Was läuft falsch bei Arch oder EOS?

Hallo zusammen,

wird aus einem Rolling Release eine Nerd-Zumutung - ein Update auf zwei Rechnern:
Update auf beiden Systemen ca. 60 Pakete…:

1. Notebook - Nach Update heute morgen bleibt das Notebook hängen:

amdgpu 0000:03.00.0: amdgpu: Secure display: Generic Failure
amdgpu 0000:03.00.0: amdgpu: SECUREDISPLAY: query securedisplay TA failed. ret 0

dann einige Stopped / Close / Starting Zeilen und zuletzt
Starting Switch Root… (blinkender Cursor)

Zweimal “Return”, und die “Kiste” startet durch zum Login. So what?

2. 1h später - Update des Desktop:

Nur wer starke Neven hat, solllte sich die u.a. Ausgabe anschauen.

Ist aber wichtig, um mein Unverständnis und den Ärger zu verstehen.

Wer glaubt ernsthaft, das dieser Mist hilfreich ist?

Man kann das in ein Logfile schreiben, aber als Default-Output auf den Monitor - wie krank ist das denn?

Es ist auch nicht nicht mal komplett, wahrscheinlich Buffer-Overrun o.ä (1000 Zeilen?):

(Anfang fehlt)...
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/intlmacosx.m4:18: gt_INTL_MACOSX is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:8: warning: The macro 'AC_TRY_LINK' is obsolete. 
configure.ac:8: You should run autoupdate. 
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... 
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... 
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:8: warning: The macro 'AC_TRY_LINK' is obsolete. 
configure.ac:8: You should run autoupdate. 
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... 
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... 
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/iconv.m4:20: AM_ICONV_LINK is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:8: warning: The macro 'AC_TRY_RUN' is obsolete. 
configure.ac:8: You should run autoupdate. 
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from... 
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... 
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/iconv.m4:20: AM_ICONV_LINK is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:51: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body 
./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... 
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from... 
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from... 
configure.ac:51: the top level 
configure.ac:64: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body 
./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... 
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from... 
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from... 
configure.ac:64: the top level 
configure.ac:8: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. 
configure.ac:8: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, 
configure.ac:8: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. 
configure.ac:14: installing './ar-lib' 
configure.ac:8: installing './compile' 
configure.ac:8: installing './config.guess' 
configure.ac:8: installing './config.sub' 
configure.ac:5: installing './install-sh' 
configure.ac:5: installing './missing' 
src/daemon/Makefile.am: installing './depcomp' 
Running intltoolize... 
You should update your 'aclocal.m4' by running aclocal. 
==> Quellen sind fertig. 
==> Erstelle Paket: ddccontrol 1.0.3-3 (Sa 14 Dez 2024 12:44:44 CET) 
==> Prüfe Laufzeit-Abhängigkeiten... 
==> Prüfe Buildtime-Abhängigkeiten... 
==> WARNUNG: Verwende bestehenden $srcdir/ Baum 
==> Beginne build()... 
configure: WARNING: unrecognized options: --disable-gnome-applet 
checking for a BSD-compatible install... /usr/bin/install -c 
checking whether sleep supports fractional seconds... yes 
checking filesystem timestamp resolution... 0.01 
checking whether build environment is sane... yes 
checking for a race-free mkdir -p... /usr/bin/mkdir -p 
checking for gawk... gawk 
checking whether make sets $(MAKE)... yes 
checking whether make supports nested variables... yes 
checking xargs -n works... yes 
checking whether NLS is requested... yes 
checking for intltool-update... /usr/bin/intltool-update 
checking for intltool-merge... /usr/bin/intltool-merge 
checking for intltool-extract... /usr/bin/intltool-extract 
checking for xgettext... /usr/bin/xgettext 
checking for msgmerge... /usr/bin/msgmerge 
checking for msgfmt... /usr/bin/msgfmt 
checking for gmsgfmt... /usr/bin/msgfmt 
checking for perl... /usr/bin/perl 
checking for perl >= 5.8.1... 5.40.0 
checking for XML::Parser... ok 
checking for msgfmt... (cached) /usr/bin/msgfmt 
checking for gmsgfmt... (cached) /usr/bin/msgfmt 
checking for xgettext... (cached) /usr/bin/xgettext 
checking for msgmerge... (cached) /usr/bin/msgmerge 
checking whether make supports the include directive... yes (GNU style) 
checking for gcc... gcc 
checking whether the C compiler works... yes 
checking for C compiler default output file name... a.out 
checking for suffix of executables...  
checking whether we are cross compiling... no 
checking for suffix of object files... o 
checking whether the compiler supports GNU C... yes 
checking whether gcc accepts -g... yes 
checking for gcc option to enable C11 features... none needed 
checking whether gcc understands -c and -o together... yes 
checking dependency style of gcc... gcc3 
checking build system type... x86_64-pc-linux-gnu 
checking host system type... x86_64-pc-linux-gnu 
checking for ld used by GCC... /usr/bin/ld 
checking if the linker (/usr/bin/ld) is GNU ld... yes 
checking for shared library run path origin... done 
checking how to run the C preprocessor... gcc -E 
checking for egrep -e... /usr/bin/grep -E 
checking for CFPreferencesCopyAppValue... no 
checking for CFLocaleCopyCurrent... no 
checking for GNU gettext in libc... yes 
checking whether to use NLS... yes 
checking where the gettext function comes from... libc 
checking for gcc... (cached) gcc 
checking whether the compiler supports GNU C... (cached) yes 
checking whether gcc accepts -g... (cached) yes 
checking for gcc option to enable C11 features... (cached) none needed 
checking whether gcc understands -c and -o together... (cached) yes 
checking dependency style of gcc... (cached) gcc3 
checking for ar... ar 
checking the archiver (ar) interface... ar 
checking how to print strings... printf 
checking for a sed that does not truncate output... /usr/bin/sed 
checking for grep that handles long lines and -e... /usr/bin/grep 
checking for egrep... /usr/bin/grep -E 
checking for fgrep... /usr/bin/grep -F 
checking for ld used by gcc... /usr/bin/ld 
checking if the linker (/usr/bin/ld) is GNU ld... yes 
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B 
checking the name lister (/usr/bin/nm -B) interface... BSD nm 
checking whether ln -s works... yes 
checking the maximum length of command line arguments... 1572864 
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop 
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop 
checking for /usr/bin/ld option to reload object files... -r 
checking for file... file 
checking for objdump... objdump 
checking how to recognize dependent libraries... pass_all 
checking for dlltool... no 
checking how to associate runtime and link libraries... printf %s\n 
checking for ranlib... ranlib 
checking for archiver @FILE support... @ 
checking for strip... strip 
checking command to parse /usr/bin/nm -B output from gcc object... ok 
checking for sysroot... no 
checking for a working dd... /usr/bin/dd 
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1 
checking for mt... no 
checking if : is a manifest tool... no 
checking for stdio.h... yes 
checking for stdlib.h... yes 
checking for string.h... yes 
checking for inttypes.h... yes 
checking for stdint.h... yes 
checking for strings.h... yes 
checking for sys/stat.h... yes 
checking for sys/types.h... yes 
checking for unistd.h... yes 
checking for dlfcn.h... yes 
checking for objdir... .libs 
checking if gcc supports -fno-rtti -fno-exceptions... no 
checking for gcc option to produce PIC... -fPIC -DPIC 
checking if gcc PIC flag -fPIC -DPIC works... yes 
checking if gcc static flag -static works... yes 
checking if gcc supports -c -o file.o... yes 
checking if gcc supports -c -o file.o... (cached) yes 
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes 
checking whether -lc should be explicitly linked in... no 
checking dynamic linker characteristics... GNU/Linux ld.so 
checking how to hardcode library paths into programs... immediate 
checking whether stripping libraries is possible... yes 
checking if libtool supports shared libraries... yes 
checking whether to build shared libraries... yes 
checking whether to build static libraries... yes 
checking for pkg-config... /usr/bin/pkg-config 
checking pkg-config is at least version 0.9.0... yes 
checking for stdio.h... (cached) yes 
checking for unistd.h... (cached) yes 
checking for sys/time.h... yes 
checking for stdlib.h... (cached) yes 
checking for errno.h... yes 
checking for unistd.h... (cached) yes 
checking for string.h... (cached) yes 
checking for sys/types.h... (cached) yes 
checking for sys/stat.h... (cached) yes 
checking for fcntl.h... yes 
checking for sys/ioctl.h... yes 
checking for dirent.h... yes 
checking for linux/types.h... yes 
checking if linux/i2c-dev.h works with non-kernel linux/types.h... no 
