Greetings lovely community,
Just did an update today (haven’t done one since Monday, so a few new things stuck out!), and was just curious about a few things that showed up and would appreciate any feedback in helping me understand some of these “warnings” a little bit better, thanks as always for your time! (full update log below at the bottom btw)
Warning #1:
:: Running pre-transaction hooks...
(1/2) Removing linux initcpios...
(2/2) Remove DKMS modules
==> Unable to remove module nvidia/470.63.01 for kernel 5.10.62-1-lts: Not found in dkms status output.
==> Unable to remove module nvidia/470.63.01 for kernel 5.13.13-arch1-1: Not found in dkms status output.
Question #1:
Am I supposed to have some nvidia modules? I’ve got an nvidia/intel hybrid setup, which I’ve used the EndeavourOS wikis to set up, everything has been working just fine. Just wanted to see if I’m supposed to have some sort of modules or if I can safely ignore this warning? I’m assuming modules are more for devs or testers, but I’m not really sure in this regard so any clarification would be appreciated!
Warning #2:
(12/17) Fix 'grub' and 'os-prober' after upgrading either of them.
===> INFO: grub-tools / grub-fix-initrd-generation:
===> INFO: /etc/grub.d/30_os-prober changed. See file /var/log/grub-fix-initrd-generation.log.
===> INFO: /etc/grub.d/10_linux changed. See file /var/log/grub-fix-initrd-generation.log.
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux-lts
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-lts.img
Found fallback initrd image(s) in /boot: intel-ucode.img initramfs-linux-lts-fallback.img
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux.img
Found fallback initrd image(s) in /boot: intel-ucode.img initramfs-linux-fallback.img
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
(13/17) Check if user should be informed about rebooting after certain system package upgrades.
Reboot is recommended because of recent core system package upgrades.
Questions #2:
“Fix grub and os-prober after upgrading either of them” – For this warning I will say I do not dual boot anything, only EndeavourOS is on my laptop; I know there was some os-prober issuer a month or so ago that caused a brief panic with dual booters, but for myself I just want to make sure this warning doesn’t relate to me and can also be safely ignored OR is there anything I have to run to fix grub which I do have installed. Feel free to give me any relevant knowledge on this matter, it’d be very helpful!
For the full update log via the yay command, see below and as always, thanks for taking the time to read my post:
[scott@endeavourOS ~]$ yay
[sudo] password for scott:
:: Synchronizing package databases...
core 136.1 KiB 469 KiB/s 00:00 [-----------------------] 100%
extra 1588.1 KiB 2.98 MiB/s 00:01 [-----------------------] 100%
community 5.8 MiB 6.87 MiB/s 00:01 [-----------------------] 100%
multilib 149.6 KiB 467 KiB/s 00:00 [-----------------------] 100%
endeavouros 21.2 KiB 30.3 KiB/s 00:01 [-----------------------] 100%
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
warning: insufficient columns available for table display
Packages (59) alsa-card-profiles-1:0.3.35-1 ca-certificates-mozilla-3.70-1
edk2-ovmf-202108-1 eos-bash-shared-1.10-1 firefox-92.0-1
fuse-common-3.10.5-1 fuse3-3.10.5-1 geoclue-2.5.7-4
gnome-documents-3.34.0+34+g678141fa-1 grub-2:2.06-2
gst-plugin-pipewire-1:0.3.35-1 harfbuzz-2.9.1-1
harfbuzz-icu-2.9.1-1 js78-78.14.0-1 krb5-1.19.2-1
libdazzle-3.42.0-1 libedit-20210714_3.1-1 libhandy-1.4.0-1
libnsl-2.0.0-1 libnss_nis-3.1-3 libqmi-1.30.2-1 liburing-2.1-1
libxml2-2.9.12-2 libxslt-1.1.34-6 linux-5.14.2.arch1-2
linux-headers-5.14.2.arch1-2 linux-lts-5.10.63-1
linux-lts-headers-5.10.63-1 llvm-libs-12.0.1-4 nodejs-16.9.0-1
npm-7.23.0-1 nss-3.70-1 ntfs-3g-2021.8.22-1 ostree-2021.4-1
p7zip-1:17.04-3 perl-http-daemon-6.12-1 pipewire-1:0.3.35-1
pipewire-media-session-1:0.3.35-1 poppler-data-0.4.11-1
python-3.9.7-1 python-cryptography-3.4.8-2
python-google-api-core-2.0.1-1
python-google-api-python-client-2.19.1-1 python-packaging-20.9-2
python-setuptools-1:57.4.0-2 python-soupsieve-2.2.1-2
python2-2.7.18-4 qt5-base-5.15.2+kde+r222-2
qt5-wayland-5.15.2+kde+r30-1 r8168-8.049.02-16 retroarch-1.9.9-1
rust-1:1.55.0-1 smbclient-4.14.7-2 snappy-1.1.9-2
vulkan-headers-1:1.2.191-1 vulkan-icd-loader-1.2.190-1
wayland-protocols-1.22-1 welcome-3.14.12-1 wget-1.21.2-1
Total Download Size: 519.90 MiB
Total Installed Size: 1854.35 MiB
Net Upgrade Size: 6.40 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
llvm-libs-12.0.1... 24.4 MiB 4.12 MiB/s 00:06 [-----------------------] 100%
linux-headers-5.... 23.7 MiB 4.37 MiB/s 00:05 [-----------------------] 100%
linux-lts-header... 22.9 MiB 4.12 MiB/s 00:06 [-----------------------] 100%
