Cannot connect second monitor

nlea · January 29, 2023, 8:42pm

Hello community ,

I am new and I just installed EndeavourOS with Cinnamon. Everything seems good but as soon as I connect my second monitor everything freezes. The second monitor is just showing random stripes. I can still move the mouse but windows are not clickable and I can’t use the keyboard.

During the installation process with Casini the two monitors worked fine. Just the resolution in the laptop’s monitor where super small and could not be changed.

Does someone has an idea, what could be the cause and how to handle it?

Thanks

ricklinux · January 29, 2023, 8:45pm

Welcome @nlea
Is it possible for you to post your hardware? That would be helpful for those trying to help you. Please post the url link from this command.

inxi -Faz | eos-sendlog

Edit: Did you try going into display and checking anything there to set extended or mirror?

nlea · January 29, 2023, 10:11pm

hey @ricklinux ,

thanks for your reply. This is the link to the hardware I use: https://0x0.st/oFyU.txt

I can’t go into the Settings for the Displays. As soon as I connect the second monitor, I can still move the mouse courser but can’t select anything and the keyboard won’t work neither. So with the second monitor connected I can’t run any commands in the terminal etc

ricklinux · January 29, 2023, 10:16pm

So this is a laptop Dell XPS 9320. How is the other monitor connected?

Edit: Is it connected with USB-C to Display Port?

nlea · January 30, 2023, 8:07am

It is connected via HDMI cable using an adapter to connect to the usb-c. It worked fine on Fedora before as well as during the installation set up with Cassini…

ricklinux · January 30, 2023, 2:35pm

Your hardware output shows this. Was the external monitor connected when you ran that command?

Monitor-1: eDP-1 mapped: eDP1 model: Sharp 0x1551 built: 2021
    res: 3840x2400 hz: 60 dpi: 336 gamma: 1.2 size: 290x180mm (11.42x7.09")
    diag: 340mm (13.4") ratio: 16:10 modes: 3840x2400

You would have to start looking at hardware information from logs to see what it shows unplugged and then plugged in. Other than trying another type of cable i don’t have an answer. Does the monitor have display port also? There are cables that are usb-c to hdmi or display port so you wouldn’t be using an adapter also. It worked on live ISO and Fedora? Have seen this before where things work on live ISO but then not when installed. It does happen with some hardware.

Also maybe you can give some logs with it plugged in on boot and without it plugged in on boot.
For both you could run

sudo dmesg | eos-sendlog

journalctl -b -0 | eos-sendlog

Could i see the output of these. You will have to post the output for these ones and use code tags around what you post.

lspci

lsusb

Other than this i don’t have an outright answer to say do this and it will work.

nlea · January 31, 2023, 3:54pm

Hey @ricklinux ,

Thanks for your help and sorry for the slow replying.

No it was not. As said above as soon as I connect the monitor I can’t use my keyboard and I also can’t select and click on anything in the UI. I can just move the mouse around. So it it kind of impossible to connect it to the second monitor and run commands in the terminal.

The one monitor at home does not have it but the one I have in the office does. Connecting to different monitors with different cables and the behavior stays the same…

And yes it worked before on Fedora and live ISO…

I can post the logs without being connected to the monitor due to mentioned issue above:

sudo dmesg | eos-sendlog
https://0x0.st/oFUc.txt

journalctl -b -0 | eos-sendlog
https://0x0.st/oFUu.txt

lspci


00:00.0 Host bridge: Intel Corporation Device 4621 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-P Integrated Graphics Controller (rev 0c)
00:04.0 Signal processing controller: Intel Corporation Alder Lake Innovation Platform Framework Processor Participant (rev 02)
00:05.0 Multimedia controller: Intel Corporation Device 465d (rev 02)
00:06.0 PCI bridge: Intel Corporation 12th Gen Core Processor PCI Express x4 Controller #0 (rev 02)
00:07.0 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #0 (rev 02)
00:07.2 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #2 (rev 02)
00:08.0 System peripheral: Intel Corporation 12th Gen Core Processor Gaussian & Neural Accelerator (rev 02)
00:0d.0 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 USB Controller (rev 02)
00:0d.2 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 NHI #0 (rev 02)
00:0d.3 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 NHI #1 (rev 02)
00:12.0 Serial controller: Intel Corporation Alder Lake-P Integrated Sensor Hub (rev 01)
00:14.0 USB controller: Intel Corporation Alder Lake PCH USB 3.2 xHCI Host Controller (rev 01)
00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01)
00:14.3 Network controller: Intel Corporation Alder Lake-P PCH CNVi WiFi (rev 01)
00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #0 (rev 01)
00:15.1 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #1 (rev 01)
00:16.0 Communication controller: Intel Corporation Alder Lake PCH HECI Controller (rev 01)
00:1e.0 Communication controller: Intel Corporation Alder Lake PCH UART #0 (rev 01)
00:1e.3 Serial bus controller: Intel Corporation Device 51ab (rev 01)
00:1f.0 ISA bridge: Intel Corporation Alder Lake PCH eSPI Controller (rev 01)
00:1f.3 Multimedia audio controller: Intel Corporation Alder Lake PCH-P High Definition Audio Controller (rev 01)
00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller (rev 01)
00:1f.5 Serial bus controller: Intel Corporation Alder Lake-P PCH SPI Controller (rev 01)
01:00.0 Non-Volatile memory controller: SK hynix Device 1959

lsusb

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 27c6:63bc Shenzhen Goodix Technology Co.,Ltd. Goodix USB2.0 MISC
Bus 003 Device 002: ID 8086:0b63 Intel Corp. USB Bridge
Bus 003 Device 004: ID 8087:0033 Intel Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

If you have an idea where the problem could set let me know. Thanks so much

ricklinux · January 31, 2023, 4:58pm

Hardware looks okay I don’t see anything that shows a problem. If you can’t get a log when it’s plugged in then we can’t see what is happening.

I do know that most laptops are designed to support uscb-c to display port. Does your monitor have a display port input?

[    0.279740] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
[    0.279740] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+

I’m not sure if hooking it to a usb-c to display port would solve the issue. But your monitor would have to have a display port input. Otherwise you would be having to get a usb-c to display port cable and then an adapter to fit the monitor for whatever port it is? If it’s only hdmi or dvi or vga?

I don’t know what to suggest really. I don’t want to suggest you buy asomething if it’s not going to work. But unfortunately how can you troubleshoot it?

Have you tried another hdmi cable. Also have you tried hooking it to the other usb-c port? I’m not sure if there is a designated usb-c for this?

Edit: The other thing you could try is hooking it up and run it on the live ISO and get the log with it hooked to the monitor if it works this way.

inxi -Faz | eos-sendlog

sudo dmesg | eos-sendlog

journalctl -b -0 | eos-sendlog

I could look at these but I’m not sure it will help me.

petsam · January 31, 2023, 7:20pm

But we need the logs when breaking.
You can get logs from the previous (broken) boot, with

journalctl -b -1 --no-hostname --no-pager
cat /var/log/Xorg.0.log.old

ricklinux · January 31, 2023, 7:30pm

So what you mean is connect it and boot and it will fail. Then disconnect it and boot and run the commands to get the logs needed?

ricklinux · January 31, 2023, 7:54pm

Hopefully the OP reads this and provides the logs. I’m not sure what’s happening as it worked on the live ISO and another distro so maybe it is setting an improper xorg .conf or something on the install? I really don’t know. I don’t use multi monitor much although i have helped some here to fix some issues like this.