checking if ./src/lib/i2c-dev.h works instead... yes 
checking for library containing round... -lm 
checking for libxml-2.0... yes 
checking for pci/pci.h... yes 
checking for pci_alloc in -lpci... yes 
checking for sys/io.h... yes 
checking for ADL/adl_sdk.h... no 
checking for gtk+>=2.4 and gthread>=2.4... yes 
checking for X... libraries , headers  
checking for gethostbyname... yes 
checking for connect... yes 
checking for remove... yes 
checking for shmat... yes 
checking for IceConnectionNumber in -lICE... yes 
checking for gio-unix-2.0 >= 2.30.0... yes 
checking that generated files are newer than configure... done 
configure: creating ./config.status 
config.status: creating po/Makefile.in 
config.status: creating Makefile 
config.status: creating src/Makefile 
config.status: creating src/lib/Makefile 
config.status: creating src/lib/ddccontrol.pc 
config.status: creating src/daemon/Makefile 
config.status: creating src/daemon/data/Makefile 
config.status: creating src/ddccontrol/Makefile 
config.status: creating src/gddccontrol/Makefile 
config.status: creating src/ddcpci/Makefile 
config.status: creating doc/Makefile 
config.status: creating doc/main.xml 
config.status: creating man/Makefile 
config.status: creating src/config.h 
config.status: executing po-directories commands 
config.status: creating po/POTFILES 
config.status: creating po/Makefile 
config.status: executing depfiles commands 
config.status: executing libtool commands 
config.status: executing po/stamp-it commands 
configure: WARNING: unrecognized options: --disable-gnome-applet 
Making all in src 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src“ wird betreten 
make  all-recursive 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src“ wird betreten 
Making all in lib 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib“ wird betreten 
depbase=`echo ddcci.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ 
/bin/sh ../../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -DDDCPCIDIR=\"/usr/libexec/ddccont
rol\" -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/includ
e/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clas
h-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT d
dcci.lo -MD -MP -MF $depbase.Tpo -c -o ddcci.lo ddcci.c &&\ 
mv -f $depbase.Tpo $depbase.Plo 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT ddcci.lo -MD -MP -MF .deps/ddcci.Tpo -c ddcci.c  -fPIC -DPIC -
o .libs/ddcci.o 
ddcci.c: In function 'ddcpci_init': 
ddcci.c:160:17: warning: ignoring return value of 'system' declared with attribute 'warn_unused_result' [-Wunused-result] 
 160 |                 system(buffer); 
     |                 ^~~~~~~~~~~~~~ 
ddcci.c: In function 'ddcci_open_with_addr.constprop': 
ddcci.c:1019:17: warning: '__builtin___strncat_chk' output may be truncated copying 3 bytes from a string of length 7 [-Wstringop-truncation] 
1019 |                 strncat(buffer, mon->pnpid, 3); /* copy manufacturer id */ 
     |                 ^ 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT ddcci.lo -MD -MP -MF .deps/ddcci.Tpo -c ddcci.c -o ddcci.o >/d
ev/null 2>&1 
depbase=`echo monitor_db.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ 
/bin/sh ../../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -DDDCPCIDIR=\"/usr/libexec/ddccont
rol\" -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/includ
e/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clas
h-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT m
onitor_db.lo -MD -MP -MF $depbase.Tpo -c -o monitor_db.lo monitor_db.c &&\ 
mv -f $depbase.Tpo $depbase.Plo 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT monitor_db.lo -MD -MP -MF .deps/monitor_db.Tpo -c monitor_db.c
 -fPIC -DPIC -o .libs/monitor_db.o 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT monitor_db.lo -MD -MP -MF .deps/monitor_db.Tpo -c monitor_db.c
-o monitor_db.o >/dev/null 2>&1 
depbase=`echo conf.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ 
/bin/sh ../../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -DDDCPCIDIR=\"/usr/libexec/ddccont
rol\" -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/includ
e/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clas
h-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT c
onf.lo -MD -MP -MF $depbase.Tpo -c -o conf.lo conf.c &&\ 
mv -f $depbase.Tpo $depbase.Plo 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT conf.lo -MD -MP -MF .deps/conf.Tpo -c conf.c  -fPIC -DPIC -o .
libs/conf.o 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT conf.lo -MD -MP -MF .deps/conf.Tpo -c conf.c -o conf.o >/dev/n
ull 2>&1 
depbase=`echo amd_adl.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ 
/bin/sh ../../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -DDDCPCIDIR=\"/usr/libexec/ddccont
rol\" -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/includ
e/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clas
h-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT a
md_adl.lo -MD -MP -MF $depbase.Tpo -c -o amd_adl.lo amd_adl.c &&\ 
mv -f $depbase.Tpo $depbase.Plo 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT amd_adl.lo -MD -MP -MF .deps/amd_adl.Tpo -c amd_adl.c  -fPIC -
DPIC -o .libs/amd_adl.o 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src -DLOCALEDIR=\"/usr/share/locale\" -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/
usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-
64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-poi
nter -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -MT amd_adl.lo -MD -MP -MF .deps/amd_adl.Tpo -c amd_adl.c -o amd_a
dl.o >/dev/null 2>&1 
/bin/sh ../../libtool  --tag=CC   --mode=link gcc -DDDCPCIDIR=\"/usr/libexec/ddccontrol\" -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I
/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions  
      -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-p
ointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\""  -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now          -Wl,-z,pack-
relative-relocs -o libddccontrol.la -rpath /usr/lib ddcci.lo monitor_db.lo conf.lo amd_adl.lo -lxml2 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  
libtool: link: gcc -shared  -fPIC -DPIC  .libs/ddcci.o .libs/monitor_db.o .libs/conf.o .libs/amd_adl.o   -lxml2 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  -march=x8
6-64 -mtune=generic -O2 -Werror=format-security -mno-omit-leaf-frame-pointer -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,pack-
relative-relocs   -pthread -Wl,-soname -Wl,libddccontrol.so.0 -o .libs/libddccontrol.so.0.0.0 
libtool: link: (cd ".libs" && rm -f "libddccontrol.so.0" && ln -s "libddccontrol.so.0.0.0" "libddccontrol.so.0") 
libtool: link: (cd ".libs" && rm -f "libddccontrol.so" && ln -s "libddccontrol.so.0.0.0" "libddccontrol.so") 
libtool: link: ar cr .libs/libddccontrol.a  ddcci.o monitor_db.o conf.o amd_adl.o 
libtool: link: ranlib .libs/libddccontrol.a 
libtool: link: ( cd ".libs" && rm -f "libddccontrol.la" && ln -s "../libddccontrol.la" "libddccontrol.la" ) 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib“ wird verlassen 
Making all in daemon 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird betreten 
gdbus-codegen --interface-prefix ddccontrol --generate-c-code interface ddccontrol.DDCControl.xml 
make  all-recursive 
make[4]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird betreten 
Making all in data 
make[5]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon/data“ wird betreten 
make[5]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon/data“ wird verlassen 
make[5]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird betreten 
depbase=`echo service.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src/lib  -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/inc
lude/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wfor
mat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/shar
e/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT service.o -MD -MP -MF $depbase.Tpo -c -o service.o service.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
service.c: In Funktion »is_i2c_loaded«: 
service.c:325:9: Warnung: Der Rückgabewert von »fgets«, der mit dem Attribut »warn_unused_result« deklariert wurde, wird ignoriert [-Wunused-result] 
 325 |         fgets(result, 128, pf); 
     |         ^~~~~~~~~~~~~~~~~~~~~~ 
depbase=`echo interface.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ 
/bin/sh ../../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src/lib  -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/includ
e/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -
fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit
-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT interface.lo -MD -MP -MF $depbase.Tpo -c -o interface.lo interface.c &&
\ 
mv -f $depbase.Tpo $depbase.Plo 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src/lib -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/i
nclude -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURC
E=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccont
rol-db\" -DBINDIR=\"/usr/bin\" -MT interface.lo -MD -MP -MF .deps/interface.Tpo -c interface.c  -fPIC -DPIC -o .libs/interface.o 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src/lib -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/i
