Hallo, mein Druckerproblem habe ich zwar beheben können aber durch HPLIP und hp-check -t bin ich auf einige fehlende Dependencies gestoßen. Eine davon ist dbus. Ergo bin ich nachdem ichs mit pacman nicht gefunden hab in AUR suchen gegangen und hab mir das dbus-x11-git Paket ausgeguckt und es mit yay installiert bzw. installieren wollen.
Leider ist da was schief gelaufen und folgende Fehlermeldungen kamen am Schluß raus:
Pakete werden geladen …
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
:: dbus-x11-git-1.15.12+6+g08d64b16-1 and dbus-1.14.10-2 are in conflict. Remove dbus? [j/N] j
Paket (2) Alte Version Neue Version Netto-Veränderung
Gesamtgröße der installierten Pakete: 0,84 MiB
Größendifferenz der Aktualisierung: -0,05 MiB
:: Installation fortsetzen? [J/n] j
(1/1) Schlüssel im Schlüsselbund werden geprüft [--------------------------------------------------] 100%
(1/1) Paket-Integrität wird überprüft [--------------------------------------------------] 100%
(1/1) Paket-Dateien werden geladen [--------------------------------------------------] 100%
(1/1) Auf Dateikonflikte wird geprüft [--------------------------------------------------] 100%
Fehler: Der Vorgang konnte nicht durchgeführt werden (In Konflikt stehende Dateien)
dbus-x11-git: /usr/lib/systemd/system/dbus.service existiert im Dateisystem (gehört zu dbus-broker-units)
dbus-x11-git: /usr/lib/systemd/user/dbus.service existiert im Dateisystem (gehört zu dbus-broker-units)
Fehler sind aufgetreten, keine Pakete wurden aktualisiert.
→ Fehler bei der Installation: [/home/petermb/.cache/yay/dbus-x11-git/dbus-x11-git-1.15.12+6+g08d64b16-1-x86_64.pkg.tar.zst] - exit status 1
[petermb@EndeavourOSNeo-Machine yay]$ sudo pacman dbus-x11-git
[petermb@EndeavourOSNeo-Machine ~]$ hp-check -t
/usr/bin/hp-check:630: SyntaxWarning: invalid escape sequence '\s'
lsusb_pat = re.compile("""^Bus\s([0-9a-fA-F]{3,3})\sDevice\s([0-9a-fA-F]{3,3}):\sID\s([0-9a-fA-F]{4,4}):([0-9a-fA-F]{4,4})(.*)""", re.IGNORECASE)
/usr/bin/hp-check:685: SyntaxWarning: "is not" with 'str' literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/petermb/hp-check.log
HP Linux Imaging and Printing System (ver. 3.24.4)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the
proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP
supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time
dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 0-rolling version is not supported. Using 0-0 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 6.11.6-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 01 Nov 2024 03:30:41 +0000 GNU/Linux
Host: EndeavourOSNeo-Machine
Proc: 6.11.6-arch1-1 #1 SMP PREEMPT_DYNAMIC Fri, 01 Nov 2024 03:30:41 +0000 GNU/Linux
Distribution: 0 rolling
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.24.4
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 0 distro rolling version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.24.4
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.24.4
html=/usr/share/doc/hplip-3.24.4
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.24.4
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[commands]
scan =
[fax]
email_address =
voice_phone =
[installation]
date_time = 11/05/24 20:08:42
version = 3.24.4
[last_used]
device_uri = "hp:/net/DeskJet_2700_series?hostname=HP5C60BA96DCC4.local"
printer_name =
working_dir = .
