Frequently black screen at starting

Hi,

For several times in the last days when i open the system, this does not come up, i have to press the on / off button to re-start again, it is the only way …

– there is a black screen, today with this information:

starting version 246.6-1-arch
endeavoros: clean 330876/2015232 filies 3611838 / B051712 blocks

After press the button and restart everything is back to “normal”.

I update the system frequently, usually every two to three days.

Greetings.

Do i have to reinstall the system?

Sounds like a hardware problem … so things to check would be :
dmesg -T
journalctl -xb

And you are looking for anything that indicates disk or mainboard error.
It could also be a graphics display problem, so the output of
inxi -G
could help us.

What kernel are you running?
uname -a

Hi,

It is getting worse, today i was able to open endeavouros only after many times pressing on/off button.

*I don’t know if this is going to help but it only happen here in endeavouros, not with MXlinux.

[jue dic  3 03:20:01 2020] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: BAR 2: assigned to efifb
[jue dic  3 03:20:01 2020] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[jue dic  3 03:20:01 2020] pci 0000:00:04.0: reg 0x10: [mem 0xc1510000-0xc1517fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[jue dic  3 03:20:01 2020] pci 0000:00:08.0: reg 0x10: [mem 0xc1529000-0xc1529fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[jue dic  3 03:20:01 2020] pci 0000:00:12.0: reg 0x10: [mem 0xc1528000-0xc1528fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[jue dic  3 03:20:01 2020] pci 0000:00:14.0: reg 0x10: [mem 0xc1500000-0xc150ffff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:14.0: PME# supported from D3hot D3cold
[jue dic  3 03:20:01 2020] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[jue dic  3 03:20:01 2020] pci 0000:00:14.2: reg 0x10: [mem 0xc151e000-0xc151ffff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:14.2: reg 0x18: [mem 0xc1527000-0xc1527fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
[jue dic  3 03:20:01 2020] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000
[jue dic  3 03:20:01 2020] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[jue dic  3 03:20:01 2020] pci 0000:00:16.0: reg 0x10: [mem 0xc1524000-0xc1524fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:16.0: PME# supported from D3hot
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: reg 0x10: [mem 0xc151c000-0xc151dfff]
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: reg 0x14: [mem 0xc1523000-0xc15230ff]
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: reg 0x18: [io  0x4090-0x4097]
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: reg 0x1c: [io  0x4080-0x4083]
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: reg 0x20: [io  0x4060-0x407f]
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: reg 0x24: [mem 0xc1522000-0xc15227ff]
[jue dic  3 03:20:01 2020] pci 0000:00:17.0: PME# supported from D3hot
[jue dic  3 03:20:01 2020] pci 0000:00:19.0: [8086:9dc5] type 00 class 0x0c8000
[jue dic  3 03:20:01 2020] pci 0000:00:19.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[jue dic  3 03:20:01 2020] pci 0000:00:1d.1: [8086:9db1] type 01 class 0x060400
[jue dic  3 03:20:01 2020] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[jue dic  3 03:20:01 2020] pci 0000:00:1d.1: PTM enabled (root), 4ns granularity
[jue dic  3 03:20:01 2020] pci 0000:00:1d.4: [8086:9db4] type 01 class 0x060400
[jue dic  3 03:20:01 2020] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[jue dic  3 03:20:01 2020] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[jue dic  3 03:20:01 2020] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[jue dic  3 03:20:01 2020] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380
[jue dic  3 03:20:01 2020] pci 0000:00:1f.3: reg 0x10: [mem 0xc1518000-0xc151bfff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:1f.3: reg 0x20: [mem 0xc1200000-0xc12fffff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[jue dic  3 03:20:01 2020] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[jue dic  3 03:20:01 2020] pci 0000:00:1f.4: reg 0x10: [mem 0xc1520000-0xc15200ff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[jue dic  3 03:20:01 2020] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[jue dic  3 03:20:01 2020] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[jue dic  3 03:20:01 2020] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[jue dic  3 03:20:01 2020] pci 0000:01:00.0: reg 0x10: [io  0x3000-0x30ff]
[jue dic  3 03:20:01 2020] pci 0000:01:00.0: reg 0x18: [mem 0xc1404000-0xc1404fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:01:00.0: reg 0x20: [mem 0xc1400000-0xc1403fff 64bit pref]
[jue dic  3 03:20:01 2020] pci 0000:01:00.0: supports D1 D2
[jue dic  3 03:20:01 2020] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0: PCI bridge to [bus 01]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0:   bridge window [mem 0xc1400000-0xc14fffff]
[jue dic  3 03:20:01 2020] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000
[jue dic  3 03:20:01 2020] pci 0000:02:00.0: reg 0x10: [mem 0xc1000000-0xc11fffff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[jue dic  3 03:20:01 2020] pci 0000:00:1d.1: PCI bridge to [bus 02]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.1:   bridge window [mem 0xc1000000-0xc11fffff]
[jue dic  3 03:20:01 2020] pci 0000:03:00.0: [15b7:5004] type 00 class 0x010802
[jue dic  3 03:20:01 2020] pci 0000:03:00.0: reg 0x10: [mem 0xc1300000-0xc1303fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.4: PCI bridge to [bus 03]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.4:   bridge window [mem 0xc1300000-0xc13fffff]
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[jue dic  3 03:20:01 2020] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[jue dic  3 03:20:01 2020] ACPI: EC: interrupt unblocked
[jue dic  3 03:20:01 2020] ACPI: EC: event unblocked
[jue dic  3 03:20:01 2020] ACPI: EC: EC_CMD/EC_SC=0x934, EC_DATA=0x930
[jue dic  3 03:20:01 2020] ACPI: EC: GPE=0x6e
[jue dic  3 03:20:01 2020] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC initialization complete
[jue dic  3 03:20:01 2020] ACPI: \_SB_.PCI0.LPCB.ECDV: EC: Used to handle transactions and events
[jue dic  3 03:20:01 2020] iommu: Default domain type: Translated 
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: vgaarb: bridge control possible
[jue dic  3 03:20:01 2020] vgaarb: loaded
[jue dic  3 03:20:01 2020] SCSI subsystem initialized
[jue dic  3 03:20:01 2020] libata version 3.00 loaded.
[jue dic  3 03:20:01 2020] ACPI: bus type USB registered
[jue dic  3 03:20:01 2020] usbcore: registered new interface driver usbfs
[jue dic  3 03:20:01 2020] usbcore: registered new interface driver hub
[jue dic  3 03:20:01 2020] usbcore: registered new device driver usb
[jue dic  3 03:20:01 2020] pps_core: LinuxPPS API ver. 1 registered
[jue dic  3 03:20:01 2020] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[jue dic  3 03:20:01 2020] PTP clock support registered
[jue dic  3 03:20:01 2020] EDAC MC: Ver: 3.0.0
[jue dic  3 03:20:01 2020] Registered efivars operations
[jue dic  3 03:20:01 2020] NetLabel: Initializing
[jue dic  3 03:20:01 2020] NetLabel:  domain hash size = 128
[jue dic  3 03:20:01 2020] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[jue dic  3 03:20:01 2020] NetLabel:  unlabeled traffic allowed by default
[jue dic  3 03:20:01 2020] PCI: Using ACPI for IRQ routing
[jue dic  3 03:20:01 2020] PCI: pci_cache_line_size set to 64 bytes
[jue dic  3 03:20:01 2020] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[jue dic  3 03:20:01 2020] e820: reserve RAM buffer [mem 0xa28e2000-0xa3ffffff]
[jue dic  3 03:20:01 2020] e820: reserve RAM buffer [mem 0xa5ea7000-0xa7ffffff]
[jue dic  3 03:20:01 2020] e820: reserve RAM buffer [mem 0xaa0ee000-0xabffffff]
[jue dic  3 03:20:01 2020] e820: reserve RAM buffer [mem 0xab0ff000-0xabffffff]
[jue dic  3 03:20:01 2020] e820: reserve RAM buffer [mem 0x24e800000-0x24fffffff]
[jue dic  3 03:20:01 2020] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[jue dic  3 03:20:01 2020] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[jue dic  3 03:20:01 2020] clocksource: Switched to clocksource tsc-early
[jue dic  3 03:20:01 2020] VFS: Disk quotas dquot_6.6.0
[jue dic  3 03:20:01 2020] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[jue dic  3 03:20:01 2020] pnp: PnP ACPI init
[jue dic  3 03:20:01 2020] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[jue dic  3 03:20:01 2020] system 00:01: [io  0x0680-0x069f] has been reserved
[jue dic  3 03:20:01 2020] system 00:01: [io  0x164e-0x164f] has been reserved
[jue dic  3 03:20:01 2020] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[jue dic  3 03:20:01 2020] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[jue dic  3 03:20:01 2020] system 00:03: [io  0x1854-0x1857] has been reserved
[jue dic  3 03:20:01 2020] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[jue dic  3 03:20:01 2020] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[jue dic  3 03:20:01 2020] pnp 00:05: Plug and Play ACPI device, IDs DLL08ca PNP0f13 (active)
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[jue dic  3 03:20:01 2020] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[jue dic  3 03:20:01 2020] system 00:07: [io  0x1800-0x18fe] could not be reserved