nclude -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURC
E=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccont
rol-db\" -DBINDIR=\"/usr/bin\" -MT interface.lo -MD -MP -MF .deps/interface.Tpo -c interface.c -o interface.o >/dev/null 2>&1 
/bin/sh ../../libtool  --tag=CC   --mode=link gcc -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include
/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat 
-Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/dd
ccontrol-db\"" -DBINDIR="\"/usr/bin\""  -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now          -Wl,-z,pack-relative-relocs -o libdbusinterface.la  
interface.lo  -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  
libtool: link: ar cr .libs/libdbusinterface.a .libs/interface.o  
libtool: link: ranlib .libs/libdbusinterface.a 
libtool: link: ( cd ".libs" && rm -f "libdbusinterface.la" && ln -s "../libdbusinterface.la" "libdbusinterface.la" ) 
/bin/sh ../../libtool  --tag=CC   --mode=link gcc -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include
/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat 
-Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/dd
ccontrol-db\"" -DBINDIR="\"/usr/bin\"" -lxml2  -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now          -Wl,-z,pack-relative-relocs -o ddccontrol_ser
vice service.o libdbusinterface.la ../lib/libddccontrol.la -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  
libtool: link: gcc -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid 
-I/usr/include/sysprof-6 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection
-fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -Wl,-O1 -Wl,--sort-common -Wl,
--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,pack-relative-relocs -o .libs/ddccontrol_service service.o  ./.libs/libdbusinterface.a ../lib/.libs/libddccontro
l.so -lxml2 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm -pthread 
depbase=`echo dbus_client.lo | sed 's|[^/]*$|.deps/&|;s|\.lo$||'`;\ 
/bin/sh ../../libtool  --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src/lib  -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/includ
e/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -
fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit
-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT dbus_client.lo -MD -MP -MF $depbase.Tpo -c -o dbus_client.lo dbus_clien
t.c &&\ 
mv -f $depbase.Tpo $depbase.Plo 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src/lib -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/i
nclude -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURC
E=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccont
rol-db\" -DBINDIR=\"/usr/bin\" -MT dbus_client.lo -MD -MP -MF .deps/dbus_client.Tpo -c dbus_client.c  -fPIC -DPIC -o .libs/dbus_client.o 
dbus_client.c: In function 'ddcci_dbus_rescan_monitors': 
dbus_client.c:175:19: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 
 175 |         supported = g_variant_get_fixed_array(v_supported, &supported_n, sizeof(char)); 
     |                   ^ 
dbus_client.c:176:17: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 
 176 |         digital = g_variant_get_fixed_array(v_digital, &digital_n, sizeof(char)); 
     |                 ^ 
dbus_client.c: In function 'ddcci_dbus_open': 
dbus_client.c:97:17: warning: '__builtin___strncat_chk' output may be truncated copying 3 bytes from a string of length 7 [-Wstringop-truncation] 
  97 |                 strncat(buffer, mon->pnpid, 3); /* copy manufacturer id */ 
     |                 ^ 
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I../../src -I../../src/lib -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/i
nclude -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURC
E=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccont
rol-db\" -DBINDIR=\"/usr/bin\" -MT dbus_client.lo -MD -MP -MF .deps/dbus_client.Tpo -c dbus_client.c -o dbus_client.o >/dev/null 2>&1 
/bin/sh ../../libtool  --tag=CC   --mode=link gcc -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include
/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat 
-Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/dd
ccontrol-db\"" -DBINDIR="\"/usr/bin\"" -lxml2 -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now          -Wl,-z,pack-relative-relocs -o libddccontrol_d
bus_client.la -rpath /usr/lib dbus_client.lo libdbusinterface.la ../lib/libddccontrol.la -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  
libtool: link: gcc -shared  -fPIC -DPIC  .libs/dbus_client.o  -Wl,--whole-archive ./.libs/libdbusinterface.a -Wl,--no-whole-archive  -Wl,-rpath -Wl,/home/michaelp/.cac
he/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib/.libs ../lib/.libs/libddccontrol.so -lxml2 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  -march=x86-64 -mtune=generic -O
2 -Werror=format-security -mno-omit-leaf-frame-pointer -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,pack-relative-relocs   -pth
read -Wl,-soname -Wl,libddccontrol_dbus_client.so.0 -o .libs/libddccontrol_dbus_client.so.0.0.0 
libtool: link: (cd ".libs" && rm -f "libddccontrol_dbus_client.so.0" && ln -s "libddccontrol_dbus_client.so.0.0.0" "libddccontrol_dbus_client.so.0") 
libtool: link: (cd ".libs" && rm -f "libddccontrol_dbus_client.so" && ln -s "libddccontrol_dbus_client.so.0.0.0" "libddccontrol_dbus_client.so") 
libtool: link: (cd .libs/libddccontrol_dbus_client.lax/libdbusinterface.a && ar x "/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon/./.libs/libdbus
interface.a") 
libtool: link: ar cr .libs/libddccontrol_dbus_client.a  dbus_client.o  .libs/libddccontrol_dbus_client.lax/libdbusinterface.a/interface.o  
libtool: link: ranlib .libs/libddccontrol_dbus_client.a 
libtool: link: rm -fr .libs/libddccontrol_dbus_client.lax 
libtool: link: ( cd ".libs" && rm -f "libddccontrol_dbus_client.la" && ln -s "../libddccontrol_dbus_client.la" "libddccontrol_dbus_client.la" ) 
make[5]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird verlassen 
make[4]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird verlassen 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird verlassen 
Making all in ddccontrol 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddccontrol“ wird betreten 
depbase=`echo main.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib -DLOCALEDIR=\"/usr/share/locale\"  -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/g
lib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fex
ceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-le
af-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT main.o -MD -MP -MF $depbase.Tpo -c -o main.o main.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo printing.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib -DLOCALEDIR=\"/usr/share/locale\"  -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/g
lib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fex
ceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-le
af-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT printing.o -MD -MP -MF $depbase.Tpo -c -o printing.o printing.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
/bin/sh ../../libtool  --tag=CC   --mode=link gcc -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include
/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat 
-Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/dd
ccontrol-db\"" -DBINDIR="\"/usr/bin\"" -lxml2  -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now          -Wl,-z,pack-relative-relocs -o ddccontrol mai
n.o printing.o ../lib/libddccontrol.la ../daemon/libddccontrol_dbus_client.la -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  
libtool: link: gcc -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid 
-I/usr/include/sysprof-6 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection
-fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -Wl,-O1 -Wl,--sort-common -Wl,
--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,pack-relative-relocs -o .libs/ddccontrol main.o printing.o  ../lib/.libs/libddccontrol.so ../daemon/.libs/libddc
control_dbus_client.so /home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib/.libs/libddccontrol.so -lxml2 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm -pt
hread 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddccontrol“ wird verlassen 
Making all in gddccontrol 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird betreten 
depbase=`echo main.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src/lib -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/in
clude -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/fribidi -I/usr/include/
cairo -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/inclu
de/sysprof-6 -pthread -DGTK_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGSEAL_ENABLE -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.
0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptio
ns         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-fra
me-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT main.o -MD -MP -MF $depbase.Tpo -c -o main.o main.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
main.c: In Funktion »main«: 
main.c:412:9: Warnung: »g_thread_init« ist veraltet [-Wdeprecated-declarations] 
