Black Screen when kernel update

If I update the kernel I can no longer boot the system.

I use btrfs with luks, snapper and grub.

This is yay’s log before the reboot.

Package (2)              Old Version   New Version   Net Change

extra/linux-zen          6.6.8.zen1-1  6.6.9.zen1-1    0,09 MiB
extra/linux-zen-headers  6.6.8.zen1-1  6.6.9.zen1-1    0,00 MiB

Total Installed Size:  261,14 MiB
Net Upgrade Size:        0,09 MiB

:: Proceed with installation? [Y/n] y
(2/2) checking keys in keyring                                                       [-------------------------------------------------] 100%
(2/2) checking package integrity                                                     [-------------------------------------------------] 100%
(2/2) loading package files                                                          [-------------------------------------------------] 100%
(2/2) checking for file conflicts                                                    [-------------------------------------------------] 100%
:: Running pre-transaction hooks...
(1/4) Performing snapper pre snapshots for the following configurations...
==> root: 699
(2/4) Removing initramfs...
(3/4) Removing linux initcpios...
(4/4) Remove DKMS modules
:: Processing package changes...
(1/2) upgrading linux-zen                                                            [-------------------------------------------------] 100%
(2/2) upgrading linux-zen-headers                                                    [-------------------------------------------------] 100%
:: Running post-transaction hooks...
(1/9) Arming ConditionNeedsUpdate...
(2/9) Updating module dependencies...
(3/9) Install DKMS modules
==> dkms install --no-depmod binder/1 -k 6.6.9-zen1-1-zen
==> dkms install --no-depmod broadcom-wl/6.30.223.271 -k 6.6.9-zen1-1-zen
==> depmod 6.6.9-zen1-1-zen
(4/9) Updating initramfs...
:: Building initramfs for linux-zen (6.6.9-zen1-1-zen)
dracut: Executing: /usr/bin/dracut --force --hostonly --no-hostonly-cmdline /boot/initramfs-linux-zen.img 6.6.9-zen1-1-zen
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: i18n ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: crypt ***
dracut: *** Including module: dm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 60-persistent-storage-dm.rules
dracut: Skipping udev rule: 55-dm.rules
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: btrfs-snapshot-overlay ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: Skipping udev rule: 70-persistent-net.rules
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode:                     real
dracut: Method:                   memcmp
dracut: Files:                    822
dracut: Linked:                   1 files
dracut: Compared:                 0 xattrs
dracut: Compared:                 39 files
dracut: Saved:                    690 B
dracut: Duration:                 0.007928 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Using microcode found in '/boot/intel-ucode.img' ***
dracut: *** Store current command line parameters ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/boot/initramfs-linux-zen.img' ***
dracut: *** Creating initramfs image file '/boot/initramfs-linux-zen.img' done ***
:: Building fallback initramfs for linux-zen (6.6.9-zen1-1-zen)
dracut: Executing: /usr/bin/dracut --force --no-hostonly /boot/initramfs-linux-zen-fallback.img 6.6.9-zen1-1-zen
dracut: dracut module 'dash' will not be installed, because command 'dash' could not be found!
dracut: dracut module 'mksh' will not be installed, because command 'mksh' could not be found!
dracut: dracut module 'systemd-pcrphase' will not be installed, because command '/usr/lib/systemd/systemd-pcrphase' could not be found!
dracut: dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut: dracut module 'dbus-broker' will not be installed, because command 'dbus-broker' could not be found!