firefox-92.0-1-x... 61.2 MiB 3.59 MiB/s 00:17 [-----------------------] 100%
rust-1:1.55.0-1-... 82.5 MiB 4.45 MiB/s 00:19 [-----------------------] 100%
python2-2.7.18-4... 13.6 MiB 4.28 MiB/s 00:03 [-----------------------] 100%
python-3.9.7-1-x... 11.0 MiB 5.65 MiB/s 00:02 [-----------------------] 100%
qt5-base-5.15.2+... 13.0 MiB 2.53 MiB/s 00:05 [-----------------------] 100%
nodejs-16.9.0-1-... 8.8 MiB 5.21 MiB/s 00:02 [-----------------------] 100%
linux-lts-5.10.6... 74.8 MiB 3.35 MiB/s 00:22 [-----------------------] 100%
js78-78.14.0-1-x... 10.5 MiB 4.40 MiB/s 00:02 [-----------------------] 100%
smbclient-4.14.7... 6.9 MiB 5.12 MiB/s 00:01 [-----------------------] 100%
edk2-ovmf-202108... 4.4 MiB 3.45 MiB/s 00:01 [-----------------------] 100%
retroarch-1.9.9-... 3.5 MiB 4.01 MiB/s 00:01 [-----------------------] 100%
poppler-data-0.4... 2041.5 KiB 4.23 MiB/s 00:00 [-----------------------] 100%
p7zip-1:17.04-3-... 2.6 MiB 5.15 MiB/s 00:01 [-----------------------] 100%
grub-2:2.06-2-x86_64 6.8 MiB 3.26 MiB/s 00:02 [-----------------------] 100%
python-google-ap... 2.4 MiB 3.42 MiB/s 00:01 [-----------------------] 100%
libqmi-1.30.2-1-... 1970.9 KiB 5.06 MiB/s 00:00 [-----------------------] 100%
npm-7.23.0-1-any 1986.8 KiB 4.62 MiB/s 00:00 [-----------------------] 100%
pipewire-1:0.3.3... 1402.4 KiB 3.42 MiB/s 00:00 [-----------------------] 100%
libxml2-2.9.12-2... 1337.7 KiB 5.23 MiB/s 00:00 [-----------------------] 100%
nss-3.70-1-x86_64 1573.2 KiB 3.27 MiB/s 00:00 [-----------------------] 100%
krb5-1.19.2-1-x86_64 1308.7 KiB 4.73 MiB/s 00:00 [-----------------------] 100%
vulkan-headers-1... 739.3 KiB 4.81 MiB/s 00:00 [-----------------------] 100%
wget-1.21.2-1-x86_64 739.1 KiB 4.01 MiB/s 00:00 [-----------------------] 100%
harfbuzz-2.9.1-1... 891.9 KiB 3.11 MiB/s 00:00 [-----------------------] 100%
qt5-wayland-5.15... 1123.9 KiB 3.66 MiB/s 00:00 [-----------------------] 100%
libhandy-1.4.0-1... 669.9 KiB 6.54 MiB/s 00:00 [-----------------------] 100%
ostree-2021.4-1-... 648.3 KiB 4.22 MiB/s 00:00 [-----------------------] 100%
gnome-documents-... 559.1 KiB 4.20 MiB/s 00:00 [-----------------------] 100%
libdazzle-3.42.0... 611.5 KiB 3.73 MiB/s 00:00 [-----------------------] 100%
ntfs-3g-2021.8.2... 557.4 KiB 3.89 MiB/s 00:00 [-----------------------] 100%
python-setuptool... 556.9 KiB 5.44 MiB/s 00:00 [-----------------------] 100%
python-cryptogra... 512.3 KiB 5.00 MiB/s 00:00 [-----------------------] 100%
libxslt-1.1.34-6... 348.4 KiB 3.78 MiB/s 00:00 [-----------------------] 100%
geoclue-2.5.7-4-... 176.1 KiB 3.44 MiB/s 00:00 [-----------------------] 100%
ca-certificates-... 325.8 KiB 3.53 MiB/s 00:00 [-----------------------] 100%
fuse3-3.10.5-1-x... 119.7 KiB 2.92 MiB/s 00:00 [-----------------------] 100%
vulkan-icd-loade... 110.3 KiB 2.69 MiB/s 00:00 [-----------------------] 100%
libedit-20210714... 109.3 KiB 2.67 MiB/s 00:00 [-----------------------] 100%
pipewire-media-s... 108.2 KiB 2.64 MiB/s 00:00 [-----------------------] 100%
python-google-ap... 94.3 KiB 1886 KiB/s 00:00 [-----------------------] 100%
r8168-8.049.02-1... 69.9 KiB 1747 KiB/s 00:00 [-----------------------] 100%
python-soupsieve... 60.9 KiB 2031 KiB/s 00:00 [-----------------------] 100%
wayland-protocol... 66.2 KiB 1655 KiB/s 00:00 [-----------------------] 100%
python-packaging... 52.9 KiB 1323 KiB/s 00:00 [-----------------------] 100%
liburing-2.1-1-x... 47.8 KiB 1595 KiB/s 00:00 [-----------------------] 100%
gst-plugin-pipew... 44.8 KiB 1494 KiB/s 00:00 [-----------------------] 100%
snappy-1.1.9-2-x... 26.5 KiB 884 KiB/s 00:00 [-----------------------] 100%
alsa-card-profil... 26.3 KiB 876 KiB/s 00:00 [-----------------------] 100%
libnsl-2.0.0-1-x... 21.8 KiB 726 KiB/s 00:00 [-----------------------] 100%
libnss_nis-3.1-3... 22.8 KiB 569 KiB/s 00:00 [-----------------------] 100%
perl-http-daemon... 18.3 KiB 611 KiB/s 00:00 [-----------------------] 100%
harfbuzz-icu-2.9... 7.6 KiB 255 KiB/s 00:00 [-----------------------] 100%
eos-bash-shared-... 38.6 KiB 155 KiB/s 00:00 [-----------------------] 100%
fuse-common-3.10... 2.6 KiB 87.8 KiB/s 00:00 [-----------------------] 100%
welcome-3.14.12-... 30.8 KiB 87.9 KiB/s 00:00 [-----------------------] 100%
linux-5.14.2.arc... 126.2 MiB 3.75 MiB/s 00:34 [-----------------------] 100%
Total (59/59) 519.9 MiB 15.4 MiB/s 00:34 [-----------------------] 100%
(59/59) checking keys in keyring [-----------------------] 100%
(59/59) checking package integrity [-----------------------] 100%
(59/59) loading package files [-----------------------] 100%
(59/59) checking for file conflicts [-----------------------] 100%
(59/59) checking available disk space [-----------------------] 100%
:: Running pre-transaction hooks...
