “vi”, “zh_CN”, “zh_TW”)
18:47:14 [6]: bool CalamaresUtils::initQmlModulesDir()
Using Calamares QML directory “/usr/share/calamares/qml”
18:47:14 [6]: Calamares::Branding::Branding(const QString&, QObject*)
Using Calamares branding file at “/etc/calamares/branding/endeavouros/branding.desc”
18:47:14 [6]: Calamares::Branding::Branding(const QString&, QObject*)
Loaded branding component “endeavouros”
… Loaded QRC translation “tz_” “en_US”
… Loaded QRC translation “calamares_” “en_US”
… STARTUP: initSettings, initQmlPath, initBranding done
… STARTUP: initModuleManager: module init started
18:47:14 [6]: void Calamares::ModuleManager::doInit()
Found 48 modules
18:47:14 [6]: void CalamaresApplication::initView()
STARTUP: initModuleManager: all modules init done
18:47:14 [6]: void CalamaresApplication::initView()
STARTUP: initJobQueue done
18:47:14 [6]: CalamaresWindow::CalamaresWindow(QWidget*)
Available desktop QSize(1920, 1046) minimum size QSize(1024, 520)
… Proposed window size: 1215 715
18:47:14 [6]: void CalamaresApplication::initView()
STARTUP: CalamaresWindow created; loadModules started
18:47:14 [6]: void Config::initLanguages()
Trying to match locale “en_US”
18:47:14 [6]: void Config::initLanguages()
Trying to match locale QLocale(English, Latin, United States)
18:47:14 [6]: void Config::setLocaleIndex(int)
Index 14 Selected locale “en”
… Loading “calamares-endeavouros_en” from “/etc/calamares/branding/endeavouros/lang”
… Branding no translation for “en” using default (en)
… Loaded QRC translation “tz_” “en”
… Loaded QRC translation “calamares_” “en”
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “welcome@online” loading complete.
18:47:15 [6]: QStringList loadLocales(const QString&)
Loading locales from “/usr/share/i18n/SUPPORTED”
… Read 492 lines
… After filtering 317 lines
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “locale@locale” loading complete.
18:47:15 [6]: KeyboardModelsModel::KeyboardModelsModel(QObject*)
Loaded 189 keyboard models
18:47:15 [6]: KeyboardPage::KeyboardPage(Config*, QWidget*)
Variants now total= 0 selected= -1
… Loaded QRC translation “kb_” “en”
18:47:15 [6]: void Config::detectCurrentKeyboardLayout()
(“pc”, “us”, “inet(evdev)"”)
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “keyboard@keyboard” loading complete.
18:47:15 [6]: void fillModel(PackageListModel*, const QVariantList&)
Loading PackageChooser model items from config
… Loaded PackageChooser with 10 entries.
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “packagechooser@packagechooser” loading complete.
18:47:15 [6]: void Config::setConfigurationMap(const QVariantMap&)
Loading netinstall from 1 alternate sources.
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “netinstall@netinstall” loading complete.
18:47:15 [6]: virtual void Config::setConfigurationMap(const QVariantMap&)
Using module ID “packagechooserq@packagechooserq”
18:47:15 [2]: virtual void Calamares::QmlViewStep::setConfigurationMap(const QVariantMap&)
WARNING: Bad QML search mode set for “packagechooserq@packagechooserq”
18:47:15 [6]: QString CalamaresUtils::searchQmlFile(QmlSearch, const QString&, const Calamares::ModuleSystem::InstanceKey&)
Looking for QML for “packagechooserq@packagechooserq”
… Looking at QML file “/etc/calamares/branding/endeavouros/packagechooserq@packagechooserq.qml”
… Looking at QML file “/etc/calamares/branding/endeavouros/packagechooserq.qml”
… Looking at QML file “:/packagechooserq@packagechooserq.qml”
… Looking at QML file “:/packagechooserq.qml”
18:47:15 [6]: virtual void Calamares::QmlViewStep::setConfigurationMap(const QVariantMap&)
QmlViewStep “packagechooserq@packagechooserq” loading “qrc:/packagechooserq.qml”
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “packagechooserq@packagechooserq” loading complete.
18:47:15 [6]: CalamaresUtils::Partition::InternalManager::InternalManager()
KPMCore backend starting …
18:47:15 [6]: Loaded backend plugin: “pmsfdiskbackendplugin”
… Backend @0x5565db2756c0 “pmsfdiskbackendplugin” “1”
18:47:15 [2]: virtual void PartitionViewStep::setConfigurationMap(const QVariantMap&)
WARNING: Partition-module setting defaultPartitionTableType is unset, will use gpt for efi or msdos for bios
18:47:15 [2]: QString PartUtils::canonicalFilesystemName(const QString&, FileSystem::Type*)
WARNING: Filesystem “unknown” not found, using ext4
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “partition@partition” loading complete.
