# After Install, I restarted but was given this as it turned on

**URL:** <https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136>\
**Category:** EndeavourOS installation\
**Created:** [November 2, 2025, 5:58pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136 "2025-11-02T17:58:49Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 5:58pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/1 "2025-11-02T17:58:49Z")

</div>

Image

 ![17621061426991601861496748381549](https://forum.endeavouros.com/uploads/default/original/3X/0/0/00675b3c44e8d179c1248b48b3f99f40ce315a95.jpeg)

I’ve redone it, multiple times time now and I end up here or the install window, any help or idea on what to do next would be greatly appreciated.

---

<div class="post-metadata">

**Author:** ![keescase](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/keescase/32/114900_2.png) [@keescase](https://forum.endeavouros.com/u/keescase)\
**Post date:** [November 2, 2025, 6:11pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/2 "2025-11-02T18:11:50Z")

</div>

Some information about the message shown on your screenshot.  
[https://www.computerhope.com/issues/ch000706.htm](https://www.computerhope.com/issues/ch000706.htm)

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 8:06pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/3 "2025-11-02T20:06:28Z")

</div>

I’ve done what it said but still no luck.

I’ve fully installed it but when I restart it sends me back to the install window from the USB drive.

I’m using a dell laptop

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [November 2, 2025, 8:12pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/4 "2025-11-02T20:12:27Z")

</div>

That looks like your drive is either failed or just not configured to properly boot from.

Did you use manual partitioning in the installer? If so, you probably didn’t configure something correctly.

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 8:16pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/5 "2025-11-02T20:16:49Z")

</div>

Nope I used the online installer

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 8:17pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/6 "2025-11-02T20:17:23Z")

</div>

How would I go about checking if it is?

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [November 2, 2025, 8:20pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/7 "2025-11-02T20:20:07Z")

</div>

> [@Willow](#):
>
> Nope I used the online installer

The online installer supports manual partitioning. Which option did you choose on the partitioning screen? “Erase disk”, “Install alongside”, “Replace partition” or “Manual”.

> [@Willow](#):
>
> How would I go about checking if it is?

If you boot off the install ISO again, can you see the drive?

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 8:22pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/8 "2025-11-02T20:22:10Z")

</div>

> [@dalto](#):
>
> Install

I had picked “erase disk”

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 8:26pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/9 "2025-11-02T20:26:21Z")

</div>

Ok I’m checking now about the drive

 ![17621151349251098518847466271993](https://forum.endeavouros.com/uploads/default/original/3X/f/b/fbb4e55f0dea607c4388bdb0c4e3e54a23dac5e4.jpeg)

This is what it says

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [November 2, 2025, 8:34pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/10 "2025-11-02T20:34:22Z")

</div>

Yeah, that looks like hardware failure.

Is it an SSD?

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 8:35pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/11 "2025-11-02T20:35:05Z")

</div>

I think so

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 8:47pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/12 "2025-11-02T20:47:39Z")

</div>

![17621163976065981940427820148204](https://forum.endeavouros.com/uploads/default/original/3X/9/1/913454421674fb6c1dc18568f79437d1b8d762b2.jpeg)

This is what comes up when I start up my laptop

---

<div class="post-metadata">

**Author:** ![dalto](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/dalto/32/5577_2.png) [@dalto](https://forum.endeavouros.com/u/dalto)\
**Post date:** [November 2, 2025, 8:51pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/13 "2025-11-02T20:51:55Z")

</div>

That is the install ISO boot screen when booted in legacy/CSM mode.

---

<div class="post-metadata">

**Author:** ![joekamprad](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/joekamprad/32/77608_2.png) [@joekamprad](https://forum.endeavouros.com/u/joekamprad)\
**Post date:** [November 2, 2025, 9:02pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/14 "2025-11-02T21:02:32Z")

</div>

could be some confusion with CSM legacy mode and EFI.. in case some boards have the option to have CSM enabled only for usb and in addition for general boot.. you should always use efi mode instead for all if possible.

but the firmware output shows it does not detect any harddrive it seems.

---

<div class="post-metadata">

**Author:** ![Willow](https://forum.endeavouros.com/letter_avatar_proxy/v4/letter/w/c37758/32.png) [@Willow](https://forum.endeavouros.com/u/Willow)\
**Post date:** [November 2, 2025, 9:56pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/15 "2025-11-02T21:56:25Z")

</div>

I’ve been trying to figure it out but I don’t know this my first time trying to install something like this

---

<div class="post-metadata">

**Author:** ![ricklinux](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/ricklinux/32/110798_2.png) [@ricklinux](https://forum.endeavouros.com/u/ricklinux)\
**Post date:** [November 3, 2025, 1:03am UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/16 "2025-11-03T01:03:58Z")

</div>

What is the hardware?

---

<div class="post-metadata">

**Author:** ![joekamprad](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/joekamprad/32/77608_2.png) [@joekamprad](https://forum.endeavouros.com/u/joekamprad)\
**Post date:** [November 3, 2025, 10:50am UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/17 "2025-11-03T10:50:08Z")

</div>

We know firmware/efi implementations can be done poorly..

May it had can enabled for USB, but secure boot still active ?

---

<div class="post-metadata">

**Author:** ![ArchieLinux](https://forum.endeavouros.com/user_avatar/forum.endeavouros.com/archielinux/32/107416_2.png) [@ArchieLinux](https://forum.endeavouros.com/u/ArchieLinux)\
**Post date:** [November 3, 2025, 1:26pm UTC](https://forum.endeavouros.com/t/after-install-i-restarted-but-was-given-this-as-it-turned-on/76136/18 "2025-11-03T13:26:11Z")

</div>

Fwiw, after power outages I often get a very similar start up error on my Dell Optiplex. I need to change (on the set up options) from Legacy to EFI boot up and ensure the boot sequence includes the proper hard drive early in the line up. For some reason these settings get messed up without proper shut down.

I don’t get the cable alert and so this may have nothing to do with the OP’s issue, but thought it worth mentioning if it helps.