(1/2) Removing linux initcpios...
(2/2) Remove DKMS modules
==> Unable to remove module nvidia/470.63.01 for kernel 5.10.62-1-lts: Not found in dkms status output.
==> Unable to remove module nvidia/470.63.01 for kernel 5.13.13-arch1-1: Not found in dkms status output.
:: Processing package changes...
( 1/59) upgrading alsa-card-profiles [-----------------------] 100%
( 2/59) upgrading krb5 [-----------------------] 100%
( 3/59) upgrading ca-certificates-mozilla [-----------------------] 100%
( 4/59) upgrading edk2-ovmf [-----------------------] 100%
( 5/59) upgrading wayland-protocols [-----------------------] 100%
( 6/59) upgrading libxml2 [-----------------------] 100%
( 7/59) upgrading harfbuzz [-----------------------] 100%
( 8/59) upgrading libedit [-----------------------] 100%
( 9/59) upgrading llvm-libs [-----------------------] 100%
(10/59) upgrading vulkan-icd-loader [-----------------------] 100%
(11/59) upgrading harfbuzz-icu [-----------------------] 100%
(12/59) upgrading libxslt [-----------------------] 100%
(13/59) upgrading libnsl [-----------------------] 100%
(14/59) upgrading python [-----------------------] 100%
(15/59) upgrading eos-bash-shared [-----------------------] 100%
(16/59) upgrading nss [-----------------------] 100%
(17/59) upgrading firefox [-----------------------] 100%
(18/59) upgrading fuse-common [-----------------------] 100%
(19/59) upgrading fuse3 [-----------------------] 100%
(20/59) upgrading geoclue [-----------------------] 100%
(21/59) upgrading libhandy [-----------------------] 100%
(22/59) upgrading js78 [-----------------------] 100%
(23/59) upgrading gnome-documents [-----------------------] 100%
(24/59) upgrading grub [-----------------------] 100%
(25/59) upgrading pipewire [-----------------------] 100%
(26/59) upgrading pipewire-media-session [-----------------------] 100%
(27/59) upgrading gst-plugin-pipewire [-----------------------] 100%
(28/59) upgrading libdazzle [-----------------------] 100%
(29/59) upgrading libnss_nis [-----------------------] 100%
(30/59) upgrading libqmi [-----------------------] 100%
(31/59) upgrading liburing [-----------------------] 100%
(32/59) upgrading linux [-----------------------] 100%
(33/59) upgrading linux-headers [-----------------------] 100%
(34/59) upgrading linux-lts [-----------------------] 100%
(35/59) upgrading linux-lts-headers [-----------------------] 100%
(36/59) upgrading nodejs [-----------------------] 100%
(37/59) upgrading npm [-----------------------] 100%
(38/59) upgrading ntfs-3g [-----------------------] 100%
(39/59) upgrading ostree [-----------------------] 100%
(40/59) upgrading p7zip [-----------------------] 100%
(41/59) upgrading perl-http-daemon [-----------------------] 100%
(42/59) upgrading poppler-data [-----------------------] 100%
(43/59) upgrading python-cryptography [-----------------------] 100%
(44/59) upgrading python-packaging [-----------------------] 100%
(45/59) upgrading python-setuptools [-----------------------] 100%
(46/59) upgrading python-google-api-core [-----------------------] 100%
(47/59) upgrading python-google-api-python-client [-----------------------] 100%
(48/59) upgrading python-soupsieve [-----------------------] 100%
(49/59) upgrading python2 [-----------------------] 100%
(50/59) upgrading qt5-base [-----------------------] 100%
(51/59) upgrading qt5-wayland [-----------------------] 100%
(52/59) upgrading r8168 [-----------------------] 100%
(53/59) upgrading retroarch [-----------------------] 100%
(54/59) upgrading rust [-----------------------] 100%
(55/59) upgrading smbclient [-----------------------] 100%
(56/59) upgrading snappy [-----------------------] 100%
(57/59) upgrading vulkan-headers [-----------------------] 100%
(58/59) upgrading welcome [-----------------------] 100%
(59/59) upgrading wget [-----------------------] 100%
:: Running post-transaction hooks...
( 1/17) Creating system user accounts...
( 2/17) Reloading system manager configuration...
( 3/17) Creating temporary files...
( 4/17) Reloading device manager configuration...
( 5/17) Arming ConditionNeedsUpdate...
( 6/17) Rebuilding certificate stores...
( 7/17) Updating module dependencies...
( 8/17) Install DKMS modules
==> dkms install --no-depmod -m nvidia -v 470.63.01 -k 5.14.2-arch1-2
==> dkms install --no-depmod -m nvidia -v 470.63.01 -k 5.10.63-1-lts
==> depmod 5.10.63-1-lts
==> depmod 5.14.2-arch1-2
( 9/17) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'default'
-> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts.img
==> Starting build: 5.10.63-1-lts
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-lts.preset: 'fallback'
-> -k /boot/vmlinuz-linux-lts -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-lts-fallback.img -S autodetect
==> Starting build: 5.10.63-1-lts
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-lts-fallback.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 5.14.2-arch1-2
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 5.14.2-arch1-2
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: xhci_pci
-> Running build hook: [keyboard]
-> Running build hook: [keymap]
-> Running build hook: [filesystems]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
(10/17) Reloading system bus configuration...
(11/17) Warn about old perl modules
(12/17) Fix 'grub' and 'os-prober' after upgrading either of them.
===> INFO: grub-tools / grub-fix-initrd-generation:
===> INFO: /etc/grub.d/30_os-prober changed. See file /var/log/grub-fix-initrd-generation.log.
===> INFO: /etc/grub.d/10_linux changed. See file /var/log/grub-fix-initrd-generation.log.
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-linux-lts
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-lts.img
Found fallback initrd image(s) in /boot: intel-ucode.img initramfs-linux-lts-fallback.img
Found linux image: /boot/vmlinuz-linux
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux.img
Found fallback initrd image(s) in /boot: intel-ucode.img initramfs-linux-fallback.img
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
done
(13/17) Check if user should be informed about rebooting after certain system package upgrades.