nlea · February 1, 2023, 9:04am

Hey both of you,

So I ran the command to extract the old log and it is indeed interesting. It is quiet long, so I can’t post the complete thing from the first command. This is anyhow the second one

cat /var/log/Xorg.0.log.old

[    11.737] 
X.Org X Server 1.21.1.6
X Protocol Version 11, Revision 0
[    11.737] Current Operating System: Linux nlea-xps9320 6.1.8-arch1-1 #1 SMP PREEMPT_DYNAMIC Tue, 24 Jan 2023 21:07:04 +0000 x86_64
[    11.737] Kernel command line: initrd=\e8c3f90ce578424fabfab4a08346f992\6.1.8-arch1-1\initrd nvme_load=YES rw root=UUID=95513f4d-5dd3-41f4-9619-2e1ed76a6411 systemd.machine_id=e8c3f90ce578424fabfab4a08346f992
[    11.737]  
[    11.737] Current version of pixman: 0.42.2
[    11.737] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    11.737] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.737] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb  1 09:35:11 2023
[    11.737] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.737] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.738] (==) No Layout section.  Using the first Screen section.
[    11.738] (==) No screen section available. Using defaults.
[    11.738] (**) |-->Screen "Default Screen Section" (0)
[    11.738] (**) |   |-->Monitor "<default monitor>"
[    11.738] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    11.738] (==) Automatically adding devices
[    11.738] (==) Automatically enabling devices
[    11.738] (==) Automatically adding GPU devices
[    11.738] (==) Automatically binding GPU devices
[    11.738] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    11.738] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    11.738] 	Entry deleted from font path.
[    11.738] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
[    11.738] 	Entry deleted from font path.
[    11.738] 	(Run 'mkfontdir' on "/usr/share/fonts/TTF").
[    11.738] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    11.738] 	Entry deleted from font path.
[    11.738] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    11.738] 	Entry deleted from font path.
[    11.738] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    11.738] 	Entry deleted from font path.
[    11.738] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    11.738] 	Entry deleted from font path.
[    11.738] (==) FontPath set to:
	
[    11.738] (==) ModulePath set to "/usr/lib/xorg/modules"
[    11.738] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.738] (II) Module ABI versions:
[    11.738] 	X.Org ANSI C Emulation: 0.4
[    11.738] 	X.Org Video Driver: 25.2
[    11.738] 	X.Org XInput driver : 24.4
[    11.738] 	X.Org Server Extension : 10.0
[    11.738] (++) using VT number 7