dracut: dracut module 'rngd' will not be installed, because command 'rngd' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmanctl' could not be found!
dracut: dracut module 'connman' will not be installed, because command 'connmand-wait-online' could not be found!
dracut: dracut module 'network-wicked' will not be installed, because command 'wicked' could not be found!
dracut: dracut module 'tpm2-tss' will not be installed, because command 'tpm2' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fcoemon' could not be found!
dracut: dracut module 'fcoe' will not be installed, because command 'fcoeadm' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut: dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsiadm' could not be found!
dracut: dracut module 'iscsi' will not be installed, because command 'iscsid' could not be found!
dracut: dracut module 'nbd' depends on 'network', which can't be installed
dracut: dracut module 'nvmf' will not be installed, because command 'nvme' could not be found!
dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut: dracut module 'memstrack' will not be installed, because command 'memstrack' could not be found!
dracut: memstrack is not available
dracut: If you need to use rd.memdebug>=4, please install memstrack and procps-ng
dracut: *** Including module: systemd ***
dracut: *** Including module: systemd-initrd ***
dracut: *** Including module: modsign ***
dracut: *** Including module: i18n ***
dracut: *** Including module: btrfs ***
dracut: *** Including module: crypt ***
dracut: *** Including module: dm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 60-persistent-storage-dm.rules
dracut: Skipping udev rule: 55-dm.rules
dracut: *** Including module: dmraid ***
dracut: *** Including module: kernel-modules ***
dracut: *** Including module: kernel-modules-extra ***
dracut: *** Including module: lvm ***
dracut: Skipping udev rule: 64-device-mapper.rules
dracut: Skipping udev rule: 56-lvm.rules
dracut: Skipping udev rule: 60-persistent-storage-lvm.rules
dracut: *** Including module: mdraid ***
dracut: Skipping udev rule: 64-md-raid.rules
dracut: *** Including module: multipath ***
dracut: Skipping udev rule: 40-multipath.rules
dracut: *** Including module: nvdimm ***
dracut: *** Including module: qemu ***
dracut: *** Including module: qemu-net ***
dracut: *** Including module: btrfs-snapshot-overlay ***
dracut: *** Including module: lunmask ***
dracut: *** Including module: resume ***
dracut: *** Including module: rootfs-block ***
dracut: *** Including module: terminfo ***
dracut: *** Including module: udev-rules ***
dracut: Skipping udev rule: 40-redhat.rules
dracut: Skipping udev rule: 50-firmware.rules
dracut: Skipping udev rule: 50-udev.rules
dracut: Skipping udev rule: 91-permissions.rules
dracut: Skipping udev rule: 80-drivers-modprobe.rules
dracut: *** Including module: virtiofs ***
dracut: *** Including module: dracut-systemd ***
dracut: *** Including module: usrmount ***
dracut: *** Including module: base ***
dracut: *** Including module: fs-lib ***
dracut: *** Including module: shutdown ***
dracut: *** Including modules done ***
dracut: *** Installing kernel module dependencies ***
dracut: *** Installing kernel module dependencies done ***
dracut: *** Resolving executable dependencies ***
dracut: *** Resolving executable dependencies done ***
dracut: *** Hardlinking files ***
dracut: Mode:                     real
dracut: Method:                   memcmp
dracut: Files:                    2072
dracut: Linked:                   8 files
dracut: Compared:                 0 xattrs
dracut: Compared:                 476 files
dracut: Saved:                    1.42 MiB
dracut: Duration:                 0.028780 seconds
dracut: *** Hardlinking files done ***
dracut: *** Generating early-microcode cpio image ***
dracut: *** Constructing AuthenticAMD.bin ***
dracut: *** Using microcode found in '/boot/intel-ucode.img' ***
