Last update broke i915 driver

please look the video. If I try TTY* the login appear for a very short time and after disappear…
I have to study how to change the resolution by GRUB but… why all these problems after a simple package upgrade?

Looks like you’re on the latest kernel. Same results on the lts?

Same result… I have no answer… The live version works perfectly…

I am going to reinstall…

Leave out the Intel driver and see if your results don’t improve. You’ve got a 7th Gen. Intel. the x86 driver is not needed in Arch and has been known to cause errors for several years. The driver is only necessary of earlier (3rd Gen?) Intel.

I would like to inform again the thread-readers that the live version (booted from USB dongle) had not problem.
I resolved the problem by using Manjaro on this computer.

My old MacMini 5,2 work perfectly with EndevourOS… the big question is which Arch-based distribution use…

I hope this is last time I have to reinstall the OS.

By the way, this computer is my first one running EndeavourOS, and I installed EndeavourOS after a Manjaro catastrophic upgrade…

Thanks to all the team a lot for the support.

Regards
MR

Perhaps a solution was to add

GRUB_CMDLINE_LINUX="nomodeset"

For complete information, Manjaro is broken, and the video driver since today is faulty!!!

It could be a hardware failure too…

It is listed as working:

edit:
its gen 3 ? so not latest and will need intel driver package and may also mesa-amber

I believe in collaboration between groups. I switched to Majaro, and the problem is resolved.
I will be glad to provide all the requested information to investigate the problem.

I usually perform some hardware list, this is the one of the computer (I have more detailed reports):

CPU: Intel i3-3220 (4) @ 3.300GHz
GPU: Intel HD Graphics

the output from inxi would be interesting and involved packages MJ has in use:
mesa and xf86-video-intel plus kernel version and if it adds kernel options:
journalctl -b -0 | sed 2q

journalctl -b -0 | sed 2q
set 15 13:52:35 albanuova kernel: microcode: microcode updated early to revision 0x21, date = 2019-02-13
set 15 13:52:35 albanuova kernel: Linux version 5.15.65-1-MANJARO (builduser@fv-az183-516) (gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0) #1 SMP PREEMPT Mon Sep 5 10:15:47 UTC 2022
$inxi  -G
Graphics:
  Device-1: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics
    driver: i915 v: kernel
  Device-2: Logitech Webcam C120 type: USB driver: uvcvideo
  Display: server: X.org v: 1.21.1.4 with: Xwayland v: 22.1.3 driver: X:
    loaded: modesetting gpu: i915 resolution: 1: 1360x768 2: 1440x900
  Message: No GL data found on this system.
egrep -i " connected|card detect|primary dev|Setting driver" /var/log/Xorg.0.log
[     5.556] (II) modeset(0): Output VGA-1 connected
[     5.556] (II) modeset(0): Output HDMI-2 connected
sudo lspci -vnn | grep -i VGA -A 12

00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0152] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device [103c:3398]
	Flags: bus master, fast devsel, latency 0, IRQ 28
	Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
	Memory at e0000000 (64-bit, prefetchable) [size=256M]
	I/O ports at f000 [size=64]
	Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Capabilities: [d0] Power Management version 2
	Capabilities: [a4] PCI Advanced Features
	Kernel driver in use: i915
	Kernel modules: i915

If I have to execute other commands… please suggest them.

1 Like

so somehow LTS kernel
And is xf86-video-intel installed?
the version of mesa would be also interesting.

And thanks for the info!

pacman -Ss xf86 |grep installed
extra/libxxf86vm 1.1.4-5 [installed]
extra/xf86-input-elographics 1.4.2-3 [installed]
extra/xf86-input-evdev 2.10.6-3 (xorg-drivers) [installed]
extra/xf86-input-libinput 1.2.1-1 (xorg-drivers) [installed]
extra/xf86-input-void 1.4.1-6 (xorg-drivers) [installed]
extra/xf86-video-amdgpu 22.0.0-1 (xorg-drivers) [installed]
extra/xf86-video-ati 1:19.1.0.r15.g7a6a34af-1 (xorg-drivers) [installed]
extra/xf86-video-intel 1:2.99.917+916+g31486f40-2 (xorg-drivers) [installed]
extra/xf86-video-nouveau 1.0.17-2 (xorg-drivers) [installed]
multilib/lib32-libxxf86vm 1.1.4-3 [installed]
pacman -Ss mesa |grep installed
extra/glu 9.0.2-3 [installed]
extra/libva-mesa-driver 22.1.7-1 [installed]
extra/mesa 22.1.7-1 [installed]
extra/mesa-demos 8.5.0-2 [installed]
extra/mesa-utils 8.5.0-2 [installed]
extra/mesa-vdpau 22.1.7-1 [installed]
extra/vulkan-intel 22.1.7-1 [installed]
extra/vulkan-radeon 22.1.7-1 [installed]
multilib/lib32-glu 9.0.2-3 [installed]
multilib/lib32-libva-mesa-driver 22.1.7-1 [installed]
multilib/lib32-mesa 22.1.7-1 [installed]
multilib/lib32-mesa-demos 8.5.0-1 [installed]
multilib/lib32-mesa-vdpau 22.1.7-1 [installed]
multilib/lib32-vulkan-intel 22.1.7-1 [installed]
multilib/lib32-vulkan-radeon 22.1.7-1 [installed]

Same versions… so only kernel is different :wink: but i do n to know if MJ is patching mesa p.e.
so need to check what MJ is doing different…
and having all this package installed is looking strange to me personally… its like installing all drivers possible?