Good Morning;
I am an Endeavoros user and until now I had used the previous version without problem following the instructions for an installation with btrfs and timeshift without encryption at https://discovery.endeavouros.com/encrypted-installation/btrfsonluks-quick-copy-paste- version / 2021/03 /
Now I have done a fresh install using the latest version endeavouros-2021.08.27-x86_64.iso. This time I have done the installation from squid using encrypted btrfs.
Then I have used the instructions from https://discovery.endeavouros.com/encrypted-installation/btrfsonluks-quick-copy-paste-version/2021/03/ to install pacman --noconfirm -Syy &&
yay --noconfirm -S timeshift timeshift-autosnap grub-btrfs. Then I used the instructions to configure the programs.
The problem is that when I do an update or install a new program, timeshift-autosnap returns an error because it cannot delete the old snapshots. This did not happen to me before with the previous installation
This is my log
#################### inxi -Fxxc0z ########################
System: Kernel: 5.10.63-1-lts x86_64 bits: 64 compiler: gcc v: 11.1.0
Desktop: KDE Plasma 5.22.5 tk: Qt 5.15.2 wm: kwin_x11 dm: SDDM Distro: EndeavourOS
base: Arch Linux
Machine: Type: Laptop System: HP product: HP Laptop 15s-eq0xxx v: N/A serial: Chassis:
type: 10 serial:
Mobo: HP model: 86FD v: 99.36 serial: UEFI: AMI v: F.17 date: 04/13/2020
Battery: ID-1: BAT0 charge: 26.1 Wh (65.4%) condition: 39.9/39.9 Wh (100.0%) volts: 12.4
min: 11.3 model: Hewlett-Packard Primary serial: N/A status: Charging
CPU: Info: Quad Core model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx bits: 64
type: MT MCP arch: Zen rev: 1 cache: L2: 2 MiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 33534
Speed: 2431 MHz min/max: 1400/2100 MHz boost: enabled Core speeds (MHz): 1: 2431
2: 2429 3: 1461 4: 1457 5: 3692 6: 3692 7: 1464 8: 1458
Graphics: Device-1: AMD Picasso vendor: Hewlett-Packard driver: amdgpu v: kernel bus-ID: 04:00.0
chip-ID: 1002:15d8
Device-2: Luxvisions Innotech Limited HP TrueVision HD Camera type: USB
driver: uvcvideo bus-ID: 3-1.2:3 chip-ID: 30c9:0013
Display: x11 server: X.org 1.20.13 compositor: kwin_x11 driver: loaded: amdgpu,ati
unloaded: fbdev,modesetting,vesa resolution: <missing: xdpyinfo>
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio: Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 04:00.1 chip-ID: 1002:15de
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor vendor: Hewlett-Packard
driver: N/A bus-ID: 04:00.5 chip-ID: 1022:15e2
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus-ID: 04:00.6 chip-ID: 1022:15e3
Sound Server-1: ALSA v: k5.10.63-1-lts running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: yes
Sound Server-4: PipeWire v: 0.3.35 running: no
Network: Device-1: Realtek RTL8822CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8822ce v: N/A port: f000 bus-ID: 02:00.0
chip-ID: 10ec:c822
IF: wlan0 state: up mac:
Bluetooth: Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8 bus-ID: 1-4:3
chip-ID: 0bda:b00c
Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: disabled rfk-block:
hardware: no software: no address: see --recommends
Drives: Local Storage: total: 476.94 GiB used: 319.43 GiB (67.0%)
ID-1: /dev/nvme0n1 vendor: Samsung model: MZVLB512HBJQ-000H1 size: 476.94 GiB
speed: 31.6 Gb/s lanes: 4 serial: temp: 33.9 C
Partition: ID-1: / size: 476.43 GiB used: 319.43 GiB (67.0%) fs: btrfs dev: /dev/dm-0
mapped: luks-eea88dce-052a-4f4c-a329-6dcdfa0fcedf
ID-2: /boot/efi size: 511 MiB used: 720 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1
ID-3: /home size: 476.43 GiB used: 319.43 GiB (67.0%) fs: btrfs dev: /dev/dm-0
mapped: luks-eea88dce-052a-4f4c-a329-6dcdfa0fcedf
ID-4: /var/log size: 476.43 GiB used: 319.43 GiB (67.0%) fs: btrfs dev: /dev/dm-0
mapped: luks-eea88dce-052a-4f4c-a329-6dcdfa0fcedf
Swap: ID-1: swap-1 type: zram size: 8 GiB used: 0 KiB (0.0%) priority: 100 dev: /dev/zram0
Sensors: System Temperatures: cpu: 56.4 C mobo: 51.0 C gpu: amdgpu temp: 56.0 C
Fan Speeds (RPM): N/A
Info: Processes: 261 Uptime: 39m Memory: 9.7 GiB used: 2.1 GiB (21.6%) Init: systemd v: 249
Compilers: gcc: 11.1.0 clang: 12.0.1 Packages: pacman: 1315 Client: shell wrapper
v: 5.1.8-release inxi: 3.3.05
[2021-09-12T11:29:08+0200] [PACMAN] Running ‘pacman -Syu’
[2021-09-12T11:29:08+0200] [PACMAN] synchronizing package lists
[2021-09-12T11:29:10+0200] [PACMAN] starting full system upgrade
[2021-09-12T11:29:31+0200] [ALPM] running ‘00-timeshift-autosnap.hook’…
[2021-09-12T11:29:31+0200] [ALPM-SCRIPTLET] Using system disk as snapshot device for creating snapshots in BTRFS mode
[2021-09-12T11:29:31+0200] [ALPM-SCRIPTLET]
[2021-09-12T11:29:31+0200] [ALPM-SCRIPTLET] /dev/dm-0 is mounted at: /run/timeshift/backup, options: rw,relatime,compress=zstd:3,ssd,space_cache,autodefrag,subvolid=5,subvol=/
[2021-09-12T11:29:31+0200] [ALPM-SCRIPTLET]
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] Creating new backup…(BTRFS)
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] Saving to device: /dev/dm-0, mounted at path: /run/timeshift/backup
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] Created directory: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-09-12_11-29-32
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] Created subvolume snapshot: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-09-12_11-29-32/@
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] Created control file: /run/timeshift/backup/timeshift-btrfs/snapshots/2021-09-12_11-29-32/info.json
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] BTRFS Snapshot saved successfully (0s)
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] Tagged snapshot ‘2021-09-12_11-29-32’: ondemand
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] ------------------------------------------------------------------------------
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET] Removing snapshots (incomplete):
[2021-09-12T11:29:32+0200] [ALPM-SCRIPTLET]