Hi,
weird thing after a fresh install from EOS Mercury ISO:
Device is a Minisforum V3 Tablet with attached Keyboard & Touchpad.
The system reports a Mouse attached although there is none. During boot I see this
[jens@MV3 ~]$ sudo dmesg | grep -i mouse
[ 1.453180] input: PNP0C50:00 222A:550D Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-PNP0C50:00/0018:222A:550D.0001/input/input7
[ 1.453237] hid-generic 0018:222A:550D.0001: input,hidraw0: I2C HID v1.00 Mouse [PNP0C50:00 222A:550D] on i2c-PNP0C50:00
[ 1.576600] input: PNP0C50:00 222A:550D Mouse as /devices/platform/AMDI0010:00/i2c-0/i2c-PNP0C50:00/0018:222A:550D.0001/input/input13
[ 1.576660] hid-multitouch 0018:222A:550D.0001: input,hidraw0: I2C HID v1.00 Mouse [PNP0C50:00 222A:550D] on i2c-PNP0C50:00
[ 1.960788] input: USB Keyboard Mouse as /devices/pci0000:00/0000:00:08.1/0000:c4:00.3/usb1/1-2/1-2:1.1/0003:05AF:326A.0003/input/input15
[ 2.014053] hid-multitouch 0003:05AF:326A.0003: input,hiddev96,hidraw2: USB HID v1.11 Mouse [USB Keyboard] on usb-0000:c4:00.3-2/input1
[ 3.661451] mousedev: PS/2 mouse device common for all mice
actual USB devices are Mic, Keyboard (+touchpad), Fingerprint and Webcam
[jens@MV3 ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1bcf:2ce4 Sunplus Innovation Technology Inc. Hy-Usb2.0-1*MIC
Bus 001 Device 003: ID 05af:326a Jing-Mold Enterprise Co., Ltd USB Keyboard
Bus 001 Device 004: ID 27c6:6092 Shenzhen Goodix Technology Co.,Ltd. Goodix USB2.0 MISC
Bus 001 Device 006: ID 8087:0032 Intel Corp. AX210 Bluetooth
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 2b7e:c705 Kingcome USB2.0 FHD UVC WebCam
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
and KDE control panel reports a mouse as available. And then disables the touchpad. (yes, this behavior can be turned off but that’s not the point)
I rebooted into the EOS LiveCD again and there is no mouse.
Any ideas why this happens and how to prevent it?
I had a EOS install on the same device before and back then it would behave like the LiveCD: no mouse
thanks