# First time install hanging

**URL:** <https://forum.endeavouros.com/t/first-time-install-hanging/51901>\
**Category:** Newbie\
**Created:** [March 5, 2024, 3:10am UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901 "2024-03-05T03:10:09Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 5, 2024, 3:10am UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/1 "2024-03-05T03:10:09Z")

</div>

I’ve tried to install endeavour for the first time. I was previously stuck on “Reached target Graphic interface” but found the answer in these forms!  
I’m currently stuck on “Finished Notify about reboot on special conditions…”… I’ve down grades mesa from 24.02 to 23.3.2-2 [From this thread](https://forum.endeavouros.com/t/update-issues-with-mesa-and-xf86-video-intel/49513) . While looking at the inxi -FAZ I noticed my graphics driver was set to N/A

 ![image](https://forum.endeavouros.com/uploads/default/original/3X/d/a/da67ed0dbcc65a4561b968a98a92e14995427629.jpeg)

I found another [Thread](https://forum.endeavouros.com/t/how-to-correctly-install-my-nvidia-drivers-with-nvidia-inst/36721) about install driver but am unable to fetch drivers from url. I am unsure how to proceed.

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [March 5, 2024, 3:16am UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/2 "2024-03-05T03:16:14Z")

</div>

Your graphics driver is probably “N/A” because the graphical environment never loaded.

Check your journalctl and X11 logs to see what is failing.

> [@svalinn](#):
>
> I’ve down grades mesa from 24.02 to 23.3.2-2 [From this thread](https://forum.endeavouros.com/t/update-issues-with-mesa-and-xf86-video-intel/49513) .

That is an old issue that doesn’t apply to you.

What does `pacman -Q | grep -E "nvidia|mesa"` show?

---

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 5, 2024, 3:24am UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/3 "2024-03-05T03:24:25Z")

</div>

It shows

 ![image](https://forum.endeavouros.com/uploads/default/original/3X/7/b/7b4a6e3af287d9babc1f3bc5e9b03d942f4bab10.jpeg)

I’m not 100% sure what I’m looking for in the journal but this caught my eye

 ![image](https://forum.endeavouros.com/uploads/default/original/3X/4/b/4ba95e229b8a41e39e971a17f4075c30f81f7c4b.jpeg)

---

<div class="post-metadata">

**Author:** ![manuel](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/manuel/32/396_2.png) [@manuel](https://forum.endeavouros.com/u/manuel)\
**Post date:** [March 6, 2024, 12:09am UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/4 "2024-03-06T00:09:36Z")

</div>

For the record, please show the returned address from command

```auto
cat /var/log/Xorg.0.log | eos-sendlog

```

---

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 6, 2024, 2:10pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/5 "2024-03-06T14:10:01Z")

</div>

Those logs do not exist.

---

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 7, 2024, 2:08pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/6 "2024-03-07T14:08:40Z")

</div>

Couldn’t figure out what was wrong. I decided to reinstall and start fresh. I’m unable to install systemd-boot

[https://termbin.com/jd2j](https://termbin.com/jd2j)

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [March 7, 2024, 2:18pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/7 "2024-03-07T14:18:17Z")

</div>

It looks like pacman actually crashed during your install. I have never seen that before.

I would wonder if there is some kind of hardware issue.

However, I would probably just try the install again and see if it fails or not.

---

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 7, 2024, 5:18pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/8 "2024-03-07T17:18:04Z")

</div>

No luck. Got to bootloader and failed again followed by a offline install that failed at “unsquashfs” Signal.SIGHUP.

Is this a sign the ssd is failing?

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [March 7, 2024, 5:22pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/9 "2024-03-07T17:22:06Z")

</div>

It might be a failing disk or memory.

How much RAM do you have?

---

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 7, 2024, 6:00pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/10 "2024-03-07T18:00:26Z")

</div>

32GB, brand new just purchased 2-3 weeks ago.

Here is the latest log on another failed attempt.

[https://termbin.com/npne](https://termbin.com/npne)

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [March 7, 2024, 6:01pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/11 "2024-03-07T18:01:51Z")

</div>

Yeah, that is plenty 😅

If it is new, I would definitely test it though. It isn’t uncommon for new RAM to be defective out of the box.

---

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 7, 2024, 6:17pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/12 "2024-03-07T18:17:35Z")

</div>

Everything was working fine on the previous windows 11 OS.

Is it possible to install memtest on the live iso to test it?

---

<div class="post-metadata">

**Author:** ![svalinn](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/s/e99b99/32.png) [@svalinn](https://forum.endeavouros.com/u/svalinn)\
**Post date:** [March 8, 2024, 5:57pm UTC](https://forum.endeavouros.com/t/first-time-install-hanging/51901/13 "2024-03-08T17:57:53Z")

</div>

Finally got it to reinstall. Unable to use eos-sendlog some issue with Gtk-warning cant open display. Is that because x server isn’t able to start?

Logs for X server ( sorry if this isn’t requested format trying to work with what I was able to get running on the computer 😃 )  
[xorg.log](https://pastebin.com/djACSYhm)