[jue dic  3 03:20:01 2020] system 00:07: [mem 0xfd000000-0xfd69ffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:07: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:07: [mem 0xfd6f0000-0xfdffffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[jue dic  3 03:20:01 2020] system 00:07: [mem 0xfe200000-0xfe7fffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[jue dic  3 03:20:01 2020] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[jue dic  3 03:20:01 2020] system 00:08: [io  0x2000-0x20fe] has been reserved
[jue dic  3 03:20:01 2020] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[jue dic  3 03:20:01 2020] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[jue dic  3 03:20:01 2020] pnp: PnP ACPI: found 10 devices
[jue dic  3 03:20:01 2020] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[jue dic  3 03:20:01 2020] NET: Registered protocol family 2
[jue dic  3 03:20:01 2020] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[jue dic  3 03:20:01 2020] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[jue dic  3 03:20:01 2020] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[jue dic  3 03:20:01 2020] TCP: Hash tables configured (established 65536 bind 65536)
[jue dic  3 03:20:01 2020] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear)
[jue dic  3 03:20:01 2020] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[jue dic  3 03:20:01 2020] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[jue dic  3 03:20:01 2020] NET: Registered protocol family 1
[jue dic  3 03:20:01 2020] NET: Registered protocol family 44
[jue dic  3 03:20:01 2020] pci 0000:00:15.0: BAR 0: assigned [mem 0xaf800000-0xaf800fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:15.1: BAR 0: assigned [mem 0xaf801000-0xaf801fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:19.0: BAR 0: assigned [mem 0xaf802000-0xaf802fff 64bit]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0: PCI bridge to [bus 01]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.0:   bridge window [mem 0xc1400000-0xc14fffff]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.1: PCI bridge to [bus 02]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.1:   bridge window [mem 0xc1000000-0xc11fffff]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.4: PCI bridge to [bus 03]
[jue dic  3 03:20:01 2020] pci 0000:00:1d.4:   bridge window [mem 0xc1300000-0xc13fffff]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 15 [mem 0xaf800000-0xdfffffff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:00: resource 16 [mem 0xfc800000-0xfe7fffff window]
[jue dic  3 03:20:01 2020] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[jue dic  3 03:20:01 2020] pci_bus 0000:01: resource 1 [mem 0xc1400000-0xc14fffff]
[jue dic  3 03:20:01 2020] pci_bus 0000:02: resource 1 [mem 0xc1000000-0xc11fffff]
[jue dic  3 03:20:01 2020] pci_bus 0000:03: resource 1 [mem 0xc1300000-0xc13fffff]
[jue dic  3 03:20:01 2020] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[jue dic  3 03:20:01 2020] PCI: CLS 64 bytes, default 64
[jue dic  3 03:20:01 2020] Trying to unpack rootfs image as initramfs...
[jue dic  3 03:20:01 2020] Freeing initrd memory: 11160K
[jue dic  3 03:20:01 2020] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[jue dic  3 03:20:01 2020] software IO TLB: mapped [mem 0x9c78e000-0xa078e000] (64MB)
[jue dic  3 03:20:01 2020] check: Scanning for low memory corruption every 60 seconds
[jue dic  3 03:20:01 2020] Initialise system trusted keyrings
[jue dic  3 03:20:01 2020] Key type blacklist registered
[jue dic  3 03:20:01 2020] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[jue dic  3 03:20:01 2020] zbud: loaded
[jue dic  3 03:20:01 2020] Key type asymmetric registered
[jue dic  3 03:20:01 2020] Asymmetric key parser 'x509' registered
[jue dic  3 03:20:01 2020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[jue dic  3 03:20:01 2020] io scheduler mq-deadline registered
[jue dic  3 03:20:01 2020] io scheduler kyber registered
[jue dic  3 03:20:01 2020] io scheduler bfq registered
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.0: PME: Signaling with IRQ 122
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.0: AER: enabled with IRQ 122
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.0: DPC: enabled with IRQ 122
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.1: PME: Signaling with IRQ 123
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.4: PME: Signaling with IRQ 124
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.4: AER: enabled with IRQ 124
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.4: DPC: enabled with IRQ 124
[jue dic  3 03:20:01 2020] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[jue dic  3 03:20:01 2020] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[jue dic  3 03:20:01 2020] efifb: probing for efifb
[jue dic  3 03:20:01 2020] efifb: framebuffer at 0xb0000000, using 4160k, total 4160k
[jue dic  3 03:20:01 2020] efifb: mode is 1366x768x32, linelength=5504, pages=1
[jue dic  3 03:20:01 2020] efifb: scrolling: redraw
[jue dic  3 03:20:01 2020] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[jue dic  3 03:20:01 2020] fbcon: Deferring console take-over
[jue dic  3 03:20:01 2020] fb0: EFI VGA frame buffer device
[jue dic  3 03:20:01 2020] intel_idle: MWAIT substates: 0x11142120
[jue dic  3 03:20:01 2020] intel_idle: v0.5.1 model 0x8E
[jue dic  3 03:20:01 2020] intel_idle: Local APIC timer is reliable in all C-states
[jue dic  3 03:20:01 2020] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[jue dic  3 03:20:01 2020] ACPI: Lid Switch [LID0]
[jue dic  3 03:20:01 2020] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[jue dic  3 03:20:01 2020] ACPI: Power Button [PBTN]
[jue dic  3 03:20:01 2020] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[jue dic  3 03:20:01 2020] ACPI: Sleep Button [SBTN]
[jue dic  3 03:20:01 2020] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[jue dic  3 03:20:01 2020] ACPI: Power Button [PWRF]
[jue dic  3 03:20:01 2020] thermal LNXTHERM:00: registered as thermal_zone0
[jue dic  3 03:20:01 2020] ACPI: Thermal Zone [THM] (25 C)
[jue dic  3 03:20:01 2020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[jue dic  3 03:20:01 2020] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[jue dic  3 03:20:01 2020] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[jue dic  3 03:20:01 2020] nvme nvme0: pci function 0000:03:00.0
[jue dic  3 03:20:01 2020] ahci 0000:00:17.0: version 3.0
[jue dic  3 03:20:01 2020] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[jue dic  3 03:20:01 2020] ahci 0000:00:17.0: flags: 64bit ncq sntf pm clo only pio slum part deso sadm sds apst 
[jue dic  3 03:20:01 2020] scsi host0: ahci
[jue dic  3 03:20:01 2020] scsi host1: ahci
[jue dic  3 03:20:01 2020] ata1: SATA max UDMA/133 abar m2048@0xc1522000 port 0xc1522100 irq 126
[jue dic  3 03:20:01 2020] ata2: SATA max UDMA/133 abar m2048@0xc1522000 port 0xc1522180 irq 126
[jue dic  3 03:20:01 2020] usbcore: registered new interface driver usbserial_generic
[jue dic  3 03:20:01 2020] usbserial: USB Serial support registered for generic
[jue dic  3 03:20:01 2020] rtc_cmos 00:02: RTC can wake from S4
[jue dic  3 03:20:01 2020] rtc_cmos 00:02: registered as rtc0
[jue dic  3 03:20:01 2020] rtc_cmos 00:02: setting system clock to 2020-12-03T08:20:02 UTC (1606983602)
[jue dic  3 03:20:01 2020] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[jue dic  3 03:20:01 2020] intel_pstate: Intel P-state driver initializing
[jue dic  3 03:20:01 2020] intel_pstate: HWP enabled
[jue dic  3 03:20:01 2020] ledtrig-cpu: registered to indicate activity on CPUs
[jue dic  3 03:20:01 2020] intel_pmc_core INT33A1:00:  initialized
[jue dic  3 03:20:01 2020] drop_monitor: Initializing network drop monitor service
[jue dic  3 03:20:01 2020] NET: Registered protocol family 10
[jue dic  3 03:20:01 2020] Segment Routing with IPv6
[jue dic  3 03:20:01 2020] RPL Segment Routing with IPv6
[jue dic  3 03:20:01 2020] NET: Registered protocol family 17
[jue dic  3 03:20:01 2020] microcode: sig=0x806ec, pf=0x80, revision=0xde
[jue dic  3 03:20:01 2020] microcode: Microcode Update Driver: v2.2.
[jue dic  3 03:20:01 2020] IPI shorthand broadcast: enabled
[jue dic  3 03:20:01 2020] sched_clock: Marking stable (446521872, 3937131)->(455236173, -4777170)
[jue dic  3 03:20:01 2020] registered taskstats version 1
[jue dic  3 03:20:01 2020] Loading compiled-in X.509 certificates
[jue dic  3 03:20:01 2020] nvme nvme0: 8/0/0 default/read/poll queues
[jue dic  3 03:20:01 2020] Loaded X.509 cert 'Build time autogenerated kernel key: 5cc7cf86e3be95b78992997e03e5d198512e8cbf'
[jue dic  3 03:20:01 2020] zswap: loaded using pool lz4/z3fold
[jue dic  3 03:20:01 2020] Key type ._fscrypt registered
[jue dic  3 03:20:01 2020] Key type .fscrypt registered
[jue dic  3 03:20:01 2020] Key type fscrypt-provisioning registered
[jue dic  3 03:20:01 2020] PM:   Magic number: 0:380:320
[jue dic  3 03:20:01 2020] misc microcode: hash matches
[jue dic  3 03:20:01 2020] platform microcode: hash matches
[jue dic  3 03:20:01 2020] tty tty45: hash matches
[jue dic  3 03:20:01 2020] RAS: Correctable Errors collector initialized.
[jue dic  3 03:20:01 2020]  nvme0n1: p1 p2 p3 p4 p5 p6 p7
[jue dic  3 03:20:01 2020] ata1: SATA link down (SStatus 4 SControl 300)
[jue dic  3 03:20:01 2020] ata2: SATA link down (SStatus 4 SControl 300)
[jue dic  3 03:20:01 2020] Freeing unused decrypted memory: 2040K
[jue dic  3 03:20:01 2020] Freeing unused kernel image (initmem) memory: 1660K
[jue dic  3 03:20:01 2020] Write protecting the kernel read-only data: 24576k
[jue dic  3 03:20:01 2020] Freeing unused kernel image (text/rodata gap) memory: 2044K
[jue dic  3 03:20:01 2020] Freeing unused kernel image (rodata/data gap) memory: 240K
[jue dic  3 03:20:01 2020] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[jue dic  3 03:20:01 2020] Run /init as init process