dracut: *** Store current command line parameters ***
dracut: *** Stripping files ***
dracut: *** Stripping files done ***
dracut: *** Creating image file '/boot/initramfs-linux-zen-fallback.img' ***
dracut: *** Creating initramfs image file '/boot/initramfs-linux-zen-fallback.img' done ***
(5/9) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'default'
==> Using default configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen.img --microcode /boot/intel-ucode.img
==> Starting build: '6.6.9-zen1-1-zen'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [kms]
  -> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
  -> Running build hook: [keymap]
  -> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
  -> Running build hook: [block]
  -> Running build hook: [filesystems]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-zen.img'
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux-zen.preset: 'fallback'
==> Using default configuration file: '/etc/mkinitcpio.conf'
  -> -k /boot/vmlinuz-linux-zen -g /boot/initramfs-linux-zen-fallback.img -S autodetect --microcode /boot/intel-ucode.img
==> Starting build: '6.6.9-zen1-1-zen'
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [kms]
==> WARNING: Possibly missing firmware for module: 'ast'
  -> Running build hook: [keyboard]
==> WARNING: Possibly missing firmware for module: 'xhci_pci'
  -> Running build hook: [keymap]
  -> Running build hook: [consolefont]
==> WARNING: consolefont: no font found in configuration
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: 'aic94xx'
==> WARNING: Possibly missing firmware for module: 'bfa'
==> WARNING: Possibly missing firmware for module: 'qed'
==> WARNING: Possibly missing firmware for module: 'qla1280'
==> WARNING: Possibly missing firmware for module: 'qla2xxx'
==> WARNING: Possibly missing firmware for module: 'wd719x'
  -> Running build hook: [filesystems]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating zstd-compressed initcpio image: '/boot/initramfs-linux-zen-fallback.img'
==> Image generation successful
(6/9) Check if user should be informed about rebooting after certain system package upgrades.
(7/9) Checking which packages need to be rebuilt
(8/9) Generating GRUB config to let grub-btrfs detect new snapshots...
Generating grub configuration file ...
Found background: /usr/share/endeavouros/splash.png
Found linux image: /boot/vmlinuz-linux-zen
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-zen.img
Found fallback initrd image(s) in /boot:  intel-ucode.img initramfs-linux-zen-fallback.img
Found linux image: /boot/vmlinuz-linux-lts
Found initrd image: /boot/intel-ucode.img /boot/initramfs-linux-lts.img
Found fallback initrd image(s) in /boot:  intel-ucode.img initramfs-linux-lts-fallback.img
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
Adding boot menu entry for UEFI Firmware Settings ...
Detecting snapshots ...
Found snapshot: 2024-01-03 18:30:13 | @/.snapshots/699/snapshot  | pre  | pacman -S -y -u --ignore linux-lts --ignore linux-lts-headers --config / |
Found snapshot: 2024-01-03 18:03:58 | @/.snapshots/698/snapshot  | post | dkms fastfetch fontconfig freerdp fwupd libcap-ng libexttextcat libva-me |
Found snapshot: 2024-01-03 18:03:36 | @/.snapshots/697/snapshot  | pre  | pacman -S -u --ignore linux-lts --ignore linux-lts-headers --ignore linu |
Found snapshot: 2024-01-03 17:53:45 | @/.snapshots/696/snapshot  | post | dkms fastfetch fontconfig freerdp fwupd libcap-ng libexttextcat libva-me |
Found snapshot: 2024-01-03 17:49:44 | @/.snapshots/695/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2024-01-03 17:47:35 | @_backup_20240301180036737 | N/A  | N/A                                                                      |
Found snapshot: 2024-01-03 17:16:34 | @/.snapshots/694/snapshot  | post | fwupd starship                                                           |