Reboot is recommended because of recent core system package upgrades.
(14/17) Compiling GSettings XML schema files...
(15/17) Updating icon theme caches...
(16/17) Updating the info directory file...
(17/17) Updating the desktop file MIME type cache...
:: Searching databases for updates...
:: Searching AUR for updates...
-> Flagged Out Of Date AUR Packages: minecraft-launcher
:: 2 Packages to upgrade.
2 aur/pika-backup 0.3.2-1 -> 0.3.5-1
1 aur/python-pulsectl 1:21.5.18-1 -> 1:21.9.1-1
==> Packages to exclude: (eg: "1 2 3", "1-3", "^4" or repo name)
==>
:: Checking for conflicts...
:: Checking for inner conflicts...
[Aur:2] pika-backup-0.3.5-1 python-pulsectl-1:21.9.1-1
2 pika-backup (Installed) (Build Files Exist)
1 python-pulsectl (Installed) (Build Files Exist)
==> Packages to cleanBuild?
==> [N]one [A]ll [Ab]ort [I]nstalled [No]tInstalled or (1 2 3, 1-3, ^4)
==>
:: Downloaded PKGBUILD (1/2): python-pulsectl
:: Downloaded PKGBUILD (2/2): pika-backup
2 pika-backup (Installed) (Build Files Exist)
1 python-pulsectl (Installed) (Build Files Exist)
==> Diffs to show?
==> [N]one [A]ll [Ab]ort [I]nstalled [No]tInstalled or (1 2 3, 1-3, ^4)
==>
:: (1/2) Parsing SRCINFO: pika-backup
:: (2/2) Parsing SRCINFO: python-pulsectl
==> Making package: pika-backup 0.3.5-1 (Fri 10 Sep 2021 01:45:58 PM CDT)
==> Retrieving sources...
-> Downloading pika-backup-v0.3.5.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 212k 100 212k 0 0 491k 0 --:--:-- --:--:-- --:--:-- 491k
-> Found remove-install_script.patch
==> Validating source files with sha256sums...
pika-backup-v0.3.5.tar.gz ... Passed
remove-install_script.patch ... Passed
==> Making package: python-pulsectl 1:21.9.1-1 (Fri 10 Sep 2021 01:45:59 PM CDT)
==> Retrieving sources...
-> Downloading pulsectl-21.9.1.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 277 100 277 0 0 2266 0 --:--:-- --:--:-- --:--:-- 2270
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 40432 100 40432 0 0 147k 0 --:--:-- --:--:-- --:--:-- 147k
==> Validating source files with sha256sums...
pulsectl-21.9.1.tar.gz ... Passed
==> Making package: pika-backup 0.3.5-1 (Fri 10 Sep 2021 01:46:00 PM CDT)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found pika-backup-v0.3.5.tar.gz
-> Found remove-install_script.patch
==> Validating source files with sha256sums...
pika-backup-v0.3.5.tar.gz ... Passed
remove-install_script.patch ... Passed
==> Removing existing $srcdir/ directory...
==> Extracting sources...
-> Extracting pika-backup-v0.3.5.tar.gz with bsdtar
==> Starting prepare()...
patching file data/meson.build
Downloaded crypto-mac v0.10.0
Downloaded nodrop v0.1.14
Downloaded block-modes v0.7.0
Downloaded aes v0.6.0
Downloaded num-format v0.4.0
Downloaded signal-hook-registry v1.3.0
Downloaded async-process v1.1.0
Downloaded async-trait v0.1.50
Downloaded strum v0.19.5
Downloaded strum_macros v0.19.4
Downloaded arc-swap v1.2.0
Downloaded quick-error v2.0.0
Downloaded signal-hook v0.3.8
Downloaded gettext-rs v0.7.0
Downloaded itertools v0.10.0
Downloaded tinyvec_macros v0.1.0
Downloaded syn v1.0.71
Downloaded block-padding v0.2.1
Downloaded scoped-tls v1.0.0
Downloaded void v1.0.2
Downloaded zbus v1.9.1
Downloaded url v2.2.1
Downloaded arrayvec v0.4.12
Downloaded tinyvec v1.2.0
Downloaded nix v0.17.0
Downloaded zvariant v2.6.0
Downloaded darling_macro v0.10.2
Downloaded zbus_macros v1.9.1
Downloaded enumflags2 v0.6.4
Downloaded zeroize v1.3.0
Downloaded darling v0.10.2
Downloaded serde_json v1.0.64
Downloaded num-iter v0.1.42
Downloaded percent-encoding v2.1.0
Downloaded byteorder v1.4.3
Downloaded remove_dir_all v0.5.3
Downloaded tempfile v3.2.0
Downloaded ident_case v1.0.1
Downloaded strsim v0.9.3
Downloaded form_urlencoded v1.0.1
Downloaded num-traits v0.2.14
Downloaded time v0.1.43
Downloaded hkdf v0.10.0
Downloaded ppv-lite86 v0.2.10
Downloaded bit-set v0.5.2
Downloaded shell-words v1.0.0
Downloaded nb-connect v1.1.0
Downloaded derive_builder v0.9.0
Downloaded darling_core v0.10.2
Downloaded libhandy v0.7.1
Downloaded idna v0.2.3
Downloaded getrandom v0.2.2
Downloaded subtle v2.4.0
Downloaded unicode-bidi v0.3.5
Downloaded hmac v0.10.1
Downloaded num-rational v0.3.2
Downloaded bit-vec v0.6.3
Downloaded enclose v1.1.8
Downloaded cipher v0.2.5
Downloaded rand_chacha v0.3.0
Downloaded enumflags2_derive v0.6.4
Downloaded num-complex v0.3.1
Downloaded num v0.3.1
Downloaded unicode-normalization v0.1.17
Downloaded fancy-regex v0.4.1
Downloaded libhandy-sys v0.7.0
Downloaded rand_core v0.6.2
Downloaded serde_repr v0.1.6
Downloaded rand v0.8.3
Downloaded fnv v1.0.7
Downloaded aho-corasick v0.7.15
Downloaded nix v0.20.0
Downloaded derive_builder_core v0.9.0
Downloaded num-bigint v0.3.2
Downloaded regex-syntax v0.6.23
Downloaded zxcvbn v2.1.1
Downloaded chrono v0.4.19
Downloaded aes-soft v0.6.4
Downloaded ashpd v0.1.0
Downloaded memchr v2.3.4
Downloaded secret-service v2.0.1
Downloaded matches v0.1.8
Downloaded num-integer v0.1.44
Downloaded regex v1.4.6
Downloaded gettext-sys v0.21.0
Downloaded itoa v0.4.7
Downloaded zvariant_derive v2.6.0
Downloaded 87 crates (10.8 MB) in 1.30s (largest was `gettext-sys` at 6.5 MB)
==> Sources are ready.