[polling]
device_list =
enable = false
interval = 5
[refresh]
enable = false
rate = 30
type = 1
[settings]
systray_messages = 0
systray_visible = 0
[upgrade]
last_upgraded_time = 1730495643
notify_upgrade = true
pending_upgrade_time = 0
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.4.11 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 10.04.0 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.3.1 OK -
error: dbus DBus - Message bus system REQUIRED - 1.14.10 MISSING 'DBUS may not be installed or not running'
policykit PolicyKit - Administrative policy framework OPTIONAL - 125 OK -
network network -wget OPTIONAL - 1.24.5 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.4.11 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.4.11 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.40' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - 1.3.1 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.3.1 OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9.4 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 3.4.0 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.12.7 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed'
error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.3.2 OK -
python3-xml Python XML libraries REQUIRED - 2.6.3 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.12.7 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 11.0.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 4.2.2 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.5.3 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 14.2.1 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.4.1 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.24.4 OK -
hpmudext IO-Extension REQUIRED - 3.24.4 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.24.4 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.24.4 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP-DeskJet-2700-series
----------------------
Type: Printer
Device URI: hp:/net/DeskJet_2700_series?hostname=HP5C60BA96DCC4.local
PPD: /etc/cups/ppd/HP-DeskJet-2700-series.ppd
warning: Failed to read /etc/cups/ppd/HP-DeskJet-2700-series.ppd ppd file
PPD Description:
Printer status: Drucker HP-DeskJet-2700-series ist im Leerlauf. Aktiviert seit Di 05 Nov 2024 18:15:25 CET
Communication status: Good
HP_DeskJet_2700_series_96DCC4
-----------------------------
Type: Unknown
Device URI: implicitclass://HP_DeskJet_2700_series_96DCC4/
PPD: /etc/cups/ppd/HP_DeskJet_2700_series_96DCC4.ppd
warning: Failed to read /etc/cups/ppd/HP_DeskJet_2700_series_96DCC4.ppd ppd file
PPD Description:
Printer status: Drucker HP_DeskJet_2700_series_96DCC4 ist im Leerlauf. Aktiviert seit Di 05 Nov 2024 18:18:56 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
None
Missing Optional Dependencies
-----------------------------
None
Total Errors: 4
Total Warnings: 1
Done.
[petermb@EndeavourOSNeo-Machine ~]$
Also nachdem ich am DBUS rumgepfuscht habe fahre ich das System nicht mehr runter. Habe Bammel, dass dann alles im A… ist. Habe mir pacseek besorgt und stehe jetzt vor der Frage, wie ich das PKGBUILD rechts zum Laufen bringe? Please help!!!
So, da bis jetzt leider wohl wegen auf der Arbeit sein oder so keine Antwort kam und ich etwas nachgelesen habe, bin ich so verfahren:
[petermb@EndeavourOSNeo-Machine ~]$ sudo pacman -S dbus
Warnung: dbus-1.14.10-2 ist aktuell – Reinstalliere
Abhängigkeiten werden aufgelöst …
Nach in Konflikt stehenden Paketen wird gesucht …
Paket (1) Alte Version Neue Version Netto-Veränderung Größe des Downloads
core/dbus 1.14.10-2 1.14.10-2 0,00 MiB 0,30 MiB
Gesamtgröße des Downloads: 0,30 MiB
Gesamtgröße der installierten Pakete: 0,89 MiB
Größendifferenz der Aktualisierung: 0,00 MiB
:: Installation fortsetzen? [J/n] j
:: Pakete werden empfangen …
dbus-1.14.10-2-x86_64 304,9 KiB 1173 KiB/s 00:00 [------------------------------------------------] 100%
(1/1) Schlüssel im Schlüsselbund werden geprüft [------------------------------------------------] 100%
(1/1) Paket-Integrität wird überprüft [------------------------------------------------] 100%
(1/1) Paket-Dateien werden geladen [------------------------------------------------] 100%
(1/1) Auf Dateikonflikte wird geprüft [------------------------------------------------] 100%
:: Paketänderungen werden verarbeitet …
(1/1) Reinstalliert wird dbus [------------------------------------------------] 100%
:: Post-transaction-Hooks werden gestartet …
(1/6) Creating system user accounts…
(2/6) Reloading system manager configuration…
(3/6) Reloading user manager configuration…
(4/6) Creating temporary files…
(5/6) Arming ConditionNeedsUpdate…
(6/6) Checking which packages need to be rebuilt
[petermb@EndeavourOSNeo-Machine ~]$
Damit sollte DBUS wiederhergestellt sein und keine Probleme mehr auftreten, oder?
