# SWAY first install always ends in black screen; no TTY

**URL:** <https://forum.endeavouros.com/t/sway-first-install-always-ends-in-black-screen-no-tty/15636>\
**Category:** EndeavourOS installation\
**Created:** [July 4, 2021, 9:08am UTC](https://forum.endeavouros.com/t/sway-first-install-always-ends-in-black-screen-no-tty/15636 "2021-07-04T09:08:10Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ondrish](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/o/b19c9b/32.png) [@ondrish](https://forum.endeavouros.com/u/ondrish)\
**Post date:** [July 4, 2021, 9:08am UTC](https://forum.endeavouros.com/t/sway-first-install-always-ends-in-black-screen-no-tty/15636/1 "2021-07-04T09:08:10Z")

</div>

Hello everyone,

Could somebody pls help me finding out, why is my installation of the Sway Community edition always fails?

My install steps:  
booted into live env from USB  
updated mirrors using the welcome app  
selected sway edition and then more or less just followed with default options, adding just zen kernel

my hdd layout is 555MB for EFI/GRUB ,60GB “/” volume on NVME drive, then 500GB “/home” volume on a normal HDD. No swap or other stuff

Installation passes without any errors visible in the terminal (terminal window is opened and stays open for the installation duration after sway is selected)  
once install completes, I reboot and i get a black screen with a blinking text cursor but I cant even open a terminal session using ALT, SHIFT with F2 or any modifier keys with any function key in that matter.

My hw is ryzen 9 5900, radeon RX6900xt but I doubt that is relevant at this point.

Any tips or advice would be greatly appreciated 🙂

---

<div class="post-metadata">

**Author:** ![ondrish](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/o/b19c9b/32.png) [@ondrish](https://forum.endeavouros.com/u/ondrish)\
**Post date:** [July 4, 2021, 9:09am UTC](https://forum.endeavouros.com/t/sway-first-install-always-ends-in-black-screen-no-tty/15636/2 "2021-07-04T09:09:17Z")

</div>

Also to add, I downloaded the installer a maybe a month ago, I had these problems back then.  
Yesterday I re-downloaded the ISO from torrent, so shouldn’t be corrupted and tried again, but still same results.

---

<div class="post-metadata">

**Author:** ![jonathon](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/jonathon/32/18722_2.png) [@jonathon](https://forum.endeavouros.com/u/jonathon)\
**Post date:** [July 5, 2021, 12:19am UTC](https://forum.endeavouros.com/t/sway-first-install-always-ends-in-black-screen-no-tty/15636/3 "2021-07-05T00:19:10Z")

</div>

> [@ondrish](#):
>
> I reboot and i get a black screen with a blinking text cursor

> [@\[FAQ\] Computer doesn’t boot, boots to a black screen, or stops at a message](https://forum.endeavouros.com/t/faq-computer-doesn-t-boot-boots-to-a-black-screen-or-stops-at-a-message/6887):
>
> While there are many potential reasons why your installation doesn’t boot to a desktop, the primary reason is that the graphics drivers haven’t loaded correctly so your login/display manager (DM) doesn’t start. This is why you get a “black screen” or stuck at an [OK] Started some service message. The normal reason for this is that you have the incorrect driver version for the kernel. This can happens when the mirror you are updating from is not fully synchronised, or times out, and so y…

> [@ondrish](#):
>
> My hw is ryzen 9 5900, radeon RX6900xt but I doubt that is relevant

Graphics hardware not being relevant to an apparent graphics driver issue? Whatever next! 😂

---

<div class="post-metadata">

**Author:** ![Dev0ut](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dev0ut/32/30360_2.png) [@Dev0ut](https://forum.endeavouros.com/u/Dev0ut)\
**Post date:** [July 5, 2021, 12:49am UTC](https://forum.endeavouros.com/t/sway-first-install-always-ends-in-black-screen-no-tty/15636/4 "2021-07-05T00:49:41Z")

</div>

1. Try to manually setup the screen resolution [https://github.com/swaywm/sway/wiki#display-configuration](https://github.com/swaywm/sway/wiki#display-configuration)
2. You can try to boot with linux lts kernel

---

<div class="post-metadata">

**Author:** ![jonathon](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/jonathon/32/18722_2.png) [@jonathon](https://forum.endeavouros.com/u/jonathon)\
**Post date:** [July 5, 2021, 10:18am UTC](https://forum.endeavouros.com/t/sway-first-install-always-ends-in-black-screen-no-tty/15636/5 "2021-07-05T10:18:57Z")

</div>

> [@Dev0ut](#):
>
> try to boot with linux lts kernel

It might be worth trying different kernels, though I suspect a newer kernel will be required for the OP’s

> [@ondrish](#):
>
> radeon RX6900xt
