hello iv been using my rpi4 as my main computer for some time now since iv been having some issues with my laptop. i left raspbian to manjaro and now iv been using endeavour os. iv been running some fairly intense programs including cad,browsers and 3d slicers so iv been overclocked to 2.1ghz cpu and 750mhz gpu, also over voltage 6(i think its 6 millivolts​
any ideas, i apologize for lack of or unorganized info.
hello it is possible to return
inxi -Fza
ok ill get that and put it here when i have time this evening
Pudge
May 21, 2023, 1:20am
4
How much RAM does your device have? 4 GB or 8GB?
I assume cura slicer was still running when chromium was launched?
Pudge
its 4gb. but they’ve ran together fine before
Pudge
May 21, 2023, 2:30am
6
Just for troubleshooting purposes, does running cura slicer then launching Firefox crash the system?
Pudge
here is the output from inxi -Fza
System:
Kernel: 6.1.28-3-rpi-ARCH arch: aarch64 bits: 64 compiler: N/A
parameters: coherent_pool=1M 8250.nr_uarts=0
snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1
snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0
video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:67:1F:7B
vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000
root=UUID=effff8d7-8fe2-4f1c-aec4-a034a7a768ff rw rootwait
console=ttyS0,115200 console=tty1 fsck.repair=yes usbhid.mousepoll=8
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: EndeavourOS base: Arch Linux
Machine:
Type: ARM System: Raspberry Pi 4 Model B Rev 1.4 details: BCM2835
rev: c03114 serial: <filter>
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331
serial: <filter> charge: 55% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: ARMv8 v8l variant: cortex-a72 bits: 64 type: MCP arch: v8l
family: 8 model-id: 0 stepping: 3
Topology: cpus: 1x cores: 4 smt: N/A cache: L1: 320 KiB
desc: d-4x32 KiB; i-4x48 KiB L2: 1024 KiB desc: 1x1024 KiB
Speed (MHz): avg: 850 high: 1600 min/max: 600/2000 scaling:
driver: cpufreq-dt governor: schedutil cores: 1: 600 2: 600 3: 600 4: 1600
bogomips: 432
Features: Use -f option to see features
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: __user pointer sanitization
Type: spectre_v2 status: Vulnerable
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: bcm2711-hdmi0 driver: vc4_hdmi v: N/A bus-ID: N/A
chip-ID: brcm:fef00700 class-ID: hdmi
Device-2: bcm2711-hdmi1 driver: vc4_hdmi v: N/A bus-ID: N/A
chip-ID: brcm:fef05700 class-ID: hdmi
Device-3: bcm2711-vc5 driver: vc4_drm v: N/A bus-ID: N/A chip-ID: brcm:gpu
class-ID: gpu
Display: x11 server: X.Org v: 21.1.8 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting alternate: fbdev dri: vc4
gpu: vc4-drm,vc4_crtc,vc4_dpi,vc4_dsi,vc4_firmware_kms,vc4_hdmi,vc4_hvs,vc4_txp,vc4_v3d,vc4_vec
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-1 model: Acer S231HL serial: <filter>
built: 2011 res: 1920x1080 hz: 60 dpi: 96 gamma: 1.2
size: 510x287mm (20.08x11.3") diag: 585mm (23") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: OpenGL v: 2.1 Mesa 23.0.3 renderer: V3D 4.2 direct-render: Yes
Audio:
Device-1: bcm2711-hdmi0 driver: vc4_hdmi bus-ID: N/A chip-ID: brcm:fef00700
class-ID: hdmi
Device-2: bcm2711-hdmi1 driver: vc4_hdmi bus-ID: N/A
chip-ID: brcm:fef05700 class-ID: hdmi
API: ALSA v: k6.1.28-3-rpi-ARCH status: kernel-api
tools: alsactl,alsamixer,amixer
Server-1: PipeWire v: 0.3.70 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
chip-ID: brcm:fe300000 class-ID: mmcnr
IF: wlan0 state: up mac: <filter>
Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
chip-ID: brcm:fd580000 class-ID: ethernet
IF: end0 state: down mac: <filter>
Bluetooth:
Device-1: pl011 driver: uart_pl011 bus-ID: N/A chip-ID: arm:fe201000
class-ID: serial
Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: disabled
rfk-block: hardware: no software: no address: see --recommends
Device-2: pl011 driver: N/A bus-ID: N/A chip-ID: arm:serial0
class-ID: serial
Report: This feature requires one of these tools: hciconfig/bt-adapter
Drives:
Local Storage: total: 57.3 GiB used: 8.02 GiB (14.0%)
ID-1: /dev/sda maj-min: 8:0 vendor: SanDisk model: Cruzer Glide
size: 57.3 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 2.0
spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter> fw-rev: 1.00
scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 57.03 GiB size: 56.04 GiB (98.26%) used: 7.97 GiB (14.2%)
fs: ext4 dev: /dev/sda2 maj-min: 8:2
ID-2: /boot raw-size: 256 MiB size: 255.7 MiB (99.89%)
used: 54.7 MiB (21.4%) fs: vfat dev: /dev/sda1 maj-min: 8:1
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 37.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 198 Uptime: 3m Memory: available: 3.77 GiB
used: 934.8 MiB (24.2%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.1.0 Packages: pm: pacman pkgs: 911
libs: 225 tools: yay Shell: Zsh v: 5.9 running-in: xfce4-terminal
inxi: 3.3.27
Pleas use </> to format long outputs for better readability.
).