Anyone managed to boot into the live environment on a Ryzen 7000 iGPU?

I tried to boot on the current latest version (Artemis nova 22.9) with the UEFI default and it stops at:
“hub 12-0:1.0: config failed, hub doesn’t have any ports! (err -19)”

My first assumption was that this is probably not the issue, so I attempted to boot with ‘nomodeset’.

With this one, I got farther (still got the line above, but it didn’t stop there), but started crashing as it’s starting the X.Org server.

I have the following errors in the log:

[    89.856] (II) LoadModule: "fbdev"
[    89.856] (WW) Warning, couldn't open module fbdev
[    89.856] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    89.856] (II) LoadModule: "vesa"
[    89.857] (WW) Warning, couldn't open module vesa
[    89.857] (EE) Failed to load module "vesa" (module does not exist, 0)
[    89.857] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
	ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
...
	ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
	MULLINS, KAVERI, HAWAII
[    89.857] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    89.857] (EE) open /dev/dri/card0: No such file or directory
[    89.857] (WW) Falling back to old probe method for modesetting
[    89.857] (EE) open /dev/dri/card0: No such file or directory
[    89.857] (EE) Screen 0 deleted because of no matching config section.
[    89.857] (II) UnloadModule: "modesetting"
[    89.857] (EE) Device(s) detected, but none match those in the config file.
[    89.857] (EE) 
Fatal server error:
[    89.857] (EE) no screens found(EE) 
[    89.857] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    89.857] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    89.857] (EE) 
[    89.858] (EE) Server terminated with error (1). Closing log file.

Welcome to the community!

That ISO may not be new enough. You need very new versions of linux-firmware and mesa to boot that configuration.

Thanks for your reply :slight_smile:
Do you know where I can find said newer versions, or do I need to build a new ISO myself ?

I don’t think there is a newer one available.

You can either build one or I can build one for you.

I think this is a good chance for me to visit the arch wiki and learn how to build one myself.
Do you have any pointers to get me started?
Thanks a lot for your help!

1 Like

Yes. Follow the instructions here:

You will need to edit packages.x86_64 and remove ipw2100-fw and ipw2200-fw

2 Likes

I’ll give it a shot this afternoon and see where that gets me.
Thanks again for your help.

2 Likes

Ok, in the end, I managed to create a new EndeavorOS ISO from ‘main’ branch and this time reached the Desktop environment (^_^)/

The only problem I saw so far is that I could not get Wi-Fi to work, as I assume the hardware is still to new, but that’s nothing a LAN cable can’t fix until I get that sorted.

5 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.