 412 |         g_thread_init(NULL); 
     |         ^~~~~~~~~~~~~ 
In Datei, eingebunden von /usr/include/glib-2.0/glib.h:115, 
                von /usr/include/glib-2.0/gobject/gbinding.h:30, 
                von /usr/include/glib-2.0/glib-object.h:24, 
                von /usr/include/glib-2.0/gio/gioenums.h:30, 
                von /usr/include/glib-2.0/gio/giotypes.h:30, 
                von /usr/include/glib-2.0/gio/gio.h:28, 
                von /usr/include/gtk-2.0/gdk/gdkapplaunchcontext.h:30, 
                von /usr/include/gtk-2.0/gdk/gdk.h:32, 
                von /usr/include/gtk-2.0/gtk/gtk.h:32, 
                von main.c:22: 
/usr/include/glib-2.0/glib/deprecated/gthread.h:271:10: Anmerkung: hier deklariert 
 271 | void     g_thread_init                   (gpointer vtable); 
     |          ^~~~~~~~~~~~~ 
main.c:413:9: Warnung: »g_mutex_new« ist veraltet [-Wdeprecated-declarations] 
 413 |         combo_change_mutex = g_mutex_new(); 
     |         ^~~~~~~~~~~~~~~~~~ 
/usr/include/glib-2.0/glib/deprecated/gthread.h:283:17: Anmerkung: hier deklariert 
 283 | GMutex *        g_mutex_new             (void); 
     |                 ^~~~~~~~~~~ 
depbase=`echo notebook.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src/lib -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/in
clude -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/fribidi -I/usr/include/
cairo -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/inclu
de/sysprof-6 -pthread -DGTK_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGSEAL_ENABLE -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.
0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptio
ns         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-fra
me-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT notebook.o -MD -MP -MF $depbase.Tpo -c -o notebook.o notebook.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
notebook.c: In Funktion »get_value_and_max«: 
notebook.c:76:11: Warnung: »result« könnte uninitialisiert verwendet werden [-Wmaybe-uninitialized] 
  76 |         if(result < 0) 
     |           ^ 
notebook.c:71:13: Anmerkung: »result« wurde hier deklariert 
  71 |         int result; 
     |             ^~~~~~ 
depbase=`echo gprofile.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src/lib -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/in
clude -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/fribidi -I/usr/include/
cairo -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/inclu
de/sysprof-6 -pthread -DGTK_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGSEAL_ENABLE -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.
0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptio
ns         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-fra
me-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT gprofile.o -MD -MP -MF $depbase.Tpo -c -o gprofile.o gprofile.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo fspatterns.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src/lib -I../../src -DLOCALEDIR=\"/usr/share/locale\"  -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/in
clude -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/fribidi -I/usr/include/
cairo -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/inclu
de/sysprof-6 -pthread -DGTK_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGSEAL_ENABLE -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.
0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptio
ns         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-fra
me-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT fspatterns.o -MD -MP -MF $depbase.Tpo -c -o fspatterns.o fspatterns.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
/bin/sh ../../libtool  --tag=CC   --mode=link gcc -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-
1.0 -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/harfb
uzz -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -pthread -DGTK_DISABLE_SINGLE_INCLUDE
S -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE_DEPRECATED -DGSEAL_ENABLE -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmo
unt -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werro
r=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontr
ol-db\"" -DBINDIR="\"/usr/bin\"" -lxml2 -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lpangoft2-1.0 -lpango-1.0 -lgobject-
2.0 -lharfbuzz -lfontconfig -lfreetype -lgthread-2.0 -pthread -lglib-2.0 -lm -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now          -Wl,-z,pack-rel
ative-relocs -o gddccontrol main.o notebook.o gprofile.o fspatterns.o ../daemon/libddccontrol_dbus_client.la ../lib/libddccontrol.la -lgio-2.0 -lgobject-2.0 -lglib-2.0
-lpci -lm  
libtool: link: gcc -I/usr/include/libxml2 -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/pango-1.0 -I/usr/include/atk-1.0 -I/usr/include/gdk-pixbuf-2
.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/harfbuzz -I/usr/include/freetype2 -I
/usr/include/libpng16 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/sysprof-6 -DGTK_DISABLE_SINGLE_INCLUDES -DGDK_DISABLE_DEPRECATED -DGTK_DISABLE
_DEPRECATED -DGSEAL_ENABLE -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/
sysprof-6 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protectio
n -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl
,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,pack-relative-relocs -o .libs/gddccontrol main.o notebook.o gprofile.o fspatterns.o  -lgtk-x11-2.0 -lgdk-x11-2.0 -lpangocairo-1
.0 -latk-1.0 -lcairo -lgdk_pixbuf-2.0 -lpangoft2-1.0 -lpango-1.0 -lharfbuzz -lfontconfig -lfreetype -lgthread-2.0 ../daemon/.libs/libddccontrol_dbus_client.so /home/mi
chaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib/.libs/libddccontrol.so ../lib/.libs/libddccontrol.so -lxml2 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm -pth
read 
LC_ALL=C /usr/bin/intltool-merge  -d -u -c ../../po/.intltool-merge-cache ../../po gddccontrol.desktop.in gddccontrol.desktop 
Generating and caching the translation database 
NOTICE: ../../po/fr.po is not in UTF-8 but ISO-8859-1, converting... 
NOTICE: ../../po/pl.po is not in UTF-8 but ISO-8859-2, converting... 
Merging translations into gddccontrol.desktop. 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird verlassen 
Making all in ddcpci 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird betreten 
depbase=`echo main.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib  -DLOCALEDIR=\"/usr/share/locale\"   -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/gl
ib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,
-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wal
l  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT main.o -MD -MP -MF $depbase.Tpo -c -o main.o main.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo nvidia.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib  -DLOCALEDIR=\"/usr/share/locale\"   -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/gl
ib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,
-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wal
l  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT nvidia.o -MD -MP -MF $depbase.Tpo -c -o nvidia.o nvidia.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo radeon.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib  -DLOCALEDIR=\"/usr/share/locale\"   -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/gl
ib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,
-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wal
l  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT radeon.o -MD -MP -MF $depbase.Tpo -c -o radeon.o radeon.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo i2c-algo-bit.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib  -DLOCALEDIR=\"/usr/share/locale\"   -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/gl
ib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,
-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wal
l  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT i2c-algo-bit.o -MD -MP -MF $depbase.Tpo -c -o i2c-algo-bit.o i2c-algo-bit.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo via.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib  -DLOCALEDIR=\"/usr/share/locale\"   -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/gl
ib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,
-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wal
l  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT via.o -MD -MP -MF $depbase.Tpo -c -o via.o via.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo intel810.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib  -DLOCALEDIR=\"/usr/share/locale\"   -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/gl
ib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,
-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wal
l  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT intel810.o -MD -MP -MF $depbase.Tpo -c -o intel810.o intel810.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
depbase=`echo sis.o | sed 's|[^/]*$|.deps/&|;s|\.o$||'`;\ 
gcc -DHAVE_CONFIG_H -I. -I../../src  -I../../src -I../../src/lib  -DLOCALEDIR=\"/usr/share/locale\"   -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/gl
