# Wired network doesn't appear after cold boot. Needs restart to show up

**URL:** <https://forum.endeavouros.com/t/wired-network-doesnt-appear-after-cold-boot-needs-restart-to-show-up/57841>\
**Category:** Newbie\
**Created:** [July 9, 2024, 2:20pm UTC](https://forum.endeavouros.com/t/wired-network-doesnt-appear-after-cold-boot-needs-restart-to-show-up/57841 "2024-07-09T14:20:49Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Bink](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/bink/32/87216_2.png) [@Bink](https://forum.endeavouros.com/u/Bink)\
**Post date:** [July 9, 2024, 11:10pm UTC](https://forum.endeavouros.com/t/wired-network-doesnt-appear-after-cold-boot-needs-restart-to-show-up/57841/2 "2024-07-09T23:10:19Z")

</div>

> [@Rainmaker0102](#):
>
> I’ve been having this issue since I fresh installed EndeavourOS on a new SSD a couple weeks ago.

Just to confirm, were you running Linux of some sort prior to this, and if so, was it an issue then?

> [@Rainmaker0102](#):
>
> Every time I have to restart my computer (explicitly hit the restart button, as shutting down and booting up again doesn’t work) to get the wired connection to show up.

That’s not good 😬  
You risk bigger issues if that’s the current “fix”. I do wonder if this is somehow related. It’d be interesting to know what’s causing the system to fail to shut down. You might have a look in [this topic](https://forum.endeavouros.com/t/system-freezing-during-shutdown/57645) for some pointers on what to look for.

> [@Rainmaker0102](#):
>
> `part-nu: Precision T1650 UEFI: Dell v: A28 date: 06/28/2018`

Already running the latest BIOS update, that’s 👍

> [@Rainmaker0102](#):
>
> ```auto
> Network:
> Device-1: Intel 82579LM Gigabit Network vendor: Dell driver: e1000e
> v: kernel port: f040 bus-ID: 00:19.0 chip-ID: 8086:1502
> IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
> 
> ```

I assume this was generated after achieving an “up” state?

These steps are a bit like prodding your network adaptor with a stick. When it’s down, what happens if you run this to restart the network service:

```auto
systemctl restart systemd-networkd

```

Then perhaps release/renew DHCP lease:

```auto
dhclient -r eno1

```

---

_[View the full topic](https://forum.endeavouros.com/t/wired-network-doesnt-appear-after-cold-boot-needs-restart-to-show-up/57841)._