[jue dic  3 03:20:01 2020]   with arguments:
[jue dic  3 03:20:01 2020]     /init
[jue dic  3 03:20:01 2020]   with environment:
[jue dic  3 03:20:01 2020]     HOME=/
[jue dic  3 03:20:01 2020]     TERM=linux
[jue dic  3 03:20:01 2020]     BOOT_IMAGE=/boot/vmlinuz-linux
[jue dic  3 03:20:01 2020] fbcon: Taking over console
[jue dic  3 03:20:01 2020] Console: switching to colour frame buffer device 170x48
[jue dic  3 03:20:01 2020] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[jue dic  3 03:20:01 2020] i8042: Warning: Keylock active
[jue dic  3 03:20:01 2020] serio: i8042 KBD port at 0x60,0x64 irq 1
[jue dic  3 03:20:01 2020] serio: i8042 AUX port at 0x60,0x64 irq 12
[jue dic  3 03:20:01 2020] xhci_hcd 0000:00:14.0: xHCI Host Controller
[jue dic  3 03:20:01 2020] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[jue dic  3 03:20:01 2020] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[jue dic  3 03:20:01 2020] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[jue dic  3 03:20:01 2020] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[jue dic  3 03:20:01 2020] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[jue dic  3 03:20:01 2020] usb usb1: Product: xHCI Host Controller
[jue dic  3 03:20:01 2020] usb usb1: Manufacturer: Linux 5.9.11-arch2-1 xhci-hcd
[jue dic  3 03:20:01 2020] usb usb1: SerialNumber: 0000:00:14.0
[jue dic  3 03:20:01 2020] hub 1-0:1.0: USB hub found
[jue dic  3 03:20:01 2020] hub 1-0:1.0: 12 ports detected
[jue dic  3 03:20:01 2020] xhci_hcd 0000:00:14.0: xHCI Host Controller
[jue dic  3 03:20:01 2020] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[jue dic  3 03:20:01 2020] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[jue dic  3 03:20:01 2020] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[jue dic  3 03:20:01 2020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[jue dic  3 03:20:01 2020] usb usb2: Product: xHCI Host Controller
[jue dic  3 03:20:01 2020] usb usb2: Manufacturer: Linux 5.9.11-arch2-1 xhci-hcd
[jue dic  3 03:20:01 2020] usb usb2: SerialNumber: 0000:00:14.0
[jue dic  3 03:20:01 2020] hub 2-0:1.0: USB hub found
[jue dic  3 03:20:01 2020] hub 2-0:1.0: 6 ports detected
[jue dic  3 03:20:01 2020] usb: port power management may be unreliable
[jue dic  3 03:20:01 2020] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[jue dic  3 03:20:01 2020] random: fast init done
[jue dic  3 03:20:02 2020] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[jue dic  3 03:20:02 2020] systemd[1]: systemd 247.1-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[jue dic  3 03:20:02 2020] systemd[1]: Detected architecture x86-64.
[jue dic  3 03:20:02 2020] systemd[1]: Set hostname to <keos-pc>.
[jue dic  3 03:20:02 2020] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[jue dic  3 03:20:02 2020] systemd[1]: Queued start job for default target Graphical Interface.
[jue dic  3 03:20:02 2020] systemd[1]: Created slice system-getty.slice.
[jue dic  3 03:20:02 2020] systemd[1]: Created slice system-modprobe.slice.
[jue dic  3 03:20:02 2020] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[jue dic  3 03:20:02 2020] systemd[1]: Created slice User and Session Slice.
[jue dic  3 03:20:02 2020] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[jue dic  3 03:20:02 2020] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[jue dic  3 03:20:02 2020] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[jue dic  3 03:20:02 2020] systemd[1]: Reached target Local Encrypted Volumes.
[jue dic  3 03:20:02 2020] systemd[1]: Reached target Login Prompts.
[jue dic  3 03:20:02 2020] systemd[1]: Reached target Paths.
[jue dic  3 03:20:02 2020] systemd[1]: Reached target Remote File Systems.
[jue dic  3 03:20:02 2020] systemd[1]: Reached target Slices.
[jue dic  3 03:20:02 2020] systemd[1]: Reached target Swap.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on LVM2 metadata daemon socket.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on LVM2 poll daemon socket.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on Process Core Dump Socket.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on Journal Audit Socket.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on Journal Socket (/dev/log).
[jue dic  3 03:20:02 2020] systemd[1]: Listening on Journal Socket.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on udev Control Socket.
[jue dic  3 03:20:02 2020] systemd[1]: Listening on udev Kernel Socket.
[jue dic  3 03:20:02 2020] systemd[1]: Mounting Huge Pages File System...
[jue dic  3 03:20:02 2020] systemd[1]: Mounting POSIX Message Queue File System...
[jue dic  3 03:20:02 2020] systemd[1]: Mounting Kernel Debug File System...
[jue dic  3 03:20:02 2020] systemd[1]: Mounting Kernel Trace File System...
[jue dic  3 03:20:02 2020] systemd[1]: Mounting Temporary Directory (/tmp)...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Create list of static device nodes for the current kernel...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Load Kernel Module configfs...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Load Kernel Module drm...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Load Kernel Module fuse...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Set Up Additional Binary Formats...
[jue dic  3 03:20:02 2020] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[jue dic  3 03:20:02 2020] systemd[1]: Starting Journal Service...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Load Kernel Modules...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Remount Root and Kernel File Systems...
[jue dic  3 03:20:02 2020] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[jue dic  3 03:20:02 2020] systemd[1]: Starting Wait Until Kernel Time Synchronized...
[jue dic  3 03:20:02 2020] Linux agpgart interface v0.103
[jue dic  3 03:20:02 2020] systemd[1]: Starting Coldplug All udev Devices...
[jue dic  3 03:20:02 2020] random: lvm: uninitialized urandom read (4 bytes read)
[jue dic  3 03:20:02 2020] systemd[1]: Mounted Huge Pages File System.
[jue dic  3 03:20:02 2020] systemd[1]: Mounted POSIX Message Queue File System.
[jue dic  3 03:20:02 2020] systemd[1]: Mounted Kernel Debug File System.
[jue dic  3 03:20:02 2020] systemd[1]: Mounted Kernel Trace File System.
[jue dic  3 03:20:02 2020] systemd[1]: Mounted Temporary Directory (/tmp).
[jue dic  3 03:20:02 2020] systemd[1]: Finished Create list of static device nodes for the current kernel.
[jue dic  3 03:20:02 2020] systemd[1]: modprobe@configfs.service: Succeeded.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Load Kernel Module configfs.
[jue dic  3 03:20:02 2020] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 252 (systemd-binfmt)
[jue dic  3 03:20:02 2020] EXT4-fs (nvme0n1p3): re-mounted. Opts: (null)
[jue dic  3 03:20:02 2020] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[jue dic  3 03:20:02 2020] systemd[1]: Mounting Kernel Configuration File System...
[jue dic  3 03:20:02 2020] fuse: init (API version 7.31)
[jue dic  3 03:20:02 2020] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[jue dic  3 03:20:02 2020] Asymmetric key parser 'pkcs8' registered
[jue dic  3 03:20:02 2020] systemd[1]: Mounted Kernel Configuration File System.
[jue dic  3 03:20:02 2020] systemd[1]: modprobe@fuse.service: Succeeded.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Load Kernel Module fuse.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Set Up Additional Binary Formats.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Load Kernel Modules.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Remount Root and Kernel File Systems.
[jue dic  3 03:20:02 2020] systemd[1]: Mounting FUSE Control File System...
[jue dic  3 03:20:02 2020] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[jue dic  3 03:20:02 2020] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[jue dic  3 03:20:02 2020] systemd[1]: Starting Load/Save Random Seed...
[jue dic  3 03:20:02 2020] systemd[1]: Starting Apply Kernel Variables...
[jue dic  3 03:20:02 2020] systemd[1]: Condition check resulted in Create System Users being skipped.
[jue dic  3 03:20:02 2020] systemd[1]: Starting Create Static Device Nodes in /dev...
[jue dic  3 03:20:02 2020] usb 1-1: New USB device found, idVendor=25a7, idProduct=fa67, bcdDevice= 7.10
[jue dic  3 03:20:02 2020] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[jue dic  3 03:20:02 2020] usb 1-1: Product: 2.4G Receiver
[jue dic  3 03:20:02 2020] usb 1-1: Manufacturer: CX
[jue dic  3 03:20:02 2020] systemd[1]: Mounted FUSE Control File System.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Apply Kernel Variables.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Create Static Device Nodes in /dev.
[jue dic  3 03:20:02 2020] audit: type=1130 audit(1606983603.446:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:02 2020] systemd[1]: modprobe@drm.service: Succeeded.
[jue dic  3 03:20:02 2020] systemd[1]: Finished Load Kernel Module drm.
[jue dic  3 03:20:02 2020] audit: type=1130 audit(1606983603.446:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:02 2020] audit: type=1131 audit(1606983603.446:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:02 2020] audit: type=1334 audit(1606983603.449:5): prog-id=5 op=LOAD
[jue dic  3 03:20:02 2020] audit: type=1334 audit(1606983603.449:6): prog-id=6 op=LOAD
[jue dic  3 03:20:02 2020] systemd[1]: Starting Rule-based Manager for Device Events and Files...
[jue dic  3 03:20:02 2020] systemd[1]: Started Journal Service.
