Gelöschter Drucker druckt wieder

EOS Deutsch
1

Hallo!
Ich habe einen Drucker gelöscht und unter http://localhost:631/printers/ steht er auch nicht mehr, ebenso in den Druckereinstellungen.
Nach einem Neustart sieht es so aus:

grafik

Wenn ich aber im Firefox, Libreoffice, Betterbird, Gimp etc. drucken möchte steht er wieder zur Auswahl.
Wähle ich ihn aus dann wird auch wieder eine Druckerwarteschlange angelegt.

grafik

Wo kommt der Drucker her und wie bekomme ich ihn dauerhaft gelöscht?

Vielen Dank im voraus.

MfG R.Lehmeier

P.S.
Mein System:

inxi -Fxxxz
System:
  Kernel: 6.11.3-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
    clocksource: tsc
  Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.43 wm: xfwm4 v: 4.18.0
    with: plank,xfce4-panel tools: xfce4-screensaver vt: 2 dm: SDDM
    Distro: EndeavourOS base: Arch Linux
Machine:
  Type: Desktop Mobo: Gigabyte model: X670 AORUS ELITE AX v: x.x
    serial: <superuser required> uuid: <superuser required> UEFI: American
    Megatrends LLC. v: F32b date: 09/03/2024
CPU:
  Info: 12-core model: AMD Ryzen 9 7900X bits: 64 type: MT MCP smt: enabled
    arch: Zen 4 rev: 2 cache: L1: 768 KiB L2: 12 MiB L3: 64 MiB
  Speed (MHz): avg: 3006 min/max: 545/5733 boost: enabled cores: 1: 3006
    2: 3006 3: 3006 4: 3006 5: 3006 6: 3006 7: 3006 8: 3006 9: 3006 10: 3006
    11: 3006 12: 3006 13: 3006 14: 3006 15: 3006 16: 3006 17: 3006 18: 3006
    19: 3006 20: 3006 21: 3006 22: 3006 23: 3006 24: 3006 bogomips: 225276
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 31 [Radeon RX 7900 XT/7900
    XTX/7900 GRE/7900M] vendor: Sapphire PULSE driver: amdgpu v: kernel
    arch: RDNA-3 pcie: speed: 16 GT/s lanes: 16 ports: active: DP-1,DP-2
    empty: HDMI-A-1,HDMI-A-2,Writeback-1 bus-ID: 03:00.0 chip-ID: 1002:744c
    class-ID: 0300
  Device-2: Advanced Micro Devices [AMD/ATI] Raphael vendor: Gigabyte
    driver: amdgpu v: kernel arch: RDNA-2 pcie: speed: 16 GT/s lanes: 16 ports:
    active: none empty: DP-3, DP-4, DP-5, HDMI-A-3, Writeback-2
    bus-ID: 17:00.0 chip-ID: 1002:164e class-ID: 0300 temp: 44.0 C
  Device-3: SunplusIT Depstech webcam driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-5:2 chip-ID: 1bdf:5050
    class-ID: 0102 serial: <filter>
  Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.2
    compositor: xfwm4 v: 4.18.0 driver: X: loaded: amdgpu
    unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 5375x1511 s-dpi: 96 s-size: 1422x400mm (55.98x15.75")
    s-diag: 1477mm (58.16")
  Monitor-1: DP-1 mapped: DisplayPort-0 pos: primary,right
    model: Samsung U32J59x serial: <filter> res: 2688x1512 hz: 60 dpi: 98
    size: 697x392mm (27.44x15.43") diag: 800mm (31.5") modes: max: 3840x2160
    min: 720x400
  Monitor-2: DP-2 mapped: DisplayPort-1 pos: left model: Samsung U32J59x
    serial: <filter> res: 2688x1512 hz: 60 dpi: 98
    size: 697x392mm (27.44x15.43") diag: 800mm (31.5") modes: max: 3840x2160
    min: 720x400
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: radeonsi device: 2 drv: swrast gbm: drv: kms_swrast
    surfaceless: drv: radeonsi x11: drv: radeonsi inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.2.4-arch1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 7900 XT (radeonsi
    navi31 LLVM 18.1.8 DRM 3.59 6.11.3-arch1-1) device-ID: 1002:744c
  API: Vulkan v: 1.3.295 layers: 9 surfaces: xcb,xlib device: 0
    type: discrete-gpu driver: amd device-ID: 1002:744c device: 1