[    11.738] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    11.739] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.739] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[    11.747] (--) PCI:*(0@0:2:0) 8086:46a6:1028:0af3 rev 12, Mem @ 0x603d000000/16777216, 0x4000000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[    11.747] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    11.747] (II) LoadModule: "glx"
[    11.747] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    11.750] (II) Module glx: vendor="X.Org Foundation"
[    11.750] 	compiled for 1.21.1.6, module version = 1.0.0
[    11.750] 	ABI class: X.Org Server Extension, version 10.0
[    11.750] (==) Matched intel as autoconfigured driver 0
[    11.750] (==) Matched modesetting as autoconfigured driver 1
[    11.750] (==) Matched fbdev as autoconfigured driver 2
[    11.750] (==) Matched vesa as autoconfigured driver 3
[    11.750] (==) Assigned the driver to the xf86ConfigLayout
[    11.750] (II) LoadModule: "intel"
[    11.750] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    11.751] (II) Module intel: vendor="X.Org Foundation"
[    11.751] 	compiled for 1.21.1.1, module version = 2.99.917
[    11.751] 	Module class: X.Org Video Driver
[    11.751] 	ABI class: X.Org Video Driver, version 25.2
[    11.751] (II) LoadModule: "modesetting"
[    11.751] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    11.752] (II) Module modesetting: vendor="X.Org Foundation"
[    11.752] 	compiled for 1.21.1.6, module version = 1.21.1
[    11.752] 	Module class: X.Org Video Driver
[    11.752] 	ABI class: X.Org Video Driver, version 25.2
[    11.752] (II) LoadModule: "fbdev"
[    11.752] (WW) Warning, couldn't open module fbdev
[    11.752] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    11.752] (II) LoadModule: "vesa"
[    11.752] (WW) Warning, couldn't open module vesa
[    11.752] (EE) Failed to load module "vesa" (module does not exist, 0)
[    11.752] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    11.752] (II) intel: Driver for Intel(R) HD Graphics
[    11.752] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    11.752] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    11.752] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    11.769] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[    11.769] (II) intel(0): SNA compiled from 2.99.917-916-g31486f40
[    11.769] (WW) Falling back to old probe method for modesetting
[    11.770] (WW) intel(0): Unknown chipset
[    11.770] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 12 threads
[    11.770] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    11.770] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    11.770] (==) intel(0): RGB weight 888
[    11.770] (==) intel(0): Default visual is TrueColor
[    11.770] (II) intel(0): Output eDP1 has no monitor section
[    11.770] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[    11.770] (II) intel(0): Enabled output eDP1
[    11.770] (II) intel(0): Output DP1 has no monitor section
[    11.770] (II) intel(0): Enabled output DP1
[    11.770] (II) intel(0): Output DP2 has no monitor section
[    11.770] (II) intel(0): Enabled output DP2
[    11.770] (II) intel(0): Output DP3 has no monitor section
[    11.770] (II) intel(0): Enabled output DP3
[    11.770] (II) intel(0): Output DP4 has no monitor section
[    11.770] (II) intel(0): Enabled output DP4
[    11.770] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    11.770] (II) intel(0): Output VIRTUAL1 has no monitor section
[    11.770] (II) intel(0): Enabled output VIRTUAL1
[    11.771] (--) intel(0): Output eDP1 using initial mode 3840x2400 on pipe 0
[    11.771] (--) intel(0): Output DP1 using initial mode 3840x2160 on pipe 1
[    11.771] (==) intel(0): TearFree enabled
[    11.771] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    11.771] (==) intel(0): DPI set to (96, 96)
[    11.771] (II) Loading sub module "dri3"
[    11.771] (II) LoadModule: "dri3"
[    11.771] (II) Module "dri3" already built-in
[    11.771] (II) Loading sub module "dri2"
[    11.771] (II) LoadModule: "dri2"
[    11.771] (II) Module "dri2" already built-in
[    11.771] (II) Loading sub module "present"
[    11.771] (II) LoadModule: "present"
[    11.771] (II) Module "present" already built-in
[    11.771] (II) UnloadModule: "modesetting"
[    11.771] (II) Unloading modesetting
[    11.771] (II) intel(0): SNA initialized with generic backend
[    11.771] (==) intel(0): Backing store enabled
[    11.771] (==) intel(0): Silken mouse enabled
[    11.771] (II) intel(0): HW Cursor enabled
[    11.771] (==) intel(0): DPMS enabled
[    11.771] (==) intel(0): Display hotplug detection enabled
[    11.771] (II) intel(0): Textured video not supported on this hardware or backend
[    11.772] (II) intel(0): [DRI2] Setup complete
[    11.772] (II) intel(0): [DRI2]   DRI driver: i965
[    11.772] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    11.772] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    11.772] (II) intel(0): hardware support for Present enabled
[    11.772] (II) Initializing extension Generic Event Extension
[    11.772] (II) Initializing extension SHAPE
[    11.772] (II) Initializing extension MIT-SHM
[    11.772] (II) Initializing extension XInputExtension
[    11.772] (II) Initializing extension XTEST
[    11.772] (II) Initializing extension BIG-REQUESTS
[    11.772] (II) Initializing extension SYNC
[    11.772] (II) Initializing extension XKEYBOARD
[    11.772] (II) Initializing extension XC-MISC
[    11.772] (II) Initializing extension SECURITY
[    11.772] (II) Initializing extension XFIXES
[    11.772] (II) Initializing extension RENDER
[    11.772] (II) Initializing extension RANDR
[    11.772] (II) Initializing extension COMPOSITE
[    11.772] (II) Initializing extension DAMAGE
[    11.772] (II) Initializing extension MIT-SCREEN-SAVER
[    11.773] (II) Initializing extension DOUBLE-BUFFER
[    11.773] (II) Initializing extension RECORD
[    11.773] (II) Initializing extension DPMS
[    11.773] (II) Initializing extension Present
[    11.773] (II) Initializing extension DRI3
[    11.773] (II) Initializing extension X-Resource
[    11.773] (II) Initializing extension XVideo
[    11.773] (II) Initializing extension XVideo-MotionCompensation
[    11.773] (II) Initializing extension GLX
[    11.773] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[    11.773] (EE) AIGLX error: unable to load driver i965
[    11.830] (II) IGLX: Loaded and initialized swrast
[    11.830] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    11.830] (II) Initializing extension XFree86-VidModeExtension
[    11.830] (II) Initializing extension XFree86-DGA
[    11.830] (II) Initializing extension XFree86-DRI
[    11.830] (II) Initializing extension DRI2
[    11.837] (EE) intel(0): Failed to submit rendering commands (Invalid argument), disabling acceleration.
[    11.837] (II) intel(0): switch to mode 3840x2400@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[    11.846] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[    11.863] (II) intel(0): Setting screen physical size to 1016 x 635
[    11.898] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    11.898] (**) Video Bus: Applying InputClass "devname"
[    11.898] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    11.898] (**) Video Bus: Applying InputClass "system-keyboard"
[    11.898] (II) LoadModule: "libinput"
[    11.898] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    11.900] (II) Module libinput: vendor="X.Org Foundation"
[    11.900] 	compiled for 1.21.1.3, module version = 1.2.1
[    11.900] 	Module class: X.Org XInput Driver
[    11.900] 	ABI class: X.Org XInput driver, version 24.4
[    11.900] (II) Using input driver 'libinput' for 'Video Bus'
[    11.900] (**) Video Bus: always reports core events
[    11.900] (**) Option "Device" "/dev/input/event13"
[    11.901] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[    11.901] (II) event13 - Video Bus: device is a keyboard
[    11.901] (II) event13 - Video Bus: device removed
[    11.987] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event13"
[    11.987] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    11.987] (**) Option "xkb_layout" "us"
[    11.987] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[    11.987] (II) event13 - Video Bus: device is a keyboard
[    11.987] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    11.987] (**) Power Button: Applying InputClass "devname"
[    11.987] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    11.987] (**) Power Button: Applying InputClass "system-keyboard"
[    11.987] (II) Using input driver 'libinput' for 'Power Button'
[    11.987] (**) Power Button: always reports core events
[    11.987] (**) Option "Device" "/dev/input/event1"
[    11.988] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    11.988] (II) event1  - Power Button: device is a keyboard
[    11.988] (II) event1  - Power Button: device removed
[    12.040] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    12.040] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    12.040] (**) Option "xkb_layout" "us"
[    12.044] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    12.044] (II) event1  - Power Button: device is a keyboard
[    12.044] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    12.044] (**) Lid Switch: Applying InputClass "devname"
[    12.044] (II) Using input driver 'libinput' for 'Lid Switch'
[    12.044] (**) Lid Switch: always reports core events
[    12.044] (**) Option "Device" "/dev/input/event0"
[    12.044] (II) event0  - Lid Switch: is tagged by udev as: Switch
[    12.044] (II) event0  - Lid Switch: device is a switch device
[    12.045] (II) event0  - Lid Switch: device removed
[    12.064] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0/event0"
[    12.064] (II) XINPUT: Adding extended input device "Lid Switch" (type: KEYBOARD, id 8)
[    12.064] (II) event0  - Lid Switch: is tagged by udev as: Switch
[    12.064] (II) event0  - Lid Switch: device is a switch device
[    12.064] (II) config/udev: Adding input device Logitech G403 HERO Gaming Mouse (/dev/input/event3)
[    12.064] (**) Logitech G403 HERO Gaming Mouse: Applying InputClass "devname"