… minLength set to 1
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “users@users” loading complete.
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “summary@summary” loading complete.
18:47:15 [2]: void Calamares::Module::loadConfigurationFile(const QString&)
WARNING: No config file for “hardwaredetect” found anywhere at
“/etc/calamares/modules/hardwaredetect.conf”
“/usr/share/calamares/modules/hardwaredetect.conf”
18:47:15 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
QML import paths:
“/usr/share/calamares/qml”
“/usr/bin”
“qrc:/qt-project.org/imports”
“/usr/lib/qt/qml”
18:47:15 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
QML load on startup, API 2.
18:47:15 [2]: QThread::setPriority: Cannot set priority, thread is not running
18:47:15 [6]: void Calamares::ModuleManager::loadModules()
Module “partition@partition” already loaded.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “shellprocess@initialize_pacman” loading complete.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “machineid@machineid” loading complete.
18:47:15 [6]: void Calamares::ModuleManager::loadModules()
Module “locale@locale” already loaded.
18:47:15 [6]: void Calamares::ModuleManager::loadModules()
Module “keyboard@keyboard” already loaded.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “userpkglist@userpkglist” loading complete.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “luksbootkeyfile@luksbootkeyfile” loading complete.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “dracutlukscfg@dracutlukscfg” loading complete.
18:47:15 [6]: void Calamares::ModuleManager::loadModules()
Module “users@users” already loaded.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “shellprocess@removeucode” loading complete.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “preservefiles@preservefiles” loading complete.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “shellprocess@copyfiles” loading complete.
18:47:15 [6]: virtual void Calamares::CppJobModule::loadSelf()
CppJobModule “umount@umount” loading complete.
18:47:15 [6]: virtual void Calamares::ViewModule::loadSelf()
ViewModule “finished@finished” loading complete.
18:47:15 [6]: void LoaderQueue::fetch(const QUrl&)
NetInstall loading groups from QUrl(“file:///etc/calamares/modules/netinstall.yaml”)
18:47:15 [6]: void CalamaresApplication::initViewSteps()
STARTUP: loadModules for all modules done
18:47:15 [6]: void Calamares::ModuleManager::checkRequirements()
Checking module requirements …
18:47:15 [6]: void CalamaresApplication::initViewSteps()
STARTUP: Window now visible and ProgressTreeView populated
… 11 view steps loaded.
… Loaded QRC translation “kb_” “en”
18:47:15 [6]: void LoaderQueue::dataArrived()
NetInstall group data received 14144 bytes from QUrl(“file:///etc/calamares/modules/netinstall.yaml”)
18:47:15 [6]: void Config::xkbApply()
xkbmap selection changed to: “us” - “”
18:47:15 [6]: void Calamares::SlideshowQML::loadQmlV2Complete()
QML component complete, API 2
18:47:15 [6]: getting temp failed for “/dev/nvme0n1” : Success
18:47:15 [6]: getting powered on time failed for “/dev/nvme0n1” : Success
18:47:15 [6]: getting power cycles failed for “/dev/nvme0n1” : Success
… Loading “/etc/calamares/branding/endeavouros/show.qml”
18:47:15 [6]: void Calamares::QmlViewStep::loadComplete()
QML component “qrc:/packagechooserq.qml” QQmlComponent::Ready
… QML component complete “qrc:/packagechooserq.qml” creating object
18:47:15 [2]: unknown file system type “” on “/dev/nvme0n1p2”
18:47:15 [6]: 96062463 20073342 4096
18:47:15 [6]: 13311999 4484156 4096
18:47:16 [6]: 262143 71867 4096
18:47:16 [6]: QStringList CalamaresUtils::GeoIP::getElementTexts(const QByteArray&, const QString&)
GeoIP found 1 elements
18:47:16 [6]: setGeoIP(Config*, const QVariantMap&)::<lambda()>
GeoIP result for welcome= “US”
18:47:16 [6]: void setCountry(Config*, const QString&, CalamaresUtils::GeoIP::Handler*)
Unusable country code “US”
… Obtained from “https://geoip.kde.org/v1/ubiquity” ( 2 “CountryCode” )
18:47:16 [6]: bool GeneralRequirements::checkHasPower()
A battery exists, checking for mains power.