    type: integrated-gpu driver: amd device-ID: 1002:164e
Audio:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 31 HDMI/DP Audio
    driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s lanes: 16
    bus-ID: 03:00.1 chip-ID: 1002:ab30 class-ID: 0403
  Device-2: Advanced Micro Devices [AMD/ATI] Rembrandt Radeon High
    Definition Audio driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s
    lanes: 16 bus-ID: 17:00.1 chip-ID: 1002:1640 class-ID: 0403
  Device-3: Advanced Micro Devices [AMD] Family 17h/19h HD Audio
    vendor: Gigabyte driver: snd_hda_intel v: kernel pcie: speed: 16 GT/s
    lanes: 16 bus-ID: 17:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Device-4: SunplusIT Depstech webcam driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 bus-ID: 3-5:2 chip-ID: 1bdf:5050
    class-ID: 0102 serial: <filter>
  Device-5: C-Media Audio Adapter (Unitek Y-247A)
    driver: cmedia_hs100b,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
    lanes: 1 bus-ID: 9-1.4:6 chip-ID: 0d8c:0014 class-ID: 0300
  API: ALSA v: k6.11.3-arch1-1 status: kernel-api
  Server-1: sndiod v: N/A status: off
  Server-2: PipeWire v: 1.2.5 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin
Network:
  Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
    pcie: speed: 5 GT/s lanes: 1 port: e000 bus-ID: 10:00.0 chip-ID: 10ec:8125
    class-ID: 0200
  IF: enp16s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter
    driver: mt7921e v: kernel pcie: speed: 5 GT/s lanes: 1 bus-ID: 11:00.0
    chip-ID: 14c3:0616 class-ID: 0280
  IF: wlan0 state: down mac: <filter>
Bluetooth:
  Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 bus-ID: 3-7:4 chip-ID: 0e8d:0616 class-ID: e001
    serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: disabled
    rfk-block: hardware: no software: no address: N/A
Drives:
  Local Storage: total: 5.57 TiB used: 1.29 TiB (23.1%)
  ID-1: /dev/nvme0n1 vendor: Samsung model: SSD 990 PRO 2TB size: 1.82 TiB
    speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QJXD7
    temp: 42.9 C scheme: GPT
  ID-2: /dev/sda vendor: Western Digital model: WD40EFRX-68N32N0
    size: 3.64 TiB type: USB rev: 3.1 spd: 5 Gb/s lanes: 1 tech: HDD rpm: 5400
    serial: <filter> fw-rev: 1021 scheme: GPT
  ID-3: /dev/sdg vendor: Kingston model: DataTraveler 3.0 size: 115.59 GiB
    type: USB rev: 3.2 spd: 5 Gb/s lanes: 1 tech: N/A serial: <filter>
    fw-rev: PMAP scheme: MBR
Partition:
  ID-1: / size: 195.31 GiB used: 58.78 GiB (30.1%) fs: btrfs
    dev: /dev/nvme0n1p2
  ID-2: /boot/efi size: 2 GiB used: 584 KiB (0.0%) fs: vfat
    dev: /dev/nvme0n1p1
  ID-3: /home size: 1.63 TiB used: 1.02 TiB (62.5%) fs: btrfs
    dev: /dev/nvme0n1p3
  ID-4: /var/log size: 195.31 GiB used: 58.78 GiB (30.1%) fs: btrfs
    dev: /dev/nvme0n1p2
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 46.9 C mobo: 38.0 C
  Fan Speeds (rpm): N/A
  GPU: device: amdgpu temp: 45.0 C device: amdgpu temp: 47.0 C mem: 53.0 C
    fan: 0 watts: 25.00
Info:
  Memory: total: 128 GiB note: est. available: 124.92 GiB
    used: 10.52 GiB (8.4%)
  Processes: 537 Power: uptime: 2h 21m states: freeze,mem,disk suspend: deep
    wakeups: 0 hibernate: platform Init: systemd v: 256 default: graphical
  Packages: 2364 pm: pacman pkgs: 2359 pm: flatpak pkgs: 5 Compilers:
    clang: 18.1.8 gcc: 14.2.1 Shell: Bash v: 5.2.37 running-in: yakuake
    inxi: 3.3.36
2