[    12.064] (**) Logitech G403 HERO Gaming Mouse: Applying InputClass "libinput pointer catchall"
[    12.064] (II) Using input driver 'libinput' for 'Logitech G403 HERO Gaming Mouse'
[    12.064] (**) Logitech G403 HERO Gaming Mouse: always reports core events
[    12.064] (**) Option "Device" "/dev/input/event3"
[    12.125] (II) event3  - Logitech G403 HERO Gaming Mouse: is tagged by udev as: Mouse
[    12.125] (II) event3  - Logitech G403 HERO Gaming Mouse: device set to 800 DPI
[    12.125] (II) event3  - Logitech G403 HERO Gaming Mouse: device is a pointer
[    12.125] (II) event3  - Logitech G403 HERO Gaming Mouse: device removed
[    12.207] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:046D:C08F.0003/input/input4/event3"
[    12.207] (II) XINPUT: Adding extended input device "Logitech G403 HERO Gaming Mouse" (type: MOUSE, id 9)
[    12.207] (**) Option "AccelerationScheme" "none"
[    12.207] (**) Logitech G403 HERO Gaming Mouse: (accel) selected scheme none/0
[    12.207] (**) Logitech G403 HERO Gaming Mouse: (accel) acceleration factor: 2.000
[    12.207] (**) Logitech G403 HERO Gaming Mouse: (accel) acceleration threshold: 4
[    12.267] (II) event3  - Logitech G403 HERO Gaming Mouse: is tagged by udev as: Mouse
[    12.267] (II) event3  - Logitech G403 HERO Gaming Mouse: device set to 800 DPI
[    12.267] (II) event3  - Logitech G403 HERO Gaming Mouse: device is a pointer
[    12.269] (II) config/udev: Adding input device Logitech G403 HERO Gaming Mouse (/dev/input/mouse0)
[    12.269] (**) Logitech G403 HERO Gaming Mouse: Applying InputClass "devname"
[    12.269] (II) Using input driver 'libinput' for 'Logitech G403 HERO Gaming Mouse'
[    12.269] (**) Logitech G403 HERO Gaming Mouse: always reports core events
[    12.269] (**) Option "Device" "/dev/input/mouse0"
[    12.334] (II) mouse0  - not using input device '/dev/input/mouse0'.
[    12.334] (EE) libinput: Logitech G403 HERO Gaming Mouse: Failed to create a device for /dev/input/mouse0
[    12.334] (EE) PreInit returned 2 for "Logitech G403 HERO Gaming Mouse"
[    12.334] (II) UnloadModule: "libinput"
[    12.336] (II) config/udev: Adding input device Logitech G403 HERO Gaming Mouse Keyboard (/dev/input/event4)
[    12.336] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "devname"
[    12.336] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    12.336] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "system-keyboard"
[    12.336] (II) Using input driver 'libinput' for 'Logitech G403 HERO Gaming Mouse Keyboard'
[    12.336] (**) Logitech G403 HERO Gaming Mouse Keyboard: always reports core events
[    12.336] (**) Option "Device" "/dev/input/event4"
[    12.339] (II) event4  - Logitech G403 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    12.339] (II) event4  - Logitech G403 HERO Gaming Mouse Keyboard: device is a keyboard
[    12.339] (II) event4  - Logitech G403 HERO Gaming Mouse Keyboard: device removed
[    12.404] (II) libinput: Logitech G403 HERO Gaming Mouse Keyboard: needs a virtual subdevice
[    12.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C08F.0004/input/input5/event4"
[    12.404] (II) XINPUT: Adding extended input device "Logitech G403 HERO Gaming Mouse Keyboard" (type: MOUSE, id 10)
[    12.404] (**) Option "AccelerationScheme" "none"
[    12.404] (**) Logitech G403 HERO Gaming Mouse Keyboard: (accel) selected scheme none/0
[    12.404] (**) Logitech G403 HERO Gaming Mouse Keyboard: (accel) acceleration factor: 2.000
[    12.404] (**) Logitech G403 HERO Gaming Mouse Keyboard: (accel) acceleration threshold: 4
[    12.406] (II) event4  - Logitech G403 HERO Gaming Mouse Keyboard: is tagged by udev as: Keyboard
[    12.406] (II) event4  - Logitech G403 HERO Gaming Mouse Keyboard: device is a keyboard
[    12.407] (II) config/udev: Adding input device Apple Inc. Magic Keyboard with Numeric Keypad (/dev/input/event6)
[    12.407] (**) Apple Inc. Magic Keyboard with Numeric Keypad: Applying InputClass "devname"
[    12.407] (II) Using input driver 'libinput' for 'Apple Inc. Magic Keyboard with Numeric Keypad'
[    12.407] (**) Apple Inc. Magic Keyboard with Numeric Keypad: always reports core events
[    12.407] (**) Option "Device" "/dev/input/event6"
[    12.467] (II) event6  - Apple Inc. Magic Keyboard with Numeric Keypad: not tagged as supported input device
[    12.524] (II) event6  - not using input device '/dev/input/event6'.
[    12.524] (EE) libinput: Apple Inc. Magic Keyboard with Numeric Keypad: Failed to create a device for /dev/input/event6
[    12.524] (EE) PreInit returned 2 for "Apple Inc. Magic Keyboard with Numeric Keypad"
[    12.524] (II) UnloadModule: "libinput"
[    12.526] (II) config/udev: Adding input device Apple Inc. Magic Keyboard with Numeric Keypad (/dev/input/event5)
[    12.526] (**) Apple Inc. Magic Keyboard with Numeric Keypad: Applying InputClass "devname"
[    12.526] (**) Apple Inc. Magic Keyboard with Numeric Keypad: Applying InputClass "libinput keyboard catchall"
[    12.526] (**) Apple Inc. Magic Keyboard with Numeric Keypad: Applying InputClass "system-keyboard"
[    12.526] (II) Using input driver 'libinput' for 'Apple Inc. Magic Keyboard with Numeric Keypad'
[    12.526] (**) Apple Inc. Magic Keyboard with Numeric Keypad: always reports core events
[    12.526] (**) Option "Device" "/dev/input/event5"
[    12.528] (II) event5  - Apple Inc. Magic Keyboard with Numeric Keypad: is tagged by udev as: Keyboard
[    12.528] (II) event5  - Apple Inc. Magic Keyboard with Numeric Keypad: device is a keyboard
[    12.529] (II) event5  - Apple Inc. Magic Keyboard with Numeric Keypad: device removed
[    12.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.1/0003:05AC:026C.0006/input/input11/event5"
[    12.564] (II) XINPUT: Adding extended input device "Apple Inc. Magic Keyboard with Numeric Keypad" (type: KEYBOARD, id 11)
[    12.564] (**) Option "xkb_layout" "us"
[    12.567] (II) event5  - Apple Inc. Magic Keyboard with Numeric Keypad: is tagged by udev as: Keyboard
[    12.567] (II) event5  - Apple Inc. Magic Keyboard with Numeric Keypad: device is a keyboard
[    12.569] (II) config/udev: Adding input device LXT2021:00 29BD:3303 (/dev/input/event12)
[    12.569] (**) LXT2021:00 29BD:3303: Applying InputClass "devname"
[    12.569] (**) LXT2021:00 29BD:3303: Applying InputClass "libinput touchscreen catchall"
[    12.569] (II) Using input driver 'libinput' for 'LXT2021:00 29BD:3303'
[    12.569] (**) LXT2021:00 29BD:3303: always reports core events
[    12.569] (**) Option "Device" "/dev/input/event12"
[    12.570] (II) event12 - LXT2021:00 29BD:3303: is tagged by udev as: Touchscreen
[    12.570] (II) event12 - LXT2021:00 29BD:3303: device is a touch device
[    12.571] (II) event12 - LXT2021:00 29BD:3303: device removed
[    12.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-9/i2c-LXT2021:00/0018:29BD:3303.0009/input/input29/event12"
[    12.620] (II) XINPUT: Adding extended input device "LXT2021:00 29BD:3303" (type: TOUCHSCREEN, id 12)
[    12.621] (**) Option "AccelerationScheme" "none"
[    12.621] (**) LXT2021:00 29BD:3303: (accel) selected scheme none/0
[    12.621] (**) LXT2021:00 29BD:3303: (accel) acceleration factor: 2.000
[    12.621] (**) LXT2021:00 29BD:3303: (accel) acceleration threshold: 4
[    12.623] (II) event12 - LXT2021:00 29BD:3303: is tagged by udev as: Touchscreen
[    12.624] (II) event12 - LXT2021:00 29BD:3303: device is a touch device
[    12.625] (II) config/udev: Adding input device LXT2021:00 29BD:3303 (/dev/input/mouse3)
[    12.625] (**) LXT2021:00 29BD:3303: Applying InputClass "devname"
[    12.625] (II) Using input driver 'libinput' for 'LXT2021:00 29BD:3303'
[    12.625] (**) LXT2021:00 29BD:3303: always reports core events
[    12.625] (**) Option "Device" "/dev/input/mouse3"
[    12.680] (II) mouse3  - not using input device '/dev/input/mouse3'.
[    12.680] (EE) libinput: LXT2021:00 29BD:3303: Failed to create a device for /dev/input/mouse3
[    12.680] (EE) PreInit returned 2 for "LXT2021:00 29BD:3303"
[    12.680] (II) UnloadModule: "libinput"
[    12.682] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Mouse (/dev/input/event9)
[    12.682] (**) VEN_04F3:00 04F3:31D1 Mouse: Applying InputClass "devname"
[    12.682] (**) VEN_04F3:00 04F3:31D1 Mouse: Applying InputClass "libinput pointer catchall"
[    12.682] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Mouse'
[    12.682] (**) VEN_04F3:00 04F3:31D1 Mouse: always reports core events
[    12.682] (**) Option "Device" "/dev/input/event9"
[    12.685] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: is tagged by udev as: Mouse Pointingstick
[    12.685] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device is a pointer
[    12.686] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device removed
[    12.737] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-VEN_04F3:00/0018:04F3:31D1.0008/input/input25/event9"
[    12.737] (II) XINPUT: Adding extended input device "VEN_04F3:00 04F3:31D1 Mouse" (type: MOUSE, id 13)
[    12.738] (**) Option "AccelerationScheme" "none"
[    12.738] (**) VEN_04F3:00 04F3:31D1 Mouse: (accel) selected scheme none/0
[    12.738] (**) VEN_04F3:00 04F3:31D1 Mouse: (accel) acceleration factor: 2.000
[    12.738] (**) VEN_04F3:00 04F3:31D1 Mouse: (accel) acceleration threshold: 4
[    12.740] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: is tagged by udev as: Mouse Pointingstick
[    12.741] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device is a pointer
[    12.743] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Mouse (/dev/input/mouse1)
[    12.743] (**) VEN_04F3:00 04F3:31D1 Mouse: Applying InputClass "devname"
[    12.743] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Mouse'
[    12.743] (**) VEN_04F3:00 04F3:31D1 Mouse: always reports core events
[    12.743] (**) Option "Device" "/dev/input/mouse1"
[    12.787] (II) mouse1  - not using input device '/dev/input/mouse1'.
[    12.787] (EE) libinput: VEN_04F3:00 04F3:31D1 Mouse: Failed to create a device for /dev/input/mouse1
[    12.787] (EE) PreInit returned 2 for "VEN_04F3:00 04F3:31D1 Mouse"
[    12.787] (II) UnloadModule: "libinput"
[    12.788] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Touchpad (/dev/input/event10)