==> Making package: pika-backup 0.3.5-1 (Fri 10 Sep 2021 01:46:05 PM CDT)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> WARNING: Using existing $srcdir/ tree
==> Starting build()...
+ exec meson setup --prefix /usr --libexecdir lib --sbindir bin --buildtype plain --auto-features enabled --wrap-mode nodownload -D b_lto=true -D b_pie=true pika-backup-v0.3.5 build
The Meson build system
Version: 0.59.1
Source dir: /home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5
Build dir: /home/scott/.cache/yay/pika-backup/src/build
Build type: native build
Program /home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/build-aux/meson-cargo-manifest.py found: YES (/home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/build-aux/meson-cargo-manifest.py)
Program /home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/build-aux/meson-cargo-manifest.py found: YES (/home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/build-aux/meson-cargo-manifest.py)
Project name: pika-backup
Project version: 0.3.5
Rust compiler for the host machine: rustc -C linker=cc (rustc 1.55.0)
Rust linker for the host machine: rustc -C linker=cc ld.bfd 2.36.1
Host machine cpu family: x86_64
Host machine cpu: x86_64
Found pkg-config: /usr/bin/pkg-config (1.7.3)
Run-time dependency dbus-1 found: YES 1.12.20
Run-time dependency gtk+-3.0 found: YES 3.24.30
Run-time dependency libhandy-1 found: YES 1.4.0
Message: /etc
Program build-aux/meson-dist-vendor.sh found: YES (/home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/build-aux/meson-dist-vendor.sh)
Configuring tmp.app.desktop using configuration
Configuring tmp.app.metainfo.xml using configuration
Configuring org.gnome.World.PikaBackup.service using configuration
Program cargo found: YES (/usr/bin/cargo)
Program env found: YES (/usr/bin/env)
Program cp found: YES (/usr/bin/cp)
Program cp found: YES (/usr/bin/cp)
Build targets in project: 8
Found ninja-1.10.2 at /usr/bin/ninja
ninja: Entering directory `build'
[0/5] Generating cargo-build with a custom command
Updating crates.io index
Downloaded rand_chacha v0.3.0
Downloaded aes v0.6.0
Downloaded hkdf v0.10.0
Downloaded ident_case v1.0.1
Downloaded hmac v0.10.1
Downloaded concurrent-queue v1.2.2
Downloaded parking v2.0.0
Downloaded proc-macro-crate v0.1.5
Downloaded secret-service v2.0.1
Downloaded serde_repr v0.1.6
Downloaded proc-macro2 v1.0.26
Downloaded scoped-tls v1.0.0
Downloaded serde v1.0.125
Downloaded polling v2.0.3
Downloaded pin-project-lite v0.2.6
Downloaded signal-hook-registry v1.3.0
Downloaded sha2 v0.9.3
Downloaded signal-hook v0.3.8
Downloaded serde_derive v1.0.125
Downloaded futures-io v0.3.14
Downloaded futures v0.3.14
Downloaded futures-sink v0.3.14
Downloaded glib v0.10.3
Downloaded itertools v0.10.0
Downloaded same-file v1.0.6
Downloaded ryu v1.0.5
Downloaded serde_json v1.0.64
Downloaded proc-macro-error-attr v1.0.4
Downloaded shell-words v1.0.0
Downloaded matches v0.1.8
Downloaded subtle v2.4.0
Downloaded strum_macros v0.18.0
Downloaded locale_config v0.3.0
Downloaded pango v0.9.1
Downloaded cairo-rs v0.9.1
Downloaded syn v1.0.71
Downloaded time v0.1.43
Downloaded thiserror-impl v1.0.24
Downloaded tempfile v3.2.0
Downloaded waker-fn v1.1.0
Downloaded unicode-xid v0.2.2
Downloaded unicode-segmentation v1.7.1
Downloaded zvariant v2.6.0
Downloaded zbus v1.9.1
Downloaded system-deps v1.3.2
Downloaded thiserror v1.0.24
Downloaded aho-corasick v0.7.15
Downloaded strum v0.18.0
Downloaded nb-connect v1.1.0
Downloaded memchr v2.3.4
Downloaded itertools v0.9.0
Downloaded nix v0.17.0
Downloaded async-process v1.1.0
Downloaded block-padding v0.2.1
Downloaded cfg-if v0.1.10
Downloaded event-listener v2.5.1
Downloaded derive_builder_core v0.9.0
Downloaded getrandom v0.2.2
Downloaded futures-macro v0.3.14
Downloaded fastrand v1.4.1
Downloaded cc v1.0.67
Downloaded darling v0.10.2
Downloaded cipher v0.2.5
Downloaded cache-padded v1.1.1
Downloaded atk-sys v0.10.0
Downloaded block-modes v0.7.0
Downloaded async-trait v0.1.50
Downloaded arc-swap v1.2.0
Downloaded futures-lite v1.11.3
Downloaded walkdir v2.3.2
Downloaded void v1.0.2
Downloaded version_check v0.9.3
Downloaded typenum v1.13.0
Downloaded block-buffer v0.9.0
Downloaded tinyvec_macros v0.1.0
Downloaded byteorder v1.4.3
Downloaded bit-set v0.5.2
Downloaded bit-vec v0.6.3
Downloaded slab v0.4.3
Downloaded num v0.3.1
Downloaded nodrop v0.1.14
Downloaded nix v0.20.0
Downloaded num-complex v0.3.1
Downloaded pango-sys v0.10.0
Downloaded zbus_macros v1.9.1
Downloaded unicode-normalization v0.1.17
Downloaded fnv v1.0.7
Downloaded darling_core v0.10.2