18:47:16 [6]: Calamares::RequirementsList GeneralRequirements::checkRequirements()
GeneralRequirements output:
storage : 5905580032
enoughStorage : true
RAM : 1503238553
enoughRam : true
hasPower : true
hasInternet : true
isRoot : true
18:47:16 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
Got 6 requirement results from “welcome”
18:47:16 [6]: QList<Device*> PartUtils::getDevices(DeviceType)
Removing unsuitable devices: 2 candidates.
… Running (“blkid”, “/dev/nvme0n1”)
18:47:16 [6]: void Calamares::RequirementsChecker::reportProgress()
Remaining modules: 1
“partition”
… Running (“blkid”, “/dev/nvme0n1p1”)
… Running (“blkid”, “/dev/nvme0n1p2”)
… Running (“blkid”, “/dev/nvme0n1p3”)
… Running (“blkid”, “/dev/nvme0n1p6”)
… Running (“blkid”, “/dev/nvme0n1p4”)
… Running (“blkid”, “”)
… Target cmd: (“blkid”, “”) Exit code: 2 (no output)
… Running (“blkid”, “/dev/nvme0n1p5”)
… Running (“blkid”, “/dev/sda”)
… Running (“blkid”, “/dev/sda1”)
… there are 2 devices left.
18:47:16 [6]: void PartitionCoreModule::doInit()
LIST OF DETECTED DEVICES:
… node capacity name prettyName
… “/dev/nvme0n1” 512105932800 DevName$1858df7 DevNamePretty$c3a18557
… “/dev/sda” 1000202273280 DevName$aedc2bd7 DevNamePretty$b8e84cf5
… 2 devices detected.
18:47:16 [1]: OsproberEntryList PartUtils::runOsprober(DeviceModel*)
ERROR: os-prober cannot start.
18:47:16 [6]: OsproberEntryList PartUtils::runOsprober(DeviceModel*)
os-prober gave no output.
18:47:17 [6]: void PartitionCoreModule::scanForEfiSystemPartitions()
system is EFI and new EFI system partition has been found.
18:47:17 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
Got 1 requirement results from “partition”
18:47:17 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
18:47:17 [6]: void ChoicePage::updateDeviceStatePreview()
Updating partitioning state widgets.
18:47:17 [6]: void ChoicePage::setupActions()
Setting up actions for “/dev/nvme0n1” with 0 entries.
… Can not resize “/dev/nvme0n1p1” , filesystem “fat32” does not support resize.
… Checking if “/dev/nvme0n1p1” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 104857600 “(0GiB)”
… Can not resize “/dev/nvme0n1p2” , filesystem “unknown” does not support resize.
… Checking if “/dev/nvme0n1p2” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 16777216 “(0GiB)”
… Partition “/dev/nvme0n1p3” authorized for resize + autopartition install.
… contains resizable “/dev/nvme0n1p3”
… Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
… contains replaceable “/dev/nvme0n1p3”
… Can not resize “/tmp/calamares-root-pmoq058h” , partition is mounted
… Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
… Partition “/dev/nvme0n1p4” authorized for resize + autopartition install.
… contains resizable “/dev/nvme0n1p4”
… Checking if “/dev/nvme0n1p4” can be replaced.
… Partition “/dev/nvme0n1p4” authorized for replace install.
… contains replaceable “/dev/nvme0n1p4”
… Can not resize “/dev/nvme0n1” , filesystem “unknown” does not support resize.
… Checking if “/dev/nvme0n1” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1048576 “(0GiB)”
… NO, insufficient storage
Required storage B: 8589934592 “(8GiB)”
Available storage B: 294371328 “(0GiB)” for “/dev/nvme0n1p5” length: 2097152 sectorsUsed: 1522208 fsType: “ntfs”
… Checking if “/dev/nvme0n1p5” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1073741824 “(1GiB)”
18:47:17 [6]: ChoicePage::setupActions()::<lambda()>
Setting texts for 0 osprober entries
18:47:17 [6]: void ChoicePage::setupActions()
No partitions ( any-mounted? true is-raid? false ) for erase-action.
18:47:17 [6]: void ChoicePage::continueApplyDeviceChoice()
Previous device -1 new device 0
18:47:17 [6]: void ChoicePage::applyActionChoice(InstallChoice)
Prev -1 InstallChoice Config::NoChoice “none”
18:47:17 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
18:47:17 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
Updating partitioning preview widgets.
18:47:17 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
18:47:17 [6]: bool ChoicePage::calculateNextEnabled() const
No partitioning choice has been made yet
18:47:17 [6]: void Calamares::RequirementsChecker::finished()
All requirements have been checked.