ib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,
-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wal
l  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDIR="\"/usr/bin\"" -MT sis.o -MD -MP -MF $depbase.Tpo -c -o sis.o sis.c &&\ 
mv -f $depbase.Tpo $depbase.Po 
/bin/sh ../../libtool  --tag=CC   --mode=link gcc  -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/inclu
de/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions         -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-securit
y         -fstack-clash-protection -fcf-protection         -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall  -DDATADIR="\"/usr/share/ddccontrol-db\"" -DBINDI
R="\"/usr/bin\"" -Wl,-z,now -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now          -Wl,-z,pack-relative-relocs -o ddcpci main.o nvidia.o radeon.o i
2c-algo-bit.o via.o intel810.o sis.o  -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  
libtool: link: gcc -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/sysprof-
6 -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fcf-protection -fno-o
mit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -Wl,-z -Wl,now -Wl,-O1 -Wl,--sort-common -Wl,--as-nee
ded -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,pack-relative-relocs -o ddcpci main.o nvidia.o radeon.o i2c-algo-bit.o via.o intel810.o sis.o  -lgio-2.0 -lgobject-2.0 -
lglib-2.0 -lpci -lm -pthread 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird verlassen 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src“ wird betreten 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src“ wird verlassen 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src“ wird verlassen 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src“ wird verlassen 
Making all in po 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/po“ wird betreten 
grep: Warnung: überzähliges \ vor # 
grep: Warnung: überzähliges \ vor # 
grep: Warnung: überzähliges \ vor # 
file=`echo cs | sed 's,.*/,,'`.gmo \ 
 && rm -f $file && /usr/bin/msgfmt -o $file cs.po 
file=`echo de | sed 's,.*/,,'`.gmo \ 
 && rm -f $file && /usr/bin/msgfmt -o $file de.po 
file=`echo es | sed 's,.*/,,'`.gmo \ 
 && rm -f $file && /usr/bin/msgfmt -o $file es.po 
file=`echo fr | sed 's,.*/,,'`.gmo \ 
 && rm -f $file && /usr/bin/msgfmt -o $file fr.po 
file=`echo pl | sed 's,.*/,,'`.gmo \ 
 && rm -f $file && /usr/bin/msgfmt -o $file pl.po 
file=`echo ru | sed 's,.*/,,'`.gmo \ 
 && rm -f $file && /usr/bin/msgfmt -o $file ru.po 
file=`echo zh_CN | sed 's,.*/,,'`.gmo \ 
 && rm -f $file && /usr/bin/msgfmt -o $file zh_CN.po 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/po“ wird verlassen 
Making all in man 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird betreten 
make[1]: Für das Ziel „all“ ist nichts zu tun. 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird verlassen 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3“ wird betreten 
make[1]: Für das Ziel „all-am“ ist nichts zu tun. 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3“ wird verlassen 
==> Betrete fakeroot Umgebung... 
==> Beginne package_ddccontrol()... 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib“ wird betreten 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib“ wird betreten 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib' 
/bin/sh ../../libtool   --mode=install /usr/bin/install -c   libddccontrol.la '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib' 
libtool: install: /usr/bin/install -c .libs/libddccontrol.so.0.0.0 /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol.so.0.0.0 
libtool: install: (cd /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib && { ln -s -f libddccontrol.so.0.0.0 libddccontrol.so.0 || { rm -f libddccontrol.so.0
&& ln -s libddccontrol.so.0.0.0 libddccontrol.so.0; }; }) 
libtool: install: (cd /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib && { ln -s -f libddccontrol.so.0.0.0 libddccontrol.so || { rm -f libddccontrol.so && 
ln -s libddccontrol.so.0.0.0 libddccontrol.so; }; }) 
libtool: install: /usr/bin/install -c .libs/libddccontrol.lai /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol.la 
libtool: install: /usr/bin/install -c .libs/libddccontrol.a /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol.a 
libtool: install: chmod 644 /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol.a 
libtool: install: ranlib /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol.a 
libtool: warning: remember to run 'libtool --finish /usr/lib' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/modules-load.d/' 
/usr/bin/install -c -m 644 ddccontrol-i2c-dev.conf '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/modules-load.d/' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/pkgconfig' 
/usr/bin/install -c -m 644 ddccontrol.pc '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/pkgconfig' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/include/ddccontrol' 
/usr/bin/install -c -m 644 conf.h monitor_db.h ddcci.h ddcpci-ipc.h '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/include/ddccontrol' 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird betreten 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird betreten 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/libexec/ddccontrol' 
 /bin/sh ../../libtool   --mode=install /usr/bin/install -c ddcpci '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/libexec/ddccontrol' 
libtool: install: /usr/bin/install -c ddcpci /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/libexec/ddccontrol/ddcpci 
make  install-exec-hook 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird betreten 
chmod 4711 /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol//usr/libexec/ddccontrol/ddcpci 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird verlassen 
make[1]: Für das Ziel „install-data-am“ ist nichts zu tun. 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddcpci“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird betreten 
make  install-recursive 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird betreten 
Making install in data 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon/data“ wird betreten 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon/data“ wird betreten 
make[3]: Für das Ziel „install-exec-am“ ist nichts zu tun. 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/dbus-1/system-services' 
/usr/bin/install -c -m 644 ddccontrol.DDCControl.service '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/dbus-1/system-services' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/etc/dbus-1/system.d' 
/usr/bin/install -c -m 644 ddccontrol.DDCControl.conf '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/etc/dbus-1/system.d' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/systemd/system' 
/usr/bin/install -c -m 644 ddccontrol.service '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/systemd/system' 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon/data“ wird verlassen 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon/data“ wird verlassen 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird betreten 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird betreten 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib' 
/bin/sh ../../libtool   --mode=install /usr/bin/install -c   libddccontrol_dbus_client.la '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib' 
libtool: warning: relinking 'libddccontrol_dbus_client.la' 
libtool: install: (cd /home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon; /bin/sh "/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/libtool"
 --tag CC --mode=relink gcc -I/usr/include/libxml2 -I/usr/include/gio-unix-2.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libmount -I/usr/incl
ude/blkid -I/usr/include/sysprof-6 -pthread -march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fsta
ck-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -Wall -DDATADIR=\"/usr/share/ddccontrol-db\" -DBINDIR=\"/usr/bin\" -lxml2 -Wl,
-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-z,pack-relative-relocs -o libddccontrol_dbus_client.la -rpath /usr/lib dbus_client.lo libdbusinterfa
ce.la ../lib/libddccontrol.la -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm -inst-prefix-dir /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol) 
libtool: relink: gcc -shared  -fPIC -DPIC  .libs/dbus_client.o  -Wl,--whole-archive ./.libs/libdbusinterface.a -Wl,--no-whole-archive  -L/home/michaelp/.cache/yay/ddcc
ontrol/pkg/ddccontrol/usr/lib -L/usr/lib -lddccontrol -lxml2 -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lpci -lm  -march=x86-64 -mtune=generic -O2 -Werror=format-security -mn
o-omit-leaf-frame-pointer -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z -Wl,relro -Wl,-z -Wl,now -Wl,-z -Wl,pack-relative-relocs   -pthread -Wl,-soname -Wl,libddcco
ntrol_dbus_client.so.0 -o .libs/libddccontrol_dbus_client.so.0.0.0 
libtool: install: /usr/bin/install -c .libs/libddccontrol_dbus_client.so.0.0.0T /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol_dbus_client.s
o.0.0.0 
libtool: install: (cd /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib && { ln -s -f libddccontrol_dbus_client.so.0.0.0 libddccontrol_dbus_client.so.0 || { 