Downloaded gettext-rs v0.7.0
Downloaded num-format v0.4.0
Downloaded gdk-pixbuf v0.9.0
Downloaded derivative v2.2.0
Downloaded num-integer v0.1.44
Downloaded glib-sys v0.10.1
Downloaded num-iter v0.1.42
Downloaded bitflags v1.2.1
Downloaded gdk v0.13.2
Downloaded quick-error v2.0.0
Downloaded percent-encoding v2.1.0
Downloaded num-rational v0.3.2
Downloaded gdk-sys v0.10.0
Downloaded futures-core v0.3.14
Downloaded num-bigint v0.3.2
Downloaded gio-sys v0.10.1
Downloaded form_urlencoded v1.0.1
Downloaded arrayvec v0.4.12
Downloaded opaque-debug v0.3.0
Downloaded regex-syntax v0.6.23
Downloaded gio v0.9.1
Downloaded cairo-sys-rs v0.10.0
Downloaded rand_core v0.6.2
Downloaded enumflags2 v0.6.4
Downloaded zxcvbn v2.1.1
Downloaded strum v0.19.5
Downloaded socket2 v0.4.0
Downloaded tinyvec v1.2.0
Downloaded strum_macros v0.19.4
Downloaded atk v0.9.0
Downloaded unicode-bidi v0.3.5
Downloaded url v2.2.1
Downloaded anyhow v1.0.40
Downloaded zvariant_derive v2.6.0
Downloaded version-compare v0.0.10
Downloaded num-traits v0.2.14
Downloaded libc v0.2.94
Downloaded pkg-config v0.3.19
Downloaded ppv-lite86 v0.2.10
Downloaded ashpd v0.1.0
Downloaded lazy_static v1.4.0
Downloaded cfg-if v1.0.0
Downloaded futures-channel v0.3.14
Downloaded enclose v1.1.8
Downloaded chrono v0.4.19
Downloaded glib-macros v0.10.1
Downloaded either v1.6.1
Downloaded remove_dir_all v0.5.3
Downloaded proc-macro-nested v0.1.7
Downloaded pin-utils v0.1.0
Downloaded enumflags2_derive v0.6.4
Downloaded autocfg v1.0.1
Downloaded async-io v1.4.1
Downloaded toml v0.5.8
Downloaded zeroize v1.3.0
Downloaded itoa v0.4.7
Downloaded libhandy-sys v0.7.0
Downloaded libhandy v0.7.1
Downloaded log v0.4.14
Downloaded strsim v0.9.3
Downloaded heck v0.3.2
Downloaded futures-util v0.3.14
Downloaded gobject-sys v0.10.0
Downloaded idna v0.2.3
Downloaded quote v1.0.9
Downloaded proc-macro-hack v0.5.19
Downloaded proc-macro-error v1.0.4
Downloaded rand v0.8.3
Downloaded gtk-sys v0.10.0
Downloaded aes-soft v0.6.4
Downloaded crypto-mac v0.10.0
Downloaded cpuid-bool v0.1.2
Downloaded derive_builder v0.9.0
Downloaded fancy-regex v0.4.1
Downloaded once_cell v1.7.2
Downloaded gdk-pixbuf-sys v0.10.0
Downloaded futures-task v0.3.14
Downloaded futures-executor v0.3.14
Downloaded digest v0.9.0
Downloaded generic-array v0.14.4
Downloaded regex v1.4.6
Downloaded gtk v0.9.2
Downloaded darling_macro v0.10.2
Downloaded gettext-sys v0.21.0
Downloaded 172 crates (14.5 MB) in 1.22s (largest was `gettext-sys` at 6.5 MB)
Compiling proc-macro2 v1.0.26
Compiling unicode-xid v0.2.2
Compiling syn v1.0.71
Compiling serde v1.0.125
Compiling serde_derive v1.0.125
Compiling unicode-segmentation v1.7.1
Compiling libc v0.2.94
Compiling pkg-config v0.3.19
Compiling strum v0.18.0
Compiling version-compare v0.0.10
Compiling version_check v0.9.3
Compiling memchr v2.3.4
Compiling futures-core v0.3.14
Compiling autocfg v1.0.1
Compiling proc-macro-hack v0.5.19
Compiling pin-project-lite v0.2.6
Compiling futures-io v0.3.14
Compiling slab v0.4.3
Compiling proc-macro-nested v0.1.7
Compiling getrandom v0.2.2
Compiling futures-sink v0.3.14
Compiling bitflags v1.2.1
Compiling futures-task v0.3.14
Compiling pin-utils v0.1.0
Compiling once_cell v1.7.2
Compiling cfg-if v1.0.0
Compiling typenum v1.13.0
Compiling anyhow v1.0.40
Compiling either v1.6.1
Compiling log v0.4.14
Compiling ppv-lite86 v0.2.10
Compiling gio v0.9.1
Compiling parking v2.0.0
Compiling pango v0.9.1
Compiling fnv v1.0.7
Compiling strsim v0.9.3
Compiling gdk-pixbuf v0.9.0
Compiling fastrand v1.4.1
Compiling cairo-rs v0.9.1
Compiling waker-fn v1.1.0
Compiling cache-padded v1.1.1
Compiling ident_case v1.0.1
Compiling regex-syntax v0.6.23
Compiling remove_dir_all v0.5.3
Compiling lazy_static v1.4.0
Compiling nix v0.17.0
Compiling gdk v0.13.2
Compiling matches v0.1.8
Compiling atk v0.9.0
Compiling cfg-if v0.1.10
Compiling cc v1.0.67
Compiling void v1.0.2
Compiling tinyvec_macros v0.1.0
Compiling opaque-debug v0.3.0
Compiling subtle v2.4.0
Compiling byteorder v1.4.3
Compiling arrayvec v0.4.12
Compiling derive_builder v0.9.0
Compiling ryu v1.0.5
Compiling bit-vec v0.6.3
Compiling signal-hook v0.3.8
Compiling scoped-tls v1.0.0
Compiling nodrop v0.1.14
Compiling percent-encoding v2.1.0
Compiling async-trait v0.1.50
Compiling serde_json v1.0.64
Compiling itoa v0.4.7
Compiling cpuid-bool v0.1.2
Compiling block-padding v0.2.1
Compiling strum v0.19.5
Compiling same-file v1.0.6
Compiling event-listener v2.5.1
Compiling quick-error v2.0.0
Compiling arc-swap v1.2.0
Compiling shell-words v1.0.0
Compiling zeroize v1.3.0
Compiling enclose v1.1.8
