# GLibC error after update - can't boot

**URL:** <https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158>\
**Category:** Kernel, boot, graphics & hardware\
**Created:** [February 15, 2022, 6:19pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158 "2022-02-15T18:19:42Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 15, 2022, 6:19pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/1 "2022-02-15T18:19:42Z")

</div>

Hey all! 🙂

After updating yesterday and cleaning up my laptop from DEs I wasn’t using and cleaning pacman cache after this, I can’t boot into the system anymore.

When turning on I see the EOS splash screen, and whether I choose normal boot or fallback boot entry I end up here.

![PXL_20220214_234127649](https://forum.endeavouros.com/uploads/default/original/3X/a/c/accf9db7785fc93c2127bfa74e86fde9af6eda1b.jpeg)

I don’t know how to proceed to fix especially as it seems the laptop doesn’t read any of my keyboard usage as you can see here: [https://streamja.com/pMMG6](https://streamja.com/pMMG6)

Secure boot is disabled.

If I try to get into grub by pressing ESC after pressing F12 while booting to get into boot image selection it crashes immediately and goes straight to the EOS splash screen, and then to the error above.

---

<div class="post-metadata">

**Author:** ![jonathon](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/jonathon/32/18722_2.png) [@jonathon](https://forum.endeavouros.com/u/jonathon)\
**Post date:** [February 15, 2022, 8:10pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/2 "2022-02-15T20:10:30Z")

</div>

Looks like you did a partial upgrade, so you can recover using a chroot,

> **[Fix Arch Linux Boot with arch-chroot](https://discovery.endeavouros.com/video-tutorials/fix-arch-linux-boot-with-arch-chroot/2021/12/)**
>
> Visit the post for more.

Once you can access the installation you can fully update it.

---

<div class="post-metadata">

**Author:** ![joekamprad](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/joekamprad/32/77608_2.png) [@joekamprad](https://forum.endeavouros.com/u/joekamprad)\
**Post date:** [February 15, 2022, 8:20pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/3 "2022-02-15T20:20:53Z")

</div>

I would see it exactly like @jonathon … partly updated system.  
No way (no easy way) to boot directly into system. So arch-chroot is your way to get packages at the same level updated…

```auto

local/glibc 2.35-2
    GNU C Library

```

Is the current version… and it searches for 3.34 on your system so would be Glibc is updated but some other parts not fitting it…

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 1:50am UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/4 "2022-02-16T01:50:49Z")

</div>

I chroot into the system from a base Arch USB. Ran sudo pacman -Syyu, had a few updates, then exited chroot. Shutdown, booted and same error. Maybe I need to downgrade GLibC or something like that?

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 1:51am UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/5 "2022-02-16T01:51:33Z")

</div>

System is fully updated. Not sure which parts are not fitting in, should I try to downgrade this GLibC package?

---

<div class="post-metadata">

**Author:** ![jonathon](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/jonathon/32/18722_2.png) [@jonathon](https://forum.endeavouros.com/u/jonathon)\
**Post date:** [February 16, 2022, 2:02am UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/6 "2022-02-16T02:02:04Z")

</div>

> [@Fra](#):
>
> should I try to downgrade this GLibC package?

That won’t help, it will just make the system even more partially updated.

> [@Fra](#):
>
> System is fully updated

The error messages you posted disagree.

Have you held back any packages in `/etc/pacman.conf`’s `IgnorePkg` ?

Have you refreshed your mirror list to make sure you’re using an up-to-date mirror?

---

<div class="post-metadata">

**Author:** ![joekamprad](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/joekamprad/32/77608_2.png) [@joekamprad](https://forum.endeavouros.com/u/joekamprad)\
**Post date:** [February 16, 2022, 8:43am UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/7 "2022-02-16T08:43:02Z")

</div>

do you rebuilded kernel images? `mkinitcpio -P` in the chroot?

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 12:36pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/8 "2022-02-16T12:36:48Z")

</div>

No package in the ignore list.

I updated mirrors and updated system, now I don’t get that error anymore but just a blank black screen and a blinking cursor in the top left corner of the screen with no information whatsoever.

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 12:38pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/9 "2022-02-16T12:38:44Z")

</div>

I didn’t before, did this time and this was the output  
 ![IMG_20220216_123747_665](https://forum.endeavouros.com/uploads/default/original/3X/7/6/76757a7e9b9b4f38840835839561320a7e395fea.jpeg)

Now I don’t get the GLibC error, but just a blank black screen with a blinking cursor and no other information.

![PXL_20220216_123725751](https://forum.endeavouros.com/uploads/default/original/3X/3/1/312637eae45e34477a91add49faa29d124e14b3d.jpeg)

---

<div class="post-metadata">

**Author:** ![Zircon34](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/zircon34/32/135623_2.png) [@Zircon34](https://forum.endeavouros.com/u/Zircon34)\
**Post date:** [February 16, 2022, 1:36pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/10 "2022-02-16T13:36:01Z")

</div>

> [@Fra](#):
>
> After updating yesterday and cleaning up my laptop from DEs

The update seem to have worked. The firmware error messages are also on my computer and should not be the problem I think.

What did you mean by cleaning up your DE in your OP?

---

<div class="post-metadata">

**Author:** ![jonathon](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/jonathon/32/18722_2.png) [@jonathon](https://forum.endeavouros.com/u/jonathon)\
**Post date:** [February 16, 2022, 3:09pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/11 "2022-02-16T15:09:08Z")

</div>

> [@Fra](#):
>
> a blank black screen with a blinking cursor

You can see the boot messages by editing the GRUB boot line (press ‘e’ at the boot prompt) and removing the word `quiet`, then pressing F10 to boot.