rm -f libddccontrol_dbus_client.so.0 && ln -s libddccontrol_dbus_client.so.0.0.0 libddccontrol_dbus_client.so.0; }; }) 
libtool: install: (cd /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib && { ln -s -f libddccontrol_dbus_client.so.0.0.0 libddccontrol_dbus_client.so || { rm
-f libddccontrol_dbus_client.so && ln -s libddccontrol_dbus_client.so.0.0.0 libddccontrol_dbus_client.so; }; }) 
libtool: install: /usr/bin/install -c .libs/libddccontrol_dbus_client.lai /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol_dbus_client.la 
libtool: install: /usr/bin/install -c .libs/libddccontrol_dbus_client.a /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol_dbus_client.a 
libtool: install: chmod 644 /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol_dbus_client.a 
libtool: install: ranlib /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/lib/libddccontrol_dbus_client.a 
libtool: warning: remember to run 'libtool --finish /usr/lib' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/libexec/ddccontrol' 
 /bin/sh ../../libtool   --mode=install /usr/bin/install -c ddccontrol_service '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/libexec/ddccontrol' 
libtool: warning: '../lib/libddccontrol.la' has not been installed in '/usr/lib' 
libtool: install: /usr/bin/install -c .libs/ddccontrol_service /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/libexec/ddccontrol/ddccontrol_service 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/dbus-1/interfaces' 
/usr/bin/install -c -m 644 ddccontrol.DDCControl.xml '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/dbus-1/interfaces' 
make[3]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird verlassen 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird verlassen 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/daemon“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddccontrol“ wird betreten 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddccontrol“ wird betreten 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/bin' 
 /bin/sh ../../libtool   --mode=install /usr/bin/install -c ddccontrol '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/bin' 
libtool: warning: '../lib/libddccontrol.la' has not been installed in '/usr/lib' 
libtool: warning: '../daemon/libddccontrol_dbus_client.la' has not been installed in '/usr/lib' 
libtool: warning: '/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib/libddccontrol.la' has not been installed in '/usr/lib' 
libtool: install: /usr/bin/install -c .libs/ddccontrol /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/bin/ddccontrol 
make[1]: Für das Ziel „install-data-am“ ist nichts zu tun. 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddccontrol“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/ddccontrol“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/po“ wird betreten 
grep: Warnung: überzähliges \ vor # 
grep: Warnung: überzähliges \ vor # 
grep: Warnung: überzähliges \ vor # 
grep: Warnung: überzähliges \ vor # 
grep: Warnung: überzähliges \ vor # 
linguas="cs de es fr pl ru zh_CN "; \ 
for lang in $linguas; do \ 
 dir=/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/$lang/LC_MESSAGES; \ 
 /bin/sh /home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/install-sh -d $dir; \ 
 if test -r $lang.gmo; then \ 
   /usr/bin/install -c -m 644 $lang.gmo $dir/ddccontrol.mo; \ 
   echo "installing $lang.gmo as $dir/ddccontrol.mo"; \ 
 else \ 
   /usr/bin/install -c -m 644 ./$lang.gmo $dir/ddccontrol.mo; \ 
   echo "installing ./$lang.gmo as" \ 
        "$dir/ddccontrol.mo"; \ 
 fi; \ 
 if test -r $lang.gmo.m; then \ 
   /usr/bin/install -c -m 644 $lang.gmo.m $dir/ddccontrol.mo.m; \ 
   echo "installing $lang.gmo.m as $dir/ddccontrol.mo.m"; \ 
 else \ 
   if test -r ./$lang.gmo.m ; then \ 
     /usr/bin/install -c -m 644 ./$lang.gmo.m \ 
       $dir/ddccontrol.mo.m; \ 
     echo "installing ./$lang.gmo.m as" \ 
          "$dir/ddccontrol.mo.m"; \ 
   else \ 
     true; \ 
   fi; \ 
 fi; \ 
done 
installing cs.gmo as /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/cs/LC_MESSAGES/ddccontrol.mo 
installing de.gmo as /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/de/LC_MESSAGES/ddccontrol.mo 
installing es.gmo as /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/es/LC_MESSAGES/ddccontrol.mo 
installing fr.gmo as /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/fr/LC_MESSAGES/ddccontrol.mo 
installing pl.gmo as /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/pl/LC_MESSAGES/ddccontrol.mo 
installing ru.gmo as /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/ru/LC_MESSAGES/ddccontrol.mo 
installing zh_CN.gmo as /home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/locale/zh_CN/LC_MESSAGES/ddccontrol.mo 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/po“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird betreten 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird betreten 
make[1]: Für das Ziel „install-exec-am“ ist nichts zu tun. 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/man/man1' 
/usr/bin/install -c -m 644 ddccontrol.1 gddccontrol.1 '/home/michaelp/.cache/yay/ddccontrol/pkg/ddccontrol/usr/share/man/man1' 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird verlassen 
==> Säubere Installation... 
 -> Entferne libtool Dateien... 
 -> Bereinige ungewollte Dateien... 
 -> Entferne statische Bibliotheken... 
 -> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken... 
 -> Komprimiere Man-Pages und Info-Seiten... 
==> Prüfe auf Paketierungsprobleme... 
==> Erstelle Paket "ddccontrol"... 
 -> Erstelle .PKGINFO Datei... 
 -> Erstelle .BUILDINFO Datei... 
 -> Füge install Datei hinzu... 
 -> Erstelle .MTREE-Datei... 
 -> Komprimiere Paket...  
==> Beginne package_gddccontrol()... 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird betreten 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird betreten 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/bin' 
 /bin/sh ../../libtool   --mode=install /usr/bin/install -c gddccontrol '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/bin' 
libtool: warning: '../daemon/libddccontrol_dbus_client.la' has not been installed in '/usr/lib' 
libtool: warning: '/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/lib/libddccontrol.la' has not been installed in '/usr/lib' 
libtool: warning: '../lib/libddccontrol.la' has not been installed in '/usr/lib' 
libtool: install: /usr/bin/install -c .libs/gddccontrol /home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/bin/gddccontrol 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/icons/Bluecurve/48x48/apps' 
/usr/bin/install -c -m 644 gddccontrol.png '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/icons/Bluecurve/48x48/apps' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/applications' 
/usr/bin/install -c -m 644 gddccontrol.desktop '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/applications' 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/icons/hicolor/48x48/apps' 
/usr/bin/install -c -m 644 gddccontrol.png '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/icons/hicolor/48x48/apps' 
make  install-data-hook 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird betreten 
if test -z "/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol"; then \ 
       echo "Updating Gtk icon cache."; \ 
       gtk-update-icon-cache -f -t /usr/share/icons/hicolor; gtk-update-icon-cache -f -t /usr/share/icons/Bluecurve; \ 
else \ 
       echo "*** Icon cache not updated.  After (un)install, run this:"; \ 
       echo "***   gtk-update-icon-cache -f -t /usr/share/icons/hicolor; gtk-update-icon-cache -f -t /usr/share/icons/Bluecurve"; \ 
       fi 
*** Icon cache not updated.  After (un)install, run this: 
***   gtk-update-icon-cache -f -t /usr/share/icons/hicolor; gtk-update-icon-cache -f -t /usr/share/icons/Bluecurve 
make[2]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird verlassen 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/src/gddccontrol“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird betreten 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird betreten 
make[1]: Für das Ziel „install-exec-am“ ist nichts zu tun. 
/usr/bin/mkdir -p '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/man/man1' 
/usr/bin/install -c -m 644 ddccontrol.1 gddccontrol.1 '/home/michaelp/.cache/yay/ddccontrol/pkg/gddccontrol/usr/share/man/man1' 
make[1]: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird verlassen 
make: Verzeichnis „/home/michaelp/.cache/yay/ddccontrol/src/ddccontrol-1.0.3/man“ wird verlassen 
==> Säubere Installation... 
 -> Entferne libtool Dateien... 
 -> Bereinige ungewollte Dateien... 
 -> Entferne statische Bibliotheken... 
 -> Entferne unnötige Symbole aus Binär-Dateien und Bibliotheken... 
 -> Komprimiere Man-Pages und Info-Seiten... 
==> Prüfe auf Paketierungsprobleme... 
==> Erstelle Paket "gddccontrol"... 
 -> Erstelle .PKGINFO Datei... 
 -> Erstelle .BUILDINFO Datei... 
 -> Erstelle .MTREE-Datei... 
 -> Komprimiere Paket...  
==> Verlasse fakeroot Umgebung. 
==> Beendete Erstellung: ddccontrol 1.0.3-3 (Sa 14 Dez 2024 12:44:55 CET) 
==> Räume auf... 
Pakete werden geladen … 
Abhängigkeiten werden aufgelöst … 
Nach in Konflikt stehenden Paketen wird gesucht … 