Found snapshot: 2024-01-03 17:16:26 | @/.snapshots/693/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2024-01-03 07:51:42 | @/.snapshots/692/snapshot  | post | dkms fastfetch fontconfig freerdp libcap-ng libexttextcat libva-mesa-dri |
Found snapshot: 2024-01-03 07:48:19 | @/.snapshots/691/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2023-12-31 19:30:17 | @/.snapshots/690/snapshot  | post | iputils libva-mesa-driver mesa vulkan-intel                              |
Found snapshot: 2023-12-31 19:30:09 | @/.snapshots/689/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2023-12-30 12:27:32 | @/.snapshots/688/snapshot  | post | eos-apps-info eos-bash-shared                                            |
Found snapshot: 2023-12-30 12:27:20 | @/.snapshots/687/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2023-12-30 03:51:38 | @/.snapshots/686/snapshot  | post | eos-rankmirrors libtraceevent nodejs openmpi postgresql-libs python-fast |
Found snapshot: 2023-12-30 03:51:28 | @/.snapshots/685/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2023-12-29 17:10:36 | @/.snapshots/684/snapshot  | post | penguins-eggs                                                            |
Found snapshot: 2023-12-29 17:10:20 | @/.snapshots/683/snapshot  | pre  | pacman -U --config /etc/pacman.conf -- /home/riccardo/.cache/yay/penguin |
Found snapshot: 2023-12-29 17:08:40 | @/.snapshots/682/snapshot  | post | leptonica python-exceptiongroup                                          |
Found snapshot: 2023-12-29 17:08:34 | @/.snapshots/681/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2023-12-29 13:04:05 | @/.snapshots/680/snapshot  | post | eos-dracut starship                                                      |
Found snapshot: 2023-12-29 13:03:10 | @/.snapshots/679/snapshot  | pre  | pacman -S -y -u --config /etc/pacman.conf --                             |
Found snapshot: 2023-12-28 18:31:17 | @/.snapshots/678/snapshot  | post | penguins-eggs                                                            |
Found snapshot: 2023-12-28 18:31:01 | @/.snapshots/677/snapshot  | pre  | pacman -U --config /etc/pacman.conf -- /home/riccardo/.cache/yay/penguin |
Found snapshot: 2023-12-28 18:29:17 | @/.snapshots/676/snapshot  | post | fontconfig iwd krb5 libseccomp linux-zen linux-zen-headers parallel ppp  |
Found snapshot: 2023-12-28 18:27:40 | @/.snapshots/675/snapshot  | pre  | pacman -S -u -y --config /etc/pacman.conf --                             |
Found snapshot: 2023-12-27 11:42:46 | @/.snapshots/674/snapshot  | post | wavemon                                                                  |
Found snapshot: 2023-12-27 11:42:42 | @/.snapshots/673/snapshot  | pre  | pacman -S --config /etc/pacman.conf -- extra/wavemon                     |
Found snapshot: 2023-12-26 10:23:05 | @/.snapshots/672/snapshot  | post | chromedriver penguins-eggs                                               |
Found snapshot: 2023-12-26 10:22:49 | @/.snapshots/671/snapshot  | pre  | pacman -U --config /etc/pacman.conf -- /home/riccardo/.cache/yay/chromed |
Found snapshot: 2023-12-26 10:21:28 | @/.snapshots/670/snapshot  | post | conky gtk3 hwloc imagemagick iputils iw libdrm python-bcrypt python-setu |
Found snapshot: 2023-12-26 10:19:49 | @/.snapshots/669/snapshot  | pre  | pacman -S -u --ignore linux-zen --ignore linux-zen-headers -y --config / |
Found snapshot: 2023-12-24 19:08:11 | @_backup_20240301174735736 | N/A  | N/A                                                                      |
Found snapshot: 2023-12-21 08:36:40 | @_backup_20232412190811726 | N/A  | N/A                                                                      |
Found snapshot: 2023-10-22 10:19:18 | @_backup_20231112173847495 | N/A  | N/A                                                                      |
Found 35 snapshot(s)
Unmount /tmp/grub-btrfs.33p9i2lbjF .. Success
done
(9/9) Performing snapper post snapshots for the following configurations...
==> root: 700

