Hi, I’m new to this os. In my setup I ran into the trouble of nvidia-smi No devices were found even though I installed EndeavourOS with the nvidia setup, running nvidia-inst, using pacman -S nvidia. I’ve looked around for a week and tried quite a lot before writing this. Other thing I tried was u…

[image] Is RTX 5070ti supported by EOS installer? Kernel, boot, graphics & hardware Hi, I got this card and would love to run EOS with it. But few weeks ago, I couldn’t get it to work. I couldn’t even get on the graphical login screen, it hanged. I could open tty2 etc. but…

[image] Paradon: Graphics: Device-1: Intel Raptor Lake-S UHD Graphics vendor: Lenovo driver: i915 v: kernel arch: Xe ports: active: eDP-1 empty: DP-1,HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:a788 Device-2: NVIDIA GB206M [GeForce RTX 5070 Max-Q / Mobile] vendor: Lenovo driver: nvidi…

In my Legion 5, you have to switch to the dGPU in the bios screen, otherwise it uses the iGPU (in my case AMD). Sort of like this (picture from web): [image] Graphics: Device-1: NVIDIA GA104M [GeForce RTX 3070 Mobile / Max-Q] driver: nvidia v: 575.64.03 Device-2: Bison Integrated Camera d…

[image] cscs: Switching is normally handled via PRIME. Is prime installed by default? :face_with_monocle:

Its impossible to know if its there or not given the anecdote above .. it sounded like they installed a bunch of different nvidia+switching things. Obviously I leaned in to ‘installed’ .. but we will know soon enough ..

Already tried that, it’s supposed to be with the option Discrete Graphics option, but like I said, the result was being stuck in boot with the last line “Reached target Graphical Interface”.

it’s not. and the result of glxinfo | grep 'renderer stringwas: OpenGL renderer string: Mesa Intel(R) Graphics (RPL-S)

I think you need the noveau drivers for this card, not the standard drivers, this is from memory (and at my age!), let me search.

[image] Paradon: it’s not. Well .. it is. It requires no extra packages to function (DRI_PRIME=1). But normal PRIME only works when all the drivers involved are open. If you mean prime-run .. then its in package nvidia-prime.

[image] cscs: prime-run glxinfo | grep 'renderer string' prime-run glxinfo | grep ‘renderer string’ returns X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 150 (GLX) Minor opcode of failed request: 24 (X_GLXCreateNewCo…

Okay, this worked, but now in the about system I see my dGPU as 2 graphic processors. I also get nvidia-smi: +-----------------------------------------------------------------------------------------+ | NVIDIA-SMI 575.64.03 Driver Version: 575.64.03 CUDA Version: 12.9 | |-----…

Troubles with nvidia GPU

General system Newbie

xircon July 6, 2025, 8:32pm 10

Install noveau, reboot and change to dGPU.