[    12.788] (**) VEN_04F3:00 04F3:31D1 Touchpad: Applying InputClass "devname"
[    12.788] (**) VEN_04F3:00 04F3:31D1 Touchpad: Applying InputClass "libinput touchpad catchall"
[    12.788] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Touchpad'
[    12.788] (**) VEN_04F3:00 04F3:31D1 Touchpad: always reports core events
[    12.788] (**) Option "Device" "/dev/input/event10"
[    12.790] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: is tagged by udev as: Touchpad
[    12.793] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device is a touchpad
[    12.793] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device removed
[    12.837] (**) Option "Tapping" "on"
[    12.838] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-VEN_04F3:00/0018:04F3:31D1.0008/input/input26/event10"
[    12.838] (II) XINPUT: Adding extended input device "VEN_04F3:00 04F3:31D1 Touchpad" (type: TOUCHPAD, id 14)
[    12.841] (**) Option "AccelerationScheme" "none"
[    12.841] (**) VEN_04F3:00 04F3:31D1 Touchpad: (accel) selected scheme none/0
[    12.841] (**) VEN_04F3:00 04F3:31D1 Touchpad: (accel) acceleration factor: 2.000
[    12.841] (**) VEN_04F3:00 04F3:31D1 Touchpad: (accel) acceleration threshold: 4
[    12.842] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: is tagged by udev as: Touchpad
[    12.843] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device is a touchpad
[    12.843] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Touchpad (/dev/input/mouse2)
[    12.843] (**) VEN_04F3:00 04F3:31D1 Touchpad: Applying InputClass "devname"
[    12.843] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Touchpad'
[    12.843] (**) VEN_04F3:00 04F3:31D1 Touchpad: always reports core events
[    12.843] (**) Option "Device" "/dev/input/mouse2"
[    12.890] (II) mouse2  - not using input device '/dev/input/mouse2'.
[    12.891] (EE) libinput: VEN_04F3:00 04F3:31D1 Touchpad: Failed to create a device for /dev/input/mouse2
[    12.891] (EE) PreInit returned 2 for "VEN_04F3:00 04F3:31D1 Touchpad"
[    12.891] (II) UnloadModule: "libinput"
[    12.892] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 UNKNOWN (/dev/input/event11)
[    12.892] (**) VEN_04F3:00 04F3:31D1 UNKNOWN: Applying InputClass "devname"
[    12.893] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 UNKNOWN'
[    12.893] (**) VEN_04F3:00 04F3:31D1 UNKNOWN: always reports core events
[    12.893] (**) Option "Device" "/dev/input/event11"
[    12.895] (II) event11 - VEN_04F3:00 04F3:31D1 UNKNOWN: not tagged as supported input device
[    12.937] (II) event11 - not using input device '/dev/input/event11'.
[    12.937] (EE) libinput: VEN_04F3:00 04F3:31D1 UNKNOWN: Failed to create a device for /dev/input/event11
[    12.937] (EE) PreInit returned 2 for "VEN_04F3:00 04F3:31D1 UNKNOWN"
[    12.937] (II) UnloadModule: "libinput"
[    12.939] (II) config/udev: Adding input device Intel HID events (/dev/input/event7)
[    12.940] (**) Intel HID events: Applying InputClass "devname"
[    12.940] (**) Intel HID events: Applying InputClass "libinput keyboard catchall"
[    12.940] (**) Intel HID events: Applying InputClass "system-keyboard"
[    12.940] (II) Using input driver 'libinput' for 'Intel HID events'
[    12.940] (**) Intel HID events: always reports core events
[    12.940] (**) Option "Device" "/dev/input/event7"
[    12.942] (II) event7  - Intel HID events: is tagged by udev as: Keyboard
[    12.942] (II) event7  - Intel HID events: device is a keyboard
[    12.942] (II) event7  - Intel HID events: device removed
[    12.957] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input12/event7"
[    12.957] (II) XINPUT: Adding extended input device "Intel HID events" (type: KEYBOARD, id 15)
[    12.957] (**) Option "xkb_layout" "us"
[    12.959] (II) event7  - Intel HID events: is tagged by udev as: Keyboard
[    12.959] (II) event7  - Intel HID events: device is a keyboard
[    12.961] (II) config/udev: Adding input device Intel HID 5 button array (/dev/input/event8)
[    12.961] (**) Intel HID 5 button array: Applying InputClass "devname"
[    12.961] (**) Intel HID 5 button array: Applying InputClass "libinput keyboard catchall"
[    12.961] (**) Intel HID 5 button array: Applying InputClass "system-keyboard"
[    12.961] (II) Using input driver 'libinput' for 'Intel HID 5 button array'
[    12.961] (**) Intel HID 5 button array: always reports core events
[    12.961] (**) Option "Device" "/dev/input/event8"
[    12.962] (II) event8  - Intel HID 5 button array: is tagged by udev as: Keyboard
[    12.962] (II) event8  - Intel HID 5 button array: device is a keyboard
[    12.962] (II) event8  - Intel HID 5 button array: device removed
[    13.000] (**) Option "config_info" "udev:/sys/devices/platform/INTC1070:00/input/input13/event8"
[    13.000] (II) XINPUT: Adding extended input device "Intel HID 5 button array" (type: KEYBOARD, id 16)
[    13.000] (**) Option "xkb_layout" "us"
[    13.003] (II) event8  - Intel HID 5 button array: is tagged by udev as: Keyboard
[    13.003] (II) event8  - Intel HID 5 button array: device is a keyboard
[    13.004] (II) config/udev: Adding input device Dell Privacy Driver (/dev/input/event14)
[    13.004] (**) Dell Privacy Driver: Applying InputClass "devname"
[    13.004] (**) Dell Privacy Driver: Applying InputClass "libinput keyboard catchall"
[    13.004] (**) Dell Privacy Driver: Applying InputClass "system-keyboard"
[    13.004] (II) Using input driver 'libinput' for 'Dell Privacy Driver'
[    13.004] (**) Dell Privacy Driver: always reports core events
[    13.004] (**) Option "Device" "/dev/input/event14"
[    13.005] (II) event14 - Dell Privacy Driver: is tagged by udev as: Keyboard
[    13.006] (II) event14 - Dell Privacy Driver: device is a keyboard
[    13.006] (II) event14 - Dell Privacy Driver: device removed
[    13.040] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/6932965F-1671-4CEB-B988-D3AB0A901919/input/input21/event14"
[    13.040] (II) XINPUT: Adding extended input device "Dell Privacy Driver" (type: KEYBOARD, id 17)
[    13.040] (**) Option "xkb_layout" "us"
[    13.044] (II) event14 - Dell Privacy Driver: is tagged by udev as: Keyboard
[    13.044] (II) event14 - Dell Privacy Driver: device is a keyboard
[    13.046] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event15)
[    13.046] (**) Dell WMI hotkeys: Applying InputClass "devname"
[    13.046] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    13.046] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[    13.046] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[    13.046] (**) Dell WMI hotkeys: always reports core events
[    13.046] (**) Option "Device" "/dev/input/event15"
[    13.046] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    13.046] (II) event15 - Dell WMI hotkeys: device is a keyboard
[    13.046] (II) event15 - Dell WMI hotkeys: device removed
[    13.117] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input22/event15"
[    13.117] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 18)
[    13.117] (**) Option "xkb_layout" "us"
[    13.121] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    13.121] (II) event15 - Dell WMI hotkeys: device is a keyboard
[    13.123] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[    13.123] (**) AT Translated Set 2 keyboard: Applying InputClass "devname"
[    13.123] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    13.123] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    13.123] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    13.123] (**) AT Translated Set 2 keyboard: always reports core events
[    13.123] (**) Option "Device" "/dev/input/event2"
[    13.125] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    13.125] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    13.127] (II) event2  - AT Translated Set 2 keyboard: device removed
[    13.170] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[    13.170] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 19)
[    13.170] (**) Option "xkb_layout" "us"
[    13.174] (II) event2  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    13.174] (II) event2  - AT Translated Set 2 keyboard: device is a keyboard
[    13.178] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event17)
[    13.178] (**) PS/2 Generic Mouse: Applying InputClass "devname"
[    13.178] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[    13.178] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[    13.178] (**) PS/2 Generic Mouse: always reports core events
[    13.178] (**) Option "Device" "/dev/input/event17"
[    13.179] (II) event17 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[    13.180] (II) event17 - PS/2 Generic Mouse: device is a pointer
[    13.180] (II) event17 - PS/2 Generic Mouse: device removed
[    13.230] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input24/event17"
[    13.230] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 20)
[    13.231] (**) Option "AccelerationScheme" "none"
[    13.231] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[    13.231] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    13.231] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    13.232] (II) event17 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[    13.233] (II) event17 - PS/2 Generic Mouse: device is a pointer
[    13.234] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse4)
[    13.234] (**) PS/2 Generic Mouse: Applying InputClass "devname"
[    13.234] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[    13.234] (**) PS/2 Generic Mouse: always reports core events
[    13.234] (**) Option "Device" "/dev/input/mouse4"
[    13.287] (II) mouse4  - not using input device '/dev/input/mouse4'.
[    13.287] (EE) libinput: PS/2 Generic Mouse: Failed to create a device for /dev/input/mouse4
[    13.287] (EE) PreInit returned 2 for "PS/2 Generic Mouse"
[    13.287] (II) UnloadModule: "libinput"
[    13.289] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[    13.289] (**) PC Speaker: Applying InputClass "devname"
[    13.289] (II) Using input driver 'libinput' for 'PC Speaker'
[    13.289] (**) PC Speaker: always reports core events
[    13.289] (**) Option "Device" "/dev/input/event16"
[    13.291] (II) event16 - PC Speaker: not tagged as supported input device
