Hi all,
I installed KDE Eos. Everything is fine except the next :
- need to re-enter Wifi password after every boot/restart
- can not adjust volume with F keys or mute
Thanks 
Would that work for the pwd issue?
1 Like
Thanks, it is working now
Mark it solved.
Which hardware do you have, if it is a Thinkpad, you have to deselect the fn keys to be able to work with those functions?
Otherwise, you can set those keys in the system settings, with some systems you have to select the keys manually to function properly.
Hm, I don’t have those option.
My hardware :
> System:
> Kernel: 5.14.16-arch1-1 x86_64 bits: 64 compiler: gcc v: 11.1.0
> parameters: BOOT_IMAGE=/boot/vmlinuz-linux
> root=UUID=81d0cb82-9a18-41e0-b127-90aca7f97b38 rw quiet loglevel=3
> nowatchdog
> Desktop: KDE Plasma 5.23.2 tk: Qt 5.15.2 wm: kwin_x11 vt: 1 dm: SDDM
> Distro: EndeavourOS base: Arch Linux
> Machine:
> Type: Convertible System: HP product: HP ENVY x360 Convertible 13-ar0xxx
> v: N/A serial: <filter> Chassis: type: 31 serial: <filter>
> Mobo: HP model: 85DE v: 41.36 serial: <filter> UEFI: AMI v: F.23
> date: 02/05/2021
> Battery:
> ID-1: BAT0 charge: 48.5 Wh (100.0%) condition: 48.5/48.5 Wh (100.0%)
> volts: 17.5 min: 15.4 model: 333-2B-49-A KC04053XL type: Li-ion
> serial: <filter> status: Full
> Device-1: hid-0018:04F3:23B9.0001-battery model: ELAN2514:00 04F3:23B9
> serial: N/A charge: N/A status: N/A
> Memory:
> RAM: total: 5.67 GiB used: 2.08 GiB (36.6%)
> RAM Report: permissions: Unable to run dmidecode. Root privileges required.
> CPU:
> Info: Quad Core model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx
> bits: 64 type: MT MCP arch: Zen family: 17 (23) model-id: 18 (24)
> stepping: 1 microcode: 8108109 cache: L2: 2 MiB bogomips: 33550
> Speed: 1222 MHz min/max: 1400/2100 MHz boost: enabled Core speeds (MHz):
> 1: 1222 2: 1223 3: 1224 4: 1223 5: 1224 6: 1219 7: 1679 8: 1253
> Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1
> bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb cpuid
> cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c flushbyasid
> fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf lahf_lm lbrv lm mca
> mce misalignsse mmx mmxext monitor movbe msr mtrr mwaitx nonstop_tsc nopl
> npt nrip_save nx osvw overflow_recov pae pat pausefilter pclmulqdq pdpe1gb
> perfctr_core perfctr_llc perfctr_nb pfthreshold pge pni popcnt pse pse36
> rapl rdrand rdseed rdtscp rep_good sep sev sev_es sha_ni skinit smap smca
> sme smep ssbd sse sse2 sse4_1 sse4_2 sse4a ssse3 succor svm svm_lock syscall
> tce topoext tsc tsc_scale v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt
> xgetbv1 xsave xsavec xsaveerptr xsaveopt xsaves
> Vulnerabilities: Type: itlb_multihit status: Not affected
> Type: l1tf status: Not affected
> Type: mds status: Not affected
> Type: meltdown status: Not affected
> Type: spec_store_bypass
> mitigation: Speculative Store Bypass disabled via prctl and seccomp
> Type: spectre_v1
> mitigation: usercopy/swapgs barriers and __user pointer sanitization
> Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:
> disabled, RSB filling
> Type: srbds status: Not affected
> Type: tsx_async_abort status: Not affected
> Graphics:
> Device-1: AMD Picasso vendor: Hewlett-Packard driver: amdgpu v: kernel
> bus-ID: 04:00.0 chip-ID: 1002:15d8 class-ID: 0300
> Device-2: Lite-On HP Wide Vision HD Camera type: USB driver: uvcvideo
> bus-ID: 3-1:2 chip-ID: 04ca:709d class-ID: 0e02
> Display: x11 server: X.org 1.20.13 compositor: kwin_x11 driver:
> loaded: amdgpu unloaded: fbdev,modesetting,vesa alternate: ati
> resolution: <missing: xdpyinfo>
> Message: Unable to show advanced data. Required tool glxinfo missing.