Falls noch mehr Angaben benötigt werden:

printers.conf:

# Printer configuration file for CUPS v2.4.10
# Written by cupsd
# DO NOT EDIT THIS FILE WHEN CUPSD IS RUNNING
NextPrinterId 32
<DefaultPrinter Boomaga>
PrinterId 3
UUID urn:uuid:c49d205c-1676-3619-6ceb-8f998bb110bf
Info Boomaga
MakeModel Boomaga printer
DeviceURI boomaga:/
State Idle
StateTime 1728714452
ConfigTime 1727375779
Type 8392732
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
Option outputorder reverse
Option print-quality 3
</DefaultPrinter>
<Printer EPSON-ET-7750-Series_LAN>
PrinterId 29
UUID urn:uuid:0ad80deb-9e8c-3d96-658d-ce8b1c13f859
AuthInfoRequired none
Info EPSON ET-7750 Series_LAN
Location Hinteres Zimmer
MakeModel EPSON ET-7750 Series, driverless, 2.0.0
DeviceURI dnssd://EPSON%20ET-7750%20Series._ipp._tcp.local/?uuid=cfe92100-67c4-11d4-a45f-f8d027d2f47f
State Idle
StateTime 1728711955
ConfigTime 1728317032
Type 45084
Accepting Yes
Shared Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
Attribute marker-colors \#000000,#00FFFF,#FF00FF,#FFFF00,#000000
Attribute marker-levels 62,52,57,59,58
Attribute marker-low-levels 15,15,15,15,15
Attribute marker-high-levels 100,100,100,100,100
Attribute marker-names Photo Black ink,Cyan ink,Magenta ink,Yellow ink,Black ink
Attribute marker-types ink,ink,ink,ink,ink
Attribute marker-change-time 1728711813
</Printer>
<Printer EPSON_ET-7750_Series_über_Internet>
PrinterId 31
UUID urn:uuid:0a3a6ee7-dea3-3384-5d5e-8ebadebf7b9b
AuthInfoRequired none
Info EPSON ET-7750 Series über Internet
Location Hinteres Zimmer
MakeModel EPSON ET-7750 Series , Epson Inkjet Printer Driver (ESC/P-R) for Linux
DeviceURI ipps://EPSON%20ET-7750%20Series._ipps._tcp.local/
State Idle
StateTime 1728324991
ConfigTime 1728324820
Type 12316
Accepting Yes
Shared No
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
OpPolicy default
ErrorPolicy stop-printer
Attribute marker-colors \#000000,#00FFFF,#FF00FF,#FFFF00,#000000
Attribute marker-levels 62,52,57,59,58
Attribute marker-low-levels 15,15,15,15,15
Attribute marker-high-levels 100,100,100,100,100
Attribute marker-names Photo Black ink,Cyan ink,Magenta ink,Yellow ink,Black ink
Attribute marker-types ink,ink,ink,ink,ink
Attribute marker-change-time 1728324964
</Printer>


lpinfo -l -v:

Gerät: URI = http
       Klasse = network
       Info = Internet Printing Protocol (http)
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = beh
       Klasse = network
       Info = Backend Error Handler
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = ipp
       Klasse = network
       Info = Internet Printing Protocol (ipp)
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = cups-pdf:/
       Klasse = file
       Info = CUPS-PDF
       Hersteller-und-Modell = Virtual PDF Printer
       Geräte-ID = MFG:Generic;MDL:CUPS-PDF Printer;DES:Generic CUPS-PDF Printer;CLS:PRINTER;CMD:POSTSCRIPT;
       Standort = 
Gerät: URI = ipps
       Klasse = network
       Info = Internet Printing Protocol (ipps)
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = https
       Klasse = network
       Info = Internet Printing Protocol (https)
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = lpd
       Klasse = network
       Info = LPD/LPR-Host oder -Drucker
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = boomaga:/
       Klasse = file
       Info = Boomaga
       Hersteller-und-Modell = Boomaga printer
       Geräte-ID = MFG:Generic;CMD:PJL,PDF;MDL:Boomaga printer;CLS:PRINTER;DES:Virtual boomaga printer;DRV:DPDF,R1,M0;
       Standort = 
Gerät: URI = socket
       Klasse = network
       Info = AppSocket/HP JetDirect
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = smb
       Klasse = network
       Info = Windows Printer via SAMBA
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = bjnp
       Klasse = network
       Info = Canon network printer
       Hersteller-und-Modell = Unknown
       Geräte-ID = 
       Standort = 
Gerät: URI = dnssd://EPSON%20ET-7750%20Series._ipp._tcp.local/?uuid=cfe92100-67c4-11d4-a45f-f8d027d2f47f
       Klasse = network
       Info = EPSON ET-7750 Series
       Hersteller-und-Modell = EPSON ET-7750 Series
       Geräte-ID = MFG:EPSON;MDL:ET-7750 Series;CMD:PWG,URF,JPEG;
       Standort = 
Gerät: URI = ipps://EPSON%20ET-7750%20Series._ipps._tcp.local/
       Klasse = network
       Info = EPSON ET-7750 Series (driverless)
       Hersteller-und-Modell = EPSON ET-7750 Series
       Geräte-ID = MFG:EPSON;MDL:ET-7750 Series;CMD:PWGRaster,AppleRaster,PWG,URF,JPEG;
       Standort =
3

Der Drucker wird über avahi-daemon (dnssd) automatisch gefunden sobald er eingeschaltet wird. Man kann avahi auch ausschalten wenn man das nicht benötigt. Etwas ähnliches macht auch der cups-browsed daemon, den sollte man zur Zeit klar ausschalten weil es ein ungelöstes Sicherheitsproblem gibt. Wenn man Warteschlangen manuell anlegt, braucht man das ganze automatische einrichten eigentlich nicht.

4

Wenn ich mal einen Drucker anlege dann über die Cupsseite oder über die Druckereinstellungen.