[    13.340] (II) event16 - not using input device '/dev/input/event16'.
[    13.340] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event16
[    13.340] (EE) PreInit returned 2 for "PC Speaker"
[    13.340] (II) UnloadModule: "libinput"
[    13.380] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "devname"
[    13.380] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "libinput keyboard catchall"
[    13.380] (**) Logitech G403 HERO Gaming Mouse Keyboard: Applying InputClass "system-keyboard"
[    13.380] (II) Using input driver 'libinput' for 'Logitech G403 HERO Gaming Mouse Keyboard'
[    13.380] (**) Logitech G403 HERO Gaming Mouse Keyboard: always reports core events
[    13.380] (**) Option "Device" "/dev/input/event4"
[    13.380] (II) libinput: Logitech G403 HERO Gaming Mouse Keyboard: is a virtual subdevice
[    13.380] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:046D:C08F.0004/input/input5/event4"
[    13.380] (II) XINPUT: Adding extended input device "Logitech G403 HERO Gaming Mouse Keyboard" (type: KEYBOARD, id 21)
[    13.380] (**) Option "xkb_layout" "us"
[    13.382] (II) config/udev: removing device Video Bus
[    13.382] (II) event13 - Video Bus: device removed
[    13.420] (II) UnloadModule: "libinput"
[    13.421] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[    13.421] (**) Video Bus: Applying InputClass "devname"
[    13.421] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    13.421] (**) Video Bus: Applying InputClass "system-keyboard"
[    13.421] (II) Using input driver 'libinput' for 'Video Bus'
[    13.421] (**) Video Bus: always reports core events
[    13.421] (**) Option "Device" "/dev/input/event13"
[    13.422] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[    13.422] (II) event13 - Video Bus: device is a keyboard
[    13.422] (II) event13 - Video Bus: device removed
[    13.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20/event13"
[    13.487] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    13.487] (**) Option "xkb_layout" "us"
[    13.489] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[    13.489] (II) event13 - Video Bus: device is a keyboard
[    13.489] (II) config/udev: removing device Dell Privacy Driver
[    13.490] (II) event14 - Dell Privacy Driver: device removed
[    13.540] (II) UnloadModule: "libinput"
[    13.541] (II) config/udev: Adding input device Dell Privacy Driver (/dev/input/event14)
[    13.542] (**) Dell Privacy Driver: Applying InputClass "devname"
[    13.542] (**) Dell Privacy Driver: Applying InputClass "libinput keyboard catchall"
[    13.542] (**) Dell Privacy Driver: Applying InputClass "system-keyboard"
[    13.542] (II) Using input driver 'libinput' for 'Dell Privacy Driver'
[    13.542] (**) Dell Privacy Driver: always reports core events
[    13.542] (**) Option "Device" "/dev/input/event14"
[    13.544] (II) event14 - Dell Privacy Driver: is tagged by udev as: Keyboard
[    13.544] (II) event14 - Dell Privacy Driver: device is a keyboard
[    13.544] (II) event14 - Dell Privacy Driver: device removed
[    13.647] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/6932965F-1671-4CEB-B988-D3AB0A901919/input/input21/event14"
[    13.647] (II) XINPUT: Adding extended input device "Dell Privacy Driver" (type: KEYBOARD, id 17)
[    13.647] (**) Option "xkb_layout" "us"
[    13.647] (II) event14 - Dell Privacy Driver: is tagged by udev as: Keyboard
[    13.648] (II) event14 - Dell Privacy Driver: device is a keyboard
[    13.648] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse4)
[    13.648] (**) PS/2 Generic Mouse: Applying InputClass "devname"
[    13.648] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[    13.648] (**) PS/2 Generic Mouse: always reports core events
[    13.648] (**) Option "Device" "/dev/input/mouse4"
[    13.717] (II) mouse4  - not using input device '/dev/input/mouse4'.
[    13.717] (EE) libinput: PS/2 Generic Mouse: Failed to create a device for /dev/input/mouse4
[    13.717] (EE) PreInit returned 2 for "PS/2 Generic Mouse"
[    13.717] (II) UnloadModule: "libinput"
[    13.718] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[    13.718] (**) PC Speaker: Applying InputClass "devname"
[    13.718] (II) Using input driver 'libinput' for 'PC Speaker'
[    13.718] (**) PC Speaker: always reports core events
[    13.718] (**) Option "Device" "/dev/input/event16"
[    13.720] (II) event16 - PC Speaker: not tagged as supported input device
[    13.763] (II) event16 - not using input device '/dev/input/event16'.
[    13.764] (EE) libinput: PC Speaker: Failed to create a device for /dev/input/event16
[    13.764] (EE) PreInit returned 2 for "PC Speaker"
[    13.764] (II) UnloadModule: "libinput"
[    13.764] (II) config/udev: removing device PS/2 Generic Mouse
[    13.764] (II) event17 - PS/2 Generic Mouse: device removed
[    13.807] (II) UnloadModule: "libinput"
[    13.808] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event17)
[    13.808] (**) PS/2 Generic Mouse: Applying InputClass "devname"
[    13.808] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[    13.808] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[    13.808] (**) PS/2 Generic Mouse: always reports core events
[    13.808] (**) Option "Device" "/dev/input/event17"
[    13.809] (II) event17 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[    13.810] (II) event17 - PS/2 Generic Mouse: device is a pointer
[    13.810] (II) event17 - PS/2 Generic Mouse: device removed
[    13.864] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input24/event17"
[    13.864] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 20)
[    13.864] (**) Option "AccelerationScheme" "none"
[    13.864] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[    13.864] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[    13.864] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[    13.867] (II) event17 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[    13.867] (II) event17 - PS/2 Generic Mouse: device is a pointer
[    13.871] (II) intel(0): EDID vendor "SHP", prod id 5457
[    13.871] (II) intel(0): Using EDID range info for horizontal sync
[    13.871] (II) intel(0): Using EDID range info for vertical refresh
[    13.871] (II) intel(0): Printing DDC gathered Modelines:
[    13.871] (II) intel(0): Modeline "3840x2400"x0.0  592.50  3840 3888 3920 4000  2400 2403 2409 2469 -hsync -vsync (148.1 kHz eP)
[    13.907] (II) config/udev: removing device Dell WMI hotkeys
[    13.907] (II) event15 - Dell WMI hotkeys: device removed
[    13.954] (II) UnloadModule: "libinput"
[    13.955] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event15)
[    13.955] (**) Dell WMI hotkeys: Applying InputClass "devname"
[    13.955] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    13.955] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[    13.955] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[    13.955] (**) Dell WMI hotkeys: always reports core events
[    13.955] (**) Option "Device" "/dev/input/event15"
[    13.957] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    13.957] (II) event15 - Dell WMI hotkeys: device is a keyboard
[    13.958] (II) event15 - Dell WMI hotkeys: device removed
[    14.004] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:02/wmi_bus/wmi_bus-PNP0C14:02/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input22/event15"
[    14.004] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 18)
[    14.004] (**) Option "xkb_layout" "us"
[    14.006] (II) event15 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[    14.007] (II) event15 - Dell WMI hotkeys: device is a keyboard
[    14.009] (II) config/udev: Adding input device sof-soundwire HDMI/DP,pcm=5 (/dev/input/event18)
[    14.009] (**) sof-soundwire HDMI/DP,pcm=5: Applying InputClass "devname"
[    14.009] (II) Using input driver 'libinput' for 'sof-soundwire HDMI/DP,pcm=5'
[    14.009] (**) sof-soundwire HDMI/DP,pcm=5: always reports core events
[    14.009] (**) Option "Device" "/dev/input/event18"
[    14.010] (II) event18 - sof-soundwire HDMI/DP,pcm=5: is tagged by udev as: Switch
[    14.057] (II) event18 - not using input device '/dev/input/event18'.
[    14.057] (EE) libinput: sof-soundwire HDMI/DP,pcm=5: Failed to create a device for /dev/input/event18
[    14.057] (EE) PreInit returned 2 for "sof-soundwire HDMI/DP,pcm=5"
[    14.057] (II) UnloadModule: "libinput"
[    14.058] (II) config/udev: Adding input device sof-soundwire HDMI/DP,pcm=6 (/dev/input/event19)
[    14.059] (**) sof-soundwire HDMI/DP,pcm=6: Applying InputClass "devname"
[    14.059] (II) Using input driver 'libinput' for 'sof-soundwire HDMI/DP,pcm=6'
[    14.059] (**) sof-soundwire HDMI/DP,pcm=6: always reports core events
[    14.059] (**) Option "Device" "/dev/input/event19"
[    14.061] (II) event19 - sof-soundwire HDMI/DP,pcm=6: is tagged by udev as: Switch
[    14.100] (II) event19 - not using input device '/dev/input/event19'.
[    14.100] (EE) libinput: sof-soundwire HDMI/DP,pcm=6: Failed to create a device for /dev/input/event19
[    14.100] (EE) PreInit returned 2 for "sof-soundwire HDMI/DP,pcm=6"
[    14.100] (II) UnloadModule: "libinput"
[    14.102] (II) config/udev: Adding input device LXT2021:00 29BD:3303 (/dev/input/mouse3)
[    14.102] (**) LXT2021:00 29BD:3303: Applying InputClass "devname"
[    14.102] (II) Using input driver 'libinput' for 'LXT2021:00 29BD:3303'
[    14.102] (**) LXT2021:00 29BD:3303: always reports core events
[    14.102] (**) Option "Device" "/dev/input/mouse3"
[    14.140] (II) mouse3  - not using input device '/dev/input/mouse3'.
[    14.140] (EE) libinput: LXT2021:00 29BD:3303: Failed to create a device for /dev/input/mouse3
[    14.140] (EE) PreInit returned 2 for "LXT2021:00 29BD:3303"
[    14.140] (II) UnloadModule: "libinput"
[    14.142] (II) config/udev: Adding input device sof-soundwire HDMI/DP,pcm=7 (/dev/input/event20)
[    14.142] (**) sof-soundwire HDMI/DP,pcm=7: Applying InputClass "devname"
[    14.142] (II) Using input driver 'libinput' for 'sof-soundwire HDMI/DP,pcm=7'
[    14.142] (**) sof-soundwire HDMI/DP,pcm=7: always reports core events
[    14.142] (**) Option "Device" "/dev/input/event20"
[    14.144] (II) event20 - sof-soundwire HDMI/DP,pcm=7: is tagged by udev as: Switch