18:47:17 [6]: void Calamares::RequirementsModel::describe() const
Requirements model has 7 items
… requirement 0 “storage” satisfied? true mandatory? false
… requirement 1 “ram” satisfied? true mandatory? true
… requirement 2 “power” satisfied? true mandatory? false
… requirement 3 “internet” satisfied? true mandatory? true
… requirement 4 “root” satisfied? true mandatory? false
… requirement 5 “screen” satisfied? true mandatory? false
… requirement 6 “partitions” satisfied? true mandatory? true
18:47:19 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping “en” in “US” to locale.
… Got best match for “en” as “en_ZW.UTF-8”
… Got best match for “en_US” as “en_US.UTF-8”
18:47:19 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping “en” in “US” to locale.
… Got best match for “en” as “en_ZW.UTF-8”
… Got best match for “en_US” as “en_US.UTF-8”
18:47:19 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping “en” in “US” to locale.
… Got best match for “en” as “en_ZW.UTF-8”
… Got best match for “en_US” as “en_US.UTF-8”
18:47:20 [6]: void Config::guessLocaleKeyboardLayout()
Got locale language “en_US.UTF-8”
… looking for locale part “US”
… matched “us”
18:47:20 [6]: void guessLayout(const QStringList&, KeyboardLayoutModel*, KeyboardVariantsModel*)
Next level: “en”
18:47:21 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
Mapping “en_US.UTF-8” in “US” to locale.
… Got best match for “en_US.UTF-8” as “en_US.UTF-8”
18:47:23 [6]: void Config::guessLocaleKeyboardLayout()
Got locale language “en_US.UTF-8”
… looking for locale part “US”
… matched “us”
18:47:23 [6]: void guessLayout(const QStringList&, KeyboardLayoutModel*, KeyboardVariantsModel*)
Next level: “en”
18:47:37 [6]: void Config::updateGlobalStorage(const QStringList&) const
QPair(“packagechooser”,“packagechooser”) groups to select in netinstall (“XFCE4-Desktop”)
18:47:39 [6]: bool additions(Calamares::GlobalStorage*, const QString&, const QVariantList&, const QVariantList&)
Existing package operations length 0
… 154 critical packages.
… 4 non-critical packages.
18:47:39 [6]: void CalamaresUtils::callQmlFunction(QQuickItem*, const char*)
QML “onActivate()” is missing.
18:47:40 [6]: virtual void PartitionViewStep::onActivate()
The bootloader is “systemd-boot”
18:47:40 [6]: virtual void PartitionViewStep::onActivate()
The efi location is “/efi”
18:47:40 [6]: virtual void PartitionViewStep::onActivate()
The bootloader is “systemd-boot”
18:47:40 [6]: virtual void PartitionViewStep::onActivate()
The efi location is “/efi”
18:47:42 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
18:47:42 [6]: void ChoicePage::applyActionChoice(InstallChoice)
Prev -1 InstallChoice Config::Replace “replace”
18:47:42 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
18:47:42 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
Updating partitioning preview widgets.
18:47:42 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
18:47:42 [6]: bool ChoicePage::calculateNextEnabled() const
No partition selected for alongside or replace
18:47:45 [6]: QML Component (default slideshow) Next slide
18:47:46 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:46 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:52 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:52 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:52 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p5” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1073741824 “(1GiB)”
18:47:53 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:53 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:53 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:54 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p5” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1073741824 “(1GiB)”
18:47:55 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p5” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1073741824 “(1GiB)”
18:47:56 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:56 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:56 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:56 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:56 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:47:59 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
18:47:59 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
18:47:59 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p4” can be replaced.
… Partition “/dev/nvme0n1p4” authorized for replace install.
18:48:01 [6]: PartitionBarsView::PartitionBarsView(QWidget*)::<lambda(const QModelIndex&)>
Clicked row 3
18:48:01 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p5” can be replaced.
… NO, insufficient storage
Required storage B: 6442450944 “(5.5GiB)”
Available storage B: 1073741824 “(1GiB)”
18:48:01 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:01 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:01 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:01 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:01 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:01 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:02 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
18:48:02 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
18:48:02 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
18:48:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:06 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:06 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:15 [6]: QML Component (default slideshow) Next slide
18:48:22 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:22 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:23 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:32 [6]: void ChoicePage::applyActionChoice(InstallChoice)
Prev -1 InstallChoice Config::Manual “manual”
18:48:32 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
Updating partitioning preview widgets.
18:48:32 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/dev/nvme0n1p3” can be replaced.
… Partition “/dev/nvme0n1p3” authorized for replace install.
18:48:33 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:33 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:34 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:34 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
Checking if “/tmp/calamares-root-pmoq058h” can be replaced.
… NO, it is mounted.
18:48:45 [6]: QML Component (default slideshow) Next slide