Unable to connect Xbox Gamepad with Computer

I want to connect my Xbox wireless gamepad and thought I could use a Netis WF2190 adapter for this. I activated Bluetooth, installed the module

yay -S rtl8812au-dkms-git

plugged the adapter and tried some USB slots but the Gamepad doesn’t show up as a connected device.
Do you have any ideas what’s wrong or missing?

Can you please explain, what you did to activate bluetooth?
And why are you activating bluetooth if Netis WF2190 is a WiFi adapter?

Can you please post the result of inxi -EJnxxxz?

You most likely need the xpad package. If it’s an Xbox one or one of the series elite models you’re trying to use via Bluetooth, you will also need xpadneo from the aur.

Sure! I noticed my B550I AORUS PRO AX already provides an antenna so I uninstalled the package rtl8812au-dkms-git and replaced the adapter with the antenna.

Can you please explain, what you did to activate bluetooth?

To activate bluetooth I executed systemctl enable bluetooth ( and start )

And why are you activating bluetooth if Netis WF2190 is a WiFi adapter?

Sorry, I’m a noob. I’m just trying out things

Can you please post the result of inxi -EJnxxxz?

Network:
  Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
    pcie: speed: 5 GT/s lanes: 1 port: f000 bus-ID: 06:00.0 chip-ID: 10ec:8125
    class-ID: 0200
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie:
    speed: 5 GT/s lanes: 1 bus-ID: 07:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlan0 state: down mac: <filter>
  IF-ID-1: docker0 state: down mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 bus-ID: 1-8:3 chip-ID: 8087:0029 class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
    lmp-v: 11 class-ID: 7c0104
USB:
  Hub-1: 1-0:1 info: hi-speed hub with single TT ports: 10 rev: 2.0
    speed: 480 Mb/s lanes: 1 chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 1-7:2 info: Integrated Express RGB LED Controller type: HID
    driver: hid-generic,usbhid interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1
    power: 100mA chip-ID: 048d:5702 class-ID: 0300
  Device-2: 1-8:3 info: Intel AX200 Bluetooth type: bluetooth driver: btusb
    interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA
    chip-ID: 8087:0029 class-ID: e001
  Hub-2: 2-0:1 info: super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    lanes: 1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-3: 3-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0
    speed: 480 Mb/s lanes: 1 chip-ID: 1d6b:0002 class-ID: 0900
  Hub-4: 3-3:2 info: Realtek RTS5411 Hub ports: 4 rev: 2.1 speed: 480 Mb/s
    lanes: 1 chip-ID: 0bda:5411 class-ID: 0900
  Device-1: 3-3.2:4 info: Logitech Unifying Receiver
    type: keyboard,mouse,HID driver: logitech-djreceiver,usbhid interfaces: 3
    rev: 2.0 speed: 12 Mb/s lanes: 1 power: 98mA chip-ID: 046d:c52b
    class-ID: 0300
  Device-2: 3-3.3:5 info: Logitech Logi Bolt Receiver
    type: keyboard,mouse,HID driver: hid-generic,usbhid interfaces: 3 rev: 2.0
    speed: 12 Mb/s lanes: 1 power: 98mA chip-ID: 046d:c548 class-ID: 0300
  Device-3: 3-3.4:6 info: Corsair HS80 RGB Wireless Gaming Receiver
    type: audio,HID driver: hid-generic,snd-usb-audio,usbhid interfaces: 5
    rev: 2.0 speed: 12 Mb/s lanes: 1 power: 500mA chip-ID: 1b1c:0a6b
    class-ID: 0300 serial: <filter>
  Device-4: 3-4:3 info: C-Media CM102-A+/102S+ Audio Controller type: audio
    driver: snd-usb-audio interfaces: 2 rev: 1.1 speed: 12 Mb/s lanes: 1
    power: 500mA chip-ID: 0d8c:0103 class-ID: 0102
  Hub-5: 4-0:1 info: super-speed hub ports: 4 rev: 3.1 speed: 10 Gb/s
    lanes: 1 chip-ID: 1d6b:0003 class-ID: 0900
  Hub-6: 4-3:2 info: Realtek Hub ports: 4 rev: 3.2 speed: 5 Gb/s lanes: 1
    chip-ID: 0bda:0411 class-ID: 0900

xpad seems to be shipped by default I guess? It’s already installed ( checked with lsmod | grep xpad )

Are you sure I should install xpadneo? Because then I have to replace it with xpad I think

I have to use it for my series elite controller for Bluetooth.

Thanks for your clarifications!
Your hardware seems to be fine.
Have you looked at https://wiki.archlinux.org/title/Gamepad?