This is great news! I read through the new driver’s sensor list; while it mentions a couple of detected fans, it does not show chassis fans. Hopefully that will be included.
1 Like
They will probably be included, there is a long way to 6.1 thou…
My motherboard is not included (B550-F gaming), but as far as I know, it has the same chip of the mobos highlighted below
1 Like
I’ve been running the module unblocked for the last couple of weeks with no problems. Today, however, 2 of my 3 chassis fans shutdown at the same time. Even with the latest BIOS installed, my stupid board just can’t handle WMI calls.
Strange… I don’t have problems here…
It seems that Kernel 6.4 will bring more improvements…
$sensors
$ sensors
nct6798-isa-0290
Adapter: ISA adapter
in0: 440.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.31 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in5: 880.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 232.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.41 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.34 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 912.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in10: 304.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in11: 1.02 V (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.03 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 320.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 240.00 mV (min = +0.00 V, max = +0.00 V) ALARM
fan1: 842 RPM (min = 0 RPM)
fan2: 968 RPM (min = 0 RPM)
fan3: 756 RPM (min = 0 RPM)
fan4: 812 RPM (min = 0 RPM)
fan5: 0 RPM (min = 0 RPM)
fan6: 0 RPM (min = 0 RPM)
fan7: 704 RPM (min = 0 RPM)
SYSTIN: +33.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
CPUTIN: +31.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
AUXTIN0: +89.0°C sensor = thermistor
AUXTIN1: +49.0°C sensor = thermistor
AUXTIN2: -62.0°C sensor = thermistor
AUXTIN3: +81.0°C sensor = thermistor
PECI Agent 0 Calibration: +31.0°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
TSI0_TEMP: +39.8°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +39.6°C
Tccd1: +41.5°C
nvme-pci-0100
Adapter: PCI adapter
Composite: +37.9°C (low = -5.2°C, high = +83.8°C)
(crit = +87.8°C)
amdgpu-pci-0a00
Adapter: PCI adapter
vddgfx: 800.00 mV
fan1: 0 RPM (min = 0 RPM, max = 3500 RPM)
edge: +37.0°C (crit = +110.0°C, hyst = -273.1°C)
(emerg = +115.0°C)
junction: +42.0°C (crit = +110.0°C, hyst = -273.1°C)
(emerg = +115.0°C)
mem: +36.0°C (crit = +105.0°C, hyst = -273.1°C)
(emerg = +110.0°C)
PPT: 8.00 W (cap = 230.00 W)
nvme-pci-0500
Adapter: PCI adapter
Composite: +34.9°C (low = -5.2°C, high = +79.8°C)
(crit = +84.8°C)