> [@\[FAQ\] Computer doesn’t boot, boots to a black screen, or stops at a message](https://forum.endeavouros.com/t/faq-computer-doesn-t-boot-boots-to-a-black-screen-or-stops-at-a-message/6887):
>
> While there are many potential reasons why your installation doesn’t boot to a desktop, the primary reason is that the graphics drivers haven’t loaded correctly so your login/display manager (DM) doesn’t start. This is why you get a “black screen” or stuck at an [OK] Started some service message. The normal reason for this is that you have the incorrect driver version for the kernel. This can happens when the mirror you are updating from is not fully synchronised, or times out, and so y…

Also, this:

> [@Zircon34](#):
>
> What did you mean by cleaning up your DE in your OP?

Did you remove Xorg or your DM or something?

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 3:29pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/12 "2022-02-16T15:29:50Z")

</div>

I had gnome, xfce and i3 installed but have only been using i3 for the past few months so I followed the guide on the EOS website to remove the xfce and gnome desktop. I also used the package lists posted on GitHub to make sure I have all base group packages and all i3 packages.

---

<div class="post-metadata">

**Author:** ![pebcak](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/pebcak/32/100472_2.png) [@pebcak](https://forum.endeavouros.com/u/pebcak)\
**Post date:** [February 16, 2022, 3:35pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/13 "2022-02-16T15:35:34Z")

</div>

I’ve seen in a few threads here in the forum that `lightdm` has been acting up recently so it might be that.

I had a recent install with Cinnamon using lightdm as display manager. It refused to start. Replacing it with `ssdm` worked for me.

Also, _if_ this is the issue in your case, you could look into starting i3wm from TTY with xinit:

[https://wiki.archlinux.org/title/I3wm](https://wiki.archlinux.org/title/I3wm)

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 3:37pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/14 "2022-02-16T15:37:21Z")

</div>

I removed “quiet” and don’t see any error in the grub booting. I followed the guide linked and this was the output  
 ![PXL_20220216_153417792](https://forum.endeavouros.com/uploads/default/original/3X/e/a/eaca519ce2bd25f411692dffc19e096be268f11a.jpeg)

^ running the Dkms

then i ran `startx` and I see this  
 ![PXL_20220216_153458256](https://forum.endeavouros.com/uploads/default/original/3X/4/e/4e8a894e34728c2f41daae89340c2400de22227f.jpeg)

I did probably remove the gnome DM but my i3 was already set to work with light DM iirc

---

<div class="post-metadata">

**Author:** ![pebcak](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/pebcak/32/100472_2.png) [@pebcak](https://forum.endeavouros.com/u/pebcak)\
**Post date:** [February 16, 2022, 3:44pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/15 "2022-02-16T15:44:59Z")

</div>

Check if you have `xorg-xinit` installed. If not install it.  
Put `exec i3` in `~/.xinitrc`.  
Log in from TTY and `startx`.

Hope this helps!

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 4:00pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/16 "2022-02-16T16:00:37Z")

</div>

It was already installed. I copied the config from `/etc/X11/xinit/xinitrc` to `~/.xinitrc` then edited and saved as advised.

![PXL_20220216_155804771](https://forum.endeavouros.com/uploads/default/original/3X/d/b/db43fd73c2da7f299504aaf8045a9fc59a1f85f7.jpeg)

When running startx I see the same exact screen as above with 3 windows opened in a weird placement

I do have Light DM installed

![PXL_20220216_160132098](https://forum.endeavouros.com/uploads/default/original/3X/a/e/ae977af0f746b45363892e137699a75cc126f2e4.jpeg)

and here all packages with starting with x installed

![PXL_20220216_160342145](https://forum.endeavouros.com/uploads/default/original/3X/d/2/d22fa191eda3ec518b8cd8b8505894e014ea0aaf.jpeg)

---

<div class="post-metadata">

**Author:** ![pebcak](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/pebcak/32/100472_2.png) [@pebcak](https://forum.endeavouros.com/u/pebcak)\
**Post date:** [February 16, 2022, 4:08pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/17 "2022-02-16T16:08:07Z")

</div>

Remove the lines 50-54 and try again.

---

<div class="post-metadata">

**Author:** ![Fra](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/fra/32/27926_2.png) [@Fra](https://forum.endeavouros.com/u/Fra)\
**Post date:** [February 16, 2022, 4:13pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/18 "2022-02-16T16:13:56Z")

</div>

It works! Only bummer I have to login every time into tty and do `startx`

Will scout arch wiki on how to fix, any advice?

---

<div class="post-metadata">

**Author:** ![anon53396576](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/a/a698b9/32.png) [@anon53396576](https://forum.endeavouros.com/u/anon53396576)\
**Post date:** [February 16, 2022, 4:18pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/19 "2022-02-16T16:18:09Z")

</div>

This looks like what happens when the installer installs the base but not all the configs get pulled in from github. Something went very wrong with this installation.

---

<div class="post-metadata">

**Author:** ![anon75994754](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/a/d78d45/32.png) [@anon75994754](https://forum.endeavouros.com/u/anon75994754)\
**Post date:** [February 16, 2022, 4:18pm UTC](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158/20 "2022-02-16T16:18:43Z")

</div>

is lightdm enabled ?

[Next page](https://forum.endeavouros.com/t/glibc-error-after-update-cant-boot/24158.md?page=2)