[    14.190] (II) event20 - not using input device '/dev/input/event20'.
[    14.190] (EE) libinput: sof-soundwire HDMI/DP,pcm=7: Failed to create a device for /dev/input/event20
[    14.190] (EE) PreInit returned 2 for "sof-soundwire HDMI/DP,pcm=7"
[    14.190] (II) UnloadModule: "libinput"
[    14.193] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Mouse (/dev/input/mouse1)
[    14.193] (**) VEN_04F3:00 04F3:31D1 Mouse: Applying InputClass "devname"
[    14.193] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Mouse'
[    14.193] (**) VEN_04F3:00 04F3:31D1 Mouse: always reports core events
[    14.193] (**) Option "Device" "/dev/input/mouse1"
[    14.250] (II) mouse1  - not using input device '/dev/input/mouse1'.
[    14.250] (EE) libinput: VEN_04F3:00 04F3:31D1 Mouse: Failed to create a device for /dev/input/mouse1
[    14.250] (EE) PreInit returned 2 for "VEN_04F3:00 04F3:31D1 Mouse"
[    14.250] (II) UnloadModule: "libinput"
[    14.252] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Touchpad (/dev/input/mouse2)
[    14.252] (**) VEN_04F3:00 04F3:31D1 Touchpad: Applying InputClass "devname"
[    14.252] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Touchpad'
[    14.252] (**) VEN_04F3:00 04F3:31D1 Touchpad: always reports core events
[    14.252] (**) Option "Device" "/dev/input/mouse2"
[    14.294] (II) mouse2  - not using input device '/dev/input/mouse2'.
[    14.294] (EE) libinput: VEN_04F3:00 04F3:31D1 Touchpad: Failed to create a device for /dev/input/mouse2
[    14.294] (EE) PreInit returned 2 for "VEN_04F3:00 04F3:31D1 Touchpad"
[    14.294] (II) UnloadModule: "libinput"
[    14.295] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 UNKNOWN (/dev/input/event11)
[    14.295] (**) VEN_04F3:00 04F3:31D1 UNKNOWN: Applying InputClass "devname"
[    14.295] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 UNKNOWN'
[    14.295] (**) VEN_04F3:00 04F3:31D1 UNKNOWN: always reports core events
[    14.295] (**) Option "Device" "/dev/input/event11"
[    14.297] (II) event11 - VEN_04F3:00 04F3:31D1 UNKNOWN: not tagged as supported input device
[    14.357] (II) event11 - not using input device '/dev/input/event11'.
[    14.357] (EE) libinput: VEN_04F3:00 04F3:31D1 UNKNOWN: Failed to create a device for /dev/input/event11
[    14.357] (EE) PreInit returned 2 for "VEN_04F3:00 04F3:31D1 UNKNOWN"
[    14.357] (II) UnloadModule: "libinput"
[    14.357] (II) config/udev: removing device VEN_04F3:00 04F3:31D1 Mouse
[    14.358] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device removed
[    14.407] (II) UnloadModule: "libinput"
[    14.408] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Mouse (/dev/input/event9)
[    14.408] (**) VEN_04F3:00 04F3:31D1 Mouse: Applying InputClass "devname"
[    14.408] (**) VEN_04F3:00 04F3:31D1 Mouse: Applying InputClass "libinput pointer catchall"
[    14.408] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Mouse'
[    14.408] (**) VEN_04F3:00 04F3:31D1 Mouse: always reports core events
[    14.408] (**) Option "Device" "/dev/input/event9"
[    14.411] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: is tagged by udev as: Mouse Pointingstick
[    14.412] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device is a pointer
[    14.412] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device removed
[    14.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-VEN_04F3:00/0018:04F3:31D1.0008/input/input25/event9"
[    14.491] (II) XINPUT: Adding extended input device "VEN_04F3:00 04F3:31D1 Mouse" (type: MOUSE, id 13)
[    14.491] (**) Option "AccelerationScheme" "none"
[    14.491] (**) VEN_04F3:00 04F3:31D1 Mouse: (accel) selected scheme none/0
[    14.491] (**) VEN_04F3:00 04F3:31D1 Mouse: (accel) acceleration factor: 2.000
[    14.491] (**) VEN_04F3:00 04F3:31D1 Mouse: (accel) acceleration threshold: 4
[    14.494] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: is tagged by udev as: Mouse Pointingstick
[    14.494] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device is a pointer
[    14.497] (II) config/udev: removing device LXT2021:00 29BD:3303
[    14.497] (II) event12 - LXT2021:00 29BD:3303: device removed
[    14.540] (II) UnloadModule: "libinput"
[    14.542] (II) config/udev: Adding input device LXT2021:00 29BD:3303 (/dev/input/event12)
[    14.542] (**) LXT2021:00 29BD:3303: Applying InputClass "devname"
[    14.542] (**) LXT2021:00 29BD:3303: Applying InputClass "libinput touchscreen catchall"
[    14.542] (II) Using input driver 'libinput' for 'LXT2021:00 29BD:3303'
[    14.542] (**) LXT2021:00 29BD:3303: always reports core events
[    14.542] (**) Option "Device" "/dev/input/event12"
[    14.544] (II) event12 - LXT2021:00 29BD:3303: is tagged by udev as: Touchscreen
[    14.544] (II) event12 - LXT2021:00 29BD:3303: device is a touch device
[    14.545] (II) event12 - LXT2021:00 29BD:3303: device removed
[    14.594] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-9/i2c-LXT2021:00/0018:29BD:3303.0009/input/input29/event12"
[    14.594] (II) XINPUT: Adding extended input device "LXT2021:00 29BD:3303" (type: TOUCHSCREEN, id 12)
[    14.594] (**) Option "AccelerationScheme" "none"
[    14.594] (**) LXT2021:00 29BD:3303: (accel) selected scheme none/0
[    14.594] (**) LXT2021:00 29BD:3303: (accel) acceleration factor: 2.000
[    14.594] (**) LXT2021:00 29BD:3303: (accel) acceleration threshold: 4
[    14.597] (II) event12 - LXT2021:00 29BD:3303: is tagged by udev as: Touchscreen
[    14.597] (II) event12 - LXT2021:00 29BD:3303: device is a touch device
[    14.598] (II) config/udev: removing device VEN_04F3:00 04F3:31D1 Touchpad
[    14.598] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device removed
[    14.637] (II) UnloadModule: "libinput"
[    14.638] (II) config/udev: Adding input device VEN_04F3:00 04F3:31D1 Touchpad (/dev/input/event10)
[    14.638] (**) VEN_04F3:00 04F3:31D1 Touchpad: Applying InputClass "devname"
[    14.638] (**) VEN_04F3:00 04F3:31D1 Touchpad: Applying InputClass "libinput touchpad catchall"
[    14.638] (II) Using input driver 'libinput' for 'VEN_04F3:00 04F3:31D1 Touchpad'
[    14.638] (**) VEN_04F3:00 04F3:31D1 Touchpad: always reports core events
[    14.638] (**) Option "Device" "/dev/input/event10"
[    14.641] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: is tagged by udev as: Touchpad
[    14.643] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device is a touchpad
[    14.643] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device removed
[    14.690] (**) Option "Tapping" "on"
[    14.692] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-VEN_04F3:00/0018:04F3:31D1.0008/input/input26/event10"
[    14.692] (II) XINPUT: Adding extended input device "VEN_04F3:00 04F3:31D1 Touchpad" (type: TOUCHPAD, id 14)
[    14.695] (**) Option "AccelerationScheme" "none"
[    14.695] (**) VEN_04F3:00 04F3:31D1 Touchpad: (accel) selected scheme none/0
[    14.695] (**) VEN_04F3:00 04F3:31D1 Touchpad: (accel) acceleration factor: 2.000
[    14.695] (**) VEN_04F3:00 04F3:31D1 Touchpad: (accel) acceleration threshold: 4
[    14.696] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: is tagged by udev as: Touchpad
[    14.698] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device is a touchpad
[    22.958] (II) intel(0): resizing framebuffer to 11520x4320
[    23.043] (II) intel(0): switch to mode 3840x2160@60.0 on DP1 using pipe 1, position (3840, 0), rotation normal, reflection none
[    80.825] (EE) client bug: timer event10 keyboard: scheduled expiry is in the past (-2073ms), your system is too slow
[    80.825] (EE) client bug: timer event10 tap: scheduled expiry is in the past (-27ms), your system is too slow
[    80.825] (EE) client bug: timer event10 tap: scheduled expiry is in the past (-27ms), your system is too slow
[    80.825] (EE) client bug: timer event10 hold: scheduled expiry is in the past (-167ms), your system is too slow
[    80.825] (EE) client bug: timer event10 hold: scheduled expiry is in the past (-88ms), your system is too slow
[    80.825] (EE) WARNING: log rate limit exceeded (5 msgs per 3600000ms). Discarding future messages.
[    80.825] (EE) event10 - VEN_04F3:00 04F3:31D1 Touchpad: kernel bug: Touch jump detected and discarded.
See https://wayland.freedesktop.org/libinput/doc/1.22.1/touchpad-jumping-cursors.html for details
[    80.825] (II) event3  - Logitech G403 HERO Gaming Mouse: device removed
[    80.853] (II) config/udev: removing device Logitech G403 HERO Gaming Mouse
[    80.856] (II) UnloadModule: "libinput"
[    80.914] (II) event4  - Logitech G403 HERO Gaming Mouse Keyboard: device removed
[    81.191] (II) event5  - Apple Inc. Magic Keyboard with Numeric Keypad: device removed
[    82.498] (II) config/udev: removing device Logitech G403 HERO Gaming Mouse Keyboard
[    82.498] (II) UnloadModule: "libinput"
[    82.499] (II) config/udev: removing device Logitech G403 HERO Gaming Mouse Keyboard
[    82.499] (II) UnloadModule: "libinput"
[    82.499] (II) config/udev: removing device Apple Inc. Magic Keyboard with Numeric Keypad
[    82.500] (II) UnloadModule: "libinput"
[    82.515] (II) intel(0): resizing framebuffer to 3840x2400
[    99.498] (II) event1  - Power Button: device removed
[    99.534] (II) event0  - Lid Switch: device removed
[    99.587] (II) event7  - Intel HID events: device removed
[    99.610] (II) event8  - Intel HID 5 button array: device removed
[    99.634] (II) event2  - AT Translated Set 2 keyboard: device removed
[    99.654] (II) event13 - Video Bus: device removed
[    99.728] (II) event14 - Dell Privacy Driver: device removed
[    99.784] (II) event17 - PS/2 Generic Mouse: device removed
[    99.840] (EE) event10 - VEN_04F3:00 04F3:31D1 Touchpad: client bug: event processing lagging behind by 50ms, your system is too slow
[    99.841] (II) event15 - Dell WMI hotkeys: device removed
[    99.887] (II) event9  - VEN_04F3:00 04F3:31D1 Mouse: device removed
[    99.941] (II) event12 - LXT2021:00 29BD:3303: device removed
[    99.984] (II) event10 - VEN_04F3:00 04F3:31D1 Touchpad: device removed
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.026] (II) UnloadModule: "libinput"
[   100.027] (II) UnloadModule: "libinput"
[   100.137] (II) Server terminated successfully (0). Closing log file.