Paket (1)   Alte Version  Neue Version  Netto-Veränderung 

ddccontrol  1.0.3-1       1.0.3-3                0,00 MiB 

Gesamtgröße der installierten Pakete:  0,39 MiB 
Größendifferenz der Aktualisierung:    0,00 MiB 

:: Installation fortsetzen? [J/n] J 
(1/1) Schlüssel im Schlüsselbund werden geprüft                                                      [-----------------------------------------------------------] 100% 
(1/1) Paket-Integrität wird überprüft                                                                [-----------------------------------------------------------] 100% 
(1/1) Paket-Dateien werden geladen                                                                   [-----------------------------------------------------------] 100% 
(1/1) Auf Dateikonflikte wird geprüft                                                                [-----------------------------------------------------------] 100% 
(1/1) Verfügbarer Festplattenspeicher wird ermittelt                                                 [-----------------------------------------------------------] 100% 
:: Paketänderungen werden verarbeitet … 
(1/1) Aktualisiert wird ddccontrol                                                                   [-----------------------------------------------------------] 100% 
:: Post-transaction-Hooks werden gestartet … 
(1/6) Reloading system manager configuration... 
(2/6) Restarting marked services... 
(3/6) Arming ConditionNeedsUpdate... 
(4/6) Refreshing PackageKit... 
(5/6) Reloading system bus configuration... 
(6/6) Checking which packages need to be rebuilt 
:: Paketdatenbanken werden synchronisiert … 
endeavouros ist aktuell 
core ist aktuell 
extra ist aktuell 
multilib ist aktuell 
:: Vollständige Systemaktualisierung wird gestartet … 
Es gibt nichts zu tun 
==> Erstelle Paket: ddccontrol 1.0.3-3 (Sa 14 Dez 2024 12:45:06 CET) 
==> Prüfe Laufzeit-Abhängigkeiten... 
==> Prüfe Buildtime-Abhängigkeiten... 
==> Empfange Quellen... 
 -> ddccontrol-1.0.3.tar.gz gefunden 
==> Überprüfe source Dateien mit sha512sums... 
   ddccontrol-1.0.3.tar.gz ... Erfolg 
==> Entferne existierendes $srcdir/ Verzeichnis... 
==> Entpacke Quellen... 
 -> Entpacke ddccontrol-1.0.3.tar.gz mit bsdtar 
==> Beginne prepare()... 
Running autoreconf... 
Copying file ABOUT-NLS 
Copying file config.rpath 
Creating directory m4 
Copying file m4/codeset.m4 
Copying file m4/fcntl-o.m4 
Copying file m4/gettext.m4 
Copying file m4/glibc2.m4 
Copying file m4/glibc21.m4 
Copying file m4/iconv.m4 
Copying file m4/intdiv0.m4 
Copying file m4/intl.m4 
Copying file m4/intldir.m4 
Copying file m4/intlmacosx.m4 
Copying file m4/intmax.m4 
Copying file m4/inttypes-pri.m4 
Copying file m4/inttypes_h.m4 
Copying file m4/lcmessage.m4 
Copying file m4/lib-ld.m4 
Copying file m4/lib-link.m4 
Copying file m4/lib-prefix.m4 
Copying file m4/lock.m4 
Copying file m4/longlong.m4 
Copying file m4/nls.m4 
Copying file m4/po.m4 
Copying file m4/printf-posix.m4 
Copying file m4/progtest.m4 
Copying file m4/size_max.m4 
Copying file m4/stdint_h.m4 
Copying file m4/threadlib.m4 
Copying file m4/uintmax_t.m4 
Copying file m4/visibility.m4 
Copying file m4/wchar_t.m4 
Copying file m4/wint_t.m4 
Copying file m4/xsize.m4 
Copying file po/Makefile.in.in 
Copying file po/Makevars.template 
Copying file po/Rules-quot 
libtoolize: putting auxiliary files in '.'. 
libtoolize: copying file './ltmain.sh' 
libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. 
libtoolize: copying file 'm4/libtool.m4' 
libtoolize: copying file 'm4/ltoptions.m4' 
libtoolize: copying file 'm4/ltsugar.m4' 
libtoolize: copying file 'm4/ltversion.m4' 
libtoolize: copying file 'm4/lt~obsolete.m4' 
configure.ac:8: warning: AM_PROG_MKDIR_P: this macro is deprecated, and will soon be removed. 
configure.ac:8: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, 
configure.ac:8: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. 
./lib/autoconf/general.m4:2434: AC_DIAGNOSE is expanded from... 
aclocal.m4:1121: AM_PROG_MKDIR_P is expanded from... 
m4/po.m4:23: AM_PO_SUBDIRS is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:8: warning: The macro 'AC_TRY_LINK' is obsolete. 
configure.ac:8: You should run autoupdate. 
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... 
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... 
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/intlmacosx.m4:18: gt_INTL_MACOSX is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:8: warning: The macro 'AC_TRY_LINK' is obsolete. 
configure.ac:8: You should run autoupdate. 
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... 
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... 
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:8: warning: The macro 'AC_TRY_LINK' is obsolete. 
configure.ac:8: You should run autoupdate. 
./lib/autoconf/general.m4:2918: AC_TRY_LINK is expanded from... 
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... 
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/iconv.m4:20: AM_ICONV_LINK is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:8: warning: The macro 'AC_TRY_RUN' is obsolete. 
configure.ac:8: You should run autoupdate. 
./lib/autoconf/general.m4:2995: AC_TRY_RUN is expanded from... 
lib/m4sugar/m4sh.m4:690: _AS_IF_ELSE is expanded from... 
lib/m4sugar/m4sh.m4:697: AS_IF is expanded from... 
./lib/autoconf/general.m4:2249: AC_CACHE_VAL is expanded from... 
./lib/autoconf/general.m4:2270: AC_CACHE_CHECK is expanded from... 
m4/iconv.m4:20: AM_ICONV_LINK is expanded from... 
m4/gettext.m4:57: AM_GNU_GETTEXT is expanded from... 
configure.ac:8: the top level 
configure.ac:51: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body 
./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... 
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from... 
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from... 
configure.ac:51: the top level 
configure.ac:64: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body 
./lib/autoconf/lang.m4:199: AC_LANG_CONFTEST is expanded from... 
./lib/autoconf/general.m4:2821: _AC_COMPILE_IFELSE is expanded from... 
./lib/autoconf/general.m4:2837: AC_COMPILE_IFELSE is expanded from... 
configure.ac:64: the top level 
configure.ac:8: warning: The 'AM_PROG_MKDIR_P' macro is deprecated, and its use is discouraged. 
configure.ac:8: You should use the Autoconf-provided 'AC_PROG_MKDIR_P' macro instead, 
configure.ac:8: and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files. 
configure.ac:14: installing './ar-lib' 
configure.ac:8: installing './compile' 
configure.ac:8: installing './config.guess' 
configure.ac:8: installing './config.sub' 
configure.ac:5: installing './install-sh' 
configure.ac:5: installing './missing' 
src/daemon/Makefile.am: installing './depcomp' 
Running intltoolize... 
You should update your 'aclocal.m4' by running aclocal. 
==> Quellen sind fertig. 
-> ddccontrol-1.0.3-3 Bereits erledigt -- Build wird übersprungen 
==> Erstelle Paket: ddccontrol 1.0.3-3 (Sa 14 Dez 2024 12:45:14 CET) 
==> Prüfe Laufzeit-Abhängigkeiten... 
==> Prüfe Buildtime-Abhängigkeiten... 
==> WARNUNG: Verwende bestehenden $srcdir/ Baum 
==> Quellen sind fertig. 
Pakete werden geladen … 
Abhängigkeiten werden aufgelöst … 
Nach in Konflikt stehenden Paketen wird gesucht … 

Paket (1)    Alte Version  Neue Version  Netto-Veränderung 

gddccontrol  1.0.3-1       1.0.3-3                0,00 MiB 

Gesamtgröße der installierten Pakete:  0,06 MiB 
Größendifferenz der Aktualisierung:    0,00 MiB 

:: Installation fortsetzen? [J/n] J 
(1/1) Schlüssel im Schlüsselbund werden geprüft                                                      [-----------------------------------------------------------] 100% 
(1/1) Paket-Integrität wird überprüft                                                                [-----------------------------------------------------------] 100% 
(1/1) Paket-Dateien werden geladen                                                                   [-----------------------------------------------------------] 100% 
(1/1) Auf Dateikonflikte wird geprüft                                                                [-----------------------------------------------------------] 100% 
(1/1) Verfügbarer Festplattenspeicher wird ermittelt                                                 [-----------------------------------------------------------] 100% 
:: Paketänderungen werden verarbeitet … 
(1/1) Aktualisiert wird gddccontrol                                                                  [-----------------------------------------------------------] 100% 
:: Post-transaction-Hooks werden gestartet … 
(1/5) Arming ConditionNeedsUpdate... 
(2/5) Refreshing PackageKit... 
(3/5) Updating icon theme caches... 
(4/5) Checking which packages need to be rebuilt 
(5/5) Updating the desktop file MIME type cache... 
Abhängigkeiten werden geprüft … 

Paket (1)  Alte Version  Netto-Veränderung 

intltool   0.51.0-6              -0,15 MiB 

Gesamtgröße der entfernten Pakete:  0,15 MiB 

:: Möchten Sie diese Pakete entfernen? [J/n]  
:: Paketänderungen werden verarbeitet … 
(1/1) Entfernung läuft intltool                                                                      [-----------------------------------------------------------] 100% 
:: Post-transaction-Hooks werden gestartet … 
(1/2) Arming ConditionNeedsUpdate... 
(2/2) Refreshing PackageKit...

wer es bis hier geschafft hat :sweat_smile: Gratulation!!!