[jue dic  3 03:20:02 2020] audit: type=1130 audit(1606983603.459:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:02 2020] audit: type=1130 audit(1606983603.466:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:02 2020] tsc: Refined TSC clocksource calibration: 1799.995 MHz
[jue dic  3 03:20:02 2020] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f224e3c43, max_idle_ns: 440795212657 ns
[jue dic  3 03:20:02 2020] clocksource: Switched to clocksource tsc
[jue dic  3 03:20:02 2020] audit: type=1130 audit(1606983603.490:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:02 2020] audit: type=1130 audit(1606983603.506:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:02 2020] ACPI: AC Adapter [AC] (on-line)
[jue dic  3 03:20:02 2020] input: Intel HID events as /devices/platform/INT33D5:00/input/input6
[jue dic  3 03:20:02 2020] intel-hid INT33D5:00: platform supports 5 button array
[jue dic  3 03:20:02 2020] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7
[jue dic  3 03:20:02 2020] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[jue dic  3 03:20:02 2020] hid: raw HID events driver (C) Jiri Kosina
[jue dic  3 03:20:02 2020] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[jue dic  3 03:20:02 2020] wmi_bus wmi_bus-PNP0C14:02: WQBC data block query control method not found
[jue dic  3 03:20:02 2020] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[jue dic  3 03:20:02 2020] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[jue dic  3 03:20:02 2020] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[jue dic  3 03:20:02 2020] idma64 idma64.0: Found Intel integrated DMA 64-bit
[jue dic  3 03:20:02 2020] intel_rapl_common: Found RAPL domain package
[jue dic  3 03:20:02 2020] intel_rapl_common: Found RAPL domain dram
[jue dic  3 03:20:02 2020] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[jue dic  3 03:20:02 2020] battery: ACPI: Battery Slot [BAT0] (battery present)
[jue dic  3 03:20:02 2020] i2c_hid i2c-DELL08CA:00: supply vdd not found, using dummy regulator
[jue dic  3 03:20:02 2020] i2c_hid i2c-DELL08CA:00: supply vddl not found, using dummy regulator
[jue dic  3 03:20:02 2020] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[jue dic  3 03:20:02 2020] libphy: Fixed MDIO Bus: probed
[jue dic  3 03:20:02 2020] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[jue dic  3 03:20:02 2020] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[jue dic  3 03:20:02 2020] libphy: r8169: probed
[jue dic  3 03:20:02 2020] r8169 0000:01:00.0 eth0: RTL8106e, d8:d0:90:46:9d:0f, XID 449, IRQ 137
[jue dic  3 03:20:02 2020] usb 1-6: New USB device found, idVendor=0bda, idProduct=5520, bcdDevice=85.11
[jue dic  3 03:20:02 2020] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[jue dic  3 03:20:02 2020] usb 1-6: Product: Integrated_Webcam_HD
[jue dic  3 03:20:02 2020] usb 1-6: Manufacturer: CNFHH46P20641004E1C0
[jue dic  3 03:20:02 2020] usb 1-6: SerialNumber: 200901010001
[jue dic  3 03:20:02 2020] i2c i2c-1: 1/2 memory slots populated (from DMI)
[jue dic  3 03:20:02 2020] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[jue dic  3 03:20:02 2020] input: PC Speaker as /devices/platform/pcspkr/input/input8
[jue dic  3 03:20:02 2020] idma64 idma64.1: Found Intel integrated DMA 64-bit
[jue dic  3 03:20:02 2020] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[jue dic  3 03:20:02 2020] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[jue dic  3 03:20:02 2020] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[jue dic  3 03:20:02 2020] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[jue dic  3 03:20:02 2020] RAPL PMU: hw unit of domain package 2^-14 Joules
[jue dic  3 03:20:02 2020] RAPL PMU: hw unit of domain dram 2^-14 Joules
[jue dic  3 03:20:02 2020] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[jue dic  3 03:20:02 2020] RAPL PMU: hw unit of domain psys 2^-14 Joules
[jue dic  3 03:20:02 2020] intel-lpss 0000:00:19.0: enabling device (0000 -> 0002)
[jue dic  3 03:20:02 2020] cryptd: max_cpu_qlen set to 1000
[jue dic  3 03:20:02 2020] usb 1-8: new full-speed USB device number 4 using xhci_hcd
[jue dic  3 03:20:02 2020] AVX2 version of gcm_enc/dec engaged.
[jue dic  3 03:20:02 2020] AES CTR mode by8 optimization enabled
[jue dic  3 03:20:02 2020] random: avahi-daemon: uninitialized urandom read (4 bytes read)
[jue dic  3 03:20:02 2020] random: dbus-daemon: uninitialized urandom read (12 bytes read)
[jue dic  3 03:20:02 2020] usb 1-8: New USB device found, idVendor=04f3, idProduct=24dd, bcdDevice=57.12
[jue dic  3 03:20:02 2020] usb 1-8: New USB device strings: Mfr=4, Product=14, SerialNumber=0
[jue dic  3 03:20:02 2020] usb 1-8: Product: Touchscreen
[jue dic  3 03:20:02 2020] usb 1-8: Manufacturer: ELAN
[jue dic  3 03:20:03 2020] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380
[jue dic  3 03:20:03 2020] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[jue dic  3 03:20:03 2020] checking generic (b0000000 410000) vs hw (c0000000 1000000)
[jue dic  3 03:20:03 2020] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[jue dic  3 03:20:03 2020] fb0: switching to inteldrmfb from EFI VGA
[jue dic  3 03:20:03 2020] Console: switching to colour dummy device 80x25
[jue dic  3 03:20:03 2020] i915 0000:00:02.0: vgaarb: deactivate vga console
[jue dic  3 03:20:03 2020] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[jue dic  3 03:20:03 2020] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[jue dic  3 03:20:03 2020] usb 1-10: new full-speed USB device number 5 using xhci_hcd
[jue dic  3 03:20:03 2020] usb 1-10: New USB device found, idVendor=0cf3, idProduct=e009, bcdDevice= 0.01
[jue dic  3 03:20:03 2020] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[jue dic  3 03:20:03 2020] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x4f1001)
[jue dic  3 03:20:03 2020] psmouse serio1: elantech: elantech_send_cmd query 0x02 failed.
[jue dic  3 03:20:03 2020] psmouse serio1: elantech: failed to query capabilities.
[jue dic  3 03:20:03 2020] intel_rapl_common: Found RAPL domain package
[jue dic  3 03:20:03 2020] intel_rapl_common: Found RAPL domain core
[jue dic  3 03:20:03 2020] intel_rapl_common: Found RAPL domain uncore
[jue dic  3 03:20:03 2020] intel_rapl_common: Found RAPL domain dram
[jue dic  3 03:20:03 2020] input: Dell WMI hotkeys as /devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[jue dic  3 03:20:03 2020] r8169 0000:01:00.0 enp1s0: renamed from eth0
[jue dic  3 03:20:03 2020] RTL8208 Fast Ethernet r8169-100:00: attached PHY driver [RTL8208 Fast Ethernet] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE)
[jue dic  3 03:20:03 2020] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
[jue dic  3 03:20:03 2020] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[jue dic  3 03:20:03 2020] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[jue dic  3 03:20:03 2020] iTCO_vendor_support: vendor-support=0
[jue dic  3 03:20:03 2020] input: DELL08CA:00 04F3:30C4 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL08CA:00/0018:04F3:30C4.0001/input/input11
[jue dic  3 03:20:03 2020] input: DELL08CA:00 04F3:30C4 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL08CA:00/0018:04F3:30C4.0001/input/input12
[jue dic  3 03:20:03 2020] hid-generic 0018:04F3:30C4.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL08CA:00 04F3:30C4] on i2c-DELL08CA:00
[jue dic  3 03:20:03 2020] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810
[jue dic  3 03:20:03 2020] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[jue dic  3 03:20:03 2020] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877
[jue dic  3 03:20:03 2020] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a
[jue dic  3 03:20:03 2020] random: crng init done
[jue dic  3 03:20:03 2020] random: 7 urandom warning(s) missed due to ratelimiting
[jue dic  3 03:20:03 2020] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
[jue dic  3 03:20:03 2020] r8169 0000:01:00.0 enp1s0: Link is Down
[jue dic  3 03:20:03 2020] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[jue dic  3 03:20:03 2020] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[jue dic  3 03:20:03 2020] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[jue dic  3 03:20:03 2020] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:25A7:FA67.0002/input/input14
[jue dic  3 03:20:03 2020] ath: EEPROM regdomain: 0x6c
[jue dic  3 03:20:03 2020] ath: EEPROM indicates we should expect a direct regpair map
[jue dic  3 03:20:03 2020] ath: Country alpha2 being used: 00
[jue dic  3 03:20:03 2020] ath: Regpair used: 0x6c
[jue dic  3 03:20:03 2020] hid-generic 0003:25A7:FA67.0002: input,hidraw1: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-0000:00:14.0-1/input0
[jue dic  3 03:20:03 2020] wl: loading out-of-tree module taints kernel.
[jue dic  3 03:20:03 2020] wl: module license 'MIXED/Proprietary' taints kernel.
[jue dic  3 03:20:03 2020] Disabling lock debugging due to kernel taint
[jue dic  3 03:20:03 2020] input: CX 2.4G Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA67.0003/input/input15
[jue dic  3 03:20:03 2020] input: CX 2.4G Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA67.0003/input/input16
[jue dic  3 03:20:03 2020] input: CX 2.4G Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA67.0003/input/input17
[jue dic  3 03:20:03 2020] input: DELL08CA:00 04F3:30C4 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL08CA:00/0018:04F3:30C4.0001/input/input20
[jue dic  3 03:20:04 2020] wl: module verification failed: signature and/or required key missing - tainting kernel
[jue dic  3 03:20:04 2020] input: CX 2.4G Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:25A7:FA67.0003/input/input18
[jue dic  3 03:20:04 2020] input: DELL08CA:00 04F3:30C4 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL08CA:00/0018:04F3:30C4.0001/input/input21
[jue dic  3 03:20:04 2020] hid-multitouch 0018:04F3:30C4.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL08CA:00 04F3:30C4] on i2c-DELL08CA:00
[jue dic  3 03:20:04 2020] hid-generic 0003:25A7:FA67.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-0000:00:14.0-1/input1
[jue dic  3 03:20:04 2020] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:24DD.0004/input/input23
[jue dic  3 03:20:04 2020] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:24DD.0004/input/input24
[jue dic  3 03:20:04 2020] input: ELAN Touchscreen UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:04F3:24DD.0004/input/input25
[jue dic  3 03:20:04 2020] hid-multitouch 0003:04F3:24DD.0004: input,hiddev1,hidraw3: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-8/input0
[jue dic  3 03:20:04 2020] usbcore: registered new interface driver usbhid
[jue dic  3 03:20:04 2020] usbhid: USB HID core driver
[jue dic  3 03:20:04 2020] mousedev: PS/2 mouse device common for all mice
[jue dic  3 03:20:04 2020] psmouse serio1: Failed to enable mouse on isa0060/serio1
[jue dic  3 03:20:04 2020] [drm] Initialized i915 1.6.0 20200715 for 0000:00:02.0 on minor 0
[jue dic  3 03:20:05 2020] r8169 0000:01:00.0 enp1s0: Link is Up - 100Mbps/Full - flow control rx/tx
[jue dic  3 03:20:05 2020] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[jue dic  3 03:20:05 2020] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input27
[jue dic  3 03:20:05 2020] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[jue dic  3 03:20:05 2020] fbcon: i915drmfb (fb0) is primary device
[jue dic  3 03:20:05 2020] Console: switching to colour frame buffer device 170x48
[jue dic  3 03:20:05 2020] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[jue dic  3 03:20:05 2020] mc: Linux media interface: v0.10
[jue dic  3 03:20:05 2020] videodev: Linux video capture interface: v2.00
[jue dic  3 03:20:05 2020] Bluetooth: Core ver 2.22
[jue dic  3 03:20:05 2020] NET: Registered protocol family 31
[jue dic  3 03:20:05 2020] Bluetooth: HCI device and connection manager initialized
[jue dic  3 03:20:05 2020] Bluetooth: HCI socket layer initialized
[jue dic  3 03:20:05 2020] Bluetooth: L2CAP socket layer initialized
[jue dic  3 03:20:05 2020] Bluetooth: SCO socket layer initialized
[jue dic  3 03:20:05 2020] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[jue dic  3 03:20:05 2020] usbcore: registered new interface driver btusb
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3204: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[jue dic  3 03:20:05 2020] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[jue dic  3 03:20:05 2020] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5520)
[jue dic  3 03:20:05 2020] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input29
[jue dic  3 03:20:05 2020] usbcore: registered new interface driver uvcvideo
[jue dic  3 03:20:05 2020] USB Video Class driver (1.1.1)
[jue dic  3 03:20:05 2020] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input9
[jue dic  3 03:20:06 2020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1f.3/sound/card0/input28
[jue dic  3 03:20:06 2020] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[jue dic  3 03:20:06 2020] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[jue dic  3 03:20:06 2020] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[jue dic  3 03:20:06 2020] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[jue dic  3 03:20:06 2020] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
[jue dic  3 03:20:06 2020] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
[jue dic  3 03:20:08 2020] kauditd_printk_skb: 26 callbacks suppressed
[jue dic  3 03:20:08 2020] audit: type=1103 audit(1606983609.886:37): pid=815 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[jue dic  3 03:20:08 2020] audit: type=1130 audit(1606983609.923:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@972 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:08 2020] audit: type=1101 audit(1606983609.943:39): pid=819 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:08 2020] audit: type=1103 audit(1606983609.943:40): pid=819 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[jue dic  3 03:20:08 2020] audit: type=1006 audit(1606983609.943:41): pid=819 uid=0 old-auid=4294967295 auid=972 tty=(none) old-ses=4294967295 ses=1 res=1
[jue dic  3 03:20:08 2020] audit: type=1105 audit(1606983609.946:42): pid=819 uid=0 auid=972 ses=1 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:08 2020] audit: type=1334 audit(1606983609.956:43): prog-id=11 op=LOAD
[jue dic  3 03:20:08 2020] audit: type=1334 audit(1606983609.956:44): prog-id=11 op=UNLOAD
[jue dic  3 03:20:09 2020] audit: type=1130 audit(1606983610.050:45): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@972 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:09 2020] audit: type=1105 audit(1606983610.056:46): pid=815 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_open grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[jue dic  3 03:20:27 2020] kauditd_printk_skb: 2 callbacks suppressed
[jue dic  3 03:20:27 2020] audit: type=1100 audit(1606983628.446:49): pid=862 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="keos" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[jue dic  3 03:20:27 2020] audit: type=1101 audit(1606983628.446:50): pid=862 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="keos" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[jue dic  3 03:20:27 2020] audit: type=1106 audit(1606983628.503:51): pid=815 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:session_close grantors=pam_unix,pam_systemd acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[jue dic  3 03:20:27 2020] audit: type=1104 audit(1606983628.506:52): pid=815 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[jue dic  3 03:20:27 2020] audit: type=1103 audit(1606983628.513:53): pid=862 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_shells,pam_faillock,pam_permit,pam_faillock,pam_gnome_keyring acct="keos" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[jue dic  3 03:20:27 2020] audit: type=1006 audit(1606983628.513:54): pid=862 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[jue dic  3 03:20:27 2020] audit: type=1130 audit(1606983628.553:55): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:27 2020] audit: type=1101 audit(1606983628.570:56): pid=872 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="keos" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:27 2020] audit: type=1103 audit(1606983628.570:57): pid=872 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="keos" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[jue dic  3 03:20:27 2020] audit: type=1006 audit(1606983628.570:58): pid=872 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[jue dic  3 03:20:32 2020] wlan0: authenticate with c0:7c:d1:27:a0:10
[jue dic  3 03:20:32 2020] wlan0: send auth to c0:7c:d1:27:a0:10 (try 1/3)
[jue dic  3 03:20:32 2020] wlan0: authenticated
[jue dic  3 03:20:32 2020] wlan0: associate with c0:7c:d1:27:a0:10 (try 1/3)
[jue dic  3 03:20:32 2020] wlan0: RX AssocResp from c0:7c:d1:27:a0:10 (capab=0x1411 status=0 aid=1)
[jue dic  3 03:20:32 2020] wlan0: associated
[jue dic  3 03:20:32 2020] ath: EEPROM regdomain: 0x8348
[jue dic  3 03:20:32 2020] ath: EEPROM indicates we should expect a country code
[jue dic  3 03:20:32 2020] ath: doing EEPROM country->regdmn map search
[jue dic  3 03:20:32 2020] ath: country maps to regdmn code: 0x3a
[jue dic  3 03:20:32 2020] ath: Country alpha2 being used: US
[jue dic  3 03:20:32 2020] ath: Regpair used: 0x3a
[jue dic  3 03:20:32 2020] ath: regdomain 0x8348 dynamically updated by country element
[jue dic  3 03:20:32 2020] wlan0: Limiting TX power to 27 (30 - 3) dBm as advertised by c0:7c:d1:27:a0:10
[jue dic  3 03:20:32 2020] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[jue dic  3 03:20:32 2020] kauditd_printk_skb: 11 callbacks suppressed
[jue dic  3 03:20:32 2020] audit: type=1130 audit(1606983633.467:70): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-time-wait-sync comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:32 2020] audit: type=1130 audit(1606983633.477:71): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:32 2020] audit: type=1131 audit(1606983633.484:72): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:32 2020] audit: type=1130 audit(1606983633.501:73): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:32 2020] audit: type=1130 audit(1606983633.511:74): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:32 2020] audit: type=1131 audit(1606983633.511:75): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:32 2020] audit: type=1131 audit(1606983633.524:76): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:33 2020] audit: type=1334 audit(1606983633.597:77): prog-id=10 op=UNLOAD
[jue dic  3 03:20:33 2020] audit: type=1334 audit(1606983633.597:78): prog-id=9 op=UNLOAD
[jue dic  3 03:20:34 2020] audit: type=1130 audit(1606983634.744:79): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=updatedb comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:20:43 2020] kauditd_printk_skb: 3 callbacks suppressed
[jue dic  3 03:20:43 2020] audit: type=1131 audit(1606983643.547:83): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:21:12 2020] audit: type=1130 audit(1606983673.270:84): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[jue dic  3 03:21:12 2020] audit: type=1131 audit(1606983673.270:85): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[keos@keos-pc ~]$ 

[keos@keos-pc ~]$ journalctl -xb
-- Journal begins at Thu 2020-11-05 03:57:31 EST, ends at Thu 2020-12-03 03:24:>
dic 03 03:20:03 keos-pc kernel: microcode: microcode updated early to revision >
dic 03 03:20:03 keos-pc kernel: Linux version 5.9.11-arch2-1 (linux@archlinux) >
dic 03 03:20:03 keos-pc kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux ro>
dic 03 03:20:03 keos-pc kernel: KERNEL supported cpus:
dic 03 03:20:03 keos-pc kernel:   Intel GenuineIntel
dic 03 03:20:03 keos-pc kernel:   AMD AuthenticAMD
dic 03 03:20:03 keos-pc kernel:   Hygon HygonGenuine
dic 03 03:20:03 keos-pc kernel:   Centaur CentaurHauls
dic 03 03:20:03 keos-pc kernel:   zhaoxin   Shanghai  
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 f>
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE r>
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX r>
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX b>
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX C>
dic 03 03:20:03 keos-pc kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2>
dic 03 03:20:03 keos-pc kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3>
dic 03 03:20:03 keos-pc kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4>
dic 03 03:20:03 keos-pc kernel: x86/fpu: Enabled xstate features 0x1f, context >
dic 03 03:20:03 keos-pc kernel: BIOS-provided physical RAM map:
lines 1-20





















-- Journal begins at Thu 2020-11-05 03:57:31 EST, ends at Thu 2020-12-03 03:24:45 EST. --
dic 03 03:20:03 keos-pc kernel: microcode: microcode updated early to revision 0xde, date = 202>
dic 03 03:20:03 keos-pc kernel: Linux version 5.9.11-arch2-1 (linux@archlinux) (gcc (GCC) 10.2.>
dic 03 03:20:03 keos-pc kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dace6e36>
dic 03 03:20:03 keos-pc kernel: KERNEL supported cpus:
dic 03 03:20:03 keos-pc kernel:   Intel GenuineIntel
dic 03 03:20:03 keos-pc kernel:   AMD AuthenticAMD
dic 03 03:20:03 keos-pc kernel:   Hygon HygonGenuine
dic 03 03:20:03 keos-pc kernel:   Centaur CentaurHauls
dic 03 03:20:03 keos-pc kernel:   zhaoxin   Shanghai  
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point re>
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
dic 03 03:20:03 keos-pc kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
dic 03 03:20:03 keos-pc kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
dic 03 03:20:03 keos-pc kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
dic 03 03:20:03 keos-pc kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
dic 03 03:20:03 keos-pc kernel: x86/fpu: Enabled xstate features 0x1f, context size is 960 byte>
dic 03 03:20:03 keos-pc kernel: BIOS-provided physical RAM map:
lines 1-20

[keos@keos-pc ~]$ inxi -G
Graphics:
  Device-1: Intel UHD Graphics 620 driver: i915 v: kernel 
  Device-2: Realtek Integrated_Webcam_HD type: USB driver: uvcvideo 
  Display: x11 server: X.Org 1.20.10 driver: intel 
  unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
[keos@keos-pc ~]$ 

[keos@keos-pc ~]$ uname -a
Linux keos-pc 5.9.11-arch2-1 #1 SMP PREEMPT Sat, 28 Nov 2020 02:07:22 +0000 x86_64 GNU/Linux
[keos@keos-pc ~]$ 


Thank for your help …

The same thing is happening for me too. I update once a day and run the latest kernel.
I was thinking it may be related to my NVIDIA card, but I use the nouveau driver. Usually a restart will get me to the Plasma SDDM login screen. But today I had to use the BTRFS snapshot taken before my last update to be able to boot up properly after many hard resets did not work.
Graphics: Device-1: NVIDIA GP108 [GeForce GT 1030] driver: nouveau v: kernel
Display: x11 server: X.Org 1.20.10 driver: modesetting unloaded: fbdev,vesa
resolution: 1920x1080~60Hz
Message: Unable to show advanced data. Required tool glxinfo missing.
My system is only 18 months old.

guessing … maybe I’m missing some firmware?
I install firmware manager but I don’t know what else to do here…


Any ideas before uninstalling Endeavouros? Tahnks.

Same here. Having to do (sometimes multiple) reboots to get GDM/Gnome to start. Running latest Xen kernel (LTS made no difference) and Nvidia proprietary drivers.

Yesterdays Xorg update (I think!) made the system completely un-bootable. I can get in on TTY2

Could someone help me provide Xorg logs (or any others which may be useful) from the command line??

Thanks

systemctl --failed
journalctl -p3 -xb
grep -iE "\(EE\)|\(WW\)|error|failed" /var/log/Xorg.0.log

Knock yourself out, hope it helps :slight_smile:
3rd one is xorg from current boot

1 Like

Thanks.

Isn’t here a clever way of uploading them from command line to somewhere online as I’m stuck in TTY and can’t copy/paste into a reply

Yeah i’ve not really used it, but according to our forum here, just append this bit to command:

 | curl -F 'f:1=<-' ix.io
1 Like

Brilliant. Thats what I was thinking of.

1 Like

Before uninstalling the system I tried — guessing, because I don’t know what I did — the commands given here in the previous post, at the terminal (giving ‘enter’ to everything) now the screen still comes in black anyway, but after two seconds the system opens.

Will it be fixed? …

If you don’t know more about me, it’s because I had to uninstall it. If it work …

Any way thanks everyone.

OK, the logs produced from the commands above didn’t really show anything of interest

the full xorg log showed no displays detected.

after much bumbling around (and heading rapidly towards a reinstall) I found nvidia-installer-dkms

I had originally been using the nvidia dkms driver, however downloading and running nvidia-installer-dkms has fixed things and I’m back up and running

thanks everyone :slight_smile:

Keith

1 Like

Is it possible that it is the xf86-video-intel causing these issues?

I re-installed EOS, and I ran into something like this, I think I found a solution that worked for me anyway,

I went into the bios and removed every entry in the startup list (where you see what system boot first if dual-boot), and created an entry manually, pointed at ‘efi/grub’ instead of ‘efi/eos’.

I has booted fine a few times so far, I’m not making promises thou xD.

I have an older laptop, I’m gonna install EOS there and try to see if something breaks at install / grub stuff.

Laters

Edit: nope, after a few more sessions, it went back to black screening. Sorry, I thought it worked for good.

I feel obliged - since this was a good community where you always helped me a lot - to tell you that yesterday I reinstalled the system again and today it broke again … a black screen. I give up.
Greetings to all. Merry Christmas!.

Not sure if it’s the same issue but I sometimes boot to a black screen and just do ctrl+alt+f2 then ctrl+alt+f1 and then I get the login screen. might at least get you to the desktop, I haven’t been bothered enough to reallly try to fix it.