# Fresh install, display sometimes black, audio sometimes stutters **URL:** \ **Category:** Newbie\ **Created:** [December 25, 2024, 12:41pm UTC](https://forum.endeavouros.com/t/fresh-install-display-sometimes-black-audio-sometimes-stutters/65223 "2024-12-25T12:41:17Z")\ **Posts on this page:** 1\ **Page:** 1
**Author:** ![Mario\_OP](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/mario_op/32/105460_2.png) [@Mario\_OP](https://forum.endeavouros.com/u/Mario_OP)\ **Post date:** [December 25, 2024, 12:41pm UTC](https://forum.endeavouros.com/t/fresh-install-display-sometimes-black-audio-sometimes-stutters/65223/1 "2024-12-25T12:41:17Z")
Hello all, I’m new to linux and haven’t built a computer in ~7 years so I just made a new one and only installed Endeavour OS to challenge myself and did that work. but now I can’t… lol In short sometimes on boot the videocard output is just not being sent to the tv, other times when I can boot, the display goes dark if I’m not playing video/games and can’t wake it up even though the pc’s rgb lights are still on. Even while using it sometimes the audio stream stops for a moment (while time running) and then resumes after the glitch time. I’ve tried going on the welcome menu and updating all mirrors in order to use this FAQ > [@\[FAQ\] Computer doesn’t boot, boots to a black screen, or stops at a message](https://forum.endeavouros.com/t/faq-computer-doesn-t-boot-boots-to-a-black-screen-or-stops-at-a-message/6887): > > While there are many potential reasons why your installation doesn’t boot to a desktop, the primary reason is that the graphics drivers haven’t loaded correctly so your login/display manager (DM) doesn’t start. This is why you get a “black screen” or stuck at an [OK] Started some service message. The normal reason for this is that you have the incorrect driver version for the kernel. This can happens when the mirror you are updating from is not fully synchronised, or times out, and so y… however on the first step I get a “WARNING: failed to rate rsync/http(s) … Download timed out after 5 seconds” so did try to extend that timeout however don’t see if that’s the right approach, also saw in a forum that I could switch bios setting so uefi is correctly selected but don’t know this motherboard in order to know what to change. Thank you for the help and if any logs/steps are needed I’ll do my best to accomodate ASUS B650-A AMD Ryzen 7 7800X3D ASRock AMD Radeon RX 7900 XT Sample from PCI-InfoCenter ```auto 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raphael/Granite Ridge Root Complex Subsystem: ASUSTeK Computer Inc. Device 8877 Flags: fast devsel 00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Raphael/Granite Ridge IOMMU Subsystem: ASUSTeK Computer Inc. Device 8877 Flags: bus master, fast devsel, latency 0, IRQ 26 Capabilities: 00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raphael/Granite Ridge Dummy Host Bridge Flags: fast devsel, IOMMU group 0 00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raphael/Granite Ridge GPP Bridge (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. Device 8877 Flags: bus master, fast devsel, latency 0, IRQ 27, IOMMU group 1 Bus: primary=00, secondary=01, subordinate=03, sec-latency=0 I/O behind bridge: f000-ffff [size=4K] [16-bit] Memory behind bridge: f6b00000-f6dfffff [size=3M] [32-bit] Prefetchable memory behind bridge: 1400000000-1fffffffff [size=48G] [32-bit] Capabilities: Kernel driver in use: pcieport 00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raphael/Granite Ridge GPP Bridge (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. Device 8877 Flags: bus master, fast devsel, latency 0, IRQ 28, IOMMU group 2 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: [disabled] [32-bit] Memory behind bridge: f6f00000-f6ffffff [size=1M] [32-bit] Prefetchable memory behind bridge: [disabled] [64-bit] Capabilities: Kernel driver in use: pcieport 00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Raphael/Granite Ridge Dummy Host Bridge Flags: fast devsel, IOMMU group 3 00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Raphael/Granite Ridge GPP Bridge (prog-if 00 [Normal decode]) Subsystem: ASUSTeK Computer Inc. Device 8877 Flags: bus master, fast devsel, latency 0, IRQ 29, IOMMU group 4 Bus: primary=00, secondary=05, subordinate=0d, sec-latency=0 I/O behind bridge: [disabled] [32-bit] Memory behind bridge: f6200000-f66fffff [size=5M] [32-bit] Prefetchable memory behind bridge: fcfff00000-fcffffffff [size=1M] [32-bit] Capabilities: Kernel driver in use: pcieport ```