Gruß an Nerdistan - Michael

Bitte nutze für die 
Terminalausgabe 
vorformatierter Text. 
Damit kann man 
Seitenlange Ausgaben lesen 
ohne 
nach drei Sätzen 
abzubrechen
1 Like

Bin etwas verwirrt. Was genau ist nun das Problem?

@swh - sorry, Du hast natürlich recht.
@IOF - Problem Rechner 1: amdgpu - stop
Rechner 2: Findest Du ein solches Update-Protokoll für den “normalen” Nutzer o.k.? Wirklich?

Der Log zeigt das Build Protokoll von AUR Paketen. Wenn man etwas baut kann das ggf. von Interesse sein.

Sind wir denn “normale” Nutzer?

@IOF - schon klar! Aber hilfreich für … s.o?

Dann musst halt das AUR PKGBUILD anpassen, sodass der Compiler keine Ausgabe tätigt. Hilfreich ist ja so eine Sache. Falls der Kram fehlschlägt, ist es definitiv hilfreich für den Maintainer, wenn du ihm den Fehler schicken kannst.

AUR Pakete werden vom Nutzer in Eigenverantwortung installiert und aktualisiert. Wenn ein Paket kompiliert werden muss, dann ist dies die gewöhnliche Ausgabe. :person_shrugging:

Falls das nicht zugemutet werden kann, darf man das AUR nicht verwenden oder muss eine andere Distribution wählen. Das ist völlig legitim, nicht jeder kann oder will diese Ausgabe oder das Prozedere verstehen.

PS: Du kannst normalerweise den Zeilenpuffer in der Terminalapp erhöhen (e.g. Konsole).

2 Likes

@all: Normal - ja, da gibt es schon Abstufungen :smile:

Aber wenn der Output schon “abgeschnitten” wird nach xxxx Zeilen (ich hab nicht gezählt), ist die Frage m.E. berechtigt

Und eine andere Distri oder kein AUR - super Tipp! :rofl:

Kritik ist der erste Schritt zur Verbesserung (z.B. Logfile - nur Extrakt auf den Monitor).
Hab extra geschrieben - Default-Output…
So sieht man den Wald vor lauter Bäumen nicht!

Wir sitzen nicht bei dir vorm Rechner, wir wissen nicht welche Desktop-Umgebung du verwendest, geschweige denn welches Terminal. Wir können somit alle nur raten, warum du nur 1000 Zeilen hast.

Der Punkt ist, dass viele Leute die Arch verwenden diese Ausgabe sehen wollen. Mehr lässt sich dazu nicht sagen.

1 Like

Was läuft falsch bei Arch oder EOS?

Nix. Das sind wie von den Vorpostern schon gesagt die üblichen Meldungen beim Kompilieren.
Und user einer ‘terminal centric distribution’ haben die bestimmt auch deswegen gewählt, weil sie viel tiefer reinschauen können als bei Systemen, die solche Meldungen vor den Usern verbergen

Um es mal ähnlich provokant umzuformulieren:

Was läuft falsch bei der Erwartung von MichaelP an Arch oder EOS?

1 Like

@Grotehesk
Ist nichtr provokant - kann ich mit umgehen - was läuft falsch bei meiner Erwartung?

@Schlaefer
KDE Plasma - Kernel 6.12.4

Warum ich nur 1000 Zeilen Terminalpuffer hab - ist wohl Default!
Aber das ist doch nicht mein Kritikpunkt!

Jeder sollte alles lesen können - bei Bedarf. Schau Dir doch mal aus diesem Blickwinkel den Output an? Ernsthaft - jedes File, jeder Compilerswitch… :melting_face:

Ich könnte mir mit etwas Phantasie vorstellen

AUR Paket xxxx kompiliert…
0 Error / 3 Warnings
see Logfile yyyy.zzz

Hier sind die Meinungen sehr unterschiedlich - ist ja auch o.k.
Aber - der Linux Desktop aller Distributionen dümpelt seit Jahren bei insgesamt 4.x%. :wink:
Nachzudenken warum wäre wirklich nicht verkehrt.

@all
So, von meiner Seite genug zu dem Thema - es bleibt aber der Hänger beim Booten vom Laptop.

Ideapad 3 mit Ryzen35xx plus integierter AMD Vega Grafik.

amdgpu 0000:03.00.0: amdgpu: Secure display: Generic Failure
amdgpu 0000:03.00.0: amdgpu: SECUREDISPLAY: query securedisplay TA failed. ret 0

securedisplay TA failed sagt mir nix. Hat da jemand noch einen Tipp?

Gruß Michael

Arch funktioniert so wie die Arch Entwickler und viele Nutzer es sich wünschen. Es wird deshalb wahrscheinlich schwierig, Arch in eine andere Richtung zu schieben. Besser ist es eine Distro zu verwenden, die sich bereits mit diesem Ziel an der “Normalnutzer”-freundlicheren Position befindet.


Ich würde als erstes den LTS-Kernel probieren. Zudem gab es Berichte mit AMD Problemen in mesa 24.3.1, probier mal ein downgrade auf 24.3.0.

@Schlaefer - danke, probier ich…
Hab “unbedarfteren” Kollegen Mint empfohlen & installiert. War mein Fall nicht - EOS ist generell schon o.k. und gerade deswegen Kritik wert. Wenn aber durch Updates Bluetooth abgeschaltet wird und das geänderte Login-Wallpaper wieder die Default-Rakete ist, darf man m.E. meckern. :hugs:

Ich habe hier auch eine AMD APU, also integrierte AMD Grafik.
Die Ursache ist das mesa-update auf 24.3.1-x. Downgrade die Pakete ‘mesa’ auf 24.2.7-x und ‘vulkan-radeon’ auf 24.2.7-x. Bei mir ist seitdem Ruhe (freezings).

Natürlich ist das keine Dauerlösung. Die Community hält den bug aber anscheinend für behoben. Betroffen waren KDE’ler mit Wayland. Ich habe hier aber Xfce mit X.
Meine Vermutung: APU user (vermutlich nur AMD) sind nach wie vor betroffen.

https://bbs.archlinux.org/viewtopic.php?id=301584

Jemand sollte den Bug melden!

@orbit-oc
Bei mir ist ein Lenovo Ideapad 13 mit Ryzen 3550H betroffen, das Teil hat ja auch die interne Vega-Grafik (Mesa 24.3.1-3). Nutze KDE-Plasma 6.12.4 (X11, hab aber auch Wayland probiert). :-1:
Hab die Beiträge deines Links gelesen, dort soll angeblich MESA 23.3.1-2 o.k. sein.
@Schlaefer: Booten mit letztem LTE-Kernel (glaub aktuell 6.6.35) änderte auch nichts.
@milkytwix: n.C.-sorry

Wenn dich das Konsolenzentrische an einer Konsolenzentrischen Distribution stört, ist diese Distribution nichts für dich.

5 Likes

Wenn du bei der Installation eines Paketes die ganzen “build()” Informationen nicht sehen möchtest, gibt es folgenden Weg (eher unschönen Hack):

yay -S <AUR-Paket> --noconfirm > /dev/null

Dieser Befehl unterdrückt alle Ausgaben, einschließlich der Build-Informationen. Wenn du nur die Erfolgs- oder Fehlermeldung sehen möchtest, kannst du die Standardausgabe nach /dev/null umleiten und die Standardfehlerausgabe sichtbar lassen.

Weshalb man aber auf die Idee kommt, dies tatsächlich zu wollen und umzusetzen, ist mir ein Rätsel!

1 Like

So kommt es aber nicht in ein Log, wie vorgeschlagen.