> Audio:
> Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Hewlett-Packard
> driver: snd_hda_intel v: kernel bus-ID: 04:00.1 chip-ID: 1002:15de
> class-ID: 0403
> Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
> vendor: Hewlett-Packard driver: snd_pci_acp3x v: kernel
> alternate: snd_rn_pci_acp3x bus-ID: 04:00.5 chip-ID: 1022:15e2
> class-ID: 0480
> Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard
> driver: snd_hda_intel v: kernel bus-ID: 04:00.6 chip-ID: 1022:15e3
> class-ID: 0403
> Sound Server-1: ALSA v: k5.14.16-arch1-1 running: yes
> Sound Server-2: JACK v: 1.9.19 running: no
> Sound Server-3: PulseAudio v: 15.0 running: yes
> Sound Server-4: PipeWire v: 0.3.39 running: no
> Network:
> Device-1: Realtek RTL8822BE 802.11a/b/g/n/ac WiFi adapter
> vendor: Hewlett-Packard driver: rtw_8822be v: N/A modules: rtw88_8822be
> port: f000 bus-ID: 02:00.0 chip-ID: 10ec:b822 class-ID: 0280
> IF: wlo1 state: up mac: <filter>
> IP v4: <filter> type: dynamic noprefixroute scope: global
> broadcast: <filter>
> IP v6: <filter> type: dynamic noprefixroute scope: global
> IP v6: <filter> type: dynamic noprefixroute scope: global
> IP v6: <filter> type: noprefixroute scope: link
> WAN IP: <filter>
> Bluetooth:
> Device-1: Realtek Realtek Bluetooth 4.2 Adapter type: USB driver: btusb
> v: 0.8 bus-ID: 3-2:3 chip-ID: 0bda:b00b class-ID: e001 serial: <filter>
> Report: rfkill ID: hci0 rfk-id: 1 state: down bt-service: disabled
> rfk-block: hardware: no software: no address: see --recommends
> Logical:
> Message: No logical block device data found.
> RAID:
> Message: No RAID data found.
> Drives:
> Local Storage: total: 476.94 GiB used: 27.84 GiB (5.8%)
> SMART Message: Unable to run smartctl. Root privileges required.
> ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Intel model: SSDPEKNW512G8H
> size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
> lanes: 4 type: SSD serial: <filter> rev: HPS0 temp: 26.9 C scheme: GPT
> Message: No optical or floppy data found.
> Partition:
> ID-1: / raw-size: 203 GiB size: 198.75 GiB (97.91%) used: 14.54 GiB (7.3%)
> fs: ext4 dev: /dev/nvme0n1p2 maj-min: 259:2 label: N/A
> uuid: 81d0cb82-9a18-41e0-b127-90aca7f97b38
> ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
> used: 296 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1 label: N/A
> uuid: 1EBB-4AF0
> ID-3: /home raw-size: 273.44 GiB size: 268.08 GiB (98.04%)
> used: 13.29 GiB (5.0%) fs: ext4 dev: /dev/nvme0n1p3 maj-min: 259:3
> label: N/A uuid: 147ecabf-b62d-460f-878b-91c0cf8ae23c
> Swap:
> Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
> ID-1: swap-1 type: file size: 8 GiB used: 0 KiB (0.0%) priority: -2
> file: /swapfile
> Unmounted:
> Message: No unmounted partitions found.
> USB:
> Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0
> speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
> Device-1: 1-3:2
> info: SHARKOON 2.4GHz Wireless rechargeable vertical mouse [More&Better]
> type: Mouse driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s
> power: 100mA chip-ID: 1ea7:0064 class-ID: 0301
> Device-2: 1-4:3 info: Synaptics type: <vendor specific> driver: N/A
> interfaces: 1 rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 06cb:00d2
> class-ID: ff00 serial: <filter>
> Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s
> chip-ID: 1d6b:0003 class-ID: 0900
> Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0
> speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
> Device-1: 3-1:2 info: Lite-On HP Wide Vision HD Camera type: Video
> driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA
> chip-ID: 04ca:709d class-ID: 0e02
> Device-2: 3-2:3 info: Realtek Realtek Bluetooth 4.2 Adapter type: Bluetooth
> driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s power: 500mA
> chip-ID: 0bda:b00b class-ID: e001 serial: <filter>
> Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.1 speed: 10 Gb/s
> chip-ID: 1d6b:0003 class-ID: 0900
> Sensors:
> System Temperatures: cpu: 46.5 C mobo: 38.0 C gpu: amdgpu temp: 46.0 C
> Fan Speeds (RPM): N/A
> Info:
> Processes: 225 Uptime: 39m wakeups: 216 Init: systemd v: 249 tool: systemctl
> Compilers: gcc: 11.1.0 Packages: pacman: 831 lib: 244 Shell: Bash v: 5.1.8
> running-in: konsole inxi: 3.3.07
P.S.
I found it in system settings, tried to add them manually but nothing happened when I press F key.
You don’t have to press the Fn key for those, only when you need the F1, F2 etc. specifically.
EDIT: discard my answer, I misread your reply.
1 Like
Only on Windows I need to press FN key with F2 etc. On linux just F2 works.
Atm F2,F3 working fine ( brightness keys). F5 keyboard light also. But F6 (mute), F7, F8 for volume adjustment don’t work.
Even in settings I manually added F7 for volume down ( it was there F7) but nothing changed when I press them.
To get that out of the way, did you install any additional audio related software after the main install?
And can you hear any sound at all besides keyboard issue?
1 Like
First no and for sound it is working normally
Apparently it’s a hp thing, in arch wiki it says you simply remap the keys manually.
1 Like
But this is first time I had issues with volume keys… on previous install of Endeavour os no issues at all
I will check this btw thanks
Some info also on Manjaro forum, similar issue? But other f buttons.
1 Like
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.