Compiling heck v0.3.2
Compiling futures-channel v0.3.14
Compiling gtk v0.9.2
Compiling proc-macro-error-attr v1.0.4
Compiling generic-array v0.14.4
Compiling proc-macro-error v1.0.4
Compiling num-traits v0.2.14
Compiling num-integer v0.1.44
Compiling num-bigint v0.3.2
Compiling num-rational v0.3.2
Compiling num-iter v0.1.42
Compiling itertools v0.9.0
Compiling concurrent-queue v1.2.2
Compiling unicode-bidi v0.3.5
Compiling tinyvec v1.2.0
Compiling bit-set v0.5.2
Compiling itertools v0.10.0
Compiling form_urlencoded v1.0.1
Compiling walkdir v2.3.2
Compiling quote v1.0.9
Compiling unicode-normalization v0.1.17
Compiling futures-lite v1.11.3
Compiling aho-corasick v0.7.15
Compiling num-format v0.4.0
Compiling socket2 v0.4.0
Compiling polling v2.0.3
Compiling time v0.1.43
Compiling signal-hook-registry v1.3.0
Compiling nix v0.20.0
Compiling idna v0.2.3
Compiling regex v1.4.6
Compiling rand_core v0.6.2
Compiling nb-connect v1.1.0
Compiling num-complex v0.3.1
Compiling async-io v1.4.1
Compiling cipher v0.2.5
Compiling digest v0.9.0
Compiling crypto-mac v0.10.0
Compiling block-buffer v0.9.0
Compiling url v2.2.1
Compiling rand_chacha v0.3.0
Compiling locale_config v0.3.0
Compiling fancy-regex v0.4.1
Compiling async-process v1.1.0
Compiling aes-soft v0.6.4
Compiling block-modes v0.7.0
Compiling hmac v0.10.1
Compiling sha2 v0.9.3
Compiling darling_core v0.10.2
Compiling rand v0.8.3
Compiling aes v0.6.0
Compiling hkdf v0.10.0
Compiling tempfile v3.2.0
Compiling num v0.3.1
Compiling thiserror-impl v1.0.24
Compiling strum_macros v0.18.0
Compiling futures-macro v0.3.14
Compiling enumflags2_derive v0.6.4
Compiling derivative v2.2.0
Compiling serde_repr v0.1.6
Compiling strum_macros v0.19.4
Compiling darling_macro v0.10.2
Compiling futures-util v0.3.14
Compiling thiserror v1.0.24
Compiling gettext-sys v0.21.0
Compiling darling v0.10.2
Compiling derive_builder_core v0.9.0
Compiling gettext-rs v0.7.0
Compiling futures-executor v0.3.14
Compiling futures v0.3.14
Compiling enumflags2 v0.6.4
Compiling chrono v0.4.19
Compiling toml v0.5.8
Compiling zxcvbn v2.1.1
Compiling system-deps v1.3.2
Compiling proc-macro-crate v0.1.5
Compiling glib-sys v0.10.1
Compiling gobject-sys v0.10.0
Compiling gio-sys v0.10.1
Compiling gdk-pixbuf-sys v0.10.0
Compiling cairo-sys-rs v0.10.0
Compiling pango-sys v0.10.0
Compiling gdk-sys v0.10.0
Compiling atk-sys v0.10.0
Compiling glib-macros v0.10.1
Compiling gtk-sys v0.10.0
Compiling zvariant_derive v2.6.0
Compiling libhandy-sys v0.7.0
Compiling zbus_macros v1.9.1
Compiling glib v0.10.3
Compiling zvariant v2.6.0
Compiling zbus v1.9.1
Compiling secret-service v2.0.1
Compiling ashpd v0.1.0
Compiling libhandy v0.7.1
Compiling pika-backup v0.3.5 (/home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5)
Finished release [optimized] target(s) in 6m 13s
[5/5] Generating cp-binary with a custom command
==> Entering fakeroot environment...
==> Starting package()...
ninja: Entering directory `/home/scott/.cache/yay/pika-backup/src/build'
[0/3] Generating cargo-build with a custom command
Finished release [optimized] target(s) in 0.13s
[3/3] Generating cp-binary with a custom command
Installing data/org.gnome.World.PikaBackup.desktop to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/usr/share/applications
Installing data/org.gnome.World.PikaBackup.metainfo.xml to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/usr/share/metainfo
Installing src/pika-backup to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/usr/bin
This file does not have an rpath.
This file does not have a runpath.
Installing src/pika-backupd to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/usr/bin
This file does not have an rpath.
This file does not have a runpath.
Installing /home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/data/app.Daemon.desktop to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/etc/xdg/autostart
Installing /home/scott/.cache/yay/pika-backup/src/build/data/org.gnome.World.PikaBackup.service to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/usr/share/dbus-1/services
Installing /home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/data/app-symbolic.svg to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/usr/share/icons/hicolor/scalable/apps
Installing /home/scott/.cache/yay/pika-backup/src/pika-backup-v0.3.5/data/app.svg to /home/scott/.cache/yay/pika-backup/pkg/pika-backup/usr/share/icons/hicolor/scalable/apps
Running custom install script '/usr/bin/meson --internal gettext install --subdir=po --localedir=share/locale --pkgname=pika-backup'
==> Tidying install...