blkid

sudo blkid
/dev/mapper/luks-fd085464-4840-43bd-a55b-e1713c6c5a4f: LABEL="EndeavourOS" UUID="24be0b8b-ae79-4258-b1b6-fe4a44d47bc0" UUID_SUB="73ad4ded-e350-4be8-83ca-da26429611aa" BLOCK_SIZE="4096" TYPE="btrfs"
/dev/sda2: UUID="fd085464-4840-43bd-a55b-e1713c6c5a4f" TYPE="crypto_LUKS" PARTLABEL="EndeavourOS" PARTUUID="4fded22e-ed9f-44f7-ba56-1a61e8ab9f62"
/dev/sda3: UUID="B9A4-AF79" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="4f9ad4f5-0a4e-4db7-9835-4cebb4c47240"
/dev/sda1: UUID="BC78-4354" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="f0cfffc4-e95d-4d5d-a2e4-ceb45d9520a2"
/dev/zram0: LABEL="zram0" UUID="41c97003-8b45-4b93-ad4d-b7365dd21acf" TYPE="swap"

lsblk

NAME                                            SIZE FSTYPE      MOUNTPOINTS
sda                                           465,8G             
├─sda1                                         1000M vfat        /boot/efi
├─sda2                                        437,4G crypto_LUKS 
│ └─luks-fd085464-4840-43bd-a55b-e1713c6c5a4f 437,3G btrfs       /home/riccardo/.local/share/libvirt/images
│                                                                /var/log
│                                                                /var/cache
│                                                                /swap
│                                                                /home
│                                                                /
└─sda3                                          500M vfat        
sr0                                            1024M             
zram0                                           7,8G             [SWAP]

inxi

System:
  Kernel: 6.1.69-1-lts arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    Desktop: KDE Plasma v: 5.27.10 Distro: EndeavourOS base: Arch Linux
Machine:
  Type: Laptop System: Apple product: MacBookPro9,2 v: 1.0
    serial: <superuser required>
  Mobo: Apple model: Mac-6F01561E16C75D06 v: MacBookPro9,2
    serial: <superuser required> UEFI: Apple v: 429.0.0.0.0 date: 03/18/2022
Battery:
  ID-1: BAT0 charge: 32.7 Wh (98.2%) condition: 33.3/62.9 Wh (52.9%)
    volts: 12.0 min: 10.9 model: SMP bq20z451 status: full
CPU:
  Info: dual core model: Intel Core i5-3210M bits: 64 type: MT MCP
    arch: Ivy Bridge rev: 9 cache: L1: 128 KiB L2: 512 KiB L3: 3 MiB
  Speed (MHz): avg: 1253 high: 1317 min/max: 1200/3100 cores: 1: 1197
    2: 1300 3: 1317 4: 1200 bogomips: 19961
  Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Graphics:
  Device-1: Intel 3rd Gen Core processor Graphics vendor: Apple driver: i915
    v: kernel arch: Gen-7 bus-ID: 00:02.0
  Display: wayland server: X.org v: 1.21.1.10 with: Xwayland v: 23.2.3
    compositor: kwin_wayland driver: X: loaded: modesetting dri: crocus
    gpu: i915 resolution: 1280x800
  API: EGL v: 1.5 drivers: crocus,swrast platforms:
    active: gbm,wayland,x11,surfaceless,device inactive: N/A
  API: OpenGL v: 4.5 compat-v: 4.2 vendor: intel mesa v: 23.3.2-arch1.2
    glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 4000 (IVB
    GT2)
  API: Vulkan v: 1.3.274 drivers: intel surfaces: xcb,xlib,wayland
    devices: 1
Audio:
  Device-1: Intel 7 Series/C216 Family High Definition Audio
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
  API: ALSA v: k6.1.69-1-lts status: kernel-api
  Server-1: sndiod v: N/A status: off
  Server-2: PipeWire v: 1.0.0 status: active
Network:
  Device-1: Broadcom NetXtreme BCM57765 Gigabit Ethernet PCIe driver: tg3
    v: kernel port: N/A bus-ID: 01:00.0
  IF: enp1s0f0 state: down mac: <filter>
  Device-2: Broadcom BCM4331 802.11a/b/g/n vendor: Apple AirPort Extreme
    driver: wl v: kernel bus-ID: 02:00.0
  IF: wlan0 state: up mac: <filter>
  IF-ID-1: virbr0 state: down mac: <filter>
  IF-ID-2: waydroid0 state: down mac: <filter>
Drives:
  Local Storage: total: 465.76 GiB used: 358.97 GiB (77.1%)
  ID-1: /dev/sda vendor: Samsung model: SSD 860 EVO 500GB size: 465.76 GiB
Partition:
  ID-1: / size: 437.35 GiB used: 358.97 GiB (82.1%) fs: btrfs dev: /dev/dm-0
    mapped: luks-fd085464-4840-43bd-a55b-e1713c6c5a4f
  ID-2: /boot/efi size: 998 MiB used: 364 KiB (0.0%) fs: vfat dev: /dev/sda1
  ID-3: /home size: 437.35 GiB used: 358.97 GiB (82.1%) fs: btrfs
    dev: /dev/dm-0 mapped: luks-fd085464-4840-43bd-a55b-e1713c6c5a4f
  ID-4: /var/log size: 437.35 GiB used: 358.97 GiB (82.1%) fs: btrfs
    dev: /dev/dm-0 mapped: luks-fd085464-4840-43bd-a55b-e1713c6c5a4f
Swap:
  ID-1: swap-1 type: file size: 7.81 GiB used: 0 KiB (0.0%)
    file: /swap/swapfile
  ID-2: swap-2 type: zram size: 7.77 GiB used: 0 KiB (0.0%) dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 69.0 C mobo: N/A
  Fan Speeds (rpm): N/A
Info:
  Processes: 252 Uptime: 13m Memory: total: 16 GiB available: 15.53 GiB
  used: 3.15 GiB (20.3%) Init: systemd Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: 1474 Shell: Zsh v: 5.9 inxi: 3.3.31

