@linesma I appreciate your help, and I don’t mean to be making this difficult. This is a lot of new tools and circumstances for me, and I would be sinking without help of this forum. In general, is there some best practices for making these posts that will increase the quality in the future?
@ricklinux @manuel Sorry, it seems I neglected to post the results of that command. Here’s the results.
System: Kernel: 5.4.72-1-lts x86_64 bits: 64 compiler: gcc v: 10.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d23990b1-6eb1-4936-95ef-4ef36fa3f55f rw quiet loglevel=3
nowatchdog
Console: tty 4 DM: LightDM 1.30.0 Distro: EndeavourOS
Machine: Type: Laptop System: Dell product: Inspiron 7580 v: N/A serial: <superuser/root required> Chassis: type: 10
serial: <superuser/root required>
Mobo: Dell model: 04K0W3 v: A00 serial: <superuser/root required> UEFI: Dell v: 1.6.0 date: 03/24/2019
Battery: ID-1: BAT0 charge: 40.1 Wh condition: 40.1/42.0 Wh (96%) volts: 12.6/11.4 model: SMP DELL Y3F7Y6B type: Li-ion
serial: 19118 status: Full
CPU: Info: Quad Core model: Intel Core i7-8565U bits: 64 type: MT MCP arch: Kaby Lake family: 6 model-id: 8E (142)
stepping: B (11) microcode: D6 L2 cache: 8192 KiB
flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31999
Speed: 800 MHz min/max: 400/4600 MHz Core speeds (MHz): 1: 800 2: 800 3: 801 4: 800 5: 800 6: 800 7: 800 8: 800
Vulnerabilities: Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf status: Not affected
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel UHD Graphics 620 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:3ea0
Device-2: NVIDIA GP108M [GeForce MX250] vendor: Dell driver: N/A alternate: nouveau, nvidia_drm, nvidia
bus ID: 01:00.0 chip ID: 10de:1d13
Device-3: Microdia Integrated_Webcam_HD type: USB driver: uvcvideo bus ID: 1-6:4 chip ID: 0c45:671f
Display: server: X.org 1.20.9 driver: nvidia tty: 240x67
Message: Advanced graphics data unavailable in console. Try -G --display
Audio: Device-1: Intel Cannon Point-LP High Definition Audio vendor: Dell driver: snd_hda_intel v: kernel
alternate: snd_sof_pci bus ID: 00:1f.3 chip ID: 8086:9dc8
Sound Server: ALSA v: k5.4.72-1-lts
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Dell driver: r8169 v: kernel port: 3000
bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: 6c:2b:59:70:7c:d0
Device-2: Intel Wireless-AC 9260 driver: iwlwifi v: kernel port: 3000 bus ID: 03:00.0 chip ID: 8086:2526
IF: wlan0 state: down mac: 36:8d:83:cb:a1:e2
Device-3: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb bus ID: 1-10:5 chip ID: 8087:0025
Drives: Local Storage: total: 535.67 GiB used: 7.02 GiB (1.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 model: PC SN520 NVMe WDC 512GB size: 476.94 GiB block size: physical: 512 B logical: 512 B
speed: 15.8 Gb/s lanes: 2 serial: 184353447702 rev: 20200012 scheme: GPT
ID-2: /dev/sda type: USB vendor: SanDisk model: Cruzer Glide size: 58.73 GiB block size: physical: 512 B
logical: 512 B serial: 4C530000091008117410 rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition: ID-1: / raw size: 476.64 GiB size: 468.16 GiB (98.22%) used: 7.02 GiB (1.5%) fs: ext4 dev: /dev/nvme0n1p2
Swap: Alert: No Swap data was found.
Sensors: System Temperatures: cpu: 39.0 C mobo: N/A
Fan Speeds (RPM): cpu: 0
Info: Processes: 148 Uptime: 5m Memory: 7.50 GiB used: 217.2 MiB (2.8%) Init: systemd v: 246 Compilers: gcc: 10.2.0
Packages: pacman: 799 lib: 230 Shell: Bash v: 5.0.18 running in: tty 4 inxi: 3.1.08
This is the output of journalctl | grep -i "oct 27" | grep -i nvidia
Oct 27 07:14:29 skyedev systemd-udevd[290]: Error running install command '/bin/false' for module nvidia: retcode 1
Oct 27 07:14:29 skyedev systemd-udevd[290]: Error running install command '/bin/false' for module nvidia: retcode 1
Naturally, my logs have a lot of information, so I imagine its best to grep for whats useful. What other information can I provide?