# USB MIDI Keyboard Inputs Not Recognized

**URL:** <https://forum.endeavouros.com/t/usb-midi-keyboard-inputs-not-recognized/82235>\
**Category:** Kernel, boot, graphics & hardware\
**Created:** [October 30, 2026, 11:44pm UTC](https://forum.endeavouros.com/t/usb-midi-keyboard-inputs-not-recognized/82235 "2026-10-30T23:44:54Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maery](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/m/a8b319/32.png) [@Maery](https://forum.endeavouros.com/u/Maery)\
**Post date:** [October 30, 2026, 11:44pm UTC](https://forum.endeavouros.com/t/usb-midi-keyboard-inputs-not-recognized/82235/1 "2026-10-30T23:44:54Z")

</div>

I recently developed, maybe a couple weeks at the oldest, an extremely odd issue where my MIDI keyboard (some cheap thing off amazon) that I use over USB will be recognized by everything, but no input will be registered or sent anywhere.

On Windows, it works perfectly fine, so I know it isn’t an issue with the keyboard itself.  
In Linux, I can detect that it is registered with `lsusb`and `aplaymidi -l` & know it isn’t just piped into itself by looking at qpwgraph. I have tried multiple cables in multiple ports & the behavior remains the same.

Here, I have run into a brick wall with what I know what to do or check for! Pretty much any help would be appreciated! The closest lead I have is that `dmesg | grep -i midi` will will output after the device is plugged in `usb 1-1: Quirk or no altset; falling back to MIDI 1.0` but so far, I haven’t found anything useful to this specific issue.

Quick Edit: I also know that it is not stuck in some output mode, as I used `aplaymidi -p 16 gbuster.mid` to try and play a ghostbusters midi through it.