for some reason, you have both dracut and mkinitcpio installed. That should not be the case, it is either or.
@dalto might need to look at that one.

Yes. The issue is that mkinitcpio is overwriting your dracut initrds.

Remove the package mkinitcpio and run sudo dracut-rebuild

1 Like

@BS86 @dalto

Thanks for the quick solution.
I just want to say that I didn’t install mkinitcpio but it was installed as a dependency of some other package…

LANG=C pacman -Qi mkinitcpio
Name            : mkinitcpio
Version         : 37.1-2
Description     : Modular initramfs image creation utility
Architecture    : any
URL             : https://gitlab.archlinux.org/archlinux/mkinitcpio/mkinitcpio
Licenses        : GPL
Groups          : None
Provides        : initramfs
Depends On      : awk  mkinitcpio-busybox>=1.19.4-2  kmod  util-linux>=2.23  libarchive  coreutils  bash  binutils  diffutils  findutils
                  grep  filesystem>=2011.10-1  zstd  systemd
Optional Deps   : gzip: Use gzip compression for the initramfs image [installed]
                  xz: Use lzma or xz compression for the initramfs image [installed]
                  bzip2: Use bzip2 compression for the initramfs image [installed]
                  lzop: Use lzo compression for the initramfs image
                  lz4: Use lz4 compression for the initramfs image [installed]
                  mkinitcpio-nfs-utils: Support for root filesystem on NFS [installed]
Required By     : linux-lts  linux-zen  mkinitcpio-archiso
Optional For    : None
Conflicts With  : None
Replaces        : None
Installed Size  : 154,94 KiB
Packager        : Levente Polyak <anthraxx@archlinux.org>
Build Date      : lun 18 dic 2023, 00:01:40
Install Date    : mer 20 dic 2023, 19:57:26
Install Reason  : Installed as a dependency for another package
Install Script  : Yes
Validated By    : Signature

The culprit was penguin-eggs…

LANG=C yay -R mkinitcpio mkinitcpio-archiso
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: removing mkinitcpio-archiso breaks dependency 'mkinitcpio-archiso' required by penguins-eggs
 -> exit status 1

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.