My speakers are not working

I am testing EndeavourOS (I have not installed it yet), so I go play music in youtube and I cannot hear anything.
I think the audio should work before installing EOS but I’m not sure, I’m a newbie.

inxi -FAZ --no-host | eos-sendlog

System:
Kernel: 5.15.8-arch1-1 x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: initrd=\arch\boot\intel-ucode.img
initrd=\arch\boot\amd-ucode.img
initrd=\arch\boot\x86_64\initramfs-linux.img archisobasedir=arch
archisolabel=EOS_202112 cow_spacesize=10G
module_blacklist=nvidia,nvidia_modeset,nvidia_uvm,nvidia_drm
nouveau.modeset=1 i915.modeset=1 radeon.modeset=1 nvme_load=yes
Desktop: Xfce 4.16.0 tk: Gtk 3.24.29 info: xfce4-panel wm: xfwm 4.16.1
vt: 1 dm: LightDM 1.30.0 Distro: EndeavourOS base: Arch Linux
Machine:
Type: Laptop System: HP product: HP Pavilion Laptop 15-cw0xxx v: N/A
serial: Chassis: type: 10 serial:
Mobo: HP model: 84E7 v: 99.22 serial: UEFI: AMI
v: F.35 date: 09/24/2019
Battery:
ID-1: BAT0 charge: 31.8 Wh (88.6%) condition: 35.9/35.9 Wh (100.0%)
volts: 13.2 min: 11.6 model: Hewlett-Packard Primary type: Li-ion
serial: N/A status: Charging cycles: 322
CPU:
Info: model: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx bits: 64
type: MT MCP arch: Zen family: 0x17 (23) model-id: 0x11 (17) stepping: 0
microcode: 0x810100B
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB
L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1549 high: 2158 min/max: 1600/2000 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1397 2: 1396
3: 2158 4: 1565 5: 1443 6: 1376 7: 1464 8: 1596 bogomips: 31949
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]
vendor: Hewlett-Packard driver: amdgpu v: kernel bus-ID: 03:00.0
chip-ID: 1002:15dd class-ID: 0300
Device-2: Lite-On HP Wide Vision HD Camera type: USB driver: uvcvideo
bus-ID: 3-1.2:3 chip-ID: 04ca:707f class-ID: 0e02 serial:
Display: server: X.Org 1.21.1.2 compositor: xfwm4 v: 4.16.1 driver:
loaded: amdgpu,ati unloaded: modesetting,radeon alternate: fbdev,vesa
display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: eDP res: 1366x768 hz: 60 dpi: 101 size: 344x194mm (13.5x7.6")
diag: 395mm (15.5")
OpenGL: renderer: AMD Radeon Vega 8 Graphics (RAVEN DRM 3.42.0
5.15.8-arch1-1 LLVM 13.0.0)
v: 4.6 Mesa 21.3.1 direct render: Yes
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 03:00.1 chip-ID: 1002:15de
class-ID: 0403
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
driver: snd_pci_acp3x v: kernel alternate: snd_rn_pci_acp3x,snd_pci_acp5x
bus-ID: 03:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 03:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound Server-1: ALSA v: k5.15.8-arch1-1 running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.42 running: yes
Network:
Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8821ce v: N/A modules: rtw88_8821ce,wl
port: f000 bus-ID: 01:00.0 chip-ID: 10ec:c821 class-ID: 0280
IF: wlan0 state: up mac:
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: e000 bus-ID: 02:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac:
Bluetooth:
Device-1: Realtek Realtek Bluetooth 4.2 Adapter type: USB driver: btusb
v: 0.8 bus-ID: 1-4:3 chip-ID: 0bda:b00a class-ID: e001 serial:
Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found
rfk-block: hardware: no software: no address: see --recommends
Drives:
Local Storage: total: 1.04 TiB used: 0 KiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10SPZX-60Z10T0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial:
rev: 1A04 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Samsung model: MZNLN128HAHQ-000H1
size: 119.24 GiB block-size: physical: 4096 B logical: 512 B
speed: 6.0 Gb/s type: SSD serial: rev: 4H3Q scheme: GPT
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Kingston
model: DataTraveler 2.0 size: 14.45 GiB block-size: physical: 512 B
logical: 512 B type: N/A serial: rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: N/A size: 10 GiB used: 119.1 MiB (1.2%) fs: overlay
source: ERR-102
Swap:
Alert: No swap data was found.
Sensors:
System Temperatures: cpu: 61.0 C mobo: N/A gpu: amdgpu temp: 69.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 232 Uptime: 14m wakeups: 1 Memory: 10.7 GiB
used: 2.17 GiB (20.3%) Init: systemd v: 249 target: multi-user.target
tool: systemctl Compilers: gcc: 11.1.0 Packages: pacman: 888 lib: 208
Shell: Bash v: 5.1.12 running-in: xfce4-terminal inxi: 3.3.10

You have three audio devices so check which one is being used as the default; there will be audio settings available in Xfce, or you can install and run pavucontrol for potentially more control.

I only see 2 in the Volume Control and I’ve tried both and changed their profiles but there’s no sound.