nlea · February 1, 2023, 9:08am

During the first one I got the following error that might be directly related to the Display:

Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port4: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot reset (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: Cannot enable. Maybe the USB cable is bad?
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot disable (err = -71)
Feb 01 09:36:21 kernel: usb 3-1-port3: cannot disable (err = -71)
Feb 01 09:36:21 kernel: i915 0000:00:02.0: [drm] *ERROR* [ENCODER:244:DDI TC1/PHY TC1][DPRX] Failed to enable link training
Feb 01 09:36:21 kernel: rt1316-sdca sdw:1:025d:1316:01: Bus clash detected before INT mask is enabled
Feb 01 09:36:21 kernel: rt1316-sdca sdw:2:025d:1316:01: Bus clash detected before INT mask is enabled
Feb 01 09:36:21 kernel: mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
Feb 01 09:36:21 kernel: OOM killer enabled.
Feb 01 09:36:21 kernel: Restarting tasks ... 
Feb 01 09:36:21 kernel: usb 3-1: USB disconnect, device number 2
Feb 01 09:36:21 kernel: usb 3-1.3: USB disconnect, device number 4
Feb 01 09:36:21 kernel: mei_pxp 0000:00:16.0-fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1: bound 0000:00:02.0 (ops i915_pxp_tee_component_ops [i915])
Feb 01 09:36:21 kernel: done.
Feb 01 09:36:21 kernel: random: crng reseeded on system resumption
Feb 01 09:36:21 systemd-logind[540]: Power key pressed short.
Feb 01 09:36:21 rtkit-daemon[1005]: The canary thread is apparently starving. Taking action.
Feb 01 09:36:21 rtkit-daemon[1005]: Demoting known real-time threads.
Feb 01 09:36:21 rtkit-daemon[1005]: Successfully demoted thread 1021 of process 990.
Feb 01 09:36:21 rtkit-daemon[1005]: Successfully demoted thread 990 of process 990.
Feb 01 09:36:21 rtkit-daemon[1005]: Successfully demoted thread 1022 of process 996.
Feb 01 09:36:21 rtkit-daemon[1005]: Successfully demoted thread 996 of process 996.
Feb 01 09:36:21 rtkit-daemon[1005]: Successfully demoted thread 1020 of process 992.
Feb 01 09:36:21 rtkit-daemon[1005]: Successfully demoted thread 992 of process 992.
Feb 01 09:36:21 rtkit-daemon[1005]: Demoted 6 threads.

The cable is not the problem. I tried multiple cables and with different laptops they are working. Also note I tried different monitors. Using one with a display port input didn’t change anything…

ricklinux · February 1, 2023, 4:25pm

You can run those commands and upload them and it makes it a lot easier to read through. I have a very hard time looking at info on the screen that has scrolling.

First commands you can do like this.

cat /var/log/Xorg.0.log.old | eos-sendlog

journalctl -b -1 --nohost --no pager | eos-sendlog

If it were me i would be trying a usb-c to display port adapter that has the cable for display port.

ricklinux · February 1, 2023, 4:57pm

@nlea
You don’t have Windows installed also on this laptop? If so make sure fast startup feature in Windows power management is disabled.

Edit: You could also try this kernel parameter. Not sure if you are using grub or systemd boot

usbcore.autosuspend=-1

jake99 · February 1, 2023, 5:07pm

First thing you need to do is remove the intel driver and reboot. Your Alder Lake is too new for it.

yay -R xf86-video-intel

You can see this in the logs

Also, hardware rendering is not going to work with i965 as show in the log again

nlea:

[    11.773] (EE) AIGLX error: dlopen of /usr/lib/dri/i965_dri.so failed (/usr/lib/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[    11.773] (EE) AIGLX error: unable to load driver i965

You will need modesetting with iris

This err = -71 is EPROTO error. which means usb packets are getting protocol errors and the usb connection is not initialized correctly.

This part is interesting, so Intel finally implemented DRM protection in their driver, there might be some issues regarding HDCP too. What is the model of the monitor that you are connecting to your laptop?

Have you tried with any older kernels? LTS might be too old, but maybe try with the kernel that works with installation environment.

thefrog · February 1, 2023, 8:34pm

Make sure the cable is actually working. I had one that would work sometimes and other times not. I thought it could be the video or some other driver. Is the Hardware compatible?