-> Removing libtool files...
-> Purging unwanted files...
-> Removing static library files...
-> Stripping unneeded symbols from binaries and libraries...
-> Compressing man and info pages...
==> Checking for packaging issues...
==> WARNING: Package contains reference to $srcdir
usr/bin/pika-backup
usr/bin/pika-backupd
==> Creating package "pika-backup"...
-> Generating .PKGINFO file...
-> Generating .BUILDINFO file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: pika-backup 0.3.5-1 (Fri 10 Sep 2021 01:52:23 PM CDT)
==> Cleaning up...
[sudo] password for scott:
loading packages...
resolving dependencies...
looking for conflicting packages...
Package (1) Old Version New Version Net Change
pika-backup 0.3.2-1 0.3.5-1 -0.04 MiB
Total Installed Size: 7.94 MiB
Net Upgrade Size: -0.04 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [-----------------------] 100%
(1/1) checking package integrity [-----------------------] 100%
(1/1) loading package files [-----------------------] 100%
(1/1) checking for file conflicts [-----------------------] 100%
(1/1) checking available disk space [-----------------------] 100%
:: Processing package changes...
(1/1) upgrading pika-backup [-----------------------] 100%
:: Running post-transaction hooks...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Updating icon theme caches...
(3/3) Updating the desktop file MIME type cache...
==> Making package: python-pulsectl 1:21.9.1-1 (Fri 10 Sep 2021 01:52:29 PM CDT)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found pulsectl-21.9.1.tar.gz
==> Validating source files with sha256sums...
pulsectl-21.9.1.tar.gz ... Passed
==> Removing existing $srcdir/ directory...
==> Extracting sources...
-> Extracting pulsectl-21.9.1.tar.gz with bsdtar
==> Sources are ready.
==> Making package: python-pulsectl 1:21.9.1-1 (Fri 10 Sep 2021 01:52:30 PM CDT)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> WARNING: Using existing $srcdir/ tree
==> Starting build()...
running build
running build_py
creating build
creating build/lib
creating build/lib/pulsectl
copying pulsectl/__init__.py -> build/lib/pulsectl
copying pulsectl/pulsectl.py -> build/lib/pulsectl
copying pulsectl/_pulsectl.py -> build/lib/pulsectl
copying pulsectl/lookup.py -> build/lib/pulsectl
creating build/lib/pulsectl/tests
copying pulsectl/tests/test_with_dummy_instance.py -> build/lib/pulsectl/tests
copying pulsectl/tests/__init__.py -> build/lib/pulsectl/tests
running egg_info
writing pulsectl.egg-info/PKG-INFO
writing dependency_links to pulsectl.egg-info/dependency_links.txt
writing top-level names to pulsectl.egg-info/top_level.txt
reading manifest file 'pulsectl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'COPYING'
writing manifest file 'pulsectl.egg-info/SOURCES.txt'
==> Entering fakeroot environment...
==> Starting package()...
running install
running install_lib
creating /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr
creating /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib
creating /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9
creating /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages
creating /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl
creating /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/tests
copying build/lib/pulsectl/tests/test_with_dummy_instance.py -> /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/tests
copying build/lib/pulsectl/tests/__init__.py -> /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/tests
copying build/lib/pulsectl/__init__.py -> /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl
copying build/lib/pulsectl/pulsectl.py -> /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl
copying build/lib/pulsectl/_pulsectl.py -> /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl
copying build/lib/pulsectl/lookup.py -> /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl
byte-compiling /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/tests/test_with_dummy_instance.py to test_with_dummy_instance.cpython-39.pyc
byte-compiling /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/tests/__init__.py to __init__.cpython-39.pyc
byte-compiling /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/__init__.py to __init__.cpython-39.pyc
byte-compiling /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/pulsectl.py to pulsectl.cpython-39.pyc
byte-compiling /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/_pulsectl.py to _pulsectl.cpython-39.pyc
byte-compiling /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl/lookup.py to lookup.cpython-39.pyc
writing byte-compilation script '/tmp/tmpet96i4z6.py'
/usr/bin/python /tmp/tmpet96i4z6.py
removing /tmp/tmpet96i4z6.py
running install_egg_info
running egg_info
writing pulsectl.egg-info/PKG-INFO
writing dependency_links to pulsectl.egg-info/dependency_links.txt
writing top-level names to pulsectl.egg-info/top_level.txt
reading manifest file 'pulsectl.egg-info/SOURCES.txt'
reading manifest template 'MANIFEST.in'
adding license file 'COPYING'
writing manifest file 'pulsectl.egg-info/SOURCES.txt'
Copying pulsectl.egg-info to /home/scott/.cache/yay/python-pulsectl/pkg/python-pulsectl/usr/lib/python3.9/site-packages/pulsectl-21.9.1-py3.9.egg-info
running install_scripts
==> Tidying install...
-> Removing libtool files...
-> Purging unwanted files...
-> Removing static library files...
-> Stripping unneeded symbols from binaries and libraries...
-> Compressing man and info pages...
==> Checking for packaging issues...
==> Creating package "python-pulsectl"...
-> Generating .PKGINFO file...
-> Generating .BUILDINFO file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: python-pulsectl 1:21.9.1-1 (Fri 10 Sep 2021 01:52:32 PM CDT)
==> Cleaning up...
loading packages...
resolving dependencies...
looking for conflicting packages...
Package (1) Old Version New Version Net Change
python-pulsectl 1:21.5.18-1 1:21.9.1-1 0.00 MiB
Total Installed Size: 0.29 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [-----------------------] 100%
(1/1) checking package integrity [-----------------------] 100%
(1/1) loading package files [-----------------------] 100%
(1/1) checking for file conflicts [-----------------------] 100%
(1/1) checking available disk space [-----------------------] 100%
:: Processing package changes...
(1/1) upgrading python-pulsectl [-----------------------] 100%
:: Running post-transaction hooks...
(1/1) Arming ConditionNeedsUpdate...
