Hello, I updated a few days ago and after the restart my system is broken.
No wifi card neither video card (Intel integrated), the only available resolution is 1280x1024, impossible to set the right one (1920 x 1080). The cursor of the mouse is kind of blocked vedy hard to move it.
I’m on KDE Plasma/Wayland. I have a like USB, could be useul…
Anyone experiencing something like that?
Nope. What does your hardware show? post the link.
inxi -Faz | eos-sendlog
Edit
I’m sorry, I have no line
If you have no internet connection (as your post suggests, since you say your wifi is down after the updated) the eos-sendlog command isn’t going to work.
Try inxi -Faz alone and show the output.
$ inxi -Faz
System:
Kernel: 6.6.48-1-lts arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-linux-lts
root=UUID=e6b33d73-4df4-48f4-98d0-e5a2421a6d62 rw nowatchdog
nvme_load=YES loglevel=3
Desktop: KDE Plasma v: 6.1.4 tk: Qt v: N/A info: frameworks v: 6.5.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: EndeavourOS base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: P8H67-M LE v: Rev X.0x
serial: <superuser required> uuid: <superuser required>
BIOS: American Megatrends v: 0603 date: 02/11/2011
CPU:
Info: model: Intel Core i5-2400 bits: 64 type: MCP arch: Sandy Bridge
gen: core 2 level: v2 built: 2010-12 process: Intel 32nm family: 6
model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 6 MiB
desc: 1x6 MiB
Speed (MHz): avg: 3270 high: 3283 min/max: 1600/3400 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 3266 2: 3283 3: 3258
4: 3275 bogomips: 24755
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX unsupported
Type: l1tf mitigation: PTE Inversion
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: reg_file_data_sampling status: Not affected
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines; IBPB: conditional; IBRS_FW;
STIBP: disabled; RSB filling; PBRSB-eIBRS: Not affected; BHI: Not
affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: ASUSTeK driver: N/A alternate: i915 arch: Gen-6 code: Sandybridge
process: Intel 32nm built: 2011 bus-ID: 00:02.0 chip-ID: 8086:0102
class-ID: 0300
Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.2
compositor: kwin_wayland driver: X: loaded: modesetting
alternate: fbdev,intel,vesa gpu: N/A display-ID: 0
Monitor-1: Unknown-1 res: 1280x1024 size: N/A modes: N/A
API: EGL v: 1.5 platforms: device: 0 drv: swrast surfaceless: drv: swrast
wayland: drv: swrast x11: drv: swrast inactive: gbm
API: OpenGL v: 4.5 vendor: mesa v: 24.2.1-arch1.1 note: incomplete (EGL
sourced) renderer: llvmpipe (LLVM 18.1.8 256 bits)
API: Vulkan Message: No Vulkan data available.
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: ASUSTeK driver: N/A alternate: snd_hda_intel bus-ID: 00:1b.0
chip-ID: 8086:1c20 class-ID: 0403
Server-1: PipeWire v: 1.2.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: N/A modules: iwlwifi pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:2723 class-ID: 0280
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK M4A785/P7P55 driver: N/A modules: r8169 pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0 chip-ID: 10ec:8168
class-ID: 0200
Info: services: NetworkManager,systemd-timesyncd
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: N/A type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.3:3 chip-ID: 8087:0029
class-ID: e001
Drives:
Local Storage: total: 2.05 TiB used: 1.65 TiB (80.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 250GB
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: <unknown>
tech: SSD serial: <filter> fw-rev: 2B6Q scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD20EARS-00MVWB0 size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 3.0 Gb/s tech: N/A serial: <filter> fw-rev: AB51
scheme: MBR
Partition:
ID-1: / raw-size: 113.28 GiB size: 110.94 GiB (97.94%)
used: 87.06 GiB (78.5%) fs: ext4 dev: /dev/sda1 maj-min: 8:1
Swap:
Alert: No swap data was found.
Sensors:
Src: lm-sensors+/sys Message: No sensor data found using /sys/class/hwmon
or lm-sensors.
Info:
Memory: total: 12 GiB note: est. available: 9.63 GiB used: 1.63 GiB (16.9%)
Processes: 190 Power: uptime: 0m states: freeze,standby,mem,disk
suspend: deep avail: s2idle,shallow wakeups: 0 hibernate: platform
avail: shutdown, reboot, suspend, test_resume image: 3.84 GiB
services: org_kde_powerdevil, power-profiles-daemon, upowerd Init: systemd
v: 256 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1282 libs: 309 tools: yay pm: flatpak pkgs: 0
Compilers: gcc: 14.2.1 Shell: Bash v: 5.2.32 running-in: konsole
inxi: 3.3.35
Looks like no modules loaded for WiFi , BlueTooth, or Ethernet. Not sure why?
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: N/A modules: iwlwifi pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:2723 class-ID: 0280
Device-2: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK M4A785/P7P55 driver: N/A modules: r8169 pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0 chip-ID: 10ec:8168
class-ID: 0200
Info: services: NetworkManager,systemd-timesyncd
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: N/A type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.3:3 chip-ID: 8087:0029
class-ID: e001
You could check what rfkill command shows.
Edit: Also this looks like an older motherboard so the ethernet may work on the r8168 package. Unfortunately you need internet to install it. The wifi and bluetooth should work on iwlwfi module.
It tells “impossible to open /dev/rfkill: no périphérique (french) of this type”
The r8168 package only in the AUR now but most realtek should work on the built in r8169 kernel module. So if it ethernet was working before the updates must have done something.
Can you show the whole output from the command? rfkill
Can you show the output of
pacman -Q xf86-video-intel
Have you blacklisted any wifi driver?
Yes i forgot also about video issue. 
The output is nothing.
I didn’t blacklist any wifi
Does it help if you install xf86-video-intel and reboot?
Also, did you try x11 instead of wayland?
It tells the package “xf86-video-intel was not found”
Edit
This is strange output to me. Did you use just rfkill
@manuel
Since the OP doesn’t have any internet connection on WiFi or Ethernet I wonder if running on the live ISO and arch-chroot and run updates again to see if internet is working on the live ISO? 
Try
sudo pacman -Syu xf86-video-install
and reboot.
Just rfkill it tell me permission non accordée