Co pownienem wybrać ze sterowników podczas instalcji

Używam Linux Mint wiec to moje INXI.
System:

System:
  Host: marcin-Lenovo-ideapad-330-15IKB Kernel: 5.15.0-52-generic x86_64
    bits: 64 Desktop: Xfce 4.16.0 Distro: Linux Mint 21 Vanessa
Machine:
  Type: Laptop System: LENOVO product: 81DE v: Lenovo ideapad 330-15IKB
    serial: <superuser required>
  Mobo: LENOVO model: LNVNB161216 v: SDK0J40700 WIN
    serial: <superuser required> UEFI: LENOVO v: 8TCN49WW date: 10/16/2018
Battery:
  ID-1: BAT0 charge: 31.3 Wh (100.0%) condition: 31.3/30.6 Wh (102.3%)
CPU:
  Info: dual core model: Intel Core i3-8130U bits: 64 type: MT MCP cache:
    L2: 512 KiB
  Speed (MHz): avg: 838 min/max: 400/3400 cores: 1: 900 2: 855 3: 800
    4: 800
Graphics:
  Device-1: Intel UHD Graphics 620 driver: i915 v: kernel
  Device-2: AMD Topaz XT [Radeon R7 M260/M265 / M340/M360 M440/M445 530/535
    620/625 Mobile]
    driver: amdgpu v: kernel
  Device-3: Chicony EasyCamera type: USB driver: uvcvideo
  Display: x11 server: X.Org v: 1.21.1.3 driver: X:
    loaded: amdgpu,ati,modesetting unloaded: fbdev,vesa gpu: i915
    resolution: 1920x1080~60Hz
  OpenGL: renderer: Mesa Intel UHD Graphics 620 (KBL GT2)
    v: 4.6 Mesa 22.0.5
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio driver: snd_hda_intel
  Sound Server-1: ALSA v: k5.15.0-52-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    driver: r8169
  IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: e8:6a:64:57:d3:f7
  Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
    driver: ath10k_pci
  IF: wlp3s0 state: down mac: f8:a2:d6:b3:76:07
Bluetooth:
  Device-1: Qualcomm Atheros type: USB driver: btusb
  Report: hciconfig ID: hci0 rfk-id: 2 state: down
    bt-service: enabled,running rfk-block: hardware: no software: yes
    address: F8:A2:D6:B3:76:08
Drives:
  Local Storage: total: 253.13 GiB used: 23.17 GiB (9.2%)
  ID-1: /dev/sda vendor: Silicon Power model: SPCC Solid State Disk
    size: 238.47 GiB
  ID-2: /dev/sdb type: USB vendor: Kingston model: DataTraveler 3.0
    size: 14.65 GiB
Partition:
  ID-1: / size: 233.18 GiB used: 23.16 GiB (9.9%) fs: ext4 dev: /dev/sda2
  ID-2: /boot/efi size: 511 MiB used: 5.2 MiB (1.0%) fs: vfat
    dev: /dev/sda1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) file: /swapfile
Sensors:
  System Temperatures: cpu: 41.0 C pch: 36.5 C mobo: N/A gpu: amdgpu
    temp: 34.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 234 Uptime: 2h 0m Memory: 3.74 GiB used: 1.43 GiB (38.2%)
  Shell: Bash inxi: 3.3.13

UEFI Default

Ale np Xf86-video- ati to moge pominąć/odnzaczyć ? I wybrac driver do Ethernet r8169 ?

sterownik wideo i tak zostanie usunięty, jeśli nie będzie pasował do twojego sprzętu później w procesie instalacji.
Jeśli:

Sieć: Urządzenie-1: Sterownik Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet: r8169

działa nie musisz zmieniać na r8168, gdy pojawi się prośba, możesz pozostać przy domyślnym r8169 w przypadku, gdy internet nie działa z domyślnym, może być starszy 8168 lepiej użyć…


–english–
video driver will get removed anyway if they do not fit your hardware later in the installation process.

If:

Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    driver: r8169

is working on mint you do not need to change to r8168 when it asks for you can stay with default r8169 in case internet is not working with the default one it can be the older 8168 is better to use…

1 Like

OK :slight